Used Post for sale (2,592)

Year of construction: 2006, condition: used, Sewing machine Meccanotecnica Aster Astronic 180 Year: 2006 Description: - Digital display - Feeder - 4 + 4 opening possibilities - Book block separator - Book stacker: Plus Stacker - Roller table delivery - Pump Max. mechanical speed: up to 180 cycles/min Maximum size range: 320 x 420 mm Minimum size range: 75 x 150 mm Fpjdoypma Ujpfx Aa Eed Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 Fodpfx Aasxxnlpe Eepd 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Fpjdpfjvtcviex Aa Esd Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Fpsdpfx Asv I Ddqja Esd Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty Fpodpfx Aoq N Ay Aoa Eed

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Fpedpfx Aaenr Nl Ss Eed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Fpjdpfx Aoqmm D Soa Ejd Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Fsdpfxjydnxns Aa Ejpd Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Fpsdpfx Aoydnw Dsa Eod Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: used, In this offer you purchase a used booklet finisher "Canon Booklet Finisher W1 Pro" Object of sale: 1 x Canon Booklet Finisher W1 Pro suitable for various Canon models Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Fpjdst Hfhkepfx Aa Eed The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, mileage: 95,000 km, power: 130 kW (176.75 HP), first registration: 10/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, fuel tank capacity: 75 l, color: black, gearing type: automatic, number of gears: 8, emission class: euro6, Year of construction: 2021, Equipment: ABS, Android Auto, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), full service history, hill-start assist, power assisted steering, power mirror, seat heater, start-stop system, trailer coupling, = Further Options and Accessories = - Adaptive Cruise Control - Height-adjustable driver’s seat - Comfort package (multifunction steering wheel) - Comfort package plus (steering wheel heating, multifunction steering wheel, leather steering wheel) - Comfort seats - Lumbar supports - Front center armrest - Multimedia package (Bluetooth phone preparation, multimedia preparation, connected services) - Heated front seats - Start/stop system - Alarm system Class I - Heated exterior mirrors - Front electric windows - Electrically adjustable exterior mirrors - Driver airbag - Remote central locking - Collision mitigation with braking function - Radio - Lane keeping assist - Immobilizer - Post-collision prevention system - Thermal glazing - Adjustable steering wheel = Additional Information = General Information Number of doors: 4 Model year: 2017 Cab: double Technical Information Torque: 410 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Dimensions Length/Height: L3H1 Weights Unladen weight: 2,477 kg Payload: 1,023 kg Gross vehicle weight: 3,500 kg Fpodpfx Aajyr Ry Ro Eod Interior Upholstery: Skai Maintenance, History and Condition Books: Available (dealer servicing) Number of key remotes: 2 Product Safety EU Representative: M.A.N. Truck & Bus B.V., Postbus 72, 3800 HD Amersfoort, NL

Year of construction: 2016, condition: excellent (used), functionality: fully functional, machine/vehicle number: 116245, GM DC330 Digital die cutting machine/ converter Compact footprint Unwind Web guide Web width 330 In / Outfeed nip for tension control Magnetic die station 200z / 25inch to support die plates of 50mm to 520mm Distortion/ Dispro factor to handle other tooth size plates Re Reg mark reader to support the printed web Die-cut offset possible inline Lateral/ Cross movement possible Waste rewinder Fedeylpvdepfx Aa Eopd Slitting station with manual 7 air pressured V-knives Upper and Lower rewind with options of clock or anti clockwise rotation Label or meter counting Core mandrels/spindles of 25mm, 38mm, 44mm and 76mm x 2 Cold foil Self adhesive lamination Laminator unwind and rewind Silencer to reduce noise when using the lamination Full Flexo station Varnish tray, Picking roller, Anilox roller, Print roller included GEW UV lamp Min 6 bar air pressure required Machine Weight 1200Kg

Condition: used, Year of construction: 2005, Conveyor tower Solema Drying station 25 Year: 2005 Description: - Length of conveyor: 25 mtr - Delivery to the right Fjdpfxjwx Ii Ro Aa Eopd

Condition: used, Duplo Ultra 300A UV Coater with SF-300 Feeder Removed from closed printshop. Was in full working order when disconnected. Would recommend machine benefit from a service. Sold Ex works. Any questions or need more photos please ask. Machine is in stock. Spec The Duplo Ultra 300A UV Coater is a high-speed, heavy-duty flood coating system designed for offline finishing of offset and digitally-printed materials. It standardly includes the high-capacity SF-300 Suction Feeder to handle production-level volumes. Fedpjymgumefx Aa Espd Core Technical Specifications The system is engineered to match the speed of modern digital presses while maintaining high-quality finishes. Maximum Speed: Up to 148 feet (45 metres) per minute. Maximum Paper Size: 20” x 28” (508 mm x 712 mm). Minimum Paper Size: 8.5” x 11” (215 mm x 280 mm). Paper Weight: 200 to 350 gsm. Coating Types: Applies High Gloss, Satin, or Matte finishes. SF-300 Suction Feeder Specifications The SF-300 Suction Feeder is the standard feeding unit for the offline "A" model. Feeder Capacity: 7.5-inch pile height or approximately 90 lbs of paper. Feeding Mechanism: Top-feeding air suction belt designed for difficult or heavy stocks. Detection: Built-in double sheet detector to prevent jams and coating errors. Weight: The feeder itself weighs approximately 305 lbs

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar Fsdpsytf Irjfx Aa Ejpd • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom

Condition: good (used), Year of construction: 2007, EDGEBANDING MACHINE WITH JOINTING AND COPY MILLING; RELEASE AGENT APPLICATION, MACHINE USED FOR PUR GLUING^ Technical Data: Workpiece thickness: 8 - 50 mm Edge thickness: * Fixed lengths: 0.4 - 8.0 mm * Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm or 3 x 45 mm) Feed rate: 11 m/min Electrics: 400 V, 50 Hz, 3 Ph. Equipment: Adjustable infeed fence Centrally adjustable overhead pressure Central manual chain track lubrication Control panel at machine infeed Fpodpfx Aeyrfh Noa Eod Release agent application Jointing unit: 2 x 2.2 kW 1 clockwise, 1 counterclockwise Max. material removal: 3 mm Gluing station with clockwise and counterclockwise operation 1 main pressure roller and 2 post-pressure rollers End trimming unit: 2 x 0.18 kW Pulling cut for high precision Pneumatic adjustment for straight and chamfer cutting via program Flush milling unit: 2 x 0.55 kW With vertical and horizontal tracing 2 working positions selectable via program: flush and radius milling, all axis adjustments with digital counters for quick setup Profile milling unit: 2 x 0.35 kW For profile milling of edge corners Max. edge thickness: 3 mm Max. workpiece thickness: 55 mm With pneumatic 2-point adjustment for chamfer/radius Scraper unit with quick-change heads Tracing above, below, and laterally With 2 additional quick-change heads Glue line scraper device, Pneumatically controlled Tracing above and below Cleaning agent application Buffing unit: 2 x 0.09 kW With cleaning agent application Control system: POWER CONTROL PC 20 +

Condition: ready for operation (used), functionality: fully functional, Very nice booklet maker for sale. Folding, stitching, and trimming. Brand: Horizon, model SPF-10-II with FC-11 trimmer. Fitted with Hohner stitching heads. 2,800 books per hour, 220 volts. Of course, you are welcome to test this machine at our facility. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Regards, Henk Hoos. Fpedeyb Ahxspfx Aa Esd

Condition: as good as new (ex-display), functionality: fully functional, Very nice numbering machine for sale. With the capability for perforating, scoring, and slitting. Brand Morgana, model FSN II, suction-fed rotary. High-power vacuum and air pump, can be used with 8 heads. Maximum size 460 mm x 4600 mm. Fully mobile, single-phase voltage. Fpsdpfxsyrrcae Aa Eed Including 2 x vertical numbering blocks and 2 x horizontal numbering blocks. Complete with manual. This machine is working 100%, looks like new and has seen little use. Of course, you are welcome to test the machine with us. We can arrange transport/packaging for you and load it into a truck or container. Request a price including transport (location: the Netherlands). Regards, Henk Hoos.

Condition: new, 21.25 m² storage platform incl. stairs, railings on two sides, top edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Fpsdpfxeyr Nw Io Aa Eod Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Supports, stairs, railing posts, cross bracing & dome struts powder-coated in RAL 7016 - Handrail, knee rail, roll-off edge, main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, OK natural & UK white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x Chipboard - 01 x Stairs, 37° incline - Approx. 8.25 running meters Railing - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 5026,00 € net 5980,94 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: like new (used), functionality: fully functional, Very nice creasing machine for sale. Brand Morgana. Model Autocreaser. Including perforating set. Max sheet size 630 x 330 mm, memory for 9 separate jobs. Fjdpsyrp Sljfx Aa Eopd Voltage 230V single phase. This machine is 100% operational and lightly used. You are welcome to test the machine at our premises. We can arrange transport/packaging for you and load it into a truck or container. Ask for a price including transport (location: the Netherlands). Regards, Henk Hoos.

Condition: excellent (used), Year of construction: 2006, Booklet production: Horizon VAC 100A, SPF 20A, FC20A, LC 200, PJ 77 Counter reading on the VAC 100A tower: 1.88 million The machine is in perfect working order and is in very good condition. Fjdpfxsrt T Ahe Aa Eepd Infeed formats: Max. 500 mm x 350 mm, Min. 180 mm x 120 mm Finished formats: Max. 250 mm x 350 mm, Min. 85 mm x 120 mm (cut) Type thickness: Max. 4 mm Staple spacing: 73 mm - 160 mm 2 Hohner 48/5 stitching heads Wire gauge: 24 - 28 Machine dimensions: Length 470 cm x Width 110 cm x Height 196 cm (without PJ 77) Weight: 990 kg Power supply: 2 x 230 V with Schuko plug

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, cutting width (max.): 780 mm, insertion depth: 780 mm, insertion height: 120 mm, overall weight: 1,400 kg, Equipment: documentation/manual, safety light barrier, Year of manufacture: 2007 Cutting width: 780 mm Total cuts: 375,080 Chromed air table Side tables, light barriers Fodpfeytbm Dox Aa Eopd 1x spare blade Documentation and tool for blade change

Condition: excellent (used), Year of construction: 2021, Ref: 11062 . 2021 Horizon SmartStacker Only 1.1m books on the counter! The latest, innovative way to process B2 (20” x 29”) digitally printed sheets to finished format size. Features: Near-line operation with Sheet Feeder – can be operated as a near-line system. Newly designed sheet feeder accommodates B2 (20” x 29”) sheets at up to 4,500 sheets per hour. Finishing Line Controller (FLC) controls all setup and operation of the SmartStacker by use of JDF workflow. Can serve multiple HP Indigo 10000 Digital Press units and other HP Indigo presses. Can be connected directly inline to an HP Indigo 10000 Digital Press. Print submission, print, and sheet processing performed without any manual operation for higher sheet integrity & efficient workflow. Can be connected with an Horizon signature folder, saddle-stitcher or perfect binder to achieve total finishing automation. Specification: Sheet Size (Before Cut) Max. 762 x 530 mm or 30.000" x 20.865" Fsdoycb Sropfx Aa Eepd Min. 279.4 x 330 mm or 11.000" x 12.995" Piece Size (After Cut) Max. 381 x 530 mm or 15.000" x 20.865" Min. 100 x 105 mm or 3.940" x 4.135" Sheet Weight Range: Normal Paper: 81.4 to 370 gsm Coated Paper (for Merge Stacker): 90 to 360 gsm Paper Thickness: 4 to 15 pt or 0.1 to 0.381 mm *1 pt=1/1,000" Sheet Stacking: Straight Stack or 10 mm or 0.39" Offset Stack Maximum Stack Height: 254 mm or 10.00" Number of Cuts: 1st Process Unit: 1 to 7 columns (14 cutters) 2nd Process Unit: 1 to 4 rows (8 cutters) Production Speed: Up to 4,600 sheets per hour * Production speed differs depending on number of cuts in 1st Process Unit and type/condition of sheets. * HP Press may need to slow down depending on the sheet condition in case of inline configuration.

Condition: new, Scoring unit , kW Dimensions (L/W/H) , mm machine weight ab. , kg Masterwood MasterSaw Solid pressure beam saw with full features ----- Manufacturer's description: The MasterSaw pressure beam saws feature the following features: - Air-jetted cutting line - Height-controlled pressure beam - Controlled sawblade projection - 3 or 4 air-cushion tables, adjustable middle tables - Loading and unloading rollers at the end of the tables - 15 kW main saw motor (MS 430 L: 18.5 kW) - Scoring unit adjustable horizontally and vertically from the control panel - Masterlock quick-change system for sawblade changes - Saw carriage travel: 110 m/min, forward travel: max. 95 m/min - Pusher travel: return travel: max. 95 m/min - Machine weight: 6 t or 6.8 t - 8 or 10 double-finger clamps as standard - Double-roller side aligner - Intuitive machine software with graphical user guidance - Stress-relieving cut - Post-cutting option (nesting) - Front and rear cleaning flaps ----- MasterSaw Series Features: MasterSaw 320 - Outstanding Value for Money - Cutting Length 3,200 mm - 3 Air Cushion Tables, Adjustable Middle Table - 6 t Machine Weight MasterSaw 430 - Industry Standard for the Woodworker - Cutting Length 4,300 mm - 4 Air Cushion Tables, Adjustable Middle Table - 6.8 t Machine Weight MasterSaw 320/430 Features in Detail: - Saw Unit with Automatic Adjustment for Optimal Saw Blade Overhang - Scoring Saw Unit with 200 mm Saw Blade for Tear-Free Cuts at High Feed Speed - The saw unit is driven by a servo motor and a rack and pinion drive - The pneumatic pressure beam is always positioned parallel to the work table using a rack and pinion drive - The opening height of the pressure beam is monitored by the intelligent control system, ensuring The shortest cutting cycles are achieved. - Double-roller side aligner positions the panel strips in front of and behind the cutting line. - Material pusher with 8 (MS 320) or 10 (MS 430) double-finger clamps. Technical specifications MasterSaw 320/430: - Max. panel dimensions MS 320: 3,200 x 3,100 mm - Max. panel dimensions MS 430: 4,300 x 4,300 mm - Saw blade diameter: 400 mm - Cutting thicknesses up to 90 mm - Saw motor power: 15 kW - Scoring saw motor power: 1.5 kW - Feed speeds: up to 95 m/min in sawing mode - up to 110 m/min Fpsdpjxmk Ebofx Aa Esd in reverse mode - Smallest finished workpiece: 34 x 45 mm - Weight: 6 t (MS 320) or 6.8 t (MS 430) - Dimensions MS 320: 5,556 x 6,646 x 1,890 mm (L x W x H) - Dimensions MS 430: 6,556 x 7,775 x 1,890 mm (L x W x H) - CE safety guard ----- Features of the MasterSaw Series: MasterSaw 430 L - Lifting table machine with 120 mm cutting height The solution for high productivity The MasterSaw 430 L features a lifting table loading system from the rear. Thanks to its 120 mm cutting height, it is also ideal for series production. Features and technical data of the MasterSaw 430 L - 4 t panel stack with a maximum stack thickness of 500 mm (900 mm in a pit on request) - Saw blade diameter: 450 mm - Cutting thicknesses up to 120 mm - Saw motor power: 18.5 kW - CE safety guard ----- Useful options if required: - Professional optimization software Optimization software including import of lists of up to 10,000 parts, management of panels available in sto...

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 8271T, creasing machine Fsdpfx Ajykrvkoa Eopd