Used Pneumatic Punch for sale (8,283)

Condition: good (used), Year of construction: 2000, Used punching and cutting line from Voortman | CNC FLAT BAR PUNCH & SHEAR LINE Capacity: flat 500 x 22mm square 150 x 150 x 15 mm Including numerator Tedpfx Asv Rhabjacod Video available on request

Condition: used, I am offering spare parts for a TC 2000R: control cabinet, clamping feet, motor with gearbox for Y-axis, motor for C-axis (lower), die holder, punch holder, complete stripper assembly, linear amplifier, tool lubrication system, and control panel. Tsdjxn Tqiepfx Aacjd

Condition: used, Year of construction: 2002, The equipment described is a register punch manufactured by Bacher. This specific model is known as the ZollRegister punch Control 2000 Zoll and was produced in the year 2002. The machine has a size of 1400 mm. It is currently in stock and located in Germany. The register punch is reported to be in good condition, suggesting that it has been well-maintained and is ready for use. Format: 1400 mm Equipment: Tjdpfx Aaswzxzpocjd Register punch Good condition

Condition: used, New: Yes Empty weight: 6 kg Part suitable for: trucks Tsdpexh Evwefx Aacsd Super-L 1" impact wrench W/6" Anvil (Twin hammer) Free speed 7.500RPM Max. torque 1763Nm (1300 ft-lb) Air inlet 3/8" Air hose 1/2" Air consumption 160 LPM (5.6 CFM) Overall length 441.6mm (17.4") Article nr.: Z99999044N-veiling Pneumatic impact wrench 1 " Super-L

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate Tjdpfx Aaswrn U Hscjd -Thrust: 500 mm -Accessories: incl. see photos -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Tsdpfx Aexf Ur Ajacsd Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Tsdpjvam Enjfx Aacsd Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Max. hole diameter 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching Todpfx Aslzc Dceacsd 16 mm Motor power 8 kW Weight 5500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 21,346 h, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Tsdoxhmtwjpfx Aacsd Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, New: Yes Empty weight: 2 kg Part suitable for: trucks V4800 Pneumatische slagmoersleutel 1/2" Maximaal koppel 1200.0 Nm Werkdruk 6.3 bar Luchtverbruik 184.0 l/min. Sleutel lengte 185.0 mm Gewicht 2.1 kg Snelheid van omwenteling 7500.0 omw./min. Tsdpfxsxhzhvj Aacsd Luchtinlaat 1/4 inch Article nr.: VIGORV4800-veiling Pneumatic impact wrench 1/2" 1200NM

Condition: new, pressure 8,5 kN stroke 40 mm Tjdpefv Awaefx Aacsd throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Tjdjxf Up Uspfx Aacsd Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Blow energy: 4000 kg/m Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Die height: 350 mm Tedpfx Aevam Ezsacjd Ram weight: 1760 kg Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: good (used), Year of construction: 1989, Punching machine Manufacturer: Amada Model: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 kN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminium) max.: 3 mm Travel axes: 1,270 x 1,000 mm Turret: 20-station (2x rotatable B-stations) Tedporxrgdjfx Aaced Incl. complete tooling set! Power: 11 kVA Dimensions (LxWxH): 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg base plate 221025ä

Condition: good (used), functionality: fully functional, total height: 730 mm, throat depth: 90 mm, installation height: 120 mm, pressing force: 1 t, overall weight: 50 kg, total width: 300 mm, total length: 350 mm, table width: 100 mm, table length: 135 mm, stroke length: 12 mm, compressed air connection: 8 bar, air pressure: 8 bar, Technical data : power 15 kN max. nominal pressure at 8 bar power connection 220 volt . mounting , round 15 mm throat 90 mm ram stroke approx. 12 mm table approx. 100 x 135 mm . Max. Installation height 170 mm Plunger top Adjustment upper part approx. 100 mm . Width x depth approx. 0.3 x 0.35 m Height approx. 0,73 m Weight estimated approx. 50 kg . Maintenance unit Foot switch with pneumatic release (2-hand is not safe for manual insertion) Stroke counter . .. Tedpfxjxiw Uzs Aacjd Ongoing purchase of German second-hand machines without NC or CNC controls

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 .: 43 881 Stroke: 110 mm Tsdpfx Aexay Ulsacjd -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 267/80/H70 mm -Weight: 2.1 kg/piece

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life Tedpfxefv Av Ss Aacsd • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Tsdexg D Dwepfx Aacod Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Tsdpfx Ajvam Ebjacod Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment Tsdoxb Ucaopfx Aaced - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: used, Year of construction: 2011, Overview  This pneumatic press was manufactured in 2011 by the Italian company ATI. The machine has been inspected and serviced by the technical service and is in very good condition. It is designed for gentle and efficient pressing of grapes and other fruits, making it suitable for wineries and juice production. The press is immediately available. Technical data  Capacity: 45 hL Design: Open tank with axial loading system Valves: Ball valve Support: Mounted on approx. 600 mm legs Todpfx Asxa Acxoacsd

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A -Stroke: 25 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm Todexay Rajpfx Aacsd -Hole: Ø 16 mm -Max. pressure: 12 bar -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm -Weight: 2.4 kg/piece

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Todpfx Aasvam D Recjd Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Condition: good (used), Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, compact cylinder, short-stroke cylinder -Manufacturer: Joyner, pneumatic cylinder type DUJ-22-60/50 -Stroke: 50 mm -Piston diameter: 60 mm -Piston rod: Ø 16 mm Tjdpfsxayxdox Aacsd -Hole: Ø 16 mm -Dimensions: 245/80/H105 mm -Weight: 1.9 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm Tjdsxayvcopfx Aacod -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece