5
Make AZO GmbH & Co KG (D), Type D128/D350xD500, No. 1244149-01, Year of construction 2015, Material Stainless steel, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines ...
6
2
Manufacturer Italy
Condition: good, after GO, calibration certificate for the device is from 12/2018
control system Metrosoft CM 3.9
Measuring range: Travel X-axis 1200 x Y-axis 1500 x Z-axis: 700 mm
Btmd9nwgy
Sensing system:
Sensor head: PH10M
Extension 0 mm
Sensor type: TP20
Sensor no. 6L3642
Contact Diameter 6.0
Contact length 25 mm
1
6
Thermo Scientific Supplement Bottle Turning Device.
Bymlzqzg
4
Make AZO GmbH & Co KG (D), Type D80XD100/D350, No. 1244152-01, Year of construction 2015, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlan...
9
2
Manufacturer Switzerland REGLOPLAS
Bp9prakatp
Condition new, only tested, not used
for sale 2 pieces
type: P140smart 8 / SM22 / 1 K / RT7
temperature: up to 140 ° C
1
Categories: Engine ControlPart number: 10326409Vehicle(s): R964CStock number: 9000802In stock: 2Warranty: 1 monthCondition: UsedBrand: LiebherrLocation: ZT1-05-03
Qvtmz3dp
5
Make AZO GmbH & Co KG (D), Type D100/D350, No. 1098984, Year of construction 2012, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Vis...
2
1
Categories: Engine ControlPart number: 9079215Vehicle(s): D934SStock number: 8000531In stock: 1Warranty: 1 monthBrand: LiebherrLocation: ZT3-05-03
Cbhqou8m
5
Make AZO GmbH & Co KG, Type D128/D350, No. 1097198, Year of construction 2012, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit o...
2
1
Categories: Engine parts, Control, ComputerPart number: 10127001Vehicle(s): D934Stock number: 8000222In stock: 1Warranty: 1 monthCondition: UsedBrand: LiebherrLocation: ZT3-05-02
Dh22otdla
5
Make AZO GmbH & Co KG (D), Type D100/D350, No. 1098984, Year of construction 2012, Material Stainless steel, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barne...
1
Categories: Engine ControlPart number: 10326409Vehicle(s): R964CStock number: 9000802In stock: 2Warranty: 1 monthCondition: UsedBrand: LiebherrLocation: ZT1-05-03
Qok8ex2d
5
Make AZO GmbH & Co KG (D), Type D128/D350, No. 1097198, Year of construction 2012, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Vis...
5
Make AZO GmbH & Co KG (D), Type D128/D350, No. 1097198, Year of construction 2012, Material Stainless steel, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barne...
5
Make AZO GmbH & Co KG (D), Type D100/D350, No. 1098984, Year of construction 2012, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Vis...
5
Make AZO GmbH & Co KG (D), Type D100/D350 , No. 1098984, Year of construction 2012, Floorspace 1,0x0,8 M, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Vi...
5
Make AZO GmbH & Co KG (D), Type D128/D350, No. 1097198, Year of construction 2012, Material Stainless steel, Floorspace 1,0x0,8, Total height 0,6 M, Weight 100 Kg, Extra Specifications This docking device creates a connection with low dust levels between two system components What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneve...
6
Nail series: 34° paper magazineed strip nails
Wire diameter: 3.8 - 4.6 mm
Nail lengths: 100 - 160 mm
Bfeqbk8j0l
Working pressure: 5 - 8 bar
Weight: 7.10 kg
Magazine capacity: 72 nails
5
Quick release device, quick release, quick release vice, drilling device, machine vise, drill vise, clamping sleeve, collet
-Part head
-different pitches
-Tensioning sleeve: Ø mm
-Dimensions: 230/210/H120 mm
Rtbxdsebo
-Weight: 9 kg
3
swing dia. over long. slide mm
spindle turning speed range U/min
diamond disc diameter mm
total power requirement 1,5 kW
Weight kg
max. width of grinding wheel 50 mm
ratio 0
max. dia. of grinding wheel 400 mm
weight of the machine ca. 0,35 t
dimensions of the machine ca. 1x1x1,3 m
Benjj9tkgf
Pre-Dressing Device for Gear Grinding Wheels
10
Whirling device
Manufacturer Burgsmüller & Söhne
type L3
with lots of accessories
Device was on a lathe VDF Heidenreich & Harbeck M630 ( see our offers )
Bqpe83e30a
4
centre height 130 mm
spindle bore 18 mm
ratio 40:1
swivellable - 10° bis 90° °
groove width 16 / 18 mm
weight 28 kg
dimensions of the machine ca. 0,5 x 0,25 x 0,25 m
Unused semi-universal dividing set:
- Spindle in precision tapered roller bearings
B8cxybak
- Phosphor bronze worm wheel, helix Cr-NI steel, hardened and ground
- Translation disengageable for direct sharing
- each division 2 to 50 and many divisions to 380
accessories:
Tailstock, 2 part washers, centering point, driver and chuc...
15
Technical data baler:
Manufacturer Strautmann
Typ BaleTainer
Year of construction 2012
Press power main press 60 tons
Surface pressing capacity 156 t/m²
Feed channel 2,815 x 1,085 x 2,250 mm (l x w x h)
Bale size 1,100 x 1,100 x 700 mm (w x d x h)
Driving motor 5,5 kW
Connected load 13 kW
Fuse 32 A, plug CEE 32 A
Tying system 4-fold vertical, fully automatic
Bale weight up to 400 kg
Volume hydraulic oil tank 90 l
SPS controller (manuf., type)Siemens S7-1200
Operating panel (manuf., type) Siemen...
6
Back grinding machine JUNG type HA 20
GeräteNr: 3344
Profile depth: Max 15 mm
Angle: 0 ° to 2°
Magnetic disk: 115 x 115 mm
Clamping range: 110 x 75 mm
Magnetic plate height: 119 mm
Workpiece dimensions L x W x H: up to 60 x 100 x 50 mm
Bdesf9jmjt
Current draw: 1 amp
Operating voltage: 24-volt DC voltage (VDC)
-mechanically shiftable permanent magnet
Dimensions L x W x H: 500 x 200 x 125 mm
Weight: 25 kg
good condition
Suitable in the cutting tool mould for tapered relief cut plates or shapes in...
5
Built-in measuring device, built-in measuring instruments, measuring mechanism, moving-coil instruments, moving-coil measuring mechanism, temperature measuring device, control panel, temperature measuring device, single and multi-color point recorder
-Manufacturer: Jumo, single and multi-color dot pens
Blc7el8slm
-Type: PS1d-44 / / D92.160 / 161
-Dimensions: 265/145 / H145 mm
-Weight: 3 kg
6
Dimensions (L/W/H) L600 x B500 x T295 mm
capacity 300 W
electr. connected load 230 - 240, 50 V/ Hz
Bpvfdxwsgz
*** Special Offer ***
*** Changes and errors in the technical data and specifications as well
Subject to prior sale!***
2
FeederBuilt 2008new with 4 rollsRoll diameter 120 mmRoll width 2 x 25 mmSpeed 2-17 m/minMotor 0,56 kW / 400 VWeight 91 kgAvailability: short termStorage location: Hochheim
Ikv2tbgs3
3
length 800 mm
width 500 mm
height 1000 mm
power capacity kW
Biugubaa3v
weight of the machine ca. 0,3 t
dimensions of the machine ca. m
2 units
15
Technical data baler
Manufacturer Presto GmbH & Co. KG
Typ CC 40 V
Year of construction 2012
Hours of operation 6,924 hours
Press power main press 40 tons
Specific press capacity 48,5 N/cm²
Feed channel 1,080 x 1,100 mm
Capacity per cycle time 0,85 m³
Theoretic cycle time 34 sec.
Theoretic throughput rate 90 m³/hour
Throughput capacity under operating conditions 72 m³/hour
Sound pressure level in operation (LpA) 65 dB
Bale size 750 x 1,100 mm
Bale weight up to 400 kg, depending on material
Driv...
2
Spreading and pressing device with hydraulic power unit WEBER type E45 / 59600.0
Hydraulic spreading tongs, hydraulic spreader
year of construction 1988 / 1986
Hydraulic power pack type E45 / 59600.0
operating pressure max. 630 bar
Delivery rate approx. 2 l/min
Tank capacity approx. 10 litres
Spreader - Pliers WEBER Type SP30 / 059 198.0
Throat = arm length 340 mm
Spreading distance max. 810 mm
Spreading force in the working area max. 132 kN
Clamping force 99 kN
- Double hose with plug connectio...
