Used Press Brake Safan for sale (52)

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Lsdout S E Njpfx Ah Ueak Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Model: DNCS 110 3100 Capacity: 3100 x 110 tons Laodpfxox I Nzye Ah Uok CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition Lajdoxpqy Dspfx Ah Usk

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,089 h, General Data Lsdpfx Asx D Eansh Uoak Measurements height 2810 mm Machine weight 6400 kg Measurements depth 2140 mm Main Drive Number of axis 6 Bending length 3060 mm Stroke 300 mm Pressing force 1000 Kn Movement X-Axis Movement 600 mm Y-Axis Movement 300 mm Dimensions Machine Length 4175 mm This servo-electric SAFAN E-Brake 100-3100 press brake was manufactured in 2021. It offers a pressing force of 1000 kN and a bending length of 3060 mm. The machine is equipped with a CNC-controlled backgauge with X, R, Z1, and Z2 axes. If you are looking for high-quality bending performance, consider the SAFAN E-Brake 100-3100 that we have for sale. Contact us for more information Application Types Bending

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: K 3945, working width: 3,100 mm, stroke length: 300 mm, pressing force: 170 t, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Laedpfx Ahowlqa Sj Uek Connected power: 11 kW Working range Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Weight: 12,500 kg Top beam stop time: < 94 ms

Condition: good (used), Pressure 110 Ton Edge length 3100 mm Year of construction 1990+ retrofit Stand width 2600 mm Steered axles Y1,Y2,X axis Laedpfjw Hx Rzjx Ah Uek Control Esa S630 control Including Wila Sealing stamp

Condition: good (used), functionality: fully functional, Year of construction: 2004, The machine is in good technical condition. Nominal forming force: 65t Working length: 2550mm Weight: 5500 kg Inspection in operation is possible by prior arrangement. Lasdpsxtqvmefx Ah Uek

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Capacity: 3100 x 100 tons Laodpfx Ahex I Nzge Uek Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Wila hydraulic tool clamping Available directly from January 7

Year of construction: 2017, operating hours: 14,746 h, condition: ready for operation (used), General Data Machine weight 4750 kg This 4-axis SAFAN E-Brake B 50-2050 press brake was manufactured in 2017. It features a maximum pressing force of 500 kN and a bending length of 2050 mm. Equipped with an EC 20 control unit, it ensures precision with programmable backgauge axes including X and R. Ideal for high-capacity bending tasks, consider the opportunity to buy this SAFAN E-Brake B 50-2050 press brake. Contact us for more information. Lasdpfxox D Ia Dj Ah Uok Application Types Bending

Condition: good (used), functionality: fully functional, Year of construction: 1999, Neat used press brake from Safan Type CNCL K 110 3100 Safan TS1 control Capacity 3100 x 110 ton Laodjxzff Sepfx Ah Usk Y1, Y2 and X axis CNC controlled CNC Bombering Set of tools included

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 3-meter CNC press brake from Safan Model: H Brake 120 3100 Year: 2005 Capacity: 3100 x 120 tons Lajdpfoxtbquox Ah Usk CNC control of Y1, Y2, X, XDelta, R, Z1, and Z2 axes WILA new standard tool clamping Upgraded ESA graphical controller Lazersafe laser system

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used small press brake from Safan Model: UCK 50 1250 Capacity: 1250 x 50 tons Year of manufacture: 1990 Y1, Y2 and X axes (manual) Laodpfxjxp Rg Ro Ah Uek 1 set of tools

Condition: used, Year of construction: 1996, Used CNC press brake from Safan Type: SMK 40 2050 Capacity: 2050 x 40 ton Ljdpfx Ahjwrz Ugs Ujak Y1, Y2 and X CNC controlled 1 set of tools included (not in the pictures)

Condition: good (used), Year of construction: 2001, Used CNC press brake from Safan Type: SMK 40 2050 TS1 Laedpfx Aewrz Sfjh Uek Capacity: 2050 x 40 ton Y1, Y2, X, R, Z1 and Z2 CNC controlled Euro tool clamping Year of manufacture: 2001

Condition: good (used), Year of construction: 2007, Gebruikte 3 meter Safan E Brake Type: E Brake 100 3100 TS1 Capaciteit: 3100 x 100 ton Safan Touch screen besturing Y1, Y2 en X CNC gestuurd Handmatige R as (voorzijde) Euro/Amada gereedschapopspanning Bouwjaar: 2007 Ljdpfswmcz Dex Ah Uoak 1 set gereedschap inbegrepen

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Safan TS1 besturing Lodpewz I Ekefx Ah Ueak Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd CNC Bombering Wila New Standard gereedschapsklemming

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling Ledpfjx Imkfjx Ah Ueak 5 axes: X / X' / R / Z1 / Z2 Capacity: 50 ton x 2550 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, distance between stands: 2,550 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, Max. bending length 3100 mm Distance between column 2550 mm Max. pressing force 120 T Dis. Beam - Table 470 mm Beam stroke 180 mm Troth beam 400 mm Approch speed 200 mm/min. Working speed 10 mm/min. Return speed 120 mm/min. Adjustment X-Axis back gauge 1000 mm Number of controlled axis Y1 / Y2 / X/ Z1 / Z2 / R-Central Control TS1 Crowning Yes Lsdpfsxyw Sbjx Ah Usak Hydraulic toolclamping Yes Power 7.5 kW

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Control system brand: Delem - Control system type: DA-53T - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 40 - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Punch holder: Standard - Tool holder type: WILA-standard - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Lsdexwmwbjpfx Ah Uoak VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2019, number of axes: 3, This 3-axis SAFAN Darley E-Brake Premium press brake was manufactured in 2019. It features a CNC-controlled servo-electronic system with Y1/Y2, X, and R axes, and a stroke of 300 mm. The EC10 control system supports multiple file formats and includes safety equipment compliant with European directives. Ideal for precise bending operations, consider the opportunity to buy this SAFAN Darley E-Brake Premium press brake. Contact us for more information about this machine. Lajdsx Np Ehspfx Ah Ujk • Control and software: • EC10 control with split-screen on a height-adjustable swivel arm • SafanDarley EC Control with center-mounted swivel arm (operation from either side) • Displays DWG, DXF, PDF, JPG, PNG, BMP, WMV • German language instructions and HMI • EC20 software package for EC10 split-screen incl. EC Profiler with 2D bending simulation • Automatic bend sequence calculation and graphical representation for AutoPol and Radan files • Axes and travels: • CNC-controlled Y1/Y2 (stroke 300 mm) • CNC-controlled X-axis • CNC-controlled R-axis • CNC-controlled Z1+Z2 (Type G) with programmable independent lateral adjustment of backgauge fingers • CNC-controlled dX-axis on Z2 finger, 100 mm stroke (+/- 50 mm), with hardened 3D backgauge cams • Enlarged installation dimension Q = 650 mm, stroke 300 mm • Tooling and clamping: • NSCL-II HC Premium upper tool adapter with hydraulic clamping, hardened surface, incl. hydraulic unit • Upper tool working height 80 mm; clamping length 1275 mm • OB II HC Premium mounting table with adjustment wedge, hydraulic clamping, hardened surface • Mounting table size 110 x 87 x 1275 mm, incl. hydraulic unit • Measurement: • E-Bend S sheet thickness measurement at the Z1 backgauge finger • Safety and lighting: • CNC-programmable safety light curtain • Safety equipment compliant with EU Machine Directive MRL/2006/42/EG • Front-side work area lighting and rear-side tool lighting • Ergonomics (machine-integrated): • Ergonomic package: lower beam with legroom recess and tilted footrest • Foot pedal usable on the footrest or on the floor • Identification and logistics: • Customs tariff number: 8462 2110 • Main machine weight: 3250 kg; dimensions: 2330 x 1809 x 2649 mm • Secondary pallet: 90 kg; 1300 x 800 x 900 mm Additional equipment • Ergonomic table system: central segment (height and tilt adjustable) and left/right segments (height adjustable) • Adjustable chair with seat, footrest, and backrest adjustment on swivel casters • Left-side material cabinet with five height-adjustable shelves

Condition: excellent (used), Year of construction: 2005, control type: CNC control, bending force (max.): 120 t, working width: 3,100 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, back gauge travel distance Z-axis: 1,000 mm, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Lasdpfx Ahjxzf Dzj Ujk Number of controlled axis: Y1 / Y2 / X / Z1 / Z2 / R-Central Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t working width: 4300 mm clear support width: 3600 mm support throat: 300 mm Lajdpfx Aj Dnf Ush Ujk max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Lsdpox Ed H Aefx Ah Ujak

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Laodpfx Aex Dr U Esh Uok

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Please request further details and photos. We can purchase your faulty press brake. Laodox Dr Dajpfx Ah Uek