Used Pressure Former for sale (14,601)

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Todpstrdyrsfx Adljf Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Tjdpfx Adjfz Dvveljf The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Tjdpjfz Ax Ssfx Adlef Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Tjdjflpmqepfx Adlof ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. Tjdofzrapepfx Adlsf ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Tsdpfofz A D Nex Adlsf • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, Used Schenk model ZHF-S70-Z-C3 stainless steel pressure leaf filter. Unit measures approximately 2400mm straight side X 1350mm diameter. Has (60) 1200mm diameter horizontal filter/scavenge elements on 30mm spacing. Total approximately 70 square meter filtration area with approximately 1850 litre cake capacity. Filter elements bottom driven by a Hydrokraft model PVG 130-ES/11 hydraulic drive with a 37 kW, 415 volt, 1400 rpm, 3 phase, 50 HZ motor. Unit has an approximately 200mm slurry outlet. Welded dished bottom and clamped dished top head. Approximately 4300 litre capacity rated 9 bar design pressure at 20°C. Material of construction 321/304 stainless steel. Mounted on (3) legs. Also includes a 3000 litre 304 stainless steel Kieselguhr discharge tank rated 0.5 bar at 20°C. And a Kieselguhr Dosing tank with a 2-tier 2-blade pitched paddle type agitator driven by a 1.1 kW motor. Dosing tank includes feed pump driven by a 1.4/1.8 kW, 415 volt, 1410/2870 rpm, 3 phase variable speed motor. Tjdpfoxyxk Eex Adlsf

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release. The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. Tjdpfx Ajxxycyjdlsf - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: excellent (used), Pneumatic pressure switch -Type: MDR2/11 -Number: 7x pneumatic pressure switches available -Price: per piece -Weight: 0.3 kg Tedpfxsb A Sv Se Adljf

Condition: used, tank capacity: 32,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Cylinder manhole diameter 500 mm (most of the manhole cover bolts are missing); on one tank, one foot, and on the other, two feet are dented into the bottom head (on this tank, one nozzle is also dented into the top head and the heating coil is indented at one spot); the dented feet must be repaired on-site before reinstallation of the tanks; external insulation rings made of Fe (partially slightly damaged); one tank has a flanged reduction at the outlet (inner pipe diameter approx. 55 mm); see photos Internal diameter: 2,400 mm Todjxqb E Hjpfx Adlof Overall height: 9,050 mm Heating/cooling: available Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Support type: feet Location: Bremen Technical documentation: drawing, acceptance certificate Nameplate: Vacuum: 1.0 bar Volume: 32,000 liters Double jacket volume: 80.0 liters Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 6,970 mm Previous use: Chemicals TANK Max. operating temperature / °C: 200 °C Number of feet: 4 pieces HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in cylinder, in upper head (DN 500) Outlet (alternative entry): 100 mm Note: slight residues, manhole covers clad MATERIAL SPECIFICATIONS Temperature control system material: V4A 1.4571 (AISI316) Feet material: steel TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm

Condition: like new (used), 4100 litres. New, 2 units Todpfx Adoxz Hxgjljf

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Todpjvlz Arjfx Adlof Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Reportedly unused Eurovent Calmic model 45-S-19 hastelloy C22 contact parts pressure leaf filter. Has (19) 450 mm (18") diameter horizontal shallow plates. 2.6 square meter (28 square foot) filtration area and 65 litre (2.3 cubic foot) cake space. Has stainless steel vertical tank with clamped dished top head. Internal rated full vacuum/6 bar (87 psi) design pressure at -29 to 175°C design temperature. Mounted on (3) legs on forkliftable base. Tedpfx Aexw Tcdedljf

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: Tjdpjxxx Ubjfx Adlef - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: excellent (used), mileage: 312,116 km, power: 265 kW (360.30 HP), first registration: 05/2010, fuel type: diesel, axle configuration: 6x4, fuel: diesel, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro4, suspension: steel, loading space volume: 15 m³, Year of construction: 2010, Equipment: ABS, air conditioning, differential lock, = Other Options and Accessories = - Leaf spring suspension - Brake booster - Differential lock - Electric windows - Enclosed cabin - Speed limiter - Refrigerator - Air-suspended seats - Sleeper cab - Sun visor - Toolbox = Notes = MAN TGS 33.360, 6x4, vacuum and high-pressure truck, tipper tank, manual gearbox, steel suspension, Wittig pump RFW 200, high-pressure pump Pratisolli K32, Belgian registration, good working condition = Further Information = Technical Information Tedpfx Adjxyvzzolef Number of cylinders: 6 Drivetrain Fuel tank capacity: 15,000 liters Transmission Transmission: ZF, 16-speed, manual gearbox Axle configuration Suspension: Leaf springs Front axle: Steering; tire tread left: 70%; tire tread right: 70% Rear axle 1: Dual tires; differential lock; inner left tire tread: 40%; outer left tire tread: 40%; inner right tire tread: 40%; outer right tire tread: 40%; reduction: hub-reduction axles Rear axle 2: Dual tires; differential lock; inner left tire tread: 30%; outer left tire tread: 30%; inner right tire tread: 30%; outer right tire tread: 30%; reduction: hub-reduction axles Weights Unladen weight: 16,660 kg Payload: 16,340 kg Gross vehicle weight: 33,000 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Gerrit Haverhoek for more information.

