Used Pneumatic Punch for sale (8,326)

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH Hodpfswcxccex Aadofc The machine is connected to the power supply and can be tested.

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Hjdeux Sfzjpfx Aadofc Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: as good as new (ex-display), Festo pneumatic cylinders RA1941 Manufacturer: Festo cylinders Some still Orginalverpackt alongside prices are per piece. 8 x ADVU-25-10-P-A 86,39€ 7 x ADVU-40-15-P-A 128,46€ 8 x ADVU-40-20-A-P-A 131,49€ 4 x ADVU-25-20-A-P-A 89,60€ 8 x DNC-63-160-PPV-A 198,00€ 1 x DNC-50-125-PPV-A 165,03€ 7 x DNC-40-80-PPV-A 139,50€ 1 x DNC-40-200-PPV-A 149,01€ 2 x DNU-32-50-PPV-A price on request 3 x STA-50-30-P-A-SA Price on request 1 x FENG-40-200-KT+DNC-40-200-99A 624,99€ 1 x FENG-40-200-KT 474,99€ 4 x DMM-25-15-P-A 46,38€ 1 x DFM-32-50-PA-GF 228,55€ 8 x DNC-32-40-PPV-A 120,54€ 1 x DNC-32-50-PPV-A 121,15€ 10 x DNC-32-80-PPV-A 122.93€ 10 x DNC-40-50-PPV-A 137,13€ 3 x DNC-50-80-PPV-A 160,87€ 2 x DNC-50-50-PPV-A 157,85€ 5 x DSNU-25-25-PPV-A 43,28€ 4 x ESNU-25-20-P-SA Price on request 1 x DSNU-25-10-P-A 36,59€ 2 x DSNU-20-20-P 34,65€ 1 x ESNU-16-25-P Price on request 1 x DSNU-20-20-P-A 34,65€ 1 x DSNU-20-50-PPV-A 40,77€ 2 x DGPL-40-450-PPVA-KFB price on request 7 x DNC-40-500-PPV-A 172,76€ 7 x DSNU-32-80-PPV-A 52,08€ 4 x DSNU-32-60-PPV-A 57,12€ 6 x DZF-25-12-A-P-A 110,52€ Hfodpfok Abl Nex Aadoc 1 x DZF-32-A-?-A price on request 2 x DZF-32-125-P-A-SA 126,57€ 2 x DSNU-25-125-PPV-A 45,05€ 1 x DSNU-25-125-PPV-A+2 SENSORS 101,30€ 1 x DSNU-25-300-PPV-A 48,35€ 1 x DNC-63-160-PPV-A-KP 815,28€ 2 x DNC-63-160-PPV-A 198,01€

Year of construction: 1995, condition: ready for operation (used), Immediately available at location: Hfjdpfx Asyg Eiijadjc Boschert punching nibbling machine Type KST 40 / 750 PowerLine digital Year of manufacture 1995 Press force 40 tons Stroke height 40 mm Punch diameter max 105 mm Sheet thickness max 10 mm Extension tables left and right Quick-change system Digital backgauge system x-axis 0 – 1500 mm left y-axis 0 – 750 mm Tools Weight 3 tons At the price of Euro 2,000.-- plus VAT ex location.

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame Hfjdpfxshb N Ats Aadec -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm -Weight: 94 kg

Condition: used, Year of construction: 1990, serial number 28043 weight 3 t Hedpspxri Hsfx Aadsfc pressure 30 t volt 380 V frequency 50 Hz

Condition: good (used), Year of construction: 1988, Ja Stanzkraft 800 kN frequency 50 Hz current 17/11 A Hodpjryaqyefx Aadsfc voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Year of construction: 1988, 220 V frequency 50 Hz combination machine ja extensive accessories ca. 50 Sätze pressure 50 t Hfsdpfx Asndz Npoadjc

