Used Press Cehia for sale (27,659)

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Isdsxgv E Tjpfx Ag Notn Gewicht: 1650 kg

Condition: used, Year of construction: 1964, pressure 10 t throat 235 mm stroke ca. 400 mm Itodpjvgnqfefx Ag Njn stroke speed - idle stroke downwards 4,5 m/min stroke speed - idle stroke upwards 10 m/min dayligth ca. 500/600 mm table-size ca. 450 x 400 mm ram hole 32 mm total power requirement 2,2 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 0,95 x 0,45 x 2,1 m Hydraulic single-column press - from a training workshop, no guarantee on UVV, with two-hand control via separate control panel. Work only with safe tools or solid shields! Machine only works in full stroke, the stroke limiter of the ram cannot be regulated because the adjustment chain needs to be repaired, so it is sold at a special price. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1988, pressure 180 t chamfer lenght 3100 mm distance between columns 2550 mm control Konventionell throat 270 mm back stop - adjustable 550 mm work height max. 900 mm total power requirement 15,0 kW weight of the machine ca. 8,2 t dimensions 3,2 x 1,3 x 2,47 m - 1 upper tool, - 1 lower tool, pointed Iedpfxexcg E Aj Ag Nstn - Motorized backgauge - 2 support arms - Additional upper tool, split, deer foot - Additional lower tool 2170mm

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 60 t, overall weight: 925 kg, stroke length: 50 mm, Pressure, tn: 60 Throat/reach: 130 mm. Table size: 250 x 225 mm. Stroke: 50 mm. Motor: 11 kW./15 HP. Country of origin: Denmark. Year: 2000 Size (L x W x H): 800 x 900 x 1600 mm. Weight: 925 kg. Max tool height: 220 mm. Working pressure: 200 bar. Itodexphtbspfx Ag Nsn All our machines are tested and serviced before delivery.

Condition: used, Single-column hydraulic press SCHULZ Type SES 250 . 04.86.3511/3 Year of manufacture: 1986 Pressing force: 25 tons Return force: 10 tons Throat depth: 360 mm Table size: 600 x 720 mm Ram area: 500 x 500 mm Clear hole in table: Ø 100 mm Clamping pin bore: Ø 40 mm Ram stroke: 400 mm Maximum installation height: 600 mm Table height above floor: 935 / 775 mm Hydraulic tank capacity: 380 liters Drive power: 7.5 kW Power connection: 380 Volt, 50 Hz Itjdpfx Agohl Npqe Non - Adjustable fixed stop in the press cylinder 180 mm, with hand crank adjustment - SICK light barrier - Two-hand operation - Base made of 160 mm U-steel Space requirement (L x W x H): 1900 x 1300 x 3100 / 3260 mm Weight: 3.6 tons Good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 60 t, working width: 2,550 mm, number of axes: 8, type of crowning: CNC-controlled, pressing force: 60 t, working range: 2,550 mm, Equipment: CE marking, documentation/manual, lower tooling, safety light barrier, upper tooling, Used quality 2005 BYSTRONIC EDWARDS PEARSON PR60 x 2550 8axis cnc Press Brake for sale High specification and highly accurate Cnc downstroke pressbrake for sale – Video at the bottom of the listing running in our stock Bed length 2.5metre Year / new: 2005 Model: PR60x2550 Isdpfx Aswihk Ajg Notn Capacity / tonnage: 60ton / 600KN Complete with quality Swiss made Cybelec MODEVA 12 CNC Control 8axis in total – Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge Max stroke 215mm Hydraulic crowning Hydraulic tool clamping system FIESSLER Light Guard System Associated Tooling – per photographs Fully serviced with Bystronic uk

Condition: good (used), Year of construction: 2005, 1 used hydraulic press brake Make: Knuth Model: AHK 31160 Year of manufacture: 2005 Technical data Working length: 3000 mm Press capacity: 160 t Stroke: 175 mm Equipped with: Elgo control Foot pedal Itjdsxnp A Uepfx Ag Nen Tooling

Condition: used, pressure 6 t dayligth 180 mm spindle diameter 32 mm throat 115 mm ram stroke 90 mm table surface area 300x270 mm Itodovgnnwspfx Ag Nsn weight of the machine ca. 70 kg dimensions of the machine ca. 800 x 1350 mm 6 t (estimaeted) hand-operated spindle press. The machine is professionally and durably lashed. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1769, control type: manual, degree of automation: manual, actuation type: hydraulic, bending force (max.): 25 t, working width: 2,000 mm, stroke length: 60 mm, Machine weight 2400 kg Itsdoxpf Txopfx Ag Nen

