Used Pressure Cooker for sale (15,455)

Condition: excellent (used), Pressure sensor, pressure transmitter, pressure transducer, pressure switch, pressure transducer -Manufacturer: Siemens unused original packaging -Type; QBBE2002-P16 -Pressure sensor range: 0...16 bar -Protection class: IP 65 -Thread: G 1/2" -Operating voltage: 24 VAC 18....33 DC -Power consumption: < 2 mA Godepam Akspfx Ad Rsui -Quantity: 1 piece available -Carton dimensions: 130 x 80 x 70 mm -Weight: 0.3 kg

Condition: good (used), Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump Gusdodzrykepfx Ad Rei -Drive: 1.5 kW 2910 rpm -Max. flow rate: 23.6 m³/h -Max. pressure: bar Maximum temperature: 100 °C Quantity: 1 piece available -Dimensions: 250/300/H755 mm -Weight: 60 kg

Condition: used, High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg Gujdpedwlp Sofx Ad Rji

Year of construction: 2011, condition: used, Hydronic system, hydraulic station, membrane expansion vessel, compressed air tank, pressure vessel, pressure tank, compressed air tank, pressure tank, -electric heating -Manufacturer: Schniewindt -Type: 97/DF 15 -Power: 15 kW -Connection: DN30 in stainless steel -permissible operating pressure: -centrifugal pump -Manufacturer: Tamel 2.2 kW -Number: 2x systems available -Price: per piece -Dimensions cabinet: 940/740/H1870 mm Gusdpfed Dvgpex Ad Rei -Weight: 406 kg

Condition: good (used), High-pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower -Engine power: 0.12 kW Godped D Ri Njfx Ad Reui -Speed: 2780 rpm -Volume output: 252 m³/h -Pressure increase: 240 Pa -Inlet connection: Ø 142 mm -Output connection: 56 x 52 mm -Quantity: 1x blower available Price: per piece -Dimensions: 270/180/H160 mm -Weight: 4.8 kg

Condition: used, High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm Gjdpfx Aod Ep Uped Reui -Dimensions: 465/325/H230 mm -Weight: 11 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, pressure amplifier pump Godpfx Ajt E D N Red Roui -Manufacturer: KSB, high pressure pump type Movichrom CN 9/2 PN25 CN1 -Drive: 1.1 kW -Speed: 2900 rpm -max. flow rate: 9 m³/h -max. discharge head: 22 m -Dimensions: 280/250/H540mm -Weight: 43 kg

Year of construction: 1994, condition: used, Pressure blower, radial fan, high pressure radial fan, dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, extraction blower, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower -Manufacturer: VEB ILKA, radial fan extraction fan -Type: IRHMF160 / 2 see photo type plate -Engine power: 3.4 kW / 2900 rpm -Volume flow: 0.242 - 0.694 m³/s -Inlet: Ø 160 mm -Connection output: 250 x 160 mm -Fan wheel: Ø 500 mm -Dimensions: 780/490/H1030mm -Weight: 88kg Guodpfxsuncxie Ad Rei

Condition: good (used), pressure monitor, pressure switch, pressure regulator, gas pressure regulator, dial air regulator -Manufacturer: Wilkerson, pressure regulator Dial-Air-Regulator -Type: R21-C4-L00 B -Control range: 0-3 bar / 0-40 psi -Inlet pressure: max. 21 bar / 300 psi -Dimensions: 81/68/H103 mm Gsdpevy Enujfx Ad Rjui -Weight: 0.9 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Gujdpfx Ajwc Afhsd Rsi Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling Gedpfx Aowc Ri Ijd Rjui 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption Gsdpfxewc Rk Es Ad Rjui One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2023, operating pressure: 1,000 bar, fuel: diesel, Kärcher HD 9/100 De Skid Advanced High pressure cleaner with up to 1000 bar This is an unused exhibition device! Current manufacturer RRP €80,000! The machine is being sold as a used machine with no return, guarantee or warranty. Net price €24,900 // Gross price €29,631 - Viewings possible! Gjdpfevz Aq Aox Ad Rjui - Shipping can be organized nationwide, costs €300 - We would be happy to have our leasing partner create an attractive leasing/financing offer for you!

Condition: good (used), Used, electrically heated pressure vessel with agitator Item number: 10256 Last application: Chemical industry Volume: 280 L Type: Floor-standing on legs Material (in contact with media): 1.4301 stainless steel Bottom: Klöpper bottom Top: Klöpper bottom with flange ring Operating pressure according to nameplate: +3 bar Operating temperature: Max. 90°C Dimensions of the vessel: Inner diameter: 560 mm Outer diameter: 580 mm Height of legs: 260 mm Gujdjd Dwi Hjpfx Ad Rei Distance from outlet to bottom: 365 mm Overall height: 1540 mm Materials: Inside: 1.4301 / AISI304 Outer parts: 1.4301 / AISI304 Equipment: Double jacket around the cylinder and bottom, electrically heated Agitator in the top, speed-adjustable Top completely removable Various connections Sight glass in the cylinder

Condition: good (used), Used stainless steel reactor with double jacket, insulation, and agitator 3 units available Article number: 10264 Last application: Chemical industry Volume: approx. 2000 L Operating pressure: +2 bar Type: Standing on legs Material (in contact with media): 1.4301 / AISI 304 Design: Double jacket and insulated Bottom: Klöpper bottom Top: Klöpper bottom, flanged Tank dimensions: Gujdjd Dym Njpfx Ad Rei Tank inner diameter: 1200 mm Cylindrical height: 1520 mm Overall height: approx. 2550 mm Leg height: 290 mm Outer diameter: 1400 mm Distance from outlet to bottom: 110 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Insulation Double jacket Top flanged Various connections on the top Dome cover on the top Agitator / propeller EKATO

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, ESTRELLA DN 1000 GLASS-LINED PRESSURE NUTSCHE FILTER High-quality pharmaceutical/chemical pressure nutsche filter manufactured by Estrella AG, Switzerland. Manufacturer: Estrella AG, Ettingen, Switzerland Year: 1994 Type: Pressure Nutsche Filter / Pressure Filter Diameter: DN 1000 Filter area: approx. 0.75 m² Material: Steel, highly acid-resistant, glass-lined Glass lining quality: ESTRELLA 2000 The unit is equipped with a heavy-duty hydraulic lifting and tilting system for opening the vessel. The hydraulic system is manually operated and integrated into the robust steel frame. Main equipment: - DN 1000 pressure nutsche filter Gjdpfxju U Afuj Ad Roui - Approx. 0.75 m² filtration area - Acid-resistant, glass-lined steel construction - ESTRELLA 2000 glass lining - Large, hydraulically lifted and tiltable top cover - Manual hydraulic pump - DN 1000 x 370 top cover - DN 1000 x 550 center section - DN 1000 x 370 bottom section - Filter / perforated plate - 2 x DN 100 connections with sight-glass fittings - 3 x DN 50 connections on top cover - DN 50 bottom connection - Additional fittings and pressure gauge - Heavy-duty steel support frame According to the original manufacturer documentation, the ESTRELLA 2000 glass lining was high-voltage tested for porosity in accordance with DIN ISO 2746. The glass-lined surfaces are visually in very good condition. The blue enamel lining shows a clean and well-preserved appearance. The machine originates from pharmaceutical production. Original Estrella documentation, drawings, and historical manufacturing documents are partially available. Further technical documentation is currently being located and will be supplied if available. The original purchase price in 1994 was CHF 59,218 net, excluding transport and taxes. Inspection of the unit is possible at our warehouse in Switzerland by appointment. CYCRON GmbH Switzerland

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VEB, Contact manometer 0 - 0.1 bar / 0-10 kp/cm² unused original packaging -Manometer: Type 1/BM 20/2 160Ø Gusdpfx Adjyfffzs Rei -Switch: 220V 30W 30VA -Number: 6x pressure gauges available -Price: per piece -Cardboard dimensions: 240/240/H125 mm -Weight: 0.9 kg/pc.

Condition: excellent (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low-pressure switch, pressure measuring device with contact device -Manufacturer: WIKA, pressure gauge with contact device 0 - 250 bar, unused, original packaging Godoyfl Upopfx Ad Roui -Manometer: Type 212.20.160 Kont 821.1 -Connection: G1/G2 -Quantity: 1x pressure gauge available -Cardboard dimensions: 240/240/H190 mm -Weight: 1.5 kg

Condition: excellent (used), Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester, barometer -Manufacturer: HG, Manometer 0 - 0.016 bar, unused, original packaging -Type: Ø 160 mm 0-160 mmWs -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/180/H50 mm -Weight: 1.6 kg. Gujdpfx Adeyfm H To Rji

Condition: good (used), Pressure tester, pressure gauge, manometer, test manometer, compression gauge -Manufacturer: Hydrotechnik Limburg, pressure tester -Pressure range: 2x 0 to 10 bar Guedsyccvfspfx Ad Rsi -Dimensions: 260/150/H205 mm -Weight: 3.2 kg

Condition: used, Differential pressure indicator, transmitter, monitor, sensor, differential pressure indicator, differential pressure switch, pressure switch, low pressure switch, pressostat -Manufacturer: Danfoss, pressure switch unused in original packaging -Type: KP 1W -Diff.: 0.7 bar -Quantity: 1x pressure switch available -Price per piece -Dimensions box: 190/140/H45 mm Godpfx Ajqlgu Ded Rsui -Weight: 0.4 kg

Condition: used, High-frequency ignition device, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, UV flame simulator, ignition transformer, pressure monitor, pressure switch -Manufacturer: Fema Honeywell, pressure switch for fuel gases unused OVP -Type: DGM 310A Guodpfx Aeghnfzed Rji -Number: 2x pressure switches available -Price: per piece -Dimension box: 160/90/H65 mm -Weight: 0.6 kg/piece

Condition: used, heating, gas and oil burner, automatic burner control, gas relay, control box, burner control, burner management, pressure monitor, pressure switch, pressure regulator, gas pressure regulator -Manufacturer: Kromschroder, gas pressure regulator unused OVP -Type: GDJ15R04-0 Gsdpfxeghtpbj Ad Rjui -p max.: 400 mbar -Dimension box: 110/130/H100 mm -Weight: 0.6 kg

Condition: used, Pressure monitor, pressure switch, pressure limiter, gas pressure switch Gujdpfegh Dxaox Ad Roi -Manufacturer: Kromschroder, gas pressure switch -Type: DG50UG-6Z MIN -Control range: 2.5-50 mbar -Pmax.: 600 mbar -Dimensions: 115/75/70 mm -Weight: 0.3 kg

Condition: used, Pressure measuring device, flow measuring device, measuring and control technology, flow meter -Manufacturer: Brigon, accessories pressure measuring devices Gujdpfx Adogh Ixds Rsi -Measuring liquid: green HDM -Measuring range: up to 30 mbar -Dimensions: 95/50/H385 mm -Weight: 0.6 kg