Power chuck three-jaw chuck

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0250A0472, laser power: 5,000 W, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS Travel range, X-axis: 4,000 mm Travel range, Y-axis: 2,000 mm Laser power: 5,000 W Kedpfxozkr T Uo Acfelw MACHINE DETAILS Mains voltage: 400 V / 50 Hz Connected load: 105 kVA Control voltage: 24 V DC Required fuse rating: 3 x 160 A Compressed air connection: 7 to 10 bar Nitrogen connection N₂: 30 bar Oxygen connection O₂: 20 bar

Condition: good (used), Year of construction: 2007, Machine is in good working condition. Machine come without automatic line. Marked equipement with red not come.. Some accesories and machine equipement are also available. More specs of the machine, check last two pictures. Kljdpfoxf Iamex Acfow

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: M704025, sheet thickness (max.): 100 mm, overall weight: 4,650 kg, passage width: 1,300 mm, TECHNICAL DETAILS Material thickness: 0.8 to 100 mm Passage width: max. 1,300 mm Workpiece dimensions: min. 180 x 100 mm Workpiece weight: max. 250 kg/m Feed rate: 0.2 to 6 m/min MACHINE DETAILS Dimensions & Weight Dimensions: 2,200 x 2,900 x 2,200 mm Machine weight: approx. 4,650 kg EQUIPMENT Klsdpozkr Rtofx Acfjw Processing: on both sides, dry

Condition: ready for operation (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, machine/vehicle number: 07/21/158, power: 55 kW (74.78 HP), fuel type: electric, hopper volume: 2,800 l, rotational speed (max.): 90 rpm, rotor diameter: 500 mm, The machine has been used very little and is therefore in good condition with new blades! TECHNICAL DETAILS Infeed and Hopper Infeed opening: 1,800 x 1,500 mm Hopper capacity: 2.8 m³ Rotor Rotor diameter: 354 - 500 mm Rotor speed: approx. 90 rpm Klodpezkg Sfjfx Acfjw Tools and Screening Tools V5 + V7: 45 / 90 / 135 / 180 pcs. Screen opening: 10 - 50 mm Extraction Extraction nozzle diameter: 250 mm Air velocity: 32 m/s MACHINE DETAILS Performance and Drive Power: 55 kW (74.78 hp) Fuel type: electric Power requirement, dual drive: 2 x 45 / 2 x 55 kW Weight: approx. 5,800 kg EQUIPMENT Rotor shaft made of solid steel Hydraulic feed for constant material flow to the rotor Cardan-mounted hydraulic cylinders to prevent premature wear of the piston seals Screens with various screen openings for the required chip size, depending on the material and application Safety package with gearbox limit switch and reversing counter Changeable basket available New blades Note: Further technical information, such as the machine dimensions, can be found in the attached data sheet.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Klodpfxowqb Scj Acfew Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Kedpfxozka Hij Acfelw Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! Kledpfx Acszka Aksfew TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 rpm Number of tool slots in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Strip filter system with internal cooling, 20 bar, with dual switching filter Documentation: Hedelius + Siemens Sinumerik Infrared probe: Renishaw

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Klsdpeuz If Njfx Acfjw Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 504.856, overall weight: 50 kg, load capacity: 6 kg, arm reach: 700 mm, controller model: KRC4, TECHNICAL DETAILS Load capacity: 6 kg Reach: 700 mm MACHINE DETAILS Controller: KRC4 Weight: 50 kg Performance data Connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Ksdpfx Ajzidmqjcfslw Mains fuse: 16 A

Condition: ready for operation (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 1.302.981, overall weight: 280 kg, load capacity: 20 kg, arm reach: 1,813 mm, controller model: KR C4 NA UL, TECHNICAL DETAILS Load capacity: 20 kg Reach: 1,813 mm Ksdpfozidhusx Acfelw MACHINE DETAILS Controller: KR C4 NA UL Total weight: 280 kg Operating hours: approx. 500 hours EQUIPMENT Teach pendant (manual control) Safety enclosure with Siemens PLC 2 × SICK laser scanners 4 × Light curtains

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm Kjdpfx Ajwwl I Iocfjlw workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago

Condition: excellent (used), functionality: fully functional, overall weight: 1,100 kg, workpiece width (max.): 230 mm, workpiece height (max.): 320 mm, No minimum price – guaranteed sale to the highest bidder! The system was only used for demonstration and testing purposes and is therefore in very good condition. TECHNICAL DETAILS Number of satellites (workpiece holders): 6 Number of spray nozzles: 6 Ksdpezh Nggsfx Acfslw Maximum workpiece height: 320 mm Maximum workpiece width: 230 mm Movement: Rotational movement of the satellites, horizontal up/down movement Settings: Adjustment of the number of strokes, speed, and height of the lifting movement MACHINE DETAILS Control system: PLC Siemens Total weight: 1,100 kg EQUIPMENT Light curtain

Condition: ready for operation (used), Year of construction: 2008, operating hours: 2,288 h, functionality: fully functional, machine/vehicle number: 936, workpiece weight (max.): 150 kg, power: 8 kW (10.88 HP), workpiece length (max.): 800 mm, workpiece width (max.): 600 mm, number of support arms: 16, No minimum price – guaranteed sale to the highest bidder! The machine is equipped with an optional support system and can therefore accommodate one large workpiece or a maximum of 16 smaller workpieces on the supports. TECHNICAL DETAILS Turbine power: 8 kW Workpiece size (single workpiece) max.: 800 x 600 mm Workpiece weight (single workpiece) max.: approx. 100 kg Number of positions in the support system: 16 Workpiece size (on support system) max.: 200 x 200 mm Workpiece weight (on support system) total max.: 150 kg Filter data Number of filter cartridges: 2 Total filter area: 20 m² Filter area per filter cartridge: 10 m² Air velocity: 1.25 m/min Compressed air data Compressed air pressure: max. 4–5 bar Compressed air consumption: approx. 7 m³/h Compressed air connection: G 1″ Permissible negative pressure: max. 1,500 Pa Dust container: 20 l Residual dust content in the exhaust air: below 5 mg/m³ MACHINE DETAILS Control unit: Pulse/time: 24 V, 1 phase, 50 Hz Solenoid valves: Voltage: 24 V, 50 Hz Timer: Input/output voltage: 24 V, 50 Hz Operating hours: 2,288 h Fan data Air flow: 2,000 m³/h Static pressure: 1,800 Pa Total pressure: 2,000 Pa Power consumption: 2.2 kW Motor power: 1.1 kW Motor voltage: 400 V Motor frequency: 50 Hz Motor phases: 3 phases Kljdpezh Nf Asfx Acfsw EQUIPMENT Filter cartridges with 10 m² filter area each Aluminum venturi tubes Solenoid valves, type CA 25 DD Timer CG 03.06/04 Filter group Pressure regulator Pressure gauge 1″ ball valve Dust container, 20 l Fan

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) Kjdorbz T Njpfx Acfjlw - Radial compensation of the tool by means of patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, workpiece weight (max.): 15 kg, inner dimension height: 95 mm, inner dimension length: 260 mm, negative pressure: 10,000 Pa, No minimum price – guaranteed sale to the highest bidder! Klsdjzh Eiqspfx Acfew Cleaning machine as a single-chamber flood system operating under full vacuum. The machine will undergo a complete overhaul in 2026 with an estimated value of €16,800 and is in very good condition. The original new price of the machine was €104,000. TECHNICAL DETAILS Cleaning medium: halogen-free hydrocarbon or modified alcohol Cleaning basket dimensions: 260 x 160 x 95 mm Batch weight max.: 15 kg MACHINE DETAILS Overall length: 1,260 mm Overall width: 1,110 mm Overall height: 2,600 mm Total weight: 1,600 kg EQUIPMENT CE marking in roll-on/roll-off standard version Complies with the 31st German Federal Immission Control Ordinance (BImSchV) (as of August 21, 2011) Complies with the Swiss Air Pollution Control Ordinance (as of March 1, 1998) Complies with the Austrian VAV Ordinance (as of July 26, 2022) Complies with the EU VOC Directive 199/13