Used Pressure Washer for sale (15,149)

Year of construction: 2017, condition: used, tank capacity: 2,300 l, 2300 liter pressure vessel made of V2A stainless steel Dcsdpoyfwrtsfx Aa Nod

Condition: used, tank capacity: 69,000 l, 69,000 liter pressure vessel made of V2A stainless steel Dedpfsyfwrgsx Aa Nocd

Condition: used, tank capacity: 36,000 l, 36,400 liter heatable/coolable pressure vessel made of V2A stainless steel Dcodpfoyfwraox Aa Nsd

Condition: used, tank capacity: 100,000 l, 100,000 liter heatable/coolable pressure vessel made of V2A stainless steel Dsdsyfwq Nspfx Aa Njcd

Condition: used, tank capacity: 80 l, 80 liter pressure tank made of V4A Dedpfjyfwmkjx Aa Nscd

Condition: used, tank capacity: 200 l, 200-liter heatable/coolable pressure vessel made of V4A stainless steel with anchor and dispersing agitator Dcsdeyfwl Tjpfx Aa Nod

Condition: used, Year of construction: 1995, Additional title: vertical tank Volume: 64 hl Operating pressure: 3 bar Operating temperature: 30 °C Width: ca. 1.300 mm Height: ca. 4.000 mm Material: stainless steel Dcsdpfx Aajvcqwme Njd Position: vertical Base construction: 3 feets

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Dodpevcqz Ejfx Aa Njcd Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: used, Year of construction: 2008, Capacity: 360 Bo/h Filling points: 6 pieces Voltage: 230 V Compressed air: min. 6 bar Length: 1590 mm Width: 700 mm Height: 1875 mm Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L Base construction: Steel rack Dedpfx Aovcqhrea Necd Features: inlcuding add-on parts, filling programm modifiable

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Flow rate: 32 l/min. - Engine: Honda GX390 petrol 8,7kW - dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three plunger pump with ceramic plungers Dodpegigqxjfx Aa Nocd - Robust steel frame - Practical holding device for gun with lance - Pressure gauge - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HP hose 3/8" + 10 m HP hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles - Gun with wash lance and flat spray nozzle The CJ-2B is a professional mobile pressure washer ideal for cleaning and unclogging pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages from house connections, cesspits, cisterns and industrial waste. The powerful Honda engine with a power of 8.7 kW and the Comet TW Premium pump with speed control guarantee maximum performance and reliability over time. This machine represents the optimal solution for professionals looking for an efficient and powerful machine, able to face the most demanding work situations thanks to the robust steel frame and the large pneumatic tyres.

Condition: good (used), functionality: fully functional, Used professional Gummi-Mayer parts washer. The unit has barely been used and is in very good, fully functional condition. Please no email inquiries! Dcedeylwbnepfx Aa Ned If you have any questions, we are happy to assist you by phone. Inspection and collection only by prior telephone appointment! Subject to changes, prior sale, and errors.

Condition: used, NC High-Pressure Vice, High-Pressure Machine Vice RÖHM NC Precision Machine Vice Type: RKD-125 ID No.: 180467 / D2950 Year of manufacture: approx. 2010 Jaw width, step jaws: 125 mm Jaw height, step jaws: 40 mm Jaw width, attachment jaws: 135 mm Dedjxxmf Uspfx Aa Njcd Jaw height, attachment jaws: 49 mm Machine vice base width: 126 mm Opening width, max.: 141 mm per side (only with step jaws, without attachment jaws) Clamping force: 4 tons Guideway height: 105 mm - High-pressure vice with mechanical force amplifier - Clamping force adjustable in 4 stages from 1 to 4 tons - 2 clamping functions: single clamping with dummy and double clamping - Various clamping ranges via 3 guide grooves in each base jaw - Step jaws (reversible) - Stable base body, ground on all sides - Can be mounted horizontally, vertically and laterally - Center jaw dimensions (L x W x H): 125 x 40 x 40 mm - Attachment jaw dimensions (L x W x H): 135 x 20 x 49 mm Dimensions (L x W x H): 680 x 135 x 155 mm Weight: 56 kg Good condition

Condition: used, Hydraulic machine vice, high-pressure clamp KESEL ARNO Jaw width: 200 mm Jaw height: 60 mm Clamping force: 8 tons Clamping range: 0 to 370 mm Opening width: max. 373 mm Guideway height: 140 mm - 2 clamping ranges adjustable via locking pin - Swivel base plate Dimensions (L x W x H): 900 x 400 x 210 mm Net weight: 125 kg Good condition Dsdpfx Asd Amwiea Necd

Condition: used, Hydraulic machine vice, high-pressure clamp ARNOLD / FRESMAK Jaw width: 160 mm Jaw height: 50 mm Clamping force: 5 tons Clamping range: 0 to 305 mm Maximum opening: 308 mm Guideway height: 112 mm - 2 clamping ranges adjustable via locking pin, 0 to 158 and 148 to 308 mm - with rotary plate Dimensions (L x W x H): 580 x 325 x 165 mm Own weight: 65 kg Good condition Dcsdpfxjxp R E Tj Aa Njd

Condition: used, Year of construction: 1995, Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel Dcedpfsvl Huasx Aa Njd

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Dcodpfx Astrbrqea Nsd

Condition: used, Year of construction: 2011, Overview This crate washer was manufactured by the German company Klotzki in 2011. It is designed for cleaning beverage crates and has been regularly serviced. The machine is immediately available and was last used in a beverage production plant. It shows regular signs of use, but is still in working condition. The operator platform is not included in the scope of delivery. Technical data  Capacity: 1,500 – 2,500 crates/h (adjustable) Treatment time per crate: ~91 sec at 1,700 crates/h, ~65 sec at 2,400 crates/h Crates in machine: 48 pieces Crate format: customizable Running direction: transverse Spray pressure: approx. 4.0 bar Lye tank volume: approx. 1.0 m³ Treatment section length: approx. 34 meters Main pump: 15 kW, 80 m³/h Drive units: Main drive: 0.33 kW Crate infeed: 0.55 kW Crate outfeed: 0.55 kW Dimensions: Length: 3,000 mm Width: 2,000 mm Height: approx. 5,000 mm Crate infeed height: 1,100 mm Crate outfeed height: 4,100 mm Weight: approx. 1,500 kg Water connections: Cleaning water inlet: R 1 1/4” Rinsing connection: R 3/4” Construction: stainless steel (except drives) Control system: LOGO controller Electrical installation: per customer specification Scope of Delivery  Spiral crate washer (upper unit) Lower tank body Dcsdpfxewu S Sus Aa Nod

Condition: used, Year of construction: 2024, Overview The bottle washer was previously used in a brewery. Due to the low number of operating hours, the machine is in very good condition, like new. It was replaced, as the previous owner wanted to run bottle formats, which did not fit this machine. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported. The machine comes with 12months warrantee. Tech Specs: Capacity: 9,500 bph Cell Pitch: 95 mm Bottles per row: 25 Dimensions + Weights: Housing: 7,162 x 2,740 x 2,500 mm / 18,806 kg Ready for operation with attachments: 7,162 x 3,540 x 2,730 mm / 31,563 kg YOM 2024 Formats: 0,25l 0,33l 0,5l 0,75l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Djdpfxjvrfivo Aa Njcd

Condition: used, Year of construction: 1998, Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consumption: 3.25 – 3.38 m³/h at 60°C Power connection: 12.0 – 12.9 kW Thermal energy consumption: 3,528 × 1000 kJ/h Dimensions Length with cabinet: 7,020 mm Width of frame: 1725 mm Height: 2300 mm Dcjdpfx Aexn A S Nja Ned

Condition: used, Year of construction: 1993, Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with standard bottle formats Dcjdpfx Aaeyb Sxas Njd

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Dcedou H R Nnopfx Aa Nod

Condition: used, Year of construction: 1999, Overview The bottle washer was previously used in a brewery. Due to the complete reconditioning in 2005 and continuously maintentance, the machine is in very good condition. All basins and the machine body are made of stainless steel. The machine is already disassembled and dry stored, so that it can be easily loaded and transported.  Tech Specs: Capacity: 6,700 bph Cell Pitch: 102 mm Bottles per row: 10 Dimensions + Weights: Housing: 7,200 x 1,300 x 2,850 mm / 13,500 kg Ready for operation with attachments: 7,790 x 3,450 x 2,950 mm / 20,000 kg YOM 1999 Formats: 0,33l 0,5l The Machine in Detail / Equipment Features: Heated by steam Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing CE certified Chemical Dosing Pumps Machine data sheet included High pressure pre rinsing Rotating Spray nozzles Single End Machine Label discharge rear right Finger discharge + finger feed Bottle cells made of plastic Concentration measurement NaOH supply liquid Sectional view arrangement of baths Spindles SST 24 volt control voltage Control Siemens S7 Regularly maintained Full machine body in SST Vapor Discharge Machine dismantled, ready to ship Automated machine Startup Dedpewg E D Iefx Aa Nocd

Condition: used, Year of construction: 1992, Overview The Kettner crate washer, type WAH 26, was manufactured in 1992. With an output of up to 2,600 crates per hour, it is suitable for use in existing filling lines for cleaning beverage crates. Technical details  Manufacturer: Kettner - Sotec GmbH Model: WAH 26 Year of manufacture: 1992 Capacity: 2,600 crates/h Dodpfx Aajw N Nbus Nocd

Condition: used, Year of construction: 2011, Overview  The bottle cleaning machine was built by the German company Krones in 2011. It was in operation at a large beverage producer until last and is still assembled.  Technical details  Capacity: 20,000 bph Formats: 0,25l and 0,75l Number of bottles per row: 22 Siemens S7 Equipment Label discharge  Rotary spraying  Continuous machine  Stainless steel body  Documentation  Software backup  Stainless steel pumps  Conductivity measurement  Finger task  Spare parts Bottle cell tips Bottle cell supports Dodpfxeu Rindj Aa Nocd

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Dodpfx Aotxd A Ssa Nocd