Used Polishing Table for sale (38,661)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Hedpfx Abswwrxao Uofr Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: good (used), Year of construction: 2008, Table Circular Saw METABO Model: THKS 315 C / 2.80 DNB Year of manufacture: 2008 3-phase 400 Volt 50 Hz Power: 2.8 kW Blade bore: 30 mm Saw blade diameter: 315 mm Mitre fence Mitre adjustment 45-90° Max. cutting height 90/45° Max. cutting width at parallel fence Carbide-tipped saw blade with alternate teeth Hsdpfx Absxvquus Uefr Saw blade guard Table extension

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Table no.: 76-400-1 / 2210 05 00 Hsdpfexy Styex Ab Ujfr Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: used, Ball transfer table 1600x490, 1600x785, 1000x1000 RA2030 Technical data: Hsdpjk Abvyjfx Ab Uofr Year of manufacture: unknown Condition: good (used) available dimensions: 1600 x 490 mm, 1600 x 785 mm, 1000 x 1000 mm (with cutout at the corner) distance balls: 100/110 mm Height OK plate: 53 mm height OK balls: 73 mm Scope of delivery: one ball transfer table Optional: feet Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, sliding table length: 3000 mm cutting width at the fence: 1300 mm cutting width at the cross cut: 3200 mm cutting depth: 145 mm scoring unit: Ja height adjustment sawblade: elektrisch tilting adjustment sawblade: elektrisch Hedpfx Ajx Edlxjb Ujfr adjustment fence: elektrisch adjustment crosscut fence: manuell read out tilting: Digitalanzeige read out sawblade height: Digitalanzeige read out crosscut: digital Anzeige Ablänglineal: Scala sawblade diameter: 450mm speeds: 4 motorpower: 5,5kW suction connection: 80 und 120mm machine length: 3600mm machine width: 2200mm weight: 1200 kg

Condition: used, Year of construction: 1998, 1 piece cross-cut saw KALTENBACH TL350 as per images and inspection Colour: green Year of manufacture: 1998 Condition: used Payment method: advance payment by bank transfer Storage location: production hall Shipping: Collection only – Shipping is not offered for this item! Hodpfx Aex A Aqueb Uefr

Condition: good (used), Zwick Type: BZ1.0 / TH1S Zwick table testing machines Zwick with a maximum force of 1.0 kN. The course of the traverse: 1150 mm. Testing speed: 0.1 ... 1800 mm / min Scope of delivery. (See pictures) Hfsdoddantepfx Ab Uer (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2015, condition: like new (used), AUTOMATIC CLEANING, POLISHING AND DRYING SYSTEM The system was only used for testing purposes and consists of: 1 piece heated oil removal centrifuge 2 pieces circular vibrators for cleaning/polishing 2 pieces swiveling, heated drying centrifuges Furthermore, it is possible to run 4 different media via the heated stainless steel tanks. The tanks, piping, and centrifuges are made entirely of stainless steel and are therefore especially suitable for acidic cleaning or pickling of components. Disassembly will cost approximately €20,000–30,000, but it can also be carried out by the buyer. Hsdpoxxbcuofx Ab Uofr

Condition: good (used), Year of construction: 2023, machine/vehicle number: 10452, Offer 25497 Technical Data: - Load capacity: 1200 kg - Faceplate diameter: 1200 mm - Faceplate motorized and steplessly tiltable: 0 – 135° - Motorized rotary movement steplessly adjustable: 0.05 – 0.5 rpm - Table height in horizontal position: 1160 mm - Electric foot switch - 3-jaw chuck Hfodpfx Ajx Ek Rqob Uer - Required space: approx. W 1200 x H 1200 x D 1600 mm - Weight: approx. 800 kg

Condition: used, Ball transfer table 1600x490, 1600x785, 1000x1000 RA2030 Technical data: Year of manufacture: unknown Condition: good (used) available dimensions: 1600 x 490 mm, 1600 x 785 mm, 1000 x 1000 mm (with cutout at the corner) distance balls: 100/110 mm Hodek Abvvspfx Ab Ujfr Height OK plate: 53 mm height OK balls: 73 mm Scope of delivery: one ball transfer table Optional: feet Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Stainless steel work table AT 3500 with beechwood worktop and rear gallery 2 x stainless steel sliding doors with storage shelf Drawer unit on the left, shortened Door with shelf, shortened Dimensions: 3500 x 800/700 x 900 mm (WxDxH) Used device, cleaned Top sanded & re-oiled Delivery service Many more work tables in stock! Hjdpfx Aberhd Udo Uefr

Condition: new, Catalogue number H0548 - New machine, in stock - CE certificate - Cutting length: 3200 mm - Cutting width: 1150 mm - Cutting height 90°/45°: 80/55 mm - Max. blade diameter: 305 mm - Blade adjustable up/down and at 45° angle - Scoring blade diameter: 120 x 20 mm - Main saw speed: 4500, 5500 rpm - Scoring saw speed: 8000 rpm - Motor: 5.5 kW / 400 V - Scoring motor: 1.1 kW - Carriage guided on steel rods Overall dimensions: - Length: 3220 mm - Width: 3150 mm - Height: 900 mm - Weight: 700 kg - Mechanical height adjustment - Mechanical tilt adjustment - Table extension - Table widening - Angle cutting fence - Includes main blade and scoring blade Hfodpfodpdcvox Ab Uor Net price: 20,320 PLN Net price: 4,990 EUR Net price calculated at exchange rate 4.1 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Gruse Type: ELD 1-16-1 Gruse lift table ELD 1-16-1 Lift heavy loads easily Scissor lift table: Lift table with double scissors Lift table ELD Type explanation: Hfodporgpc Tefx Ab Uer Type designation ELD Load capacity 500 kg Overall height 350 mm Effective stroke 1600 mm Final height 1950 mm Table top 1250 x 800 mm Lower frame 1250 x 750 mm Lifting time approx. 21 sec. Power 2.3 kW Weight approx. 600 kg Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: GG94US-13608, total width: 6,200 mm, total length: 10,500 mm, overall weight: 6,000 kg, input current: 34 A, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 8 bar, pressure: 8 bar, Table for laminated glass, max 8+8 and 4600mm including loading table 100BLM-J Hodpfoxq D Uwsx Ab Ujfr Total weight approx. 6000Kg.

Condition: ready for operation (used), Feeding table Kleemann Dim.: 6500 x 1300 mm Incl.: E-motor Hodpfx Asu S Tq Nsb Ujfr

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Hodporc D Nrsfx Ab Uofr Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2022, condition: excellent (used), functionality: fully functional, Bakery and confectionery work table. Stainless steel with granite worktop. Reinforced welded construction. Storage shelf on the left, open on the bottom right. Stainless steel design. Approx. dimensions: 3000 x 800 x 890 mm (W x D x H). Used device, cleaned. We have many more top-quality tables in stock! Hodpfxowv E Nie Ab Uofr

Condition: excellent (used), CATALOG NUMBER 7513 Technical specifications: - Max main saw blade diameter – without scoring unit: 400 mm - max cutting height: 120 mm - Max main saw blade diameter – with scoring unit: 300 mm - max cutting height: 70 mm - Blade bore diameter: 30 mm - Scoring spindle saw blade diameter: 100 mm - Scoring spindle end diameter: 20 mm - Main blade adjustable up/down - Blade guard - Spindle lock - Sliding table length: 2600 mm - Cutting width at fence: 900 mm - With side table - Main motor power: 5.5 kW – Scoring spindle motor power: 0.75 kW - 2 rotation speeds - Table dimensions: 1200 x 700 mm - Extraction port diameter: 100 mm - Dimensions (L/W/H): 2600 x 3300 x 1100 mm - Weight: 790 kg ADVANTAGES – German manufacture – Used saw, in very good condition Net price: 9500 PLN Hodsvfp Iiepfx Ab Usfr Net price: 2260 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: new, Parker Hodocbldzepfx Ab Usfr Cutting table Cross cutting, longitudinal cutting, stacking 280X230X100cm New still packed by the manufacturer! Scope of delivery. (See pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2010, condition: ready for operation (used), Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible. Hsdpfsx Ecvcsx Ab Usfr

Condition: good (used), Year of construction: 2001, The system can also grind miters. Hsdpfx Ajiqghzsb Ujfr Connection value: 20.5kW Total length: 12500mm

