Used Pressure Beam for sale (18,542)

Condition: used, tank capacity: 1,000 l, GENERAL Design: vertical Remarks: Vessel flange made of Fe; manway cover plated Speed: 48.5 / 97 RPM Internal diameter: 1,200 mm Total height: 3,750 mm Heating/cooling: available Power: 4.5 / 5.5 kW Max. allowable operating temperature: 149 °C Max. allowable operating overpressure: 6.0 bar Max. excess pressure: 0.50 bar Top head: removable / hinged top head Agitator: blade agitator Support design: feet Location: Bremen Jacket temperature control: half-pipe coil Nameplate: Vacuum: 1.00 bar Volume: 1,000 liters Jacket volume: 80.0 liters Cylinder wall thickness: 3.9 mm Jacket material: V2A 1.4301 (AISI 304) Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 850 mm Last application: chemical VESSEL Max. operating temperature vessel / °C: 143 °C Number of legs: 4 units HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: handhole Outlet (alternative entry): 85 mm Podpfx Aoxqbawodisrd MATERIAL SPECIFICATION Material legs: steel AGITATOR Agitator manufacturer: Ekato Voltage: 380 Volt Agitator positioning: centered in top head TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.3 mm Top head wall thickness: 5.1 mm

Condition: excellent (used), Pressure beam panel saw FIMAL CONCEPT 350 - used - Tiltable up to 46°, extendable angle stop up to 2,500 mm, digital display on the angle stop, mitre stop +/- 50°, automatic cutting length detection, stepless feed of the saw carriage, touchscreen, cutting line laser ----- Technical Data ----- Cutting length: 3,200 mm, Predpfx Aexdl N Aodisd Cutting width: 1,300 mm, Max. cutting height: 100 mm, Saw unit feed rate max.: 0 - 40 m/min., Main saw motor output: 5 kW, Main saw blade Ø: 350 mm, Dust extraction port (bottom) Ø: 120 mm, Dust extraction port (pressure beam) Ø: 100 mm, Compressed air connection: 7 bar Quality Info: - complete basic inspection - complete basic cleaning - electrics checked - immediately operational

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers Pedpfx Adotxirfeierd for 3 m sliding carriage

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Uninterruptible power supply (UPS) EASY-PLAN – Dongle version Prjdpsxlthpofx Adisd OPTI-CUT – Machine software Opti Pro – Office optimization software

Condition: used, tank capacity: 3,860 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Support ring, Fe; manhole cover incomplete (see photos) Speed: 61 RPM Outer diameter: 2,090 mm Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: present Insulation: present Power: 4 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: paddle agitator Base type: ring Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Predpfx Aexqaxledijd Max. permissible operating vacuum double jacket / pipe chamber / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminum FEATURES Manhole / dome: on the top head (DN 600) Outlet: present Remark: dents on the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 Volt Agitator arrangement: centrally mounted on top head Agitator specification: gearbox housing slightly damaged in one area (see photos) TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Top wall thickness: 8.14 mm

Condition: excellent (used), Pressure beam saw HOLZ-HER 6210 CUT 85 -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, feed rollers, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,250 mm, cutting width: 4,250 mm, max. cutting height: 85 mm, number of clamping claws: 7 pcs, number of trim stops: 3 pcs, main saw motor power: 11 kW, scorer motor power: 2.2 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, extraction nozzle Ø bottom: 140 mm, extraction nozzle Ø at pressure beam: 2 x 120 mm, compressed air connection: min. 6 bar Quality information: Prjdpfx Adjwz Rkceiod - Saw spindle newly mounted - Scoring unit newly mounted - Complete basic inspection - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Crane lugs Design: suspended Prjdoxqaw Iepfx Adied Remarks: 4 feet made of V2A; manway cover fastening bolts incomplete; 1 former connection in the top head was welded shut by the previous operator Internal diameter: 1,390 mm Overall height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator type: paddle agitator Agitator mounting: agitator flange Base type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last intended use: chemicals VESSEL Max. operating temperature vessel / °C: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in upper head (DN 500) Outlet: flange DN50 Note: light residues, motor/gearbox missing MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Agitator manufacturer: Ekato Baffle: Agitator arrangement: eccentric in top head AGITATOR 2 Agitator arrangement: side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.6 mm

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Ball valve Design: Suspended Remarks: Top cover made of V2A (1.4301); 4 support lugs made of Fe; Slight material erosion inside the tank Prsdpfsxqawuex Adijd Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: removable / hinged Agitator: beam agitator Stand design: support lugs Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Product-contacting material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: chemicals HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in top cover (Ø 450) Outlet: DN40 DIN 11851 Note: slight residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: steel AGITATOR Agitator manufacturer: Fluid Agitator position: centrally in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Top cover wall thickness: 4.5 mm

Condition: used, tank capacity: 550 l, GENERAL INFORMATION Design: Vertical Outer diameter: 890 mm Inner diameter: 650 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Max. allowable operating temperature: 135 °C Max. allowable operating overpressure: 2.0 bar Max. overpressure: 3.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Feet Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 550 liters Double jacket volume: 67.0 liters Podpsxqaqnsfx Adijrd Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical TANK Max. operating temperature of tank / °C: 135 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: Double jacket INSULATION Insulation jacket: Hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Outlet: DN40 DIN 11851 MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: Stainless steel AGITATOR Flow breaker: Agitator arrangement: Centered in the top head Agitator details: Agitator data not legible