5
Addressing device
-Manufacturer: IFM
-Product type: AC1144
Rt3lou8k0
-Weight: 0.3 kg
6
length: 750 mm
height: 800 mm
welding current: 120
total power requirement: kW
machine weight ab.: 180 kg
dimensions L x W x H: Schweißgerät: 0,75 x 0,52 x 0,8 m
dimensions L x W x H: Kompressor: 1,2 x 0,5 x 0,9 m
Welding device with piston compressor
welding device: Make Jäckle
- cutting capacity 30 kVA
- TIG / E-welding
- welding device : cooling type F
- with burner package 6m
- with earth cable 12m
piston compressor: make: Schneider Typ Universal 650-60D, YOM: 1993
- filling capacity 500 Li...
5
tool adaptor:HSK-A 100 69893
Bekxlmiftf
turning speeds:1500 -. 7500 U/min
Torque:160 - 32
output:25 kw
current:92/46 A
required cooling water:12 l/min
bore diameter:112 Sitz/Baugrösse mm
:DMS 112 AL .4.FFS
weight of the machine ca.:0,5 t
dimensions of the machine ca.:120 x 0,42 x 0,37 m
AC motor - spindle milling spindle in good condition
water cooled
6 spindles are available; price per spindle
HSK 100
2
Feeding device
Year of construction: 2016
New device
3 feed rollers
Roll diameter 120 mm
Roll width 60 mm
8 speeds
Ohgxl
Motor 0,75 kW/400 V
Weight approx. 65 kg
availability: short term
Storage location: Hochheim
1
length 250 mm
width 170 mm
height 250 mm
groove width 18 mm
weight of the machine ca. 29 kg
Cgo80imo
dimensions of the machine ca. 250 x 170 x 250 mm
5
Plasma cutter TELWIN type plasma arc 65/1
Masch. No. 10048-88 C year of production 1988
Performance 60 amp. = 40% ED
45 amp. = 60% ED
32 amp. = 100% ED
Bc9u3vhdf0
Setting range 3 levels
Schlauchpacketlänge approx. 4.5 m
Compressed air connection approx. 6 bar
Power supply 380 Volt, 50 Hz 32 amp. Plug
Dimensions L x W x H 550 x 540 x 910 mm
Weight 90 kg
good condition
5
Measuring device for speed or frequency
-Type: 0516 4750
-Dimensions: 420/320/H90 mm
Evk2qead
-Weight: 3 kg
5
working surface 3000 x 1700 mm
milling spindle Perske
turning speeds 23600 U/min
distance spindle /table 75 mm
Control Letra Studio
Euroline Typ 255-50 W
cylinder head volume 255 l/min
liter capacity 165 l/min
pressure max. 10 bar
Bngxfoxw
container volume 50 l
operating speed max. 2850 Upm
total power requirement 1,85 kW
weight of the machine ca. 2,5 t
control programm devices
milling drills 8-10 pcs
6
Marking device for folding machine DESTA ZM 900
Year - - Serial-No. 529
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be tes
Cjnx80gm
5
length:1000 mm
width:1000 mm
height:2000 mm
number of T-slots:13
T-slot - width:22 mm
Nsvlx
thickness of clamping area:85 mm
Thickness:90 mm
weight of the machine ca.:2,0 t
6
Water mixer and dosing device
Model: SE 42
- Fast and easy operation
- Housing made of stainless steel
- Digital display of temperature and amount of water
0k9xljmt
- The amount of water can be dosed
- Recommended water pressure 2-4 bar
- power 25W
- Adjustable temperature 0/40 ° C
- water flow 180 / 2500L
- 220 / 230V - 50 / 60Hz
Used device
Come to our Milbrandt Store and take a look at over 400 bakery machines in the large warehouse!
6
Vibratory feeder / sorting device / spiral conveyor BÖLLHOFF
Vibrating pot, sorting device / screw feeding with vibratory feeder for screwdriving technology
Type: UAH-25-EV / UFA 250 Series: Uniquick Advance
machine No.: 6032924 Year of construction: 2009
Cup diameter: 250 mm
inner pot height: 65 mm
Sorting track width: 8 mm (V-rail)
Operating pressure: 6,5 bar
Power supply: 230 Volt, 50 Hz.
Control voltage of the pneumatic valves: 24 Volt
- Control device for infinitely variable vibration speed...
5
Inert gas welding device, inert gas device, welding rectifier
-without wire feed
-Max. Welding power: 350 A
-Dimensions: 700/600/H1400 mm
S0yknsea3
-Weight: 62 kg