Used Pre Heater for sale (15,716)

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 17.8 kW Ncedpfxedlmnno Adtjr For rooms up to approx. 300 - 400 m³ (according to DIN 4108) Filling volume: 78 ltr Mass of the filling opening: Ø 215 mm Flue outlet: rear side (standard) Flue pipe Ø 180 mm Required chimney draught min. 13 Pa Weight: 250 kg Efficiency: 79,02 Energy efficiency class: A The room heaters GRA-N are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: new, Year of construction: 2026, Heat output / nominal heat output: 16.5 kW For rooms up to approx. 300 to 400 m³ (according to DIN 4108) Flue pipe outlet: rear side (standard) Flue pipe: Ø 180 mm Filling chamber volume: 80 ltr Required chimney draught min. 12 Pa Dimensions of the filling opening (L x W) 300 x 340 mm Weight: 370 kg Efficiency 85,88 Energy efficiency class: A+ Ncodjdlmn Hspfx Adtsr The EWI-A 15 space heaters are type-tested according to DIN EN 13240, according to 15a B-VG (Austria) and LRV (Switzerland). They comply with the 1st BImSchV (Federal Immission Control Ordinance) stage 2.

Condition: good (used), table length 1,500 mm / width 760 mm, Motor 4.0kW Ncodsimz D Uepfx Adtsr (originally for REX HOMS 760) Chip removal of the pre-dressing knife shaft max. 10 mm Speed of the blade shaft VA D=140 mm, Z4: approx. 4200 rpm. suction connection D= 140 mm Condition functionally tested >>REX New price over 20,000 €

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Njdpfsu Thhrjx Adtocr Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 20 h, Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• Ncodsf N Nk Hspfx Adtsr • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz• • Hopperopening 1600 x 700mm • Main dimensions L 2400 x B 850 x H 1600mm • Outlet opening ca 400x 140mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes Nsdpsf Sgcbjfx Adtscr • Weight ca 1300 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, Shredder typ PYTHON 1600, with 11 KW electricmotor, 400V 50Hz• • Hopperopening 1600 x 700mm • Main dimensions L 2300 x B 850 x H 1600mm • Outlet opening ca 400x 140mm • Height under output ca 400mm Nodef N Narepfx Adtocr • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1800 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Nedpfxjwtg Hdj Adtocr

Condition: ready for operation (used), A total of 71 Kroll air heaters are available, 30x LH 130 V10, 1x LH 130 V20, 7x LH 230 V10, 3x LH 330 V10, 1x LH 420 V10, 6x LH 430 V10, 1x LH 430 V20, 11x LH 530 V10 and 11x LH 630 V10. The fans are used and partly have bent fins and scratches. An on-site inspection is possible. Nodpfjw Uk A Dex Adtocr

Condition: ready for operation (used), Year of construction: 2019, An AFS printing, laminating and coating system (corona pre-treatment) is available. Roller width: 2700mm, electrode width: 2500mm, max. mechanical speed: 250m/min, max. generator output: 6kW, operating mode: 1- and 5-core operation, electrode material: ceramic, discharge roller: ceramic, cooling type: water-cooled, pressure rollers: both sides. Documentation available. On-site inspection is possible. Njdpfx Aovrip Hodtjcr

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Nedpfx Adeyffyljtocr Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: like new (used), Manufacturer: Kleemann Type: VU1S 1240ST Size: 1.200 x 4.000mm Mach. No.: 38016201 Year of Manufacture: 1998 Deck: 1 (Ca. 80mm Deck opening) Included: – Electrical Motor – Springs Ncodpfx Aog Sty Ejdtor Vibrating screen can be sandblasted and painted.

Year of construction: 2020, condition: refurbished (used), For suction diameters from 120 to 700 mm. Nsdpfxjftb Ebo Adtecr Please let us know your volume flow and we will select the right cyclone for you. Different versions available: - Legs, made of painted square steel profiles - Rotary valve and transition piece with inspection flap - Inlet box with non-return valve - Tangential outlet with/without pressure relief surface - Square diffuser with/without pressure relief surface - Sound insulation Of course you can also obtain all accessories from us such as fans, exhaust pipes, deflector hoods etc. Functionality: The polluted air is tangentially fed into the cylindrical upper part is introduced, causing the air to rotate. The material is placed under the Influence of the centrifugal force in the direction of the cyclone circumference pressed out and led out through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located Outlet pipe on top. The deposition efficiency increases with the feed rate, but also the pressure loss and thus the energy consumption. It is therefore it's important to find a good compromise. We have developed a range of cyclones optimised for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industry At the bottom, the cyclone can be designed with the correct size based on the air volume and a typical pressure drop in the range of 1000 Pa can be selected. Operating pressure +/- 5

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust Nodpfx Ajx Upqhjdtecr The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, mileage: 24,152 km, power: 118 kW (160.44 HP), color: red, gearing type: mechanical, Year of construction: 1990, Iveco-Magirus 75-16 AW 4x4 LF8 Firefighting Vehicle Auxiliary heater, differential lock, gearbox reduction, manual transmission, 9 seats, trailer coupling: 40mm Rockinger, additional rear spotlights, engine brake, air horns, revolving beacons, fog lights, headlights: halogen, front-mounted pump, front flashers, permissible gross weight: 7,490 kg, unladen weight: 5,580 kg, payload: 1,910 kg, tire tread depth: 1st axle 15-16mm, 2nd axle 16-17mm On request, we can provide you with a leasing or financing offer. Mr. Seidel (Tel.) will be happy to assist you. For more information, please visit our homepage. Errors, changes, and prior sale excepted! Auxiliary heater Cab: Double cab = More information = Ncsdpfx Adeyfvd Istor Cab: double Intended use: Goods transport Engine capacity: 6,086 cc Gross vehicle weight: 7,490 kg Last inspection: 07/2024 Please contact Tobias Ebert for further information.

Condition: used, mileage: 24,152 km, power: 118 kW (160.44 HP), axle configuration: 4x4, color: red, gearing type: mechanical, Year of construction: 1990, Iveco Magirus 90-16 AW LF8 Firefighting Vehicle - 9 seats - Pump: FP 8/8 - Auxiliary heater Ncsdpjyfu Sksfx Adtjr - Manual gearbox - Differential lock - Transmission reduction - Trailer coupling: 40mm Rockinger - Additional rear work lights - Engine brake - Air horns - Rotating beacons - Headlights: halogen - Fog lights - Front-mounted pump - Front warning strobes - Gross vehicle weight: 8,800 kg - Curb weight: 5,580 kg - Payload: 3,220 kg - Tyre tread depth: 1st axle 15-16 mm, 2nd axle 16-17 mm Leasing or financing offers available upon request. Mr. Seidel (phone) will be happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale! Cab: Double cab = More information = Cab type: double Engine displacement: 6,086 cc GVW: 8,800 kg External dimensions: 0x2500x3000 Last inspection: 07/2024 Please contact Tobias Ebert for more details.

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• Ncsdpfxsgn Hcbo Adter • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 420mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm Nedpfx Ajf N Nlvjdtscr • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2022, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland” Ncodjf N Nl Dspfx Adter

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• Nsdpfx Aef N Nlrodtscr • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: excellent (used), Year of construction: 2022, Several heat exchangers for sale from hydrogen pilot plant, please see detailed information attached. Two of them are electrical. Price 3000EUR each Njdjxlgpaepfx Adtocr

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Connected load 11.8 A Nedpfx Aoqvmcpjdtocr Dimensions 54x29x80 cm Weight 15 kg

Condition: good (used), Year of construction: 2008, operating hours: 18,000 h, functionality: fully functional, EPS Erlenbach Pre-expander EVD 1000 Ncsdpfx Adeyuudfotor Batch EPS foam pre-expander unit with automatic weighing system and fluidized bed. Regularly maintained, currently operational, and in daily use. Year of manufacture: 2008

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm Nodpfxjxv Akze Adtocr The pipes have previously been installed and riveted.

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Ncodpfx Asygbbzedter