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 Hfodpox U A H Njfx Aadsc +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2004, Max. punching force: 500kN, max. punching stroke: 200mm, die support dimensions: 13,200x1500mm, conveyor belt dimensions: 7435x1995mm, max. punching area: 1800x750mm, max. strokes: 80/min, connected load: 34kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 52,680h, with documentation. Equipped with extraction system, rotatable tool enabling nesting, tension-free unwinding possible. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Hodpfx Aow Sxyfoadjfc

Year of construction: 1997, condition: ready for operation (used), A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible. Hfedpfx Aaevnd Snedsc

Condition: ready for operation (used), Mechanical press/eccentric press by Stankoimport, model: 2225 (СТАНКОИМПОРТ Модель 2225). Material capacity: sheet thickness/width 18/190mm, max. tensile strength 500MPa. An inspection can be arranged by appointment. Hfjdpfx Aajxtpryodec

Year of construction: 2001, condition: ready for operation (used), Max. cutting force: 220kN, laser power: 3200W, nitrogen connection: 30bar, oxygen connection: 20bar, connected load: 76kVA, operating hours at the beginning of 2025: 67,766h, with Trumpf TLF 3200 laser and RIEDEL L 15/21 TR3/19.00 cooler, refrigerant: R134a, filling weight: 11.5kg, high pressure: 20.2bar. Tools additionally available. An on-site inspection is possible. Hfjdpjw Uk A Rofx Aadjc

Condition: ready for operation (used), A complete punching system with a grid punch is available. 1) Reel Gebrüder Kemmerich 7VID, year of manufacture: 1981, max. load: 1000kg. 2) Straightening machine, max. material width: 300mm, max. material thickness: 2mm. 3) Feed unit Alba UVHY 300/0.1, feed speed: 6.5m/min, max. material width: 300mm, max. material thickness: 4mm, transport rollers: 2. 4) Punching grid HR 50/600 NL, stroke rate: 300/min, stroke: 30mm-80mm. On-site inspection is possible. Hodpfx Aajw Az R Aodofc

Condition: ready for operation (used), Year of construction: 2000, Materials: paper/cardboard/solid board/corrugated board, min. paper weight: 80g/m², max. cardboard and solid board weight: 2000g/m², max. corrugated board thickness: 4mm, stack height at feeder/outfeed: 1700mm/1800mm. Punching force: 400t, min. sheet size: 350mm/400mm, max. sheet size: 820mm/1130mm, machine speed: 9000 sheets/h. Documentation available. On-site inspection is possible. Expected to be available from August 2025. Hfodjv D I Dyjpfx Aadoc

Year of construction: 2010, condition: ready for operation (used), A CNC turret punching machine Amada and an automatic loading and unloading unit LKI Käldman (Amada) are available. 1) CNC turret punching machine Amada EMZ3610, year of manufacture: 2010, pressing force: 300kN, travel X/Y: 2500mm/1525mm, travel X/Y with repositioning: 5000mm/1525mm, max. material thickness: 4.5mm, max. table load: 160kg. Traversing speed X/Y: 100m/80m/min, axis speed: 128m/min, positioning accuracy: +/-0.1mm. Turret stations 45, auto-index stations: 2xB/2xC, turret speed: 30rpm, stroke rate: 1000 strokes/min, machine weight: approx. 21000kg. 2) Loading and unloading system LKI Käldman (Amada) MP Sheetcat 3015, year of manufacture: 2017, min. sheet dimensions X/Y: 1000mm/300mm, max. sheet dimensions X/Y: 3050mm/1525mm, sheet thickness: 0.8mm-6mm, max. sheet weight per pallet: 3000kg, suction cups: 34, machine dimensions X/Y/Z: approx. 8400mm/3600mm/3100mm. Documentation available. On-site inspection is possible. Hfjdpfxjv Rp Tcj Aadsc

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Hedpfx Aexq Exwsadsfc

Condition: ready for operation (used), A fully automatic hot stamping and punching machine Baier Maschinenfabrik is available. Max. material width: 250mm, max. punching width: 240mm, heating power: 2200W, stamping force: 100kN. On-site inspection is possible. Hfodpfx Aaowlihzjdsc

Condition: ready for operation (used), A hydraulic multi-purpose punching machine Geka is available. Punching force: 70t, angle shearing capacity: 150mm/150mm/13mm, flat bar shearing capacity: 450mm/15mm, round bar shearing capacity: 45mm, square bar shearing capacity: 45mm, punching station capacity hole diameter/material thickness: 28mm/20mm, beam and profile steel shearing capacity I-beam/U-beam: 120mm/120mm, bending station capacity: 250mm/15mm, notching station capacity: 250mm/250mm/6mm. Machine dimensions X/Y/Z: approx. 2000mm/1200mm/2000mm, weight: approx. 2000kg. An on-site inspection is possible. Hfedsyb Sc Eopfx Aadec

Condition: ready for operation (used), A Finn-Power CNC punching press is available. Press force: 300kN, max. workpiece width: 4061mm, max. workpiece length: 1528mm, max. workpiece thickness: 8mm, max. workpiece weight: 200kg, quick chuck X/Y: 80m/min/60m/min. Turret head positions: 20, turret head speed: 30rpm, tool type: thick turret, max. tool diameter: 89mm. Travel speed: 100m/min, drilling accuracy: 0.1mm, positioning accuracy: 0.08mm, oil tank capacity: 330l, max. operating pressure: 300bar. Machine dimensions X/Y/Z: approx. 5900mm/6300mm/2500mm, weight: approx. 13500kg, control: Siemens Sinumerik 840D. The table of the machine has been extended. Without machine housing. Documentation available. On-site inspection is possible. Hjdpfxovf Ix Ho Aadofc

Condition: ready for operation (used), A cart beam die-cutter Schön is available for die-cutting envelopes, leather, textiles, foams, rolls and sheets. Pressing force: 300kN, max. sheet format X/Y: 1400mm/1000mm, pressure plate rotation speed: 200°/s, repeat accuracy: +/-1°, return stroke speed: 200mm/s, machine dimensions X/Y/Z: approx. 4200mm/2500mm/2500mm, weight: approx. 5500kg. Documentation available. On-site inspection is possible. Hfodpfx Aaow Azuuedjc

Condition: ready for operation (used), Punching force: 500kN, throat depth: 610mm, stroke: 60mm, max. hole diameter in steel thicknesses 15mm/9mm/4.5mm: 30mm/50mm/100mm, max. material thickness: 15mm. Machine dimensions X/Y/Z: approx. 1100mm/1550mm/1750mm, weight: approx. 1650kg. An on-site inspection is possible. Hfsdpsw U T Uvofx Aadsc

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Hsdpfx Aaew Sxyljdofc

Year of construction: 2004, condition: ready for operation (used), An NDC hydraulic punch is available. Weight: approx. 1750kg. An on-site inspection is possible. Hodpfx Aasxfbcnodofc

Year of construction: 1992, condition: ready for operation (used), A complete punching system with a grid punch is available. 1) Double reversible decoiler, load capacity: 1000kg. 2) Alba GGVHY 200 straightening machine, year of manufacture: 1992, feed rate: 6.5m/min, max. material width: 200mm, max. material thickness: 4mm, transport rollers: 2. 3) Alba MA RIA 7 feed, year of manufacture: 1978, max. material width: 300mm, max. material thickness: 3mm, feed rate: 40m/min, control: Siemens S7. Material thickness: 3mm, feed speed: 40m/min, control: Siemens S7 with OP7. 4) Punching machine Raster HR 80/700 NL, year of manufacture: 1992, pressing force: 80t, stroke rate: 250/min, table dimensions X/Y: 730mm/750mm, ram dimensions X/Y: 730mm/630mm, ram stroke: 40mm, ram adjustment: 80mm. 5) Profiling machine CIS. Documentation available. On-site inspection is possible. Hedow Az Rvjpfx Aadofc