Used Pro Center 2000 for sale (84,346)

Condition: good (used), Year of construction: 2018, operating hours: 8,752 h, functionality: fully functional, machine/vehicle number: VDB180076, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Control: HEIDENHAIN iTNC 530 HSCI X-axis: 2,000 mm Y-axis: 1,100 mm Z-axis: 800 mm Table clamping area: 2,200 x 1,000 mm Distance spindle nose to table: 150 - 950 mm Milling spindle Tool holder: SK 50 Spindle speeds: 6,000 rpm Spindle drive: 30 kW Feed rate Feed range: 8,000 mm/min Rapid traverse: 15 m/min Tool data Tool changer: 20 Tool weight: 15 kg Tool length: 400 mm Tool diameter: 125 / 250 mm MACHINE DETAILS Total weight: approx. 20 t Dimensions (L x W x H): 5.5 x 5.4 x 3.7 m On-time: 22,813 h Spindle hours: 8,752 h Isdpfev N Hrgjx Ag Netn EQUIPMENT - Electrical preparation for 4th and 5th axes - Electronic handwheel - Automatic central lubrication system - Hardened and ground guideways - Fully protective cabin - Internal coolant system with 20 bar - Chip conveyor

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,716 h, functionality: fully functional, machine/vehicle number: 0144, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-travel: 1,200 mm Y-travel: 600 mm Z-travel: 675 mm Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load: 1,700 kg Control: Heidenhain iTNC 530 MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Itodpfx Agev Szryj Non Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Spindle on: 17716 hours

Condition: good (used), Year of construction: 2013, functionality: fully functional, Machine in good condition, hand-shown parts are not included in the set. X 1025 mm Ljbijwx N Nfsa A Hkmsad Itjdpfx Agsw Dbt Tj Non Y 560 mm Z 600 mm Heidenhain TNC 620, 16,000 rpm, HSK 63

Condition: used, machine/vehicle number: 33548, turning diameter over bed:533 mm turning diameter over slide rest:340 mm turning length:2000 mm centre height:270 mm Isdpfjcxxucsx Ag Notn turning diameter in the gap:720 mm spindle bore:80 mm :12 turning speed range:25 - 1500 U/min feeds::76 travel of compound slide-rest:110 mm spindle travel:360 mm taper MK:4 bed width:370 mm weight of the machine ca.:2,87 t dimensions of the machine ca.:4,1 x 0,95 m

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 1,200 mm, controller model: Heidenhain iTNC 530C, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, The machine was recently repainted (inside and out) TECHNICAL DETAILS X-axis: 2,000 mm Y-axis: 900 mm Z-axis: 1,200 mm Rapid traverse speed (X/Y/Z): 30 / 30 / 25 m/min Main spindle Speed range: 30 - 7,500 rpm Drive power: 25 kW Max. torque: 540 Nm Tool holder: SK 50 DIN 69871A Swivel range: ±115° Resolution: 0.001° Distance spindle nose - table Vertical: 0 - 740 mm Horizontal: 250 - 1,050 mm NC rotary table Faceplate diameter: 1,500 mm Table speed: 20 rpm Max. table load: approx. 1,500 kg Tool changer Itodpsv D N Imsfx Ag Non Capacity: 60 tools Tool holder: SK 50 Max. tool diameter: 110 mm Max. tool diameter with free adjacent tool box: 180 mm Max. tool length: 400 mm Max. tool weight: 15.0 kg Changeover time: approx. 8.0 s MACHINE DETAILS Dimensions: approx. 10.0 x 7.0 x 4.0 m Weight: approx. 33.0 t Connected load: 75 kVA Operating hours: The last service visit was in December 2019. At that time, the operating hour meter showed 42,554 hours, which was confirmed in writing by the manufacturer, AXA. The machine was dismantled in February 2020. EQUIPMENT - Swivel milling head, continuously adjustable positioning - Pick-up station - Coolant system with high-pressure cooling - Internal coolant supply - Oil mist extraction - Paper belt filter - Hydraulic unit - Measuring probe - Electric handwheel - Various tool holders (approx. 10 pieces) Rotary table is sold without the chuck shown. Any vises, tool holders, and jaw chucks shown are not included!

Condition: excellent (used), Year of construction: 2011, X-Axis: 2032 mm Y-Axis: 660 mm Z-Axis: 610 mm spindle speed: 12.000 U/min. with internal coolant power: 18 kW tool holder: SK 40 40 places table load: 2.700 kg machine weight: 18.000 kg operating hours: 11.417 hrs spindel hours: app. 5.000 hrs. (maximum) Itodpfx Agomn If De Njn spindle changed in year 2020 - Technical error and prior sale is reserved. -

Condition: new, Year of construction: 2025, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Speed ​​of travel up to 60 m/min Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Itsdpfxjvyrgqo Ag Nsn Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: like new (used), Year of construction: 2012, operating hours: 1,800 h, functionality: fully functional, * Mori Seiki NZ 2000 T2 Y2. * Only 1,600 cutting hours. * Never connected to a bar feeder. * Used exclusively for aluminum prototype manufacturing for the F1 industry. * Approx. €35,000–40,000 in tooling/equipment. * Opposed-spindle configuration. * 9-axis CNC turning and milling center. * Twin spindles. * Spindle nose size: A2-6. * Two superimposed turrets. * Two C-axes. * Two Y-axes. * Two integrated 22 kW spindle motors. * Milling motor power: 7.5 kW. * Two Renishaw automatic tool measurement arms. * Mapps 5 conversational automatic programming system. * Automatic load monitoring and tool wear control. * Tool life management and consumption monitoring system. * Dual foot pedal for chuck open/close. * Spindle head oil chiller. * 340 Nm cutting torque. * Both turrets with 16 stations each, all live positions. * Tool setup capability: up to 32 tools per turret. * Interface for bar feeder installation. * Automatic rear parts catcher with special gripper for long workpieces. * External and internal toolholders included. * Axial and radial driven tool blocks. * MQ tool clamping system. * Max. swing diameter: 320 mm. * Turning length: 810 mm. * Control: Mori Seiki MSX-701 III. Itedpfx Aswyub Njg Njn * Max. distance main spindle to sub-spindle: 1,130 mm. * Main spindle speed: 5,000 rpm. * Sub-spindle speed: 5,000 rpm. * Live tooling speed: 6,000 rpm. * Max. bar diameter: 65 mm. * X1 travel: 210 mm. * Y1 travel: +65 / -45 mm. * Z1 travel: 300 mm. * X2 travel: 210 mm. * Z2 travel: 810 mm. * Sub-spindle travel: 920 mm. * Rapid traverse X1, X2, X3: 30,000 mm/min. * Rapid traverse Y1: 20,000 mm/min. * Rapid traverse Z1, Z2: 50,000 mm/min. * C-axis resolution: 0.001°. * Both spindles equipped with Hainbuch high-precision collet chucks. * Side-mounted hinged belt chip conveyor. * Connectivity via USB, PCMCIA card, and RS-232 ports. * Machine weight: 8,300 kg. * Machine available for inspection under power. * Approximate new price: €450,000. * Supplied with transformer, documentation, parts list, electrical diagrams, programming, and operation manual. * Immediate delivery subject to prior sale.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,000,600 mm, Hartford Pro-1000 Vertical CNC 1000x600 Itodpfx Agjw Ih Hgj Njn

Condition: excellent (used), Year of construction: 2015, operating hours: 1,300 h, functionality: fully functional, machine/vehicle number: NRX20151106, Machinetype: Chucking Automatic Lathe - Multi Spindle Make: DMG MORI Type: NRX 2000 MC New in: 2015 Control: CNC Location: North Rhine-Westphalia Origin: Japan Term of delivery: to be agreed Quotation: ex site Description: CNC - Double Spindle Turning and Milling Center DMG MORI - NRX 2000 MC Double Front Spindle Simultaneous Parallel Machining Tool Drive Portal Loading Tool-Piece Carriage 14 pos. (Ø 40 - max. 150mm) approx. 1,500h Spindle-hours. Technical details/ additionals / accessories Text Dimension Unit number of spindles 2 swing diameter max. 348 mm turning diameter max. 150 mm standard turning dia. 120 mm turning length max. 80 mm distance between spindles 670 mm control COMPACTline M73 Workspindle: number of spindles 2 max. spindle speed max. 5,000 min/-1 Itjdpfewnyi Iox Ag Njn power capacity 7.5 / 5.5 kW spindle nose JIS A2-5 spindle bearing diameter - mm spindle bore - mm max. bar capacity - mm usable bar diameter - mm chucking diameter 200 mm C-Axis 0.001 ° turret: Number of Turret 2 number of tool positions 10 pos. Shank height for square tool 20 mm Drill shank diameter 32 mm turret change time 0.31 sec. Driven Tool Stations: driven station 10 pos. Spindle speed - driven tool stations max. 10,000 min -1 power capacity - driven tool-stations 1.5 / 1.2 kW movement areas: x-axis 1+2: 100 mm z-axis 1+2: 220 mm C - Axis 1+2: 360° feeds: rapid traverse ( X / Y / Z ) 30 m/min feed speeds max. 30,000 mm/min Tip feed 0 - 5,000 mm/min total power requirement 32 kVA weight of the machine approx. 5.6 t dimensions of the machine approx. 5.0 x 3.0 x 2.2 m Chip conveyor Coolant system electric hand wheel gantry loader Workpiece-storage Tool drive mechanism

Condition: used, Technical details: turning diameter over bed: 560 mm turning diameter over support: 280 mm turning length: 2000 mm centre height: 280 mm centre distance: 1600 mm spindle bore of work spindle: 65 mm range of revolution per miute: 9...1800 / 24 step U/min longitudinal feeds:: 0,025-0,09 mm/U cross feed: 0,012-0,045 mm/U Itedpjwa I Shjfx Ag Nen tailstock quill adjustment:: 225 mm tailstock taper MT: MK5 total power requirement: 18 kW weight of the machine ca.: 3,8 t dimension machine xH: 3,7 x 1,6 x 2,05 m Three-jaw chuck D=320mm Top slide rotatable 45 degrees right and left *

Condition: used, Year of construction: 1974, Technical details: turning diameter over bed: 500 mm turning diameter over support: 300 mm turning length: 2100 mm centre distance: 2000 mm Isdpju Ix Dcofx Ag Nstn spindle passage: Bohrung ca. Ø 60 mm range of revolution per miute: 35,5 - 1800 / 18 step U/min rapid motion - x-axis: Support 4,2 m/min tailstock quill taper MT: MK 5 tailstock quill adjustment: 180 mm control voltage: 220 V weight of the machine ca.: 3,25 t dimension machine xH: 3,5 x 1,2 x 1,6 m Thread cutting possible, e.g. metric thread, module thread and inch threadEilgang Quersupport Futterschutz 2x Späneauffangwanne Zubehör: (siehe vergleichbar auf Foto) 2x Lünette (1x geschlossen und 1x offen) Planscheibe 3-Backenfutter Backenpaare Flansch Spitzen div. Zahnräder *

Condition: good (used), Welding rotary table Protec KT 2000 A Load capacity 2000 Kg Infinitely variable inclination angle 0 to 120 ° with hand and foot remote control Iodpfepdqfrjx Ag Nstn Height horizontal 1200mm Height tilted to middle 1000mm Special design welding current transmission 800 Ampere length 1700mm, width 1200mm

Condition: ready for operation (used), Year of construction: 2002, Extruders and oil screw presses for soybean processing, obtaining oil and soybean cake. There are two extruders and two presses. One extruder and one press work in tandem and form a pressing line. The motor power of the press is 22 kW and the power of the extruder is 55 kW. the capacity of one line is 500-800kg/h The price refers to one line (exstruder+press) Iodpfjtxinaex Ag Nstn

Condition: new, Year of construction: 2025, ABKANTBANK-Technik Halver, YOUR competent partner for SHEARS AND BENDING MACHINES We are your contact for high-quality sheet metal processing. As a long-standing sales partner of the Polish manufacturer PROD-MASZ, we respond to the needs of our customers on site and see ourselves as an extension of production. Appropriate machines can be demonstrated if required, along with competent advice and professional instruction. We advise you individually - according to your wishes and look forward to your inquiry. Itsdpfx Agov Nwx Rs Njn Plate shears 2000/1.2mm - Working length 2050mm - Stable and robust construction for steel plates up to 1.2mm - Large cast work table - Open design suitable for continuous cuts - Back stop with scale - Declaration of conformity - CE mark Dimensions: Length: 2500mm Width: 750mm Height: 1150mm Weight: approx. 500 kg Clearance: 8cm Shipping within Germany 360€ All prices are subject to 19% VAT. Pick up yourself Cash on delivery Other dimensions 1000mm and 3000mm on request Contact:

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: NL201IJ3007, MORI SEIKI NL2000/500 CNC TURNING CENTRE YEAR 2005, 2006,2009 CONTROL MSX-850 CONTROL COLLECT CHUCK DRIVEN TOOLING 4 AXIS Ijdpfx Agowxw Ive Njtn SWARF TRAY 16 TOOL TURRET TAILSTOCK PARTS CATCHER TOOL SETTING PROBING SPINDLE SPEED MAX 6000 RPM MAX TURNING DIA 356 MM X TRAVEL 260 MM Y TRAVEL 100 (+ - 50) Z TRAVEL 590 MM C AXIS MOVEMENT 0.001 BAR CAPACITY 65 MM MACHINE COMES WITH PLASTIC EXTRACTION TANK MACHINE MAINLY USED ON PLASTIC , CONDITION IS EXCELLENT THANKS FOR LOOKING MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Condition: new, Year of construction: 2025, Free delivery up to 150 km. Folding bench 2m incl. transport rollers "RED 160 degrees" from the company Prod-Masz to try on site and to take away. You will receive professional instruction on site. Technical data: - including cut-outs in the beams - Working length: 2060 mm - Bending capacity: up to 0.6 mm - Bending angle: max 160 degrees - Bending beam thickness: 15 mm Ijdjuayatjpfx Ag Netn - Upper beam stroke: 80 mm - Weight: about 180 kg - Lifting of the upper beam in three positions Furnishing: - degree scale - angle stop - rear frame - front depth stops -Certificate CE -12 months warranty Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT Self pickup

