Used Pressing Cushion for sale (10,634)

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, We hereby offer you, subject to change, a used machine for the production of packaging cushions from old cardboard, including a suitable dust extraction system. Manufacturer cp cushion pack GmbH & Co. KG, Germany Packaging cushioning machines Type CP 422 S2i/6 Prsdpfovl Inhsx Adied Year of manufacture 2020 Drive power 1.5 kW Cushion width 420 mm Inlet height 18 mm Production output approx. 4 - 6m³/hour Working height 870 mm Feed speed 13 m/minute Motor power 1.5 kW Noise emission when idling 60 dB(A) Noise emission during working cycle 68 dB(A) Dimensions 1010 x 660 x 660 mm (H x W x D) Weight approx. 125 kg Possible uses: With this machine you can easily make your own packaging cushions from old cardboard. This is sustainable, environmentally friendly and saves you having to buy packaging cushions. The machine was used to recycle clean cardboard cutting residues from a cutting machine. As you can see in the photos marked in red, only the green packaging cushioning machine is for sale, without a cutting machine and without conveyor technology. Note: The aforementioned technical data was taken from the operating instructions, manufacturer brochures or other sources for which we cannot guarantee their accuracy and completeness. Scope of delivery: 1 piece packaging cushioning machine cp cushion pack, type CP 422 S2i/6 We would be pleased if this machine is of interest to you. Your Mertens & Frowein GmbH service team

Condition: like new (used), Mini Pak’r Air Cushion Machine The machine creates air-inflated fillings from the foil sleeve. 230V power supply Prjdpfx Adjw D E N Ejijd Weight about 6 kg.

Condition: used, Year of construction: 2012, Air Cushion Machine Fromm Airpad Machine Manufacturer: Brüninghaus Model: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Psdpfewulyljx Adisrd Dimensions (LxWxH): 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special features: • Stored programs for various cushion sizes • Program change at the push of a button • Individual production from 4 cm to 16 cm length with defined filling level possible • 10 programs available for storage of multiple parameters

Condition: used, Pressing screw REG-MAC Psdpfx Aoxgtd Hjdisrd for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw

Year of construction: 1997, condition: used, Double trough pre-pressing screw Trough approx. 2,800 x 660 mm Screw diameter approx. 370 mm Psdpfxotppmzs Adiord 2-cylinder solids pump SP 2180-400 with distribution station and 55 kW hydraulic unit

Year of construction: 2007, condition: used, cushion belt RAU, unit for crates 400 x 600mm, year: 2007, price: 4.850 Euro, contact: Mr. Rainer Eckerle Prodpfedhww Eox Adisd

Condition: used, For sale: Fromm AP500 Air Cushion Machine – For producing void fill material Very neat and well-functioning Fromm AP500 air cushion machine for sale. Ideal for producing air cushions as packaging void fill during shipping. This machine produces four cushions at once and automatically rolls up a supply. Once the roll is full, the machine stops automatically. Suitable for various airbag sizes. Prjdpfx Adoxn Tz Ueiod 🔧 Condition & operation The machine operates well. When starting up, the first few bags may be empty (presumably due to insufficient preheating). Once warmed up, it produces sturdy, well-filled cushions. This may be adjustable. 📦 Extras Film rolls available at additional cost Operating video available via WhatsApp Sold with invoice Price is excluding VAT 🔑 Keywords: Airpad, airbags, void fill, air cushion, air cushions, air bags, airpads, Fromm, Brüninghaus, AP500, AP502

Condition: used, Technical details: diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m Prsdpfx Aeu Nurfodijd draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 250 kg, Cross Slide – Support Type PS 30 Support suitable for hand-operated press machines with 300 mm center height Technical Data Longitudinal slide travel: 220 mm Cross slide travel: 120 mm Height: 230 mm Rotary table diameter: 200 mm Shear length: 550 mm Weight approx.: 250 kg Podpoxp Sd Refx Adijrd Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide - Large handwheels

Condition: excellent (used), Year of construction: 2023, Pressing Lines for automatic multi-(2-3)-layer parquet production. Pjdjggflcopfx Adierd

Condition: used, Double-column hydraulic press NEFF Type RHS 125 Z Hydraulic drawing press Machine No. 3973 Year of manufacture 1983 Pressing force: 125 tons Column gap: 1050 mm Lateral column clearance: 550 mm Table size: 1000 x 800 mm Ram size: 1000 x 800 mm Ram stroke: 350 mm Installation height max.: 750 mm Table height above floor: 960 mm Blankholder force: approx. 12 tons at 105 bar Blankholder stroke: 100 mm Through-hole in table: Ø 202 mm Rapid advance speed downwards: approx. 360 mm/sec Rapid advance speed upwards: approx. 360 mm/sec Working speed: approx. 36 mm/sec Oil tank capacity: approx. 1000 liters Podpfx Adoguvtleiord Main pump motor power: 22 kW Control pump motor power: 4 kW Control pump motor power: 2.2 kW Electrical connection: 400 Volt, 50 Hz - Hydraulic blankholder cushion underneath the table with a through-bore in the table top Ø 202 mm - Precise 4-column guide on the ram corners - Infinitely variable pressing force adjustment - Electrically adjustable fixed stop via hydraulic motor - Cutting shock damping - Two-hand control panel for stroke release on the press - Free-standing control cabinet (1600 x 500 mm) - Documentation such as operating instructions, electrical wiring diagram, and PLC program printout available Required space L x W x H: 2600 x 2400 x 4270 mm Weight: approx. 14 tons Good condition

Condition: like new (used), Year of construction: 2019, functionality: fully functional, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, Lightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoform plastics. Has only seen occasional light project use. Suitable, for example, for processing Corian sheets. An alternative to buying a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force across the entire work area: 44 tons 11 tons/m2 Maximum pressing height: 500 mm Pedoxz Rhfspfx Adierd ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLICS AND THERMOFORM PLASTICS • Heating by electric resistors and air circulation • Heated area: 3000 x 1500 mm • Max height of workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Digital temperature control from the control panel The unit's frame is made from welded thick steel beam structure and welded steel sheets. There is an insulation layer between the galvanized steel sheets of the oven’s inner and outer surfaces. Manual oven opening, guided rails, and transport wheels. Membrane press bed is phenolic-coated plywood featuring a grid pattern for improved vacuum distribution. The top section, where the membrane film is mounted, opens 45 degrees and is equipped with gas springs. Quick and easy upper section locking. Manual membrane film quick-mount system. Vacuum system with a single 25 m3/h vacuum pump. Control panel, installed on the left side of the machine, includes: • Main switch • Control voltage indicator lamp • Emergency Stop button • Temperature monitoring/control • Vacuum pump status light on/off • Heater status light on/off

Condition: good (used), Table with grinding device (edge delamination) and two integrated breaking strips. Width: 3700 mm Depth: 2430 mm Height: 970 mm Weight approx. 1500 kg Predpfxexnl Sfj Adiod

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 6052, Designed for corner crimping of aluminum profiles ("corner crimping machine"). Maximum profile height: up to approx. 140 mm. Maximum pressing height: up to approx. 100 mm. Press force: 56 kN per head. V-block (anvil) height: up to approx. 80 mm. Supplied with 3 standard sets of crimping tools (3 mm, 5 mm, 7 mm). Foot pedal controlled as standard. Pneumatic pressing (pneumatic press operation via leverage) with a working pressure of 6–8 bar. Prsdpfjxu U E Ijx Adisd

Condition: good (used), Year of construction: 2001, Extruding pressing line for soybean, Instapro, made in 2001, consisted of 2 extruders, 2 presses, original AMA automatic filtration for oil, and cooler for the cake. Predpsxuahbsfx Adiod Capacity is up to 1.200kg/h.

Year of construction: 1993, condition: excellent (used), machine/vehicle number: 32781, Size: 300 x 560 mm Speed: 44.000 c/h Pjdpfjhncafsx Adiord

Condition: good (used), pressing tool, sheet metal former, forming tool, ball forming tool Podevmx T Djpfx Adierd -Pressing tool: ball forming tool -Radius: 50.11 mm -Hole: Ø 40 mm -Dimensions: Ø 165 x 270 mm -Weight: 18.4 kg

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. Pjdpfx Aodzp S Redierd The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Pjdpfjw Anc Eox Adierd Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Year of construction: 2007, condition: good (used), functionality: fully functional, We are offering pressing line for rapeseed/sunflower with prepress (FS1000 55kw), final press (FS1000 45kw) and full automatic filtration for oil, 10m2. Psdpfx Adsxuafyoierd It is made for double cold pressing, which is low energy consuming and completely natural, providing the oil without necessity for degumming, because phosphorus content is low. After that full automatic filtration will remove cake residues from oil, which can be safely stored without any damage. Capacity of the line 1.400kg/h, 32t/24h

Condition: good (used), Crimping pliers, crimping pliers, cable lug pliers, mechanical crimping pliers, pressing jaws, pressing tool for cable end sleeves, wire end sleeves, cable lugs, hand crimping pliers, sleeve pliers, clamp sleeve pliers -Manufacturer: Klauke, hand crimping pliers type K05 -Crimping: of cable lugs and cable connectors Podpfx Adewup Efoisrd -Standard version: 6 - 50 mm -Dimensions: 390/140/H50 mm -Weight: 1.1 kg

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 100mm Glue: Danafix 446 Pedpfx Ajvw Eh Nsdijrd Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: good (used), Pressing pliers, pressing machine, pressing jaws, pressing tool -Manufacturer: Roller, press machine type 5788001 with accessories -Pressing pliers: size M15, M18, M22, M28 -Accessories: see photos -Dimensions case: 510/300/H120 mm -Weight: 11.7 kg Predpjvmha Tjfx Adijd

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Pjdpeg D Uuqefx Adijrd Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: good (used), pressing pliers, crimping pliers, cable lug pliers, hydraulic crimping pliers -Manufacturer: Orsta, hydraulic pressing tongs -Use: for large cable lugs -Hydraulic connection: see photo -Dimensions: Ø 118 x 315 mm Prjdpfx Asfnk I Ejdied -Weight: 11.2 kg