Used Power Factor Correction for sale (40,872)

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Bsdpfxjz D Ihfs Adholp

Condition: used, Year of construction: 2013, functionality: fully functional, 2 units available, including silencer and gas control unit. Bsdpsz D S Ngsfx Adholp

Condition: used, Technical data: Bljdozrxuhopfx Adhop - Working pressure: 70 bar - Motor: 1.5 kW

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Indramat, AC servo power supply from CNC machining center Mikron VC500D -Type: KDV1-3-100-220/300-W1 -Quantity: 1x Power Supply available -Dimensions: 485/390/H105 mm Bjdjztppxjpfx Adhslp -Weight: 20.9 kg

Year of construction: 2011, condition: used, We offer this used Mecc Alte ECO 32-2L/4 emergency generator, manufactured in 2011. Type: ECO 32-2L/4 Nameplate ID: 0001525665 Bsdpfxez Eiqqe Adhelp Date of manufacture: 09/2011 Number of phases: 3 Continuous operation: S1 Rated speed: 1500/1800 rpm Insulation class: H Rated power (40 °C, 50 Hz): 60 kVA Rated voltage (40 °C, 50 Hz): 115/200/230/400 V Rated current (40 °C, 50 Hz): 301/173/151/86 A Rated power (40 °C, 60 Hz): 72 kVA Rated voltage (40 °C, 60 Hz): 138/240/277/480 V Rated current (40 °C, 60 Hz): 301/173/150/86.6 A Rated power (27 °C, 50 Hz): 62.5 kVA Rated voltage (27 °C, 50 Hz): 115/200/230/400 V Rated current (27 °C, 50 Hz): 314/180/157/90.2 A Rated power (27 °C, 50 Hz) – 2nd set: 75 kVA Rated voltage (27 °C, 50 Hz) – 2nd set: 138/240/277/480 V Rated current (27 °C, 50 Hz) – 2nd set: 314/180/156/90.2 A Protection class: IP21 Weight: 286 kg Moment of inertia: 0.54 kg·m² Bearing designation: 6309.2RS If you have any questions or need further information, please feel free to send us a message or call us.

Condition: used, mileage: 492,058 km, power: 368 kW (500.34 HP), first registration: 02/2018, fuel type: diesel, empty load weight: 12,850 kg, maximum load weight: 13,150 kg, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, gearing type: automatic, emission class: euro6, total width: 2,550 mm, operating hours: 12,167 h, number of cylinders: 6, displacement volume: 12,419 cm³, nominal power: 368 kW (500.34 HP), Equipment: ABS, Bluetooth, USB port, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), parking heater, power mirror, retarder, seat heater, tail-lift, Key Features Internal Reference: 26184M Chassis Number: WMA 18X ZZ1 JM7 574 93 Serial Number: 160.800.859 Bodpez Hpp Aefx Adhslp Vehicle Model: TGX 26.500 6x2*4 Auxiliary Drive / Swiss Vehicle Vehicle Make: MAN Product Category: Chassis Used / New / Demo: Used Mileage: 492058 Hours: 12167 Emission Standard: Euro 6 Date of First Registration: 27.02.2018 Last MOT/Technical Inspection: 17.01.2025 Fuel Type: Diesel Engine Displacement (cc): 12419 Engine Power: 500 Transmission Type: Fully Automatic Cylinders: 6 Trailing Axle: Steered Suspension: Steel-Air Retarder / Intarder: Yes Cab Vehicle Equipment: ABS, Bluetooth, CD Player, Differential Lock, Electric Windows, Electric Mirrors, ESP, Hands-free System, Tail Lift, Radio, Seat Heating, Auxiliary Heater, Cruise Control, USB Interface, Central Locking Number of Seats: 2 Air Conditioning: Air Conditioning Axles & Tires Axle Configuration: 6x2*4 Axle 1: 385 / 65 R 22.5/10mm, Disc Brakes, Leaf Suspension Axle 2: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Axle 3: 315 / 80 R 22.5/10mm, Disc Brakes, Air Suspension Number of Axles: 3 Weights & Dimensions Gross Vehicle Weight: 26000 Gross Train Weight: 40000 Payload: 13150 Unladen Weight: 12850 Vehicle Width: 2550

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003617 - Manufacturer Code: HVR02,2-W025N - Condition: As new (showroom item) - Functionality: Fully functional - Compatible Machine: - Weight: 22kg - Dimensions: 70x46x34 cm - If interested, we offer an overhaul service, please contact us. Bsdjyztu Repfx Adhelp

Condition: used, OKUMA POWER SUPPLY GLP 5000T E0451-521-037 Blsdoy S Dr Ujpfx Adhep . 2663

Condition: used, MIG MAG welding machine, gas-shielded welding unit CLOOS, type GLC 403 PA-TS Manufacturer's No. 8198, Year of manufacture 1994 Blsdpfxozugnzs Adhop Rated power 400 amps Power 400 amps - 60% duty cycle 310 amps - 100% duty cycle Adjustment range: stepless Connection hose package: 4.5 meters Mains connection: 380 volts, 50 Hz, 32 amp plug - 2-cycle and 4-cycle welding unit - External wire feeder, type CK 72/5TSZK with 2-roller drive and 4.5-meter hose package - 4-meter hose package with central connection and EHRIG hand torch, type Senator-800-D - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 300 kg Good condition

Condition: good (used), Control amplifier, servo motor control, power controller, thyristor power controller, thyristor regulator, power regulator -Manufacturer: KBR, power controller, power regulator, reactive power controller -Type: BK 2006 Bsdjzkr Dmepfx Adhelp -Voltage: 230 V, 50 Hz -Dimensions: 150/145/H85 mm -Weight: 1.2 kg

Condition: new, Year of construction: 2023, functionality: fully functional, power: 12 kW (16.32 HP), Manufacturer: CGM Sound pressure level at 7m dB(A): 72 Maximum power, 3-phase: 15.0 kVA / 12.0 kW Maximum power, 1-phase: 13.8 kVA / 11.0 kW Voltage: 400 Volts, switchable to 230 Volts Frequency: 50 Hz Gasoline engine: CGM OHV 720 Emission stage: STAGE V Cooling system: Air-cooled Cylinders: 2 Displacement: 713 cm³ Speed: 3000 rpm Electric start Battery: 12 V (Not covered by warranty) Fuel consumption at 3/4 load L/hour: 4.9 Generator: AVR regulation With brushes Ability to handle unbalanced loads: max. 25% phase-specific overload Blsdpfx Asz Stcrjdhop Circuit breaker Emergency stop switch Operating hour counter Frequency/voltmeter Wheel set with folding handle Sockets: 1 x 32 A - 400 V/5-pin 2 x 32 A - 230 V/3-pin 12V DC socket Dimensions and weight: Length: 870 mm Width: 588 mm Height: 726 mm Weight, dry: 184 kg Tank capacity: 40 l

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 380 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 300 mm, total height: 1,750 mm, total length: 2,420 mm, total width: 2,200 mm, overall weight: 2,400 kg, table height: 750 mm, Equipment: CE marking, documentation/manual, For sale: MEBER SM300 automatic band saw. Minimum cut length in semi-automatic mode: 20 mm. Minimum cut length in automatic mode: 90 mm. The machine comes with all original documentation (manuals, certificate of conformity, CE marking), as well as a sworn expert report prepared by a certified expert. Collection and transportation are the responsibility of the buyer, but I am willing to assist with loading the machine. Bledpfxez Ikvas Adhsp

Condition: good (used), Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC Bodpfx Adewrx Nzshjlp -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 160 mm -Thread: M16 -Bolt circle: Ø 133 x 13 mm Bodpsv Tvzljfx Adhjlp -Dimensions: Ø 160 x 210 mm -Weight: 10.7 kg

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 200 mm -Type: LK 200 A72-2163-132 -Thread: M20 Blsdpjv Uwqkofx Adhjp -Bolt circle: Ø 140 x 17 mm -Jaw width: 23 mm -Passage: Ø 32 mm -Dimensions: Ø 200 x 170 mm -Weight: 18.8 kg

Condition: good (used), 3-jaw power chuck Stock number: Bledpswy Hl Tofx Adhep Manufacturer: unknown Diameter: 250 mm Mounting: Threaded Attachment: 3 bolts, bolt circle 225 mm Distance 195 mm Spigot: 200 mm Bore: 55 mm Height: 130 / 185 mm Accessories: Interchangeable jaws Weight: 36 kg

Condition: good (used), Powered roller conveyor, L 2450 mm, W 620 mm, NORD gear motor, data according to the nameplate. To operate the roller conveyor, a control unit must be installed, preferably with a frequency inverter for speed regulation. The roller conveyors were set up on the floor. See the attached photo with the leveling plate. Price per unit. 24 units available. Bedpsx Tfrxofx Adholp

Condition: used, functionality: unexamined, Ferwood Code: RU0011694 - Manufacturer Code: FSP350-60HLN - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer a refurbishment service, please contact us. 2KG 36X26X21cm Bedpfx Adjyk E R Ushjlp

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,900 kg, Equipment: documentation/manual, ECKOLD KF 653 C / Power Former & Various Tools / Sets -Reach - Horizontal approx. 600mm -Reach - Vertical approx. 480mm -Working stroke 8mm -Formable sheet metal thicknesses: Steel (Steel N/mm2) max. 6mm Aluminum (250 N/mm2) 8mm Stainless steel (600 N/mm2) 4mm -Ram adjustment approx. 80mm -Foot switch -Tools (SEE PICTURES) Bsdpjz Azrwsfx Adhjlp -Sheet metal forming tool description & spare parts lists -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: new, Year of construction: 2023, functionality: fully functional, Manufacturer: CGM Continuous power, 3-phase: 41.0 kVA / 32.8 kW Maximum power, 3-phase: 45.1 kVA / 36.0 kW Voltage: 230 / 400 Volts Frequency: 50 Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA, approved for stationary operation only Cooling system: Water Fuel: Diesel Cylinders: 4 Displacement: 3319 cm³ Intake: Normal Speed: 1500 rpm Bsdjz Snyxepfx Adhjlp Fuel consumption at 3/4 load L/hour: 8.5 Generator: MECC ALTE Type: Brushless AVR regulation Digital control ComAp AMF Load connection panel Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Weight, dry: 880 kg Fuel tank capacity: 200 l Oil collection tray Coolant preheating Battery trickle charge 3-way valve Soundproof enclosure: RAL 3000 Red Base frame: Black

Condition: new, Year of construction: 2026, 0,4-8 mm Bedpfszu A R Ssx Adhslp Workingpiece thickness from to 8-60 mm Total length 4930 mm Feed speed 10 m/min. Weight 1500 kg

Condition: used, 2 units, diesel-powered generator sets, 400 kVA. Bljdpfx Asz E Ayredhop

Condition: used, Year of construction: 2009, functionality: unexamined, power: 196 kW (266.49 HP), total height: 2,570 mm, total length: 3,500 mm, total width: 1,200 mm, 2G / WEIER Gas CHP – Engine/Generator Set Gas-powered combined heat and power plant from 2G. The unit is housed in a soundproof enclosure and features a gas control system, heating and engine circuits, and a heat exchanger. Unit/Engine: WEIER Type: GEN.DASGM 250/4L Year of manufacture: 2009 Voltage: 400 V Frequency: 50 Hz Rated current: 400 A Power: 196.0 kW Speed: 1,514 rpm Power factor: cos φ 0.86 Blodjzzbhpepfx Adhop Protection class: IP54 Insulation class: F Max. ambient temperature: 70 °C Max. operating pressure: 6 bar Marking: CE / EN 60034/05 Ignition system: Manufacturer: Altronic Inc. Type: CD200 – Programmable Ignition P/N: 791070-6 S/N: 3218 Supply: 12–24 V DC Max. ambient temperature: 105 °C Location: Neuenkirchen-Vörden, Germany An inspection of the unit is possible after prior arrangement. If you are interested or have any technical questions, please feel free to send us an inquiry. We will provide you with further information and documents upon request.

Condition: used, functionality: unexamined, overall weight: 1 kg, total length: 360 mm, total width: 260 mm, total height: 21 mm, Ferwood Code: RU0012094 - Manufacturer Code: 6ES7407-0DA01-0AA0 - Condition: Used - Functionality: Not tested - Compatible Machine: HOLZMA panel saw - If interested, we offer a refurbishment service; please contact us. Bledpfx Adoz Akydshop

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Bsdewd Nw Tjpfx Adhjlp Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.