Condition: new, Year of construction: 2024, load capacity: 2,000 kg, Protec KT 2000 HV, Hydraulically height adjustable Itjdpfx Agsncfvho Nsn Load 2000 KG Manual remote control with digital display Double foot remote control Height approx. min. 800mm tilted to middle , height max. 1400mm Height min. horizontal 1000mm diameter faceplate 1200mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Motor power 3 KW

Condition: new, Year of construction: 2025, load capacity: 500 kg, 3-axis rotary and turning positioner 500, 1000, 2000, 3000 kg load capacity, clamping disk diameter 0.5 0.65, 0.8 1.0 meter have proven themselves in the field of construction and agricultural machinery, commercial vehicles, industrial trucks as well as in the aviation and energy technology sectors. For welding, assembly, machining, etc. With their stable and robust design, flexible positioning over three axes, even overhead, and easy operation, they make welding easier. easy to operate, they facilitate the welding, assembly and handling of large workpieces. workpieces. Faster production, increased productivity Optimum positioning of the workpiece improves the welding quality and enables a higher deposition rate Improved safety, dangerous crane handling is greatly reduced Simultaneous positioning of up to three axes without time-consuming reclamping Simple operation and ergonomics during processing protect and relieve the operator Flexibility thanks to modular adaptability and customer-specific special designs possible The basic principle: By positioning the support arm rotary axis above the clamping plate, the support arm acts as a counterweight to the workpiece. counterweight to the workpiece. The machines are therefore considerably more powerful than turn-tilt tables or turn-tilt positioners. This principle makes it possible to handle the specified Itjdpfeulaxbex Ag Njn specified loads in any position. Due to the endless rotation of the 2 axes and the additional height adjustment, all workpiece positions (even overhead) are possible. possible. Speed of turntable infinitely variable 0.1 to 1.0 rpm, from 2000 kg load capacity 0.05 to 0.6 rpm. with radio remote control Rotation range 360° endless Swivel range 360° endless Stroke: 1000 - 1500mm, from 2 tons load capacity 1250 - 2000mm Arm radius up to 1000 kg 1 meter, from 2000 kg 1.5 meters

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Protec KT 2000 kg load capacity Horizontal capacity: 2000 kg Tilt capacity: 2000 kg Clamping disc diameter: 1300 mm Horizontal height: 1250 mm Tilt height to center: 1080 mm Length: 1600 mm Isdewk Hzpepfx Ag Netn

Condition: new, Year of construction: 2025, load capacity: 2,000 kg, Column Lifting Rotating Device with 2-Ton Capacity Protec Syncrolift Rotating Device/Positioner Double Column, Wireless and Manual Remote Control Column Adjustment with Two Movements Load Capacity 2000 kg, 360° Minimum Working Height: 600 mm Isdewihxaepfx Ag Notn Maximum Working Height 1500 mm Speed 0.5 rpm Drive Motor Torque 3100 N-m Clamping Plate Diameter 500 mm Rotating Motion 0.55 kW 2 to 10-Ton Capacity Available Upon Request

Condition: new, 2000 kg capacity welding rotary table, height-adjustable very robust speed infinitely adjustable from 0.05-0.7 U/min Rotary table diameter 1200 mm Tilt up 120 Total height 600 mm Height of 1450 mm up to 2050 mm height mm min. horizontal 1350, tilted to Center 1200 mm Ijdpsdvn E Eefx Ag Notn height mm maximum horizontally 1850, tilted up to mid 1700 mm Hand and foot remote control

Condition: new, 3D perforated table 2000 x 1000 x 200 mm, 100 mm grid, plate thickness 22 mm, hole diameter 28 mm, machined flat, very massive, weight approx. 750 kg. With table leg, suitable for all standard accessories with 28 mm. Price without accessories. Itjdpfxjvlli As Ag Njn

Condition: good (used), load capacity: 2,000 kg, Welding turntable, 2000 kg load capacity Diameter approx. 1200 mm Height approx. 450 mm Infinitely variable speed 0.03–2 rpm Very robust Comes with control panel and foot pedal. Itedpfx Aswtqpveg Njn

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Protec KT, load capacity 2000 kg Capacity horizontal: 2000 kg Capacity tilted: 2000 kg Stepless speed adjustment from 0.05 to 0.5 rpm (conversion on request at extra cost) With dual foot remote control Itedpfxowtrpke Ag Nen With hand remote control with digital display 380V Clamping plate diameter: 1300 mm Height (horizontal): 1250 mm Height (tilted to center): 1080 mm Length: 1600 mm