Condition: used, tank capacity: 19,600 l, GENERAL Equipment: Spray head, crane lugs Design: upright Remarks: Presumably 3 cooling coils around the cylinder; heating connections have been cut off; one former manway in the lower cylinder area was welded shut by the previous operator; feet were cut off during tank removal and are supplied loose (with minor dents; see photos) External diameter: 2,900 mm Internal diameter: 2,700 mm Overall height: 5,000 mm Heating/cooling: available Insulation: available Max. overpressure: 3.0 bar Agitator: blade agitator Support design: adjustable feet Location: Bremen Nameplate: Vacuum: 0.9 bar Volume: 19,600 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,900 mm Previous use: dairy TANK Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket Pjdpfxexqante Adijrd INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top cover (DN 500) Discharge: present Discharge (alternative entry): 65 mm Note: Pressure marks on the insulation jacket, discharge end cut off MATERIAL CHARACTERISTICS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator manufacturer: Stelzer Bottom bearing: Agitator arrangement: offset in top cover Agitator equipment: Agitator data not readable; motor/gear unit with signs of corrosion

Condition: used, tank capacity: 5,530 l, GENERAL INFORMATION Equipment: spray head, crane lugs Design: vertical Remarks: Double jacket probably with sprinkling ring – suitable only for non-pressurized temperature control; welding of the double jacket in the upper area has partially come loose; outlet diameter 65 mm (tapering to approx. 50 mm towards the tank); small dents inside the tank; heating connections cut off Speed: 15.5 / 31 rpm External diameter: 1,660 mm Internal diameter: 1,550 mm Total height: 4,350 mm Heating/cooling: available Power: 0.8 / 1.6 kW Max. pressure: 3.2 bar Agitator: paddle agitator Support design: height-adjustable legs Location: Bremen Cylinder tempering: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,530 liters Product contact material: V2A 1.4301 (AISI 304) Condition: used Cylindrical height: 2,500 mm Last application: dairy TANK Max. operating temperature / °C: 145°C Number of legs: 4 HEATING/COOLING JACKET Prodoxqamcjpfx Adisd Underside tempering: double jacket FEATURES Manway / dome: on top (Ø 450 mm) Outlet: available Note: outlet pipe cut off MATERIAL SPECIFICATION Material tempering system: V2A 1.4301 (AISI 304) Material legs: stainless steel AGITATOR Voltage: 380 Volt Bottom bearing: Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 5,650 l, GENERAL Equipment: Crane lugs Design: Suspended Comments: Lugs made of Fe; insulation jacket partially detached in the area of the lower bottom (see photos) Speed: 55.8 rpm Outer diameter: 2,100 mm Inner diameter: 1,800 mm Ex-protected: Motor is ex-protected (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 3,750 mm Heating/cooling: available Insulation: available Power: 2 kW Max. allowable operating temperature: 200 °C Max. allowable operating overpressure: 6.0 bar Max. overpressure: 3.2 bar Mechanical seal: Mechanical shaft seal with thermosyphon vessel Agitator: Beam agitator Support design: Lug mounting Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,650 litres Double jacket volume: 166.0 litres Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: Pharmaceutical chemistry TANK Max. operating temperature tank / °C: 200 °C Number of feet: 4 pcs HEATING/COOLING JACKET Lower bottom temperature control: Half-pipe coil INSULATION Insulation jacket: bolted Insulation material: PU foam Insulation jacket material: Galvanised steel EQUIPMENT Pedpfxoxqah Ho Adisrd Manway / dome: in top head (DN 500) Outlet (alternative entry): 140 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: centred in top head Agitator equipment: Mounts for flow breakers inside the vessel (flat plates of the flow breakers not present; see photos)

Condition: used, tank capacity: 1,500 l, GENERAL Design: vertical Heating/cooling: available Insulation: available Max. allowable operating temperature: 145 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.5 bar Agitator: beam agitator Base design: feet Location: outdoor storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: milk Pjdjxqahyjpfx Adisrd VESSEL Max. operating temperature of vessel / °C: 145 °C EQUIPMENT Manhole/dome: in the top Outlet: available

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. Prjdpfotrdyrox Adiod The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Prjdpfjfz Dvvsx Adiod

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Podefz Ax Sspfx Adiord Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Prsdpfx Adoflpmqoisd User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Psdpfx Ajfzrapodierd The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Psdsfz A D Nopfx Adijrd The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Pedpfsxyxk Eox Adijrd

Condition: good (used), Year of construction: 1988, Ja Podpferyaqyox Adisrd Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release. The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Predpfoxxycyjx Adiod Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: used, Reportedly unused Eurovent Calmic model 45-S-19 hastelloy C22 contact parts pressure leaf filter. Has (19) 450 mm (18") diameter horizontal shallow plates. 2.6 square meter (28 square foot) filtration area and 65 litre (2.3 cubic foot) cake space. Has stainless steel vertical tank with clamped dished top head. Internal rated full vacuum/6 bar (87 psi) design pressure at -29 to 175°C design temperature. Mounted on (3) legs on forkliftable base. Predpfjxw Tcdox Adiod

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. Pedpfsxxx Ubsx Adierd - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: used, This listing is for 1 of 4 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. Pedpfx Adoxxx Tqjierd The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations