Used Pneumatic Press Stanze With Tools for sale (49,003)

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy Godpfx Aefv Av Ssk Tjui • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: ready for operation (used), Schüco tools, pressing tools, stamping tools, Art. No. 293900, 290146-02, 299259, 290146, 293338, 293902, 296198, 299905, 296168, 293901, 280162, 296548, 293354, 287568, 290146-02, 296170, 296159, 297755, 293807, 296199, 299372, 293899, 282028-04, 283072-02, 280222-05 and 5 pieces without a number. Gsdpfxjd Sc D Se Ak Teui

Condition: used, Die-cutting machine – Swivel frame die-cutting machine – Flatbed die-cutting machine – Toggle press – Eccentric press Die-cutting machine + feeder for use with strip-type die-cutting tools Flatbed die-cutting machine HELMERDING, type PSH 25 Item no. EP 97784, Machine no. 6073, Year of manufacture 1998 Pressing force 25 tons Distance between tie rods 700 mm Table area = installation space 800 x 670 mm Table area = installation frame, width 510 x depth 440 mm, plate thickness 20 mm Punch area 800 x 670 mm Through-hole in the table 490 x 420 mm Punch stroke 45 mm Punch adjustment distance 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min Godpfedzqmzox Ak Teui Motor power 15 kW Mains connection 400 volts, 50 Hz - controlled drive for stepless stroke rate adjustment - pneumatic clutch-brake combination - punch equalizing cylinder - automatic central lubrication system VOGEL - massive base plate with 4 vibration damping elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons Good condition Previously, the machine was used for die-cutting cardboard sheets. Ideal for die-cutting non-woven fabrics or similar materials for respiratory masks.

Condition: good (used), Schmedt PraForm HHS 2100 book press with joint forming Perfect condition, purchased from a warehouse, used as a backup. Book press with groove burner. Manufactured by Schmedt, Germany. Technical data: Guedpfx Aksz N Skce Tji max format: 400x 520x 100 mm Weight 250 kg Power supply 380 V + compressed air.

Condition: used, Bending tool, die, lower knife, lower tool, prism tool Guodpfx Aefcd Inok Tji -Tool for: press brake -Groove: W/D 9 x 12, 5 x 8, 17 x 20 mm -Length: 3 x 835 mm, 1 x 272 mm -Width/height: 60 mm -Drawing: with the pictures -Weight: 67.5 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool Gjdpfxofn Am Ds Ak Teui -Tool: split, for press brake -Tool angle: 60° -Drawing: in the photos -Dimension: 25 x 165 mm -Length: 3562 mm (each 1 x 1818/800/387/190/122/85/60/55/45 mm) -Weight: 124 kg

Condition: used, Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prism groove: 7/10 mm -Square: 66 x 26 mm Gujdjctvqpepfx Ak Toi -Length: 2505 mm -Weight: 24 kg

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V Gedpfx Akep Aul Ae Tjui

Condition: excellent (used), CATALOGUE NUMBER 7992 TECHNICAL DATA - Loading areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic vertical clamps: 2 x 6 pcs - Max. length of glued elements: 3600 mm Gsdps Af I U Eefx Ak Teui - Max. height of glued elements: 1500 mm - Max. thickness of glued elements: 130 mm - Guides for gluing thin elements - Dimensions (L/W/H): 4300x1570x2110 mm - Weight: 1400 kg ADVANTAGES – Two work areas – Gluing length: 3600 mm – Pneumatic cylinders – Guides for gluing thin elements – Unpainted – Mobile – on wheels – Used press, very good condition Net price: 14900 PLN Net price: 3465 EUR Net price calculated according to the exchange rate of 4.30 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment Guedpszk Eqmofx Ak Toi - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: good (used), Year of construction: 2001, Hydro-pneumatic drive Operation via foot valve Guedpfez D Aztox Ak Tei Rod force at 10 bar = 50 kN Maximum installation height: 140 mm Rod stroke: 40 mm Outreach: 110 mm Includes: Base frame Rotating table for 5 tools

Condition: like new (used), functionality: fully functional, Press No. 35 – 173 - 98 Year of manufacture 1998 Gsdoz Hbb Djpfx Ak Teui Max. stroke 60 mm Pressing force 45 kN Max. operating pressure 6 bar

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, Gedpfx Akez Srv Dj Tsui 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, Gjdpfx Akjz St Hws Tsui coolant, Low Volt light.

Condition: excellent (used), For sale is a complete, industrial pneumatic press in a workshop configuration, ideal for punching, stamping, pressing, or other assembly processes. The set includes: • a pneumatic column press with a robust, steel construction • a control valve, actuator, and pneumatic distribution system • an integrated control panel with an emergency stop switch • a steel work table with adjustable side guides • a power cabinet, distribution board, and cable routing • a table on wheels with a transport brake Gusdpjz Sawdefx Ak Toi Drive: pneumatic power supply Control: solenoid valves, start/stop buttons Power supply: 230 V (electrical system integrated into the base) Technical condition: very good. Used, fully functional set ready for operation in a workshop. Industrial design, not for amateur use.

Condition: used, Year of construction: 2003, Pneumatic Tool Gusdpfx Akow S Nk Uj Tei Manufacturer: BAND-IT Type: S750 Air Tool Year of manufacture: 2003 This foot-operated standard pneumatic tool applies the full range of BAND-IT Junior and Junior Smooth pre-formed clamps. Technical specifications: - Adjustable air regulator and pressure gauge ensure consistent tool performance. - Foot pedal provides better control over clamp placement. - Installs 5 clamp widths with smooth inside diameters ranging from 1/4" to 3/4". - Tool features: ergonomic design, automatic tensioning. - Manual cut-off handle, permanent locking mechanism. - Can be integrated into production systems. - 100–125 psi line pressure. Equipment & Accessories: - Operating manual in English included In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Guodpfx Aksz R Rbdo Tei Spindle taper BT40, 24 station ATC.

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm Gjdpfey Umf Asx Ak Toui stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Condition: used, Year of construction: 2019, machine/vehicle number: 269913, functionality: fully functional, power: 0.5 kW (0.68 HP), input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, total length: 1,140 mm, total width: 1,380 mm, total height: 1,440 mm, overall weight: 230 kg, Equipment: CE marking, PONY BP-B Professional Garment Press (2019) Industrial Steam-Pneumatic Press for Trousers, Waistbands & Structured Garments The PONY BP-B is a professional industrial garment pressing machine manufactured by PONY S.p.A., Italy in 2019. Designed for continuous production environments, this steam-pneumatic press delivers high-quality finishing for trousers, waistbands, jackets, coats, and other structured garments. The machine combines steam, compressed air, and an integrated vacuum system to produce consistent, wrinkle-free finishing results with high productivity. The machine has been used in professional garment manufacturing and remained fully operational until the factory shutdown. Technical Specifications • Manufacturer: PONY S.p.A. • Model: BP-B • Year: 2019 • Serial Number: 269913 • Country of Manufacture: Italy • Power Supply: 230 V, Single Phase, 50 Hz • Power Consumption: 0.5 kW • Working Steam Pressure: Up to 5 bar • Pneumatic Operation: External compressed air required • Vacuum System: Integrated Lowara vacuum unit • Weight: Approximately 230 kg Key Features • Professional steam-pneumatic garment press • Integrated vacuum extraction system • Steam-heated pressing head and buck • Designed for trouser tops, waistbands, jackets, and structured garments • Adjustable pneumatic pressing pressure Godpfxszkhy Rj Ak Toui • Foot pedal operation • Dual safety hand controls • Emergency stop button • Heavy-duty industrial construction • Suitable for continuous production environments • Includes • PONY BP-B garment press • Integrated Lowara vacuum system • Steam and pneumatic connections • Foot pedal controls • Industrial cabinet base • Safety guards • Electronic controls Applications • Trouser finishing • Waistband pressing • Jacket finishing • Coat finishing • Workwear production • Garment manufacturing • Commercial laundries • Textile finishing departments Condition • Fully functional • Previously used in professional garment production • Serviced on 27.02.2026 • Video recorded in operation on 05.03.2026 • Good industrial condition • Normal cosmetic wear consistent with factory use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for disconnecting steam, compressed air, and electrical connections, dismantling, loading, transportation, and all related costs. Professional dismantling is recommended due to the machine's industrial utility connections. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: repair required (used), Year of construction: 1987, functionality: not functional, machine/vehicle number: TCC1023, overall weight: 9,000 kg, Thread and Ball Screw Grinding Machine – 2,300 mm Working Length Technical Specifications: Working length: 2,300 mm Maximum diameter: 400 mm Application: Grinding of threaded spindles and ball screws Machine Condition: This machine was previously used for precision grinding of threaded spindles and ball screws. The machine is mechanically fully functional and complete, with all mechanical components and accessories present. Gujdpfxj Ai Rmcj Ak Tei The electrical control cabinet is missing and will need to be replaced to restore the machine to operational condition. Complete technical documentation is available with the machine. The machine is offered for sale in its current condition, as is. For further information, additional photographs, or to arrange an inspection, please feel free to contact us.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Godpfx Akezrpt Us Tjui Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: used, Bending tool, die, upper knife, upper tool, straight tool for press brake -Transfer in current condition as seen -Tool with damage see photos -divided -Tool: 30° -Dimensions: 196 x 26 mm -Total length: 4158 mm -Lengths: 1000/690/557/348/335/307/200/160/125/111/100/100/85/40 mm -Weight: 104 kg Gsdpsc Ui N Esfx Ak Toui

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg Godpfx Aefv Awask Tjui dimensions 160 x 230 mm

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons Gsdpfx Aodzp Tcsk Teui The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Bending tool, die, lower knife, lower tool, prism tool Gedefckflspfx Ak Teui -Tool for: press brake -Prisms: 90° 12 mm -Drawing: in the photos -Length: 4200 mm (2 x 2100 mm) -Dimension: 20 x 75 mm -Weight: 44 kg