Condition: used, tank capacity: 1,350 l, GENERAL Design: suspended Remarks: Various technical documents available; the tank was previously suspended by the former operator in a ring with load cells, which was embedded in the floor (one ring per tank is included in the scope of delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Total height: 2,650 mm Heating/Cooling: available Tjdpoxxiccofx Adlef Insulation: available Power: 0.75 kW Max. permissible operating temperature: 140 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Previous application: Pharmaceutical TANK Max. operating temperature (tank) / °C: 130 °C HEATING/COOLING JACKET Max. permissible operating underpressure (jacket/pipe zone) / bar: 1.0 bar Base heating: Half-pipe coil INSULATION Insulation material: Mineral wool EQUIPMENT Manway/Dome: on top head Outlet: available Outlet (alternative): 50 mm MATERIAL PROPERTIES Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: MAVAG AG Voltage: 230/400 Volt Agitator arrangement: Bottom-mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: good (used), Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 1x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc. Tedpeiq Th Sefx Adlsf

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Type: RKD-125 ID No.: 180467 / D2950 Year of manufacture: approx. 2010 Tjdpfx Adoxxmf Uelof Jaw width, step jaws: 125 mm Jaw height, step jaws: 40 mm Jaw width, attachment jaws: 135 mm Jaw height, attachment jaws: 49 mm Machine vice base width: 126 mm Opening width, max.: 141 mm per side (only with step jaws, without attachment jaws) Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 stages from 1 to 4 tons - 2 clamping functions: single clamping with dummy and double clamping - Various clamping ranges via 3 guide grooves in each base jaw - Step jaws (reversible) - Stable base body, ground on all sides - Can be mounted horizontally, vertically and laterally - Center jaw dimensions (L x W x H): 125 x 40 x 40 mm - Attachment jaw dimensions (L x W x H): 135 x 20 x 49 mm Dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 46/2020 1666344-4, Multistage vertical centrifugal pump for pressure boosting and water treatment Todpfxjxz Sb Hj Adlef Technical data as per nameplate image The unit is still in its original packaging, including manuals.

Condition: used, This listing is for 1 of 4 Parker SciLog SciPres Pressure Monitor with Pressure Sensors The unit is in full working condition and is ready for immediate release. This Unit is Supplied with Scilog Scipress pressure sensorsand cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Tjdpfxjxxx Tqs Adlef Key Features: - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations

Condition: excellent (used), - 4 heads with Fastron computer - 1 unit in stock - Used model - Refurbished equipment: the equipment is prepared when ordered, pickup and return dates are agreed upon at that time (please request the price after refurbishment). Todpfx Aowyby Sedlef

Year of construction: 2012, condition: excellent (used), Stationary high pressure pump unit Hammelmann HDP 47 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 477 Working pressure: 300 bar Delivery rate: 24 l/min. Tsdpfx Adjh Uc Nkjljf Drive speed: 1500 rpm. Drive power: 14 kW with AC motors ACM 160L-4/HE 3~ IP55 15kW electric motor, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: approx. 1.100x750x1.200 mm Weight: approx. 570 kg Year of manufacture: 2012 Condition: In very good used condition.

Condition: excellent (used), Year of construction: 2016, Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump, pressure booster pump, pressure intensifier pump, high-pressure centrifugal pump, vertical pump -Condition: unused -Manufacturer: E-Tech Franklin Electric, Vertical pump type EV15/05 FII040 T E1 IE3 Tjdpfx Adoxt Epbslsf -Motor: AEG 4.0 kW -Flow rate: 8 - 24 m³/h -Pumping height: 28.3 - 72.5 m -pmax: 25 bar/120°C -Pipe connection Ø 50 mm see photos -Dimensions: 300/250/H870 mm -Weight: 52.8 kg.

Condition: good (used), mileage: 472,700 km, power: 234 kW (318.15 HP), first registration: 01/1990, fuel type: diesel, color: yellow, axle configuration: 4x2, fuel: diesel, wheelbase: 4,400 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space volume: 12 m³, Year of construction: 1990, = Additional options and accessories = - PTO (Power Take-Off) Todpfjxzr N Dex Adljf = Further information = Applications: cleaning, land drainage, drainage and recycling Suspension: leaf spring Front axle: Max. axle load: 8,000 kg; Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Twin tyres; Max. axle load: 13,000 kg; Tyre tread left inner: 80%; Tyre tread left outer: 80%; Tyre tread right inner: 80%; Tyre tread right outer: 80% Technical condition: good Visual condition: average

Condition: good (used), centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h Tsdpfx Ajb A Syusdlef -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg