4
Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.
Bst7tmp0ce
CoverMAK is a multifunctional coating machine that you can use for all your products. Its double-sided structure allows both liquid coating and simultaneous coating of products such as sesame, coconut, chia seeds. CoverMAK, which can be used with different processes such as paneling, allows you to perform your entire coating system quickly and reliably.
Bxmia3mnb9
You can use it with 220 volt household electricity and you can easily install it without the need for any additional installatio...
10
Automatic single head saw, blade Ø 500 mm + conveyor K-3000 (length 3m) right hand side as standard
APPLICATION:
For cutting aluminum, plastics and wooden profiles
FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to protective cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Possibility to cut at any intermediate angle between
- 67.5° to + 45°
- Speed regulation based on the type of profile to be cut
- Horizontal and vertical pneumatic clamps
STAND...
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Bnlwiwyfgv
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
12
As Turkey's leading concrete block machine manufacturer, we provide quality service to you with a brick making machine . concrete block machine we produce for many countries of the world have the best equipment and design. We are always a solution partner for those who are looking for concrete blocks machine for sale.
In addition, our company helps you with concrete block making machine equipment and parts and produces fast results for you with its wide product range.
The products we produce ...
SEMIAUTOMATIC BOOK COVER POSITION MACHINE
LJ308A
Bhhx2keocu
-new machine
7
DELTA III
Automatic slicing saw , blade Ø 450 mm, PLC control system
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Shield 450mm
* minimum slice thickness 5mm
* maximum slice thickness at one time 750mm
- Safe cuts thanks to the cover with safety sensor
- Automatic terminal system
Dewfamxdy
- Cutting speed control
- Digital adjustment of the blade extension according to the width of the cut profile
- Feeding of profiles with a system that prevents them from bei...
Length of the cut - 3000 mm
Zthyl0f7
Width of the cut - 1900 mm and 2950 mm
Fence 750 mm
Auto cut set for cutting backward and forward
One sided blade
Double sided blade
Cut thickness 1mm - 850mm
Speed control for rotation of blade
Variable speed control for cutting the length
Blade Size: 9745.20.0.5.18TPI
7
LEOplus
LEOplus automatic cutting centre 550 mm disc with automatic profile feed robot
APPLICATION:
Used for cutting aluminium, PVC and wood profiles
FUNCTIONS:
⦁ fully automatic operating system
⦁ hydropneumatic cutting
⦁ Automatic positioning. All steps between
-22.5° to +45° with an accuracy of +-0.1 degree
⦁ Industrial PC with Windows, 10" touch screen and easy, practical interface
⦁ Precision slicing function
⦁ Big memory
⦁ Adjustable disc stroke speed
⦁ Automatic cutting with previous
...
5
LEO R
Fully automatic, digital single-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Automatic operating system
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all stages between -22.5 °C and + 45 °C with servo motion system
- Batch processing and precision cutting
- Programming process and large memory
- remote access
- Data transfer via Ethernet and USB
- industrial PC wit...
4
Radial automatic single head saw LEO X with servo
As standard:
- 550mm target
- refrigeration system
- digital conveyor right 1pc
- automatic positioning of any angle between 30-90
degrees
- hydro-pneumatic cutting depth setting
- 3kW engine power
- cutting zone cover
- horizontal pneumatic clamps
- data transmission over the network, Ethernet, USB
Bhm0dpjn2c
- PC (IPC) HMI touch screen
Options for a surcharge:
- vertical pneumatic clamps
- chip extraction
- left-hand conveyor
- barcode printe...
2
Automatic single head saw METEOR I 600 (400V power supply)
disc Ø 600 mm, cooling system + conveyor K-3000 right in standard
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic cutting
- Safe cuts with automatic safety cover
Mvnuv0
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Can be cut in any intermediate angle between
- 67.5 ° to + 67.5 °
- Speed control
- Horizontal (2pcs) and vertical (2pcs) pneumatic clamps
STANDARD EQUIPMENT:
- S...
8
METEOR I 420
Automatic single-headed saw blade Ø 420 mm as standard with manual dimensional conveyor K-3000 (3m)
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
⦁ Hydropneumatic cutting
Endahuz
⦁ Safe cutting thanks to safety sensor cover
⦁ 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
⦁ Can be cut in any intermediate angle between - 45 ° to + 45 °
⦁ Speed adjustment depending on the profile to be cut
⦁ Horizontal (2pc) and vertical (2pc) pneumatic clamps
STANDAR...
4
VEGA - II
Automatic single head saw, blade Ø 400 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
FUNCTIONS:
- Hydropneumatic safe cutting process
- Horizontal and vertical pneumatic clamps
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles
- Can be cut in any intermediate angle between
-45 ° to + 45 °
- Impact-resistant cast iron core
Dbjafygvq
- Cutting speed adjustment based on the type of profile to be cut
STANDARD EQUIPMENT
- Service ring wrench
- Disc Ø 400 mm
- ...
6
GEMINI - II A
Semi-automatic, digital twin-head cutting-off machine, 2x blade Ø 400 mm, twin-cutting
APPLICATION:
For cutting aluminium, plastics and wooden profiles
MAIN FEATURES:
- Hydro-pneumatic cutting
- Safe cuts thanks to the fitting of a cover.
- Manual positioning at all stages between -45° and +45°
- 0°, 15°, 22.5°, 30°, 45° right and left fixed angles - quick manual adjustment
Iyjeni9p
- Automatic positioning of cutting length
- PLC control system
- Possibility of storing dimensions
...
3
GEMINI VI
Ixcmuntn
Automatic, digital twin-headed, 2x Ø 600 mm automatic angle saw blade
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
- Cutting capacity of profiles from 410mm to 5050mm (between heads), max. profile length in load...
4
GEMINI V SA - disc extension up to 185mm
Semi-automatic twin-headed saw blade, blade:2 x Ø 550 mm
APPLICATION:
For cutting aluminium, plastics, wood
Ixui09fj
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- High-speed positioning in steps 22.5°, 45° to 90°
- Manual positioning of any intermediate angle within the available span range
- Precision cutting
- Maximum internal angle 90 degrees, maximum external angle -22.5 degrees
APPLICABILITY TO SELECT TH...
6
GEMINI V R - disc extension up to 185mm
Fully automatic, digital twin-headed angle saw, blade Ø 550 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- slice function
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all degrees between -22.5 ° to + 45 ° with servo system
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- Touch control p...
3
POLAR - V (price without cutter)
Automatic milling machine with pneumatic blade change
Maximum dimension of the milled profile: 275x180mm
APPLICATION:
For final milling of aluminum and PVC profiles
2aqf3y9z
FEATURES:
- Hydro-pneumatic operation
- Vertical and horizontal pneumatic clamps
- Operation protected by a cover equipped with a safety sensor
- Automatic return to starting point
- Milling at various angles
- Simple blade replacement
- Infeed conveyor
The price is net price.
Warranty 12 mon...
7
APEX II
S38k2p
Automatic double-headed hydraulic compactor
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Hydraulic operating system
- Manual positioning, automatic operating system
- Adjustable clamping system for wide profiles
- Easy adjustment of clamping blade distances based on the profile
- Two-stage hydraulic pressure setting
- Assembly without size changes in the corner assembly processes
- Crimping profiles...
6
APEX IV
Automatic four-head hydraulic crimping machine for aluminium profiles used in the production of window and door joinery
APPLICATION:
Automatic crimping machine for crimping aluminium profiles
FUNCTIONS:
- High pressure resistant steel work table
- Automatic positioning with servo control
- Touch screen
- Adjustable clamping system for high profiles
- Profile-based adjustment of kneading blades
- Hydraulic operating system
- Two-stage hydraulic pressure setting
- Safe working area with sa...
3
ORBIT IV SA
PLC-controlled semi-automatic machine for cleaning corners and PVC surfaces
APPLICATION:
It is used to clean the surplus resulting from the welding of PVC profiles
FUNCTIONS:
Bhmz0hu9od
⦁ Cleaning the lower, upper and outer surface of the profile with two independent cleaning devices
⦁ Memory capacity for 250 profiles
⦁ Touchscreen control panel
⦁ Easy and quick entry of the program into the profile to be cleaned using Özçelik Makina's own software
⦁ Adjustable cleaning speed
⦁ PLC c...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and lewegp pr...
6
GEMINI IV SA
Semi-automatic, digital twin-head cutting-off saw, 2 x blade Ø 450 mm
APPLICATION:
For cutting aluminium, plastics and wood profiles
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Manual positioning on all steps between 45° and 90°
- Batch processing and precision cutting
- Programming process and large memory
- Automatic calculation of the cutting length
- PLC control system
- Cutting capacity of 4000mm and 6000mm profiles with built-in...
4
GEMINI X (disc extension up to 418mm)
Automatic radial bi-head cutting-off saw,
2x Ø 550 mm blade with large cutting range
APPLICATION:
For cutting aluminium, plastics
MAIN FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to the cover with safety sensor
- Automatic positioning on all steps between 30° and 90° with servo motion system
- Adjustable disc extension
- Touch control panel
- PLC control system
Bhmglcklqy
- Cutting capacity of profiles from 450mm to 6000mm (between heads), maximum ...
4
Automatic miter saw- Bewo 250mm
Jadbhgwz8
- Max saw diameter 85mm
- Length supply conveyor 6100mm
Komori Lithrone S 429 + Coating, year 2011
530 x 750 mm (20x29,5"), approx. 78 mio. impr.
Komori S-APC
Komori PQC-S
Komori PDC-Lite2
Komorimatic dampening
16K Speed version
Ink unit temperature control
Komori AMR
Komori KHS-AI
Streamfeeder
Extended delivery
Sep. coating unit with chamberbladesystem
Baldwin IR-Dryer
Autom. Ink roller washer
Autom. Blanket washer
Hso7osv
Autom. Impressioncylinder washer
Cardboard device
Powder sprayer
Etc.
Available: immediately
7
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and more feed ...
5
Strapping machine, packing machine, strapping machine
-Through hole: 500 x 500 mm
-Strapping tape: 5 mm
-Core diameter: 60 mm
Qkxyqgzjc
-Spool width: 120 mm
-A press of the pedal triggers the automatic strapping
We are pleased to offer:
Rilecart FAR 5/55 automatic punching machine with 3.1 calendar die and 2.1 punch Year 1993
Features:
Maximum Thickness per stroke: 2,5 mm. (standard 1,5mm.)
Maximum punching size: 550 x 550 mm
Minimum punching size: 160 mm (on punching side) x 120 mm
Speed: adjustable up to 120 strokes/minute
Punching distance from the edge: adjustable up to 40 mm max
Wide range of punching tools available.
Technical Specifications:
Power supply: 240V. single phase 50/60 Hz
Power drive: ...
Semiautomatic MEP Shark 320 SX
Cutting range round 260 mm
B88nojafi
Cutting range square 250 mm
Cutting range flat 320 x 200 mm
saw blade dimensions 3150 x 27 x 0,9 mm
Machine weight approx. 710 k
7
Control Heidenhain TNC 355
x-travel 1.000 mm
y-travel 400 mm
z-travel 450 mm
surface area 1.300 x 400 mm
feed range 1 - 6.000 mm/min
Be7yqptvpf
number of spindle speeds 60 - 3.600 U/min vertikal
number of spindle speeds 30 - 1.800 U/min horizonta
spindle taper SK50
vertical and horizontal milling possible
9
As European Bewo overhaul specialist we offer this completly refurbished and tested machine.
Installation consisting of ;
-Bundler loader;
max bundle diameter 650 mm, max lifting capacity 4000 kgs equally divided over 5 lifting units (max starting length 6500 mm)
-Saw unit;
Heavy duty, high speed roller drive tube transport system
Automatic setting of saw blade stroke,
5.5 KW cutting head motor 1 saw blade, spindle 40 mm
Micro lube blade coolant system c/w spray mist blade cooler
Z8ldc
Hydra...
4
saw blade diameter 400/425 mm
cutting diameter 130 mm
stroke 150 mm
capacity 45 degrees: round 130 mm
capacity 45 degrees: square 110 x 110 mm
capacity 90 degrees: square 120 x 120 mm
cutting speed 11/22 m/min
feed speeds 670 mm/min
Bvxoioeuyc
feed length 0-1200 mm
total power requirement 2,5 kW
weight of the machine ca. 1,8 t
dimensions of the machine ca. 1,8 x 3,8 x 2 m
5
Automatic drilling machine for door hinges
-Boring spindles: 8
-pneumatic workpiece clamping
-Power: 1.1 KW
-Speed: 2800 rpm
Qk9dbue7v
-Operating pressure: 6 bar
-Weight: 90 kg
10
bore capacity in steel (diameter) 45 mm
throat 330 mm
bore slide stroke 700 mm
table surface area 560 x 450 mm
bore spindle diameter /taper MK 4
Besq7z7sqt
bore spindle turning speed range 100 - 2240 U/min
bore feed range ja
total power requirement 3,3 / 4,1 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,2 x 0,75 x 2,45 m
14
Saw machine, Bandsawmachine
Model:  Miter, semi-automatic
Manufacturer:  Beka-Mak
Type:  BMSY 320 GL
Year: 2007
Miter: 75gr.+
Capacity:  320mm
610x320mm  without miter
Band: 4160x34
Sawing-speed: 20-100 m/min
B9stz208vr
Machine-dimensions: 1200x2100x1400mm
10
Control Heidenheim 124
x-travel 500 mm
y-travel 400 mm
z-travel 400 mm
tool adaptor SK40
max. 4.500 U/min
table load max. 200 kg
table size 700 x 500 mm
table rotating 360 Grad
table swivelling +/- 95+10 Grad
controlled axis 3
2 (3+2)
Number of working hours max. 8.000 h eigeschaltet h
output 9 kw
weight of the machine ca. 2,79 t
Gxoinw
1
incl. revertive leading device
used
manufactured by Okoma
type UF 2 S
built in 1978
mach.-No. 78 113
number of spindles 3 piece
cross-cut saw 2.2 kW
mortising spindle:
clamping height ca. 230 mm
single stroke f. 2 tools
mortising table:
feeder automatic - infinitely variable adjustable
clamping device pneumatic 2 piece
splinter wood changer double
rip fence Festo LAS
with transfer
1. profile milling unit:
motor 7.5 kW
spindle diameter 40 mm
clamping height 250 mm
flight circle diameter max. 200 ...
saw blade diameter 460 mm
cutting diameter 30- 150 mm
stroke 190 mm
Control Siemens touch
capacity 90 degrees: square 150 x 150 mm
sawblade width 2,25 mm
cutting speed 30 - 120 m/min
feed in one step 10- 850 mm
feed - independent 7000 mm
B3ovpkibbx
total power requirement 22 kW
weight of the machine ca. 5,5 t
dimensions of the machine ca. 3,2 x 2,4 x 7,6 m
This high capacity full automatic circular sawing machine will be spplied with
oil dust cooling arrangement. Machine can be ordered with...
Coating roller machine, roller application machine
-Transfer in current condition as seen
-Manufacturer: Giardina
Lp2kpdc
-Max. Width: 1260 mm
-Casting gap: adjustable
-with: 3x brush units
-Connection power: 11 kW
-Dimensions: 4600/2360/H1600 mm
-Weight: approx. 4000 kg
11
Semi-automatic machine Casemaker CMC Q Cover Two
The machine is in great condition, ready for production.
Manufacturer’s description:
The machine is very easy to set up, operate and service. It can produce up to 250 covers per hour.
The machine is equipped with the following elements:
gluing module
vacuum table
module for turn in edges,
pressing rollers,
module for positioning cardboard,
Types of veneers that can be used: smooth and laminated paper, photo paper, canvas, eco and leather, etc.
Te...
Sander De Stefani MVT 3000
Automatic edge sander for flat and shaped edges, solid wood edges, Mdf, veneered,melamine paper covered, lacquered, for furniture, doors, panels, etc.
1st sanding unit with exchangeable pad
B9ssnfksy2
Electronic speed variator
Engine horsepower 2
Mechanical oscillation of sanding belt 0-20 mm
Side suction inlet diameter mm 110
Head Suction Inlet Diameter mm 100
2nd sanding unit with exchangeable pad
Electronic speed variator
Engine horsepower 2
Mechanical oscillatio...
6
saw blade diameter 225 mm
cutting diameter max. 60 mm
feed max. 600 mm
total power requirement 5 kW
weight of the machine ca. 1,03 t
Dyag7u
4
We have 2 unused and new sewing machines. They are Typical GC9751 heads with automatic transport belts. 1 can be seen working in Rotterdam.
They are semi assembled for tr