Used Pot Washer for sale (1,820)

Condition: used, The machine is ready for operation Lhedpfxoyrxr Is Adtsf

Condition: new, Year of construction: 2026, Ultrasonic washing system - ultrasonic cleaning device chamber made of stainless steel 1.4401 (AISI 316L) - incl. insulated hinged lid - incl. level control /dry run protection Ljdpfx Aelcctgjdtehf - incl. 1 piece stainless steel basket - floor ultrasound, frequency: 25 kHz, power (eff./peak): 500/1.000 Watt - Heating adjustable up to 80°C; power: 5,000 watts - Basket dimensions: LxWxH 520 x 230 x 200h mm - Basin dimensions: LxWxH 600 x 300 x 270h mm - Outer dimensions: LxWxH 680 x 420 x 490h mm - max. loading weight of the basket: 20 kg - device is mobile

Condition: as good as new (ex-display), Year of construction: 2026, Parts Cleaning Machine – Spray Cleaning Unit Type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel wash pump (by Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar (stainless steel pump) - Tank capacity: 105 litres - Heating: electronically adjustable (room temperature to 90°C) - System dimensions (LxWxH): 1,150 x 1,250 x 1,900 mm - Empty weight: approx. 220 kg Washing time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and external cladding) made from stainless steel 1.4301 (AISI 304) Water circuit and loading basket made from stainless steel 1.4301 Complete system insulation (tank and cabin) made from stainless steel 1.4301 Mechanical lid locking mechanism Bath cover with fine filter (2,000 micron) Suction filter for pump protection Operating hours counter Steam extraction system including condensate recirculation Oil skimmer for bath maintenance Lodjd H Slcjpfx Adtshf The parts washing unit is as new (trial or laboratory unit) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST!!!

Year of construction: 2016, condition: as good as new (ex-display), functionality: fully functional, Friction washer Lodpfxjbxadlj Adtshf Manufacturer: Neue Herbold Drive: 22 kW for cleaning of regrind, especially film flakes, PET- bottles flakes and other hard plastic materials.

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel Lhsdpfx Astu Ikcjdtjf • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: new, Year of construction: 2026, The fruit washer for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. Initially, the fruits are immersed in water for thorough pre-cleaning. Afterwards, they are transported further via the conveyor belt and carefully cleaned with fresh water. Technical Information • Capacity: 1000 kg/h Lhodpfsv Srp Aox Adtjf • Power requirement: 0.75 kW, 230 V, 6 A • Material: WNr. 1.4301, AISI 304 stainless steel • Water connection: 3/4” quick coupling • Electric control cabinet with IP65 protection rating • High-quality workmanship • Equipped with rollable wheels • Low maintenance requirements Dimensions: Length: 2915 mm Width: 840 mm Height: 2270 mm

Year of construction: 2026, condition: new, The fruit washer with a mill for fruits and vegetables is made entirely of stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water for a pre-wash. Afterwards, they are transported further via the conveyor belt, which thoroughly cleans the fruits with fresh water. After cleaning, the fruits enter the mill, where they are processed with the desired sieve to achieve the required mash consistency. • Easy to clean • Low maintenance requirements • Belt speed is steplessly adjustable in both directions • Equipped with 2 swivel wheels • Equipped with 2 fixed wheels Technical Information • Nominal capacity: 2000 kg/h • Power requirement: 3 kW, 400 V, 10 A • Mash discharge height: 1400 mm • Connection for washing tank: G 6/4” • Connection for cleaning: G ½” • Material: WNr. 1.4301, AISI 304 stainless steel • Water consumption: approx. 12 L/min Lhodpfx Adjv Srguotef Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg

Year of construction: 2010, condition: excellent (used), functionality: fully functional, ELECTROLUX 150 + 50 LIT ID.NO. 2898 Electrolux paired cooking pots 150 and 50 liters year model 2010 both in very good condition! Dimensions 220 x 105 cm H 100 cm. Lhjdpsv Abpgjfx Adtef

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Lhjdpfsxwy H Aox Adtsf Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, PERO used parts washing machine Lhedpfx Aoyb St Rjdtjf

Year of construction: 1992, condition: good (used), machine/vehicle number: 20281, Offer 23034 Technical data: - max. grinding length approx. 350 mm - max. grinding width 150 mm - max. installation height with / without magnet 150 / 210 mm - grinding wheel stroke approx. 200 mm - clamping surface 300 x 160 mm - magnetic clamping plate 250 x 150 mm - grinding wheel dimension approx. 200 x 80 x 78 mm Lhodpsklxwksfx Adtef - grinding wheel speed 2800 rpm - swivel range of the grinding arm approx. 180 ° - manual swivel arm clamping via clamping lever - wet grinding device - drive 400 V / 1,85 kW - space requirement approx. W 850 x H 1650 x D 800 mm - weight approx. 350 kg

Condition: good (used), Year of construction: 2001, Krones bottle washer, year of manufacture 2001 676-039 6000 bottles/hour, 0.2l-1.0l bottles Ljdex N I R Nepfx Adtshf Machine will be available in December 2026 6000 bottles/hour

Year of construction: 2026, condition: new, The fruit washer elevator mill is made from stainless steel. Firstly, the operator of the machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 3000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. Ledpfx Adeflpmkotohf - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Powerful 4 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel and easy to clean after using.

Year of construction: 2026, condition: new, The fruit washer mill is made from stainless steel. Firstly, the operator of machine pours fruits and vegetables into the washing tub with clean water. Conveyor lifts the products up to the mill. During the lifting process, water nozzles spray the fruits and vegetables with clean water. The mill crushes the products after they reach the top of the conveyor. Finally, the fruit and vegetable mash comes out of mill. Capacity – 1000 kg/h. - The crushing head of the machine is round, so all the crushed mash goes directly out for further processing. This feature significantly helps when washing the head as there are no corners. - Our round shape technology is superior to other producers’, because a lot of fruit mash gets stuck in the corners of square-shaped heads for hours and can cause juice fermentation! - Machine has additional table in front of the basin for putting fruits or boxes on it. It facilitates the process of pouring the products into the basin. - V form washing basin helps fruits and vegetables move directly to the conveyor, therefore less fruit stay in the basin. Integrated water-spraying system provides additional washing when lifting the fruits up the conveyor. - Belt conveyor has a water drainage and speed regulation system. - The speed of the belt conveyor is adjustable in the control panel. - Optional replaceable cutting graters/sieves are available for different fruits and berries. - The mill does not damage the fruit seed. - Machine is easy to clean after using. - Powerful 2.2 kW crushing engine can crush various fruits, berries and vegetables – from soft raspberries to hard apples, beets, etc. - Machine is entirely made of stainless steel. Lodpfxjflpfbe Adtehf

Year of construction: 2026, condition: new, Fruit and vegetable washer AQUA 3000 is designed for washing and cleaning fruits and vegetables before processing. Fresh water and soft brushes leave product intact, wash gently and cleanly. Capacity – 3000 kg/h. - Entirely made of stainless steel. - Mounted on pivoting wheels. Lhjdsflpg Nspfx Adtjf - Easy cleaning of the whole washer after use. - Washer cover can be opened for inspection and cleaning. - Operation at the central command box. - The speed of the washer is adjustable – the speed of the washer dictates the capacity of the processing line. - Gradual exchange of water during the washing: the inflow of fresh water comes in at the exit of the washer, the outflow of the wastewater goes out through the small tube at the entrance of washer. - Long slide at the outlet for draining fruits and removal of dirt (e.g. leaves, branches, etc.).

Condition: used, Good day, We are offering used clamping beams from Erowa, System 3R and Becker Erodiertechnik. These clamping beams are suitable for wire erosion. Lsdetk N E Aspfx Adtshf The following parts are available: ER-017646 ER-017647 ER-017648 ER-021128 ER-021127 System 3R 3R-239-545-9911-V01 Becker erosion technology SB430-SB680 The clamping devices have signs of wear and are in very good technical condition. Individual acceptance also possible. Spare parts and accessories are available. Do you have any questions? Then we are at your disposal.

Condition: used, Year of construction: 1997, Used machine Year of construction: 1997 Condition: workshop checked Fitting drilling head Drilling unit 3/4 spindles Clamping cylinder 2 pieces Motor power 0.8 kW Connection 400/50 Volt / Hz Machine dimensions Length 950 mm width 650 mm Height 700 mm Weight 80 kg Availability: short term Lhedpfx Aow I Ugtjdtsf Location: Röllbach

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 27 reviews ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ Free shipping: 10-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ PLUS VAT & SHIPPING* ►►Buy now◄◄ ✨Sandblasting kit with tank✨ ⭕ Outdoor sandblasting, indoor sandblasting, used in mobile sandblasting machines with compressed air. ⭕ Pressure Sandblasting Pot Pressure Sandblasting Pot - Technical Specifications ✔ Working pressure: 7 bar ✔ Abrasive type: steel grit, steel ball, garnet, glass ball (glass sand), etc. ✔ Air consumption: liters/min is shown in the table below. ❓What is a pressure sandblasting pot❓ ✨ A pressurized sandblasting machine is a type of sandblasting equipment that can be used as a mobile unit anywhere outdoors to sandblast non-transportable surfaces (buildings, large steel structures, etc.). It can also be used in sandblasting rooms to sandblast large parts. Since it operates with air pressure, it also requires a compressor. ✨ At Proton, we have standard sandblasting pots of 50 l, 100 l, and 200 l. We can also supply various sizes of blast pots depending on your needs. ✨ All spare parts and equipment are available in our company. We offer sandblasting masks, sandblasting gloves, sandblasting hoses, and boron carbide sandblasting nozzles, which are necessary to ensure that the sandblaster is not affected by the environment. ⚡️Areas of Use of the Sandblasting Pot⚡️ To achieve the required surface roughening before painting and coating, this system is used in areas where cleaning and decorative shaping are desired. The main applications are; the shipbuilding industry, foundry industry, automotive, marble, textile, glass, pipe, manufacturing, and assembly industries. ✳️Standard blast pot sets are supplied with the following equipment.✳️ SANDBLAST POWDER 200 L ►1 Sandblasting Control Valve ►1 Remote Control Valve ►1 Quick-Release Silencer ►1 Water Separator Regulator ►1 Remote Control Handle ►1 Sandblasting Flow Diverter "Y" Connector ►1 Set of Barbed Fittings ►20 Meter Sandblasting Hose ►40 Meter Pneumatic Twin Hose ►1 8 mm Venturi Nozzle ►1 39 mm Nozzle Holder (MHE-1) ►1 Sandblasting Mask ►1 Overall ►1 Pair of Gloves ►1 Sandblasting Bag ►1 2-outlet air stand ►20 m breathing air hose and connection sockets ❗❗❗ Compressor features required for sandblasting tanks Motor power: 37 kW - 50 HP, air flow: 6.25 m3/min, 7-8 bar pressure; a compressor with the required specifications is required. A screw compressor is recommended. ❗❗❗ Lsdpsfvqixefx Adtohf

Condition: used, Year of construction: 2000, operating hours: 15,800 h, Used Bottle Washer KLINGER up to 9600 bph This Bottle Washer handles up to 9,600 bottles per hour. The machine features 20 bottles per row, ensuring a long soaking time and double lye pumps. Constructed entirely of stainless steel, this bottle washer uses a Siemens S7 control system, ensuring reliable and precise operation. Technical Specifications of the Washing System The Used Bottle Washer KLINGER up to 9600 bph includes double heaters and overflow pumps, providing a high cleaning capacity. Consequently, this configuration treats each bottle uniformly, enhancing the efficiency of the washing process. The Siemens S7 control system, furthermore, offers a user-friendly interface via a touch panel, simplifying operational management. Potable Water Treatment Plant Potable water treatment plays a crucial role in the proper functioning of the bottle washer. Hager + Elsässer provides the plant, which includes cation and anion exchangers, a salt container, a pre-filter, and a UV probe. This system processes 5 m³/h, ensuring high-quality water. Additionally, the reverse osmosis (RO) plant delivers a total desalination capacity of 2.5 m³/h, ensuring pure water for the washing process. Electrical Configuration and Control Panels This Bottle Washer features three electrical panels, arranged from left to right, with a Siemens touch panel for centralized control. This configuration allows for accurate monitoring and optimal operational management. In addition, the upper panels handle cooling, with a total residence time of 4.13 minutes and a treatment time of 1.63 minutes. Lhedpfx Aexqmrfsdtef Technical details Bottle cells: width and diameter: height 100 mm. 360 mm spray hole in the base of the cell diameter 20 mm. The bottle cell is not round on the lower insertion side, but flattened , so that even bottles with small diameters can be inserted into the cell without any problems. Bottles from 200 ml to 1,500 ml can be rinsed. The diameter of the bottle mouth must not be smaller than the spray hole in the bottom of the cell, i.e. at least 20 mm. If the bottles are very light, or made of PVC, the spray pressure of the pumps could be reduced using software, so that the bottles are not sprayed out of the cell. Fort PVC bottles the diameter of the bottles should not be smaller than 50 mm, depending on the shape and weight. The higher the weight, the better… PVC bottles do not cause problems because of their shape or diameter, but are usually too light… So your bottles can be easily worked. Treatment and Spraying Details of the Used Bottle Washer KLINGER up to 9600 bph The central panel, on the other hand, manages the spraying times with the following specifications: Spraying soda: 0.5 min. Residual soda: 0.83 min. Hot water: 0.38 min. Warm water: 0.38 min. Cold water: 0.38 min. Fresh water: 0.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 20161220, For sale: FS1000 friction washer in very good working condition, ideal for plastic recycling lines. Designed for intensive cleaning of flakes and films using mechanical friction and a water injection system. * High-speed rotor system (approx. 1000-1200 rpm) * Corrosion-resistant steel construction * Continuous in-line washing operation Lsdpfx Asymy Dnjdtshf * 3 mm screen ensures efficient separation of impurities * Can be integrated with flotation tank and drying system * The machine is fully refurbished and in perfect working order

Condition: new, Year of construction: 2026, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Dimensions: 770 x 600 x 1330 mm Air adjustment Pneumatic gun Lsdpfx Asuc Tn Ajdtshf Illuminated cabin Ventilation We kindly inform you that the washer is for self-assembly.

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Technical data: Tank capacity 140L Ljdpforh Ey Rsx Adtjhf Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. Lhedsvugwmjpfx Adtef The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Dimensions: 770x610x700mm

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service, garage or workshop. It is an irreplaceable device for quick and inexpensive removal of dirt. A very big advantage is the possibility of using the washer in a closed room. The parts washer is a guarantee of effective removal of all contaminants, from oils to hard-to-reach deposits, while ensuring safety and long-term performance of the components. The technology used guarantees not only cleanliness, but also protection against corrosion. It should be noted that the cleaning effects will depend on the detergents used. The parts washer is made to use up to 60 liters of cleaning agent, with a maximum tank capacity of 80 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 10 to 12 liters per minute, which allows for thorough cleaning of surfaces, even those with small cracks, using a strong stream. The liquid is drawn by the pump from the bottom in a closed circuit and fed further under pressure through a flexible hose. The workshop washer has 4 legs, thanks to which we have stable operation and an optimized working height. The cover locks automatically after opening. The device is also equipped with a worktop below the level of the bathtub, which can be used to place washing accessories or washed parts so that they can be left there to dry. The device requires self-assembly. Technical data: Bathtub capacity 80L Lhjdpfx Ajvugvvedtjf Maximum pump capacity 10-12 l/min Power supply 230V Dimensions 775x540x915mm Overall dimensions inside 710x480x260mm Shelf under the bathtub 700x420mm Power supply 230V Weight 23kg

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport. Lhsdewplgbspfx Adtef