Used Pressta for sale (54)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Dsdpfx Adow D T Uijaocp Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: used, Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg Dodpfxjb Hw Dbe Adajcp

Year of construction: 2009, condition: used, Sawing system for aluminum with 2 saw motors that independently perform a 45° cut. Material feed unit with up to 8,100 mm Cross conveyor, storage table, chip conveyor and extraction Soundproof cabin Control via Siemens S7 panel Operating instructions etc. available, further technical data on request Machine was in operation until dismantling Dedpjqzmnuefx Adajcp Further technical data on request or see photos

Condition: used, Year of construction: 1977, height of profile 60 mm 60 weight of the machine ca. 188 kg Dodpjp Raitefx Adascp dimensions of the machine ca. 0,85 x 0,45 x 1,25 m - Fabr.-No.: 292539 - pneumatic clamping head

Year of construction: 2023, condition: ready for operation (used), An aluminium mitre saw Eisele including a mobile extraction unit AS Sägetechnik is available. 1) Mitre saw Pressta Eisele GS 600, year of manufacture: 2023, saw blade diameter: 600mm, detent positions: 22.5°/45°/90°, mitre adjustment: 20°/-90°/-20°, material stop adjustment: 200mm, working height: 970mm, extraction nozzle diameter: 100mm, weight: approx. 650kg. 2) Mobile extraction unit AS Sägetechnik 460VT-2, suction nozzle diameter: 100mm, air flow rate: 1400m³/h, machine dimensions X/Y/Z: approx. 750mm/800mm/1800mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Dedpjw D Et Rjfx Adajcp

Condition: new, Year of construction: 2024, universally usable due to double adjustable punching body for corner angles with groove dimensions of 25 - 60mm and profile chamber offset 0 - 40mm steplessly height-adjustable feelers, punching knives and backer inserts stylus and punching body are provided with scales retractable abutment for easy insertion of profiles, self-adjusting when moving forward against the profile hydraulic locking of the backer pneumatic pressing operation via a lever system ensures a synchronous punching process 2 pneumatic hold-down cylinders for clamping the profiles 2 eccentric disks for positioning the frames 2 swiveling profile support arms operation via 2 foot valves incl. standard tools Dcjdpfxehmfyhe Adaop

Condition: excellent (used), Corner jointing machine Pressta Esiele PV8 shipping EU ~300euro Dcedpfol Skl Dsx Adajp

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Djdpfxjfitbwe Adaecp Dimension 60 x 850 x 1500 mm Weight 300kg

Condition: used, Year of construction: 1996, Hydropneumatic operation Dcsdpov S D Ikofx Adajp Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 9123, Year of construction: 2008, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically Dodpfxewhpk Ie Adajcp manual feed 2.2 kW 400V motor 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm stepless milling height adjustment (handwheel and scale), adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: excellent (used), Corner jointing machine Pressta Esiele PV10 shipping EU ~300euro Dedsl Skl Iepfx Adaocp

Year of construction: 1992, condition: excellent (used), Transmission of power hydropneumatic / hydraulic Djdpfefcbb Hex Adajcp

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Djdpsvmz R Sjfx Adaecp Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: excellent (used), Year of construction: 1989, Pressta Eisele Emmegi Saw 550mm discs EU shipping ~300 euros Dcodpeg R Ifgjfx Adaop

Condition: excellent (used), Year of construction: 1988, Type: AKF 300 Motor: 400V 2.2kW Speed: 2800 rpm Cutter O: 300 mm Dodpjrblb Rofx Adaecp

Year of construction: 2005, condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Dedou T N D Uspfx Adajcp Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic material clamps Spray device

Year of construction: 1991, condition: excellent (used), Punching machine Presta Eisele HPS 120 Dcedpfxjl H Hyqo Adajp

Condition: used, Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Djdpsu T E Snofx Adajcp Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Condition: excellent (used), Year of construction: 1996, Dimension WxHxD 900 x 1180 x 750 mm Weight 235kg Working mode hydraulic - pneumatic Air pressure 6-8bar Dcodpfslf Hd Sox Adasp Air consumption 40l/stroke at 8bar Pressing force 28kN at 8bar Air connection R1/4" Punching stroke 18mm Abutment stroke 100mm Punching height max 120mm Section height max 150mm

Year of construction: 1993, condition: used, Cutter diameter: 300 mm Max. release width: 350 mm Max. release depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spray device Manual feed Weight: approx. 280 kg Dsdpferv A Hmox Adaocp

Condition: excellent (used), Year of construction: 1992, Type: AKF 250 Djdpfxoucq Nws Adajcp Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 200mm Milling depth: 85mm Profile height: 150mm

Year of construction: 1996, condition: used, Notch width: max. 200 mm Notch depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by operating the foot switch Profile clamping using a continuously pivoting vice. Dedpsq Awg Esfx Adaecp

Condition: excellent (used), Year of construction: 1999, Type: AKF 250L Motor: 400V 2,2kW Speed: 2800 rpm Cutter O: 250mm Cutter holder shaft O: 40mm Milling width: 300mm Milling depth: 85mm Profile height: 160mm Weight: approx. 150kg Djdpjtt Eb Ssfx Adascp Dimensions W x H x D 950 x1450 x 930 mm

Condition: good (used), Year of construction: 1996, Punch, complete with base frame Hydro-pneumatic drive ■ Operation via foot valve ■ Stroke length max. 40 mm ■ 25 double strokes / min. ■ Installation height max. 250 mm 130 mm projection ■ Projection with turntable 90 mm ■ Table top height 950 mm Dcedpotk Ul Rofx Adajp ■ Tappet force 90 KN at 10 bar

Condition: good (used), Year of construction: 1998, Punch, complete with base frame. Dedpfx Ajtiy R Usdaocp Hydro-pneumatic drive. Operation via foot valve. Punch force at 10 bar = 90 kN. Stroke length max. 40 mm. 25 double strokes / min. at full stroke. Installation height max. 250 mm. Projection 130 mm. Projection with turntable 90 mm. Working height 950 mm.