Condition: used, Work table packing table workbench adjustable height with wooden top and drawer container RA1800 Work table made of metal, painted white, used wooden worktop (traces of wear) height adjustment manually by crank Dimensions: width: 2000mm depth: 640mm height: 840 - 1020mm (adjustable) Drawer container with 4 drawers of different heights Container in 2 different colors (turquoise and blue) Arrangement of containers partly on the left, partly on the right Container dimensions: 400 x 650 x 600 mm (WxHxD) Heights drawers: 1x 50mm, 2x 150mm, 1x 300mm More than 50 tables available! Hedpjk Abdwefx Ab Uofr All prices net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 14-1-149431-RSPA, 2x Robotic Grinding and Polishing Cell KRUGMANN RSPA-80.1.3.LB with Yaskawa Robot (Year 2014) Fully automated robotic grinding and polishing system for processing metal handles and profile components. The system comes from a family-run manufacturing operation (series production of furniture fittings) and was used for automatic grinding, brushing, and polishing of handles. Year of manufacture: 2014, Made in Germany. System configuration: – Base machine / Robotic Grinding and Polishing System KRUGMANN RSPA-80.1.3.LB Serial no.: 14-1-149431-RSPA, Year: 2014 – 6-axis industrial robot YASKAWA Motoman (type YR-MS0080W-B00) with DX100 controller Hfedpfxsx Hqf Do Ab Ujr DX100 controller: 3-phase 400/415/440 V, 50/60 Hz, approx. 4.0 kVA, full load current approx. 11.5 A Controller battery last changed: 12/2023 – Long-brush machine LBS 2-350.2.2.1000, Serial no. 14-1-149431-LBS Connection: 3 x 400 V, power approx. 5 kW, compressed air 6–8 bar – Belt grinding station RSED 1-350.1200.4.3500, Serial no. 14-1-149431-RSED Connection: 3 x 400 V, power approx. 4 kW, compressed air 6–8 bar – Double-brush station RDBE 2-350.2.2.1300, Serial no. 14-1-149431-RDBE Connection: 3 x 400 V, power approx. 5 kW, compressed air 6–8 bar – Polishing station RPEO 1-500.7.5.1300, Serial no. 14-1-149431-RPEO Connection: 3 x 400 V, power approx. 7.5 kW, compressed air 6–8 bar Application area: – Automatic grinding, brushing, and polishing of metal handles and profile components – Ideal for manufacturers of furniture fittings, handles, profile parts, or similar series components – Multiple processes (linear finish, belt grinding, brushing, polishing) in a single line – Robotic programming enables reproducible quality and fast changeover to different parts Condition / Maintenance: – Well-maintained, used condition, the system was in operation until recently – Regular maintenance, controller battery replaced 12/2023 – Test run possible by arrangement – Comprehensive documentation (manuals, wiring diagrams, layout) available Technical data (extract): – Year of manufacture: 2014 – Supply: 3 x 400 V + N + PE, fuse approx. 63 A – Compressed air demand: approx. 6–8 bar – Total drive power of all stations: approx. 20 kW Note: A second, almost identical KRUGMANN robotic system is also available as an option (package price on request). Inspection by appointment possible. Dismantling and loading can be organized in coordination with the buyer.

Condition: used, Work table packing table workbench with stainless steel top, rear upstand and 2x lockable containers RA1802 Work table made of metal, painted white, used worktop with stainless steel surface (traces of wear) Dimensions: Width: 2200mm depth: 600mm height: 775mm Lockable container with door (1x left, 1x right) Container in 2 different colors (turquoise and purple) Container dimensions: 300 x 410 x 550 mm (WxHxD) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Hodpfx Abok Abd Es Uofr For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Ball transfer table 1600x490, 1600x785, 1000x1000 RA2030 Technical data: Year of manufacture: unknown Condition: good (used) available dimensions: 1600 x 490 mm, 1600 x 785 mm, 1000 x 1000 mm (with cutout at the corner) distance balls: 100/110 mm Height OK plate: 53 mm height OK balls: 73 mm Scope of delivery: one ball transfer table Hodpfx Aok Abvrsb Ujfr Optional: feet Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team of Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics