Notching sawing machine

PRESSTA-EISELE PRISMA 500

Condition: used, Year of construction: 2017, For processing aluminum and PVC profiles: * Miter cuts possible in 3 planes, also usable as a crosscut saw. * Manual adjustment of the horizontal saw blade, allowing it to be positioned up to 20 mm in front of the vertical blade. * Notching options: right-angled, single-sided bevel, double-sided bevel, triple-sided bevel. * Processing of profiles up to 300 mm wide at 90°, sharp miter cuts up to 30°, profile height 280 mm. * Notching depth: horizontal up to 185 mm, vertical up to 210 mm at 90°. * Notching width at 90°: 300 mm. Kodezrk Rbjpfx Aqisnb * Max. profile height 280 mm. * Swivel range of the saw blade vertically from 30° - 90° - 30° (front/center/rear) manually, positioning via a mechanical digital display. * Swivel range of the saw blade horizontally with the vertical saw blade 30° - 90° - 30°, manually, positioning via a mechanical digital display. * Material stop (tabletop) can be swivelled manually to the left and right from 30° - 90° - 30°, positioning via a scale. * Material depth stop is manually adjustable with a sliding carriage and hand clamp, positioning via a mechanical digital display.

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad Knjdpfx Aqsxabc Reieb no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. Ksdpfxjvtarno Aqisnb The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Max. latch height: 185 mm Knjdpox Ecg Ujfx Aqiob Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Kjdexu Nc Iepfx Aqisnb Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Ksdpfx Aovmz R Sjqionb Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one - High frequency motor (18000 rpm) - Right conveyor system (1 meter) Kedpfx Aoramz Hjqijnb

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Knedpfx Aqji E Trpoijb

Condition: like new (used), Year of construction: 2002, operating hours: 500 h, functionality: fully functional, max. grinding diameter 238 - 620 mm grinding length 190 mm workpiece length 380 - 940 mm spindle turning speed - stepless 2 - 12000 U/min current capacity 380 kVA power capacity - grinding motor 1,1 kW total power requirement 2,2 kW weight of the machine ca. 0,6 t !!! We have almost all spare parts for the Deckel S 11 machines in stock !!! !!! Accessories can be varied as desired !!! We would be happy to trade in your used Deckel S 11 - contact us! 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine like new !! * Accesories: * Sk ??40 dividing head with 24 R dividing disc * Graduated disc 20 R * Tightening screw M 16 69871 * Spiral and relief grinding device with rack housing * Counter bearing with 4 tailstock centres * Center point with driver * Dressing device * Dressing diamond * Radius grinding device SK 40 complete with setting gauge * Steel holder for ditto * Support fingers with sliding blades * Support finger holder * Complete dust extraction without suction * Halogen light * Tooth support complete Kjdpfx Aqsw U Eg Reionb * Setting gauge * Plier sleeve and jacking nut and wrench * 35 collets 1.0 - 18.0 mm increasing by 0.5 mm * 1 set of SK 40 direct collets 6, 8, 10, 12, 14, 16, 18, 2, 22, 25 mm * 6 jaw grinding chuck * 3 taper reducing sleeves Sk 40 x Mk 1, 2, 3, 4 * clamping nut * 20 grinding wheel chucks * 2 protective hoods * various diamond/borazon discs * Instruction Manual & Keys, Parts List, Wiring Diagram * Complete set of grinding instructions Machine is partially overhauled and with electrical acceptance report! !! Various measuring optics (new or used) with measuring cross sled available !!

Year of construction: 2012, condition: ready for operation (used), A Schüco profile work table is available for sash hardware installation. Installation capacity: approx. 6-8 sashes/day, hardware: Schüco AvanTec, min. pressure: 0.7MPa, max. air flow rate: 20l/min, machine weight: approx. 1200kg. On-site inspection is possible. Kjdpowwlk Nofx Aqijnb