Condition: used, functionality: fully functional, throat depth: 130 mm, pressing force: 45 t, overall weight: 900 kg, stroke length: 35 mm, Pressure, tn: 45 Throat/reach: 130 mm. Table size: 250 x 225 mm. Stroke: 35 mm. Motor: 11 kW./15 HP. Country of origin: Denmark. Size (L x W x H): 800 x 900 x 1600 mm. Weight: 900 kg. Max tool height: 220 mm. Working pressure: 200 bar. All our machines are tested and serviced before delivery. Isdpsxphrqjfx Ag Nstn

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system Ijdpfjgp T Euox Ag Notn - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: good (used), Year of construction: 1990, Machine No.: 5048, Control unit by Delem, type DA-65W, Pressing force 3,000 kN, Bending length 4,100 mm, Distance between uprights 3,550 mm, CNC-controlled X/R axis, CNC-controlled crowning, Hydraulic punch clamping, Laser safety system by Trumpf Ijdpfx Agsxl D Due Njtn

Condition: as good as new (ex-display), The SHP 200 is a robust workshop press designed for professional use within the category of Workshop Presses. Built with a torsionally rigid welded gantry-style frame made from thick-walled sectional steel, this hydraulic workshop press ensures stability and performance during various applications, such as pressing in and out bearings, assembly, and straightening work. Its finely adjustable press force, able to exert up to 200 tons, along with a 400 mm stroke, makes it highly versatile for tasks involving axles, supports, and shafts. The movable working cylinder allows lateral positioning for easier set-up without needing to move the workpiece, while a height-adjustable worktable and safety bolts enhance operational safety. Operators can easily monitor the press's working pressure, thanks to a convenient gauge. KNUTH's SHP 200 workshop press stands as an indispensable tool in technical workshops and maintenance departments. To experience its capabilities, order now. Isdpfeuyg Adex Ag Netn

Condition: used, functionality: unexamined, Maweg Euronova S Hydraulic Frame Clamp Itodpfxew Tm Akj Ag Nen

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term Itedpfx Ajw Nafksg Nen

Condition: used, functionality: fully functional, Year of construction: 1991, bending force (max.): 135 t, working width: 3,100 mm, stroke length: 150 mm, throat depth: 250 mm, distance between stands: 2,590 mm, overall weight: 7,800 kg, Capacity: 3100 x 135 tn. Backgauge: Manual, operated from the front. Distance between frames: 2590 mm. Stroke: 150 mm. Throat: 250 mm. Tools: 1 set. Full length. Year: 1991 Country of origin: Belgium. Size (L x W x H): 3500 x 2100 x 2400 mm. Weight: 7800 kg. Itjdpfx Ajxphcvjg Njn

Condition: like new (used), Year of construction: 2008, machine/vehicle number: CA7-360 NG, Rotary press-on capper 7 station incl hopper/sorter Left-right Central greasing Vögel Pneumatic Festo Siemens S7 controlled min 5.500-max 17.000 cap/hr electric height adjustment Isder Iyi Topfx Ag Njtn tooling capping heads: Diam 65mm/27,4mm Hight Diam 75mm/32mm Hight Diam 94,5mm/40,3mm Hight container size tooling for glass bottle: Diam 65.5mm/104mm hight Diam 75,5mm/140,7mm hight Diam 93,3mm/180mm hight electric 6Kw 400v Pressured air minimum 5bar Machine is in excelent condition.

Condition: excellent (used), functionality: fully functional, die cushion stroke: 400 mm, table width: 1,900 mm, table length: 3,000 mm, installation height: 1,800 mm, distance between stands: 3,040 mm, pressing force: 1,000 t, die cushion force: 400 t, stroke length: 1,400 mm, ram plate width: 1,900 mm, ram plate length: 3,000 mm, Technical data: FORCES Ram force: 10,000 kN Ram return force: 1,000 kN Ram cushion force: 2,000 kN Drawing cushion force (blank holder): 4,000 kN STROKES Ram stroke: 1,400 mm Ram cushion stroke: 200 mm Drawing cushion stroke: 400 mm Die height (table to ram) Stroke upper position: 1,800 mm Stroke lower position: 400 mm Table size: 3,000 x 1,900 mm Ram size: 3,000 x 1,900 mm Clear space between uprights (left/right): approx. 3,040 mm Table height above floor: 450 mm Table plate as sliding plate Sliding direction: front Sliding travel: 3,000 mm Sliding speed: 0.5 - 6 m/min Load capacity: 20 t Table and ram deflection at F=max. 2/3 surface load: 0.125 mm/m Itjdpfx Asxpctcjg Nsn Drawing cushion size: 2,450 x 1,550 mm Drawing cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Ram cushion size: 2,450 x 1,550 mm Ram cushion hole pattern From left to right: 17 rows = 16 spaces at 150 mm each From front to back: 11 rows = 10 spaces at 150 mm each Height above floor: approx. 7,700 mm Weight, static: approx. 160,000 kg Installed power, total: approx. 265 kW Drive power (main drives, 2 x 110 kW): 220 kW SPEEDS Ram Rapid down speed: approx. 600 mm/s Working speed max. up to 2,500 kN: approx. 37 mm/s Working speed F max.: approx. 16 mm/s Return speed: approx. 430 mm/s Die spotting speed: approx. ≤ 10 mm/s The above information is taken from the machine documentation. The seller accepts no liability for completeness or accuracy. The actual technical data and functions of the machine are decisive.

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 Itedpfjxl Tmfsx Ag Nen The press has a table size of Length Width Thickness 1000 390 60 mm Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 17000 kg Main Drive Number of axis 2 Max Material Thickness Steel 6 mm Stainless steel 3 mm Aluminium 6 mm This Nisshinbo HIQ-1250 was manufactured in 1999. It is a turret punch press with a working range of 2500 x 1250 mm, handling sheet thickness up to 6 mm for steel and aluminium, and 3 mm for stainless steel. It features a pressing capacity of 22 tons and a ram stroke of 50 mm. If you are looking to get high quality punching capabilities consider the Nisshinbo HIQ-1250 machine we have for sale. Contact us for more information. Iedpfx Agexf N Sko Netn Application Types Punching

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Itsdexhfuyopfx Ag Non

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Cybelec, controller model: ModEva Pac., bending force (max.): 60 t, working width: 1,270 mm, stroke length: 275 mm, throat depth: 410 mm, distance between stands: 1,000 mm, number of axes: 4, overall weight: 4,150 kg, power: 7.5 kW (10.20 HP), Capacity: 1270 x 60 tons Backgauge: 800 mm. With ballscrews. Distance between frames: 1000 mm. Stroke: 275 mm. Throat: 410 mm. Speed: Rapid speed down: 160 mm./sek.Bending speed: 10 mm./sek. Return speed: 170 mm. Control: Cybelec ModEva Pac. Tools: 1 set standard. Motor: 7,5 kW. Year: 2017 Iedpfx Agoxphb Eo Netn Country of origin: Turkey. Size (L x W x H): 3200 x 2500 x 2600 mm. Weight: 4.150 kg. 4 axis control 2 adjustable support arms. Quick tool clamping of upper tool. Fiessler laser lightguard. Table prepared for 60 mm. and 13 x 20 mm. lower tools. Very good condition, as new. All our machines are tested and serviced before delivery.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,331 h, machine/vehicle number: 24463, bending force (max.): 200 t, working width: 3,100 mm, stroke length: 350 mm, throat depth: 450 mm, back gauge: 800 mm, TECHNICAL DETAILS Bending force: 200 t Distance between columns: 2,550 mm Throat depth: 450 mm Iodpfx Asxgdnpsg Netn Backgauge: 800 mm Max. working width: 3,100 mm Max. stroke: 350 mm MACHINE DETAILS Control: Delem DA-69T (controlled axes: Y1, Y2, X, R, Z1, Z2 + crowning) Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,300 x 2,970 mm Weight: 10,000 kg Motor power: 18.5 kW Operating hours: 4,331 h EQUIPMENT Quick-release system Extra fingers Including tools Documentation CE marking

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-preserved hydraulic press brake HATASTAR equipped with: Iodpfx Agjfthzke Netn - CYBELEC DNC 70 control - Controlled axes Y1;Y2;X;R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press book - Documentation bending length 4600mm Stands width 4100mm Press force 1350kN stroke 220mm Rapid traverse 140mm/sec working speed 10mm/sec Retraction speed 100mm/sec Further tech. data see pdf.- document Tech. Data and dimensions: Errors excepted.

Condition: used, functionality: fully functional, Year of construction: 2003, control type: NC control, controller manufacturer: Robosoft, controller model: ATS 560 NC., bending force (max.): 200 t, working width: 3,600 mm, stroke length: 200 mm, throat depth: 300 mm, distance between stands: 3,150 mm, type of crowning: manual, overall weight: 12,500 kg, power: 18.7 kW (25.42 HP), Capacity: 3600 x 200 tn. Distance between frames: 3150 mm. Stroke: 200 mm. Throat: 300 mm. Control: Robosoft ATS 560 NC. Tools: 1 set. Full length. Motor: 18,7 kW. Year: 2003 Country of origin: Belgium. Size (L x W x H): 4900 x 2200 x 2650 mm. Itjdpfoxn Shtjx Ag Non Weight: 12.500 kg. With Lazersafe ligth guard and manual crowning table. All our machines are tested and serviced before delivery.