Used Powder Coating System for sale (2,789)

Condition: new, functionality: fully functional, Year of construction: 2025, Powder Coating Booth + Manual Powder Coating Spray Gun Height: 250cm The number of filters is increased according to the project Advantages of the Paint Booth The use of paint booths offers many advantages to businesses High Paint Quality: Working in an environment protected from dust, dirt and other external factors results in a smoother and more aesthetic surface. Energy Efficiency: Modern paint booths have energy-saving features. This reduces costs and provides an environmentally friendly solution. Work Safety: Employee health is protected by expelling harmful gases and particles that may occur during paint applications. Compliance: Paint booths make it easy to meet industry quality standards. Iodpfev Nvkfjx Addeht

Year of construction: 2023, condition: new, functionality: fully functional, 2x ICM19 Standard system designed for operation at ambient temperatures of 5 °C - 30 °C GA-drawing according to NEA standard arrangement P&ID No. EX-Protection PSR 11 + ATEX protective systems Power Supply 380 V ± 5% - 50 Hz Control cabinet designed for operation at environmental conditions of 5 °C - 30 °C. (altitude of installation side < 500m a.s.l.) Capacity Range 137 - 410 kg/h = 120 - 360 g/m³ at 19 m³/min system intake (cyclone collector operation) defined as feed rates to mill - not discharge Nominal Capacity 319 kg/h for fineness 99% < 105 microns at 19 m³/min system intake airflow (cyclone collector operation) Details Ihedpfxow Snm Uo Addst for air intake mill < 11°C, flakes temp. < 25°C. flakes size < 25 mm, bulk density 0,6 - 0,7 kg/dm³

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder • Water Cooled 130kW AC Motor and Drive. Iedpfx Aow Snlwjddoht – Low Noise

Condition: new, functionality: fully functional, Cooling capacity Ijdpfsw Snbfsx Addoht • Throughput 800 kg/h • Product inlet temperature 140°C • Product end temperature

Condition: new, functionality: fully functional, The BBACooler model CCC-95/60 is a compact drum cooler for cooling and solidifying of viscous products. Ihjdjw Sm Epopfx Addst Cooling capacity • Throughput 450 kg/h • Product inlet temperature 140°C • Product end temperature

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. Ijdpfxswz Ntij Addoht - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. Ihedpfoxa H Ewex Addst (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Year of construction: 2014, condition: excellent (used), Powder / Ingredient Depositors Qty 3 available Stainless steel Year 2014 Iodpfx Adjurf Tkodeht In excellent condition

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer Iedpfx Asvy Txzjddoht

Condition: like new (used), Year of construction: 2019, functionality: fully functional, pressure: 15 bar, power: 100,000 kW (135,962.00 HP), operating pressure: 15 bar, temperature: 201 °C, operating temperature: 201 °C, Price by negotiation Iodowkq Nqopfx Addoht

Condition: new, Year of construction: 2025, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. Isdpfx Ajq Nf Uwjddsht 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS Ijdpfx Aswzmcbeddoht In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, functionality: fully functional, power: 55 kW (74.78 HP), Year of construction: 2025, A coal ball mill, also known as a coal grinding mill, is a type of grinder used to grind and blend materials for use in mineral dressing processes, paints, pyrotechnics, ceramics, and selective laser sintering. It is a cylindrical device used to grind or mix coal, ores, chemicals, and other materials mechanically. Here are key features and aspects of a coal ball mill: 1. Cylindrical Structure: - The coal ball mill typically consists of a horizontal cylindrical shell. The inner surface of the shell is usually lined with abrasion-resistant material such as steel or rubber to protect it from wear. Isdpfx Ajq Nf U Eoddjht 2. Grinding Media: - Grinding media, such as steel balls or ceramic balls, are placed inside the coal ball mill to assist in the grinding process. The rotation of the mill causes the grinding media to cascade and grind the coal particles. 3. Coal Feed and Discharge: - Coal is typically fed into the mill through a central feed pipe, and the ground coal particles are discharged through a discharge end. The size of the coal particles is reduced during the grinding process. 4. Rotational Motion: - The coal ball mill rotates on its horizontal axis. The rotation of the mill is controlled by a motor, and the speed can be adjusted to control the grinding process and particle size. 5. Air Sweeping: - Some coal ball mills incorporate an air-swept design. Air is introduced into the mill to facilitate drying and transport of the pulverized coal out of the mill. This design helps in controlling the moisture content of the coal and aids in the grinding process. 6. Drying and Grinding: - In addition to grinding, the coal ball mill may also have a drying function. This is particularly important if the coal being processed contains moisture. The drying and grinding functions are often achieved simultaneously in some coal mills. 7. Control System: - Modern coal ball mills are equipped with control systems to monitor and regulate key parameters such as mill speed, feed rate, and temperature. This allows for optimization of the grinding process and efficient coal processing. 8. Application: - Coal ball mills are commonly used in coal-fired power plants and other industries where coal is used as a fuel. They are part of the coal pulverization system, which grinds coal into fine powder for combustion in boilers. 9. Safety Features: - Safety features, such as monitoring devices and emergency shutdown systems, are often incorporated into coal ball mills to ensure safe operation. 10. Wear Protection: - Wear-resistant materials are used in critical areas of the coal ball mill to withstand the abrasive nature of coal and extend the life of the mill components. Coal ball mills play a crucial role in coal pulverization processes in power plants, contributing to the efficient combustion of coal for electricity generation. The specific design and features of coal ball mills can vary among different manufacturers and applications.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: Ihodpfxewzl Hxo Addet * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: new, Year of construction: 2025, functionality: fully functional, Ball Mill with Air Classifier: The Ultimate Powder Processing Equipment In the world of industrial powder production, precision, efficiency, and flexibility are paramount. Whether producing ultra-fine powders for high-tech applications or coarser materials for everyday products, the combination of a Ball Mill with Air Classifier offers unparalleled performance. This dynamic duo provides a comprehensive solution for industries ranging from chemicals and ceramics to paints, plastics, and pharmaceuticals. This article introduces the ball mill with an air classifier, explores its applications, and highlights the key advantages of this essential powder equipment. General Introduction to Ball Mill with Air Classifier ball mill with air classifier is an advanced grinding and classification system designed for efficient, high-quality powder production. The system consists of two main components: 1. Ball Mill: A cylindrical grinding device filled with grinding media (such as steel balls) that operates by rotating around its axis. The raw material is reduced to smaller particle sizes through impact and friction within the mill. 2. Air Classifier: A sophisticated device that separates particles based on size using airflow. Fine particles are carried away, while coarser particles are returned to the ball mill for further grinding. The combination of these two components creates a closed-loop system that ensures consistent particle size distribution, high efficiency, and minimal waste. Applications of Ball Mill with Air Classifier The ball mill with air classifier is a versatile solution used in a wide range of industries to process various materials. Key applications include: 1. Mineral Processing The system is widely used in the production of minerals such as calcium carbonate, quartz, feldspar, and talc. These finely ground minerals are essential for industries like ceramics, paints, plastics, and rubber. 2. Cement and Construction Materials Cement and other construction materials require precise particle size control for optimal performance. The ball mill with air classifier ensures uniformity and enhances the quality of construction materials. 3. Chemicals and Pharmaceuticals Fine powders play a critical role in the chemical and pharmaceutical industries. From active pharmaceutical ingredients (APIs) to industrial chemicals, this system delivers the consistent quality required for these applications. 4. Paints, Coatings, and Pigments Ihjdpfx Adevlwkxjdot The production of paints and coatings demands ultra-fine powders to achieve smooth finishes and vibrant colors. The ball mill with air classifier produces high-quality powders for superior results. #### 5. Food and Agriculture Food-grade powders such as additives, preservatives, and agricultural products like fertilizers can be efficiently processed using this system, meeting stringent regulatory requirements. Industries That Benefit from Ball Mill with Air Classifier Several industries rely on the capabilities of this system to produce fine powders with specific characteristics: - Ceramics: Produces high-purity powders for tiles, insulators, and advanced ceramics. - Rubber and Plastics: Creates fillers and additives for improved durability and performance. - Pharmaceuticals: Ensures consistent particle size for APIs and excipients. -Construction: Delivers materials for concrete, plaster, and other applications.

Condition: new, Powder Coating Systems For years, powder coating has been continuously evolving as an alternative to wet painting, and it has recently gained increasing importance due to its lower environmental impact—specifically the absence of solvents and paint sludge. Powder recovery further boosts the efficiency of these systems to a particularly high level. For users, powder coating offers the advantage of creating an extremely durable and corrosion-resistant surface that is significantly more impact-resistant than what traditional painting can achieve. Additionally, post-processing tasks such as grinding or drilling the powder-coated parts present no problems, as the coating will not chip off. Pony Luxury Coating powder coating systems provide you with tangible advantages: they are efficient, environmentally friendly, and—as always—unsurpassed in flexibility. We achieve this through a range of system types. Ihsdpfx Adexa Hzxedst Manual Powder Coating Systems Manual coating systems are the ideal solution for complex and demanding workpieces. Thanks to skilled operators, these systems offer continuous adaptation to changing conditions and varying product sizes. Flexibility is paramount—with the added benefit of an attractive entry price into the world of powder coating. Large-Scale Powder Spray Booths No matter how large or challenging your workpieces, our systems are larger! In the commercial vehicle and utility sector, where components are exposed to significant stress, powder coating has established itself as the ideal solution. To accommodate ever-larger components, we offer our large-scale powder booth, which supports unlimited manual coating, and, when combined with a conveyor system, handles any workpiece size with ease. Automatic Powder Coating Systems If your operation requires high throughput and rapid processing, an automated powder system is the way forward. Coupled with a conveyor, light barriers allow precise detection and, consequently, exact powder dosage to ensure maximum efficiency. The system can also be equipped with lifting stations and robots to handle even the most complex components. Powder Curing Ovens & Flash-Off Dryers These provide the perfect finishing touch to powder coating: the curing oven. Our ovens feature the highest insulation class, ensuring consistent, high efficiency. Detailed temperature control also enables use as a flash-off dryer to dry substrates after pre-treatment. Temperatures up to 250 degrees Celsius are possible, which allows usage as a tempering oven, for instance with hot-dip galvanized materials. Of course, typical use as a powder curing oven is straightforward. Optimal air distribution and a visualized control panel prevent over-baking, and even allow multiple color shades to be cured in a single process. Do you have questions or suggestions? We are happy to assist you!

Condition: new, Equipment: cabin, Stationary small parts spray booth Dixi █████ Achieve perfect and uniform coating of small parts. The extraction system ensures optimal results even in the smallest spaces. Optionally equipped with a turntable or a wheel holder, as well as a compact yet powerful extraction unit, it is perfectly suited for processing small workpieces and wheels. The side panels effectively limit the distribution of overspray, allowing work to be carried out in confined spaces without contaminating surrounding areas. Integrated lighting is also available as an option. Additionally, thanks to its low weight and minimal connections, the booth can be relocated to a new site in no time, ensuring your flexibility at all times. The system comes fully pre-assembled and ready for immediate use. Your Benefits Thanks to its compact design, flexible dimensions, and versatile accessories, this booth offers a broad range of applications. The sophisticated modular system requires minimal space and is therefore suitable for use in virtually any premises. Different filter media and stages enable highly efficient operation, while filter changes can be performed in just a few minutes. Application and Safety Ijdpfxexa Hx Re Addoht Processing of both water-based and solvent-based coating materials is enabled by the use of ATEX-certified explosion-proof motors. It can also optionally be used for spraying adhesives. The large filter surface ensures uniform extraction throughout the process.

Condition: new, Year of construction: 2025, total height: 982 mm, total length: 4,000 mm, total width: 1,100 mm, volume flow: 18,000 m³/h, warranty duration: 12 months, Extraction wall with 18,000 m3/h Ihodpfxowz Ic No Addst Max. power consumption 5 kW/h Electric motor 4 kW Air unit 18,000 m3/h Nicotra ADH 400 The full description can be found in the attachment to this listing.

Condition: used, all stainless steel dimensions: ± 5.000 x 2.200 x 2.700 mm drum diameter: 1.300 mm Ijdpjx T A Dxofx Addsht net drum length 4.200 mm adjustable inclination angle easy to clean inlet height: ± 1.700 mm (adjustable if necessary) discharge height: ± 1.000 mm power 3kW 400V, 50Hz 4 spray pipes Provided for extraction

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 986U042310279, Size B2, water-based coating unit for digital finishing, corona unit, high capacity feeder, high capacity stacker. Machine can be installed inline with an HP Indigo 12000 or 15000. Ihedpfx Adjx Apdnodet

Condition: excellent (used), mileage: 20,170 km, power: 169 kW (229.78 HP), first registration: 12/1999, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: red, gearing type: mechanical, emission class: euro2, suspension: steel, total length: 8,400 mm, total width: 2,300 mm, total height: 2,870 mm, Year of construction: 1999, DUTCH TRUCK IN EXCELLENT CONDITION, ONLY 20,000 KM MANUAL GEARBOX = Further Information = General Information Cab: double Axle Configuration Suspension: leaf springs Front axle: steered Rear axle: twin wheels Weights Unladen weight: 11,900 kg Payload: 6,850 kg Iodpjxvqgkefx Addeht Gross vehicle weight: 18,750 kg Condition Technical condition: very good Visual condition: very good Further Information Please contact Thierry Leemans for more information.

Year of construction: 2000, condition: used, Manufacturer : Dumoulin Model : TD 1500 Year: 2000 Ihjdjx R A Rgspfx Addot Type: coating machine Classification: ATEX motorisation and sensors Operating unit: from 4 to 15 kg of mass to be impregnated. Coater type: solid drum for impregnation Turbine diameter: Ø 600 mm Turbine depth: 400 mm Removable mixing blades Materials: 304 L stainless steel Unloading: automatic by reversing the rotation of the cylinder Driven by 0.37 kW geared motor, electronic variable speed drive from 2 to 25 rpm. T°C recorder Timer Rotor speed indicator Ventilation unit integrated into the frame : 1 x EU 13 air filter (absolute filter) 1 x 0.37 kW electric fan 1 x ADF electric heater (heating element) 1500 W with temperature regulator (sensor) 1 x stainless steel nozzle and blower in the drum      

Condition: used, can be used as crumber or pre-duster (only dry coatings) ideal for irregular shapes all stainless steel adjustable speed mobile Ihodsx Sdf Iepfx Addjt outfeed conveyor belt width 400 mm outside dimensions (l x w x h) : ± 3.000 x 1.600 x 1.900 mm

Year of construction: 1983, condition: used, Manufacturer: Manesty Model: Accela-cota 150 Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48″. Rotation speed: 2.5 – 15 rpm Cabinet with frequency converter Air treatment unit Ihsdpfx Adsx R Avpodet Air volume: 2890 m3/h Temperature : 0-80°C Steam pressure : 2 – 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Condition: used, A full coating unit, with its equipment, designed for coating products by means of a continuous or discontinuous spraying process. Additional documents : Plan implantation équipements + système cip . pdf 1 Glatt GC 750/500 coating unit – drive motor : 1,1 kW – 380 V – 50 hz – IP 54 – Ex - ventilateur d'entrée d'air : 1000 m3/h - 6860 trs/min - 2’003 Pa - Max 80°C - 1,1 kW - IP 54 – air inlet fan : 1000 m3/h – 6860 rpm – 2’003 Pa – Max 80°C – 1,1 kW – IP 54 Iedpfxsx R Amns Addeht – air outlet fan: 1200 m3/h – 2900 rpm – 1’030 Pa – Max 80°C – 7,5 kW – IP 55 – Drum speed: 2 – 18 rpm – Sold with two perforated drums ⌀500mm and ⌀750 mm – Adaptable 2-head spray arm + Peristaltic pump– Spare parts, seals, … - Capacity : 20L : 7 to 15 kg 60L : 30 to 45 kg 1 Dust collector Herding FilterTechnik Extraction air volume: 1200 m3 / h Extraction air volume: 1200 m3 / h 1 Wanson CD-36 steam boiler - Power: 36 kW – Steam output: 48 kg/h – Operating pressure: 5 bar – Temperature : 159°C – Water volume: 10 L 1 Cleaning system (CIP) Used for easy cleaning and maintenance of the machine.