Used Centering for sale (7,564)

Call

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg good condition Cichsudfcj

more

Listing

Butzbach

979 km

centering tool CENTRICATOR

SEMA END 70-1-2-S-100-NC-A

Call

Condition: used, Year of construction: 2008, machine/vehicle number: 26448, max. workpiece diameter:29 mm min. workpiece diameter:26 mm workpiece length:66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. S8fw7 Also dependent on tool lengths, machining lengths on the component, etc.

more

Listing

Minden

882 km

CO

€520

Call

Condition: used, machine/vehicle number: 2471, scanning range inside 6 to 220 mm scanning range outside 0 to 150 mm scanning range plane 90 to 280 mm Gralh7j8m clamping shank SK 40 weight approx. 2.4 kg

more

Listing

Malsch

1,078 km

Mobile portable centering device

UMA - SZM SMZ 80/800

Call

Condition: used, Year of construction: 1971, max. workpiece diameter 80 mm Suoo7 min. workpiece diameter 5 mm workpiece length 800 mm total power requirement 12 kW weight of the machine ca. 3500 t dimensions of the machine ca. 2,4x1,8x1,75 m

more

Listing

Krause - Made in Germany Mobile Quick Centering

Achim

853 km

Krause - Made in Germany Mobile Quick Centering

Call

Condition: new, Year of construction: 2023, - Weight approx. 11,8 Kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, thus crane capacities, man hours and energy are saved if machines are used for this purpose, you have to crane to the machine and then also back again to the commissioning area - the time loss for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing at the machine) - All components are made in Germany Bfznowhyiby - Centering Din 333 form A, 60°, 5, 6,3 and 8 mm. Other wishes are also possible.

more

Listing

97076 Würzburg, Deutschland

1,096 km

Roller Alignment Centering Conveyor

Transnorm Transnorm 2500-700-600

€3,094

labeling machine Simac optical centering

Call

Condition: used, Year of construction: 2008, Transnorm Roller Alignment Centering Conveyor 2500-700-600 RA2073 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 700 mm Length: 2500 mm Roller diameter: 50 mm Roller distance:76 mm Drive motor: R17DT71D4/TH Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Construction year: 2008 nominal voltage: 380-480 V Conveying length in mm: 2500 Nominal / outside width in mm: 700 Roll width in mm: 600 Roll division in mm: 76 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Gkupqs For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

more

Listing

Fumane (Verona)

(dealership location)

1,487 km

Simac 12T 3S 3E + SL CE CO

Call

Condition: used, Year of construction: 2012, Operating hours: 18,400 h, Used labeling machine Simac optical centering This Used labeling machine Simac optical centering has 12 motorized plates with optical centering 12 photocells and 3 adhesive groups extending on a length of 50 MT Moreover it s complete with 4 axis adjustments on the trolley plus 1 glue group with 6 divisions for an L shaped seal on the trolley The L seal ironing pliers in different sizes can be modified and sized for the U seal on the bottle cap Technical specifications of the labeler used with optical centering and electronic cams A Touch screen with PLC and integrated electronics is available on the used adhesive labeling machine and can be modified on request This used Rotary labeling machine has an electric head lift system and speed regulation via inverter There is the possibility of new touchscreen programs depending on the customer s needs Automatic adhesive stations for rotary labelers The mechanical slide that carries the adhesive group can apply all types of label stickers on all types of bottles There are minimum and maximum label sizes that we can apply to it but we can also modify them upon request The keypad located at the end of the adhesive station of the used adhesive labeling machinery can memorize up to 200 different types of labels The adhesive station through a photocell system and a dedicated program automatically applies the required label format to connect to the optical centering system Availability of the used rotary labeler This Used adhesive labeling machine with an optical centering system is available from 10 20 23 at our specialized workshops With one of our Italian companies we have been building rotary and linear labeling machines for 25 years We can also overhaul and modernize your used labeling machines and upgrade them to 2023 with new electronics Additional information Contact us for a free quote we will follow you from the project phase up to the full installation and commissioning of your labeling machine This applies to both new machinery and used overhauled and guaranteed machinery We can build any new bottle sizes you need Therefore related to new bottle molds that you may decide to introduce into your product range for your used machines Rbyxjbh

more

Listing

Leipzig

1,139 km

Automatic Facing and Centering Machine

Rems Werk ADM 96

Call

Condition: used, Year of construction: 1991, workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm Ba8ewf7xue workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D.

more

Listing

Tönisvorst

(dealership location)

796 km

self-centering take

WMW max.2800 U/min.

Call

Condition: used, self centering hub (5146) Make WMW maximum 2800 RPM. Mtfjt

more

Listing

Chapel Brampton

381 km

Hey No 3 Automatic

Call

Condition: like new (used), Year of construction: 1988, USED HEY NO. 3 46” AUTOMATIC DOUBLE ENDED FACING AND CENTERING MACHINE W/ AUTOMATIC FEED Serial No. 2824-736 New: 1988 Maximum diameter of work: 6.25” Minimum diameter of work: .25” Maximum workpiece length: 46” Minimum length of work: 3” Maximum swing over bed: 21” Spindle speeds: 67 to 1430 RPM in 18 steps (change gears to produce (1) RPM rate will be supplied with machine) Length of fine adjustment to cutter: 2” Feed rates in mm per rev. of spindle: (4) steps 0.015 to 0.070 Rapid traverse rate: 250”/min. (2) Pneumatic work hold vises Spindle drives – 5.5 kW each Kjuys8jd Electrics: 3/50/220/380/420 Automatic Functions: • Auto feed of work via adjustable walking beam conveyor. • Auto positioning of work prior to machining w/ inspection of overall length. • Auto inspection of work after machining. • Auto stopping of machine in case of detection of incorrect work. (1) Pair of combination facing and centering cutter bodies to be Supplied with machine. Chip Conveyor Coolant System Weight: 12,500 lbs Dimensions: FB X RL – 84” X 128” Height: 70”

more

Listing

Achim

853 km

manuell centering

Krause Mobile Quick Centering

Call

Condition: new, Year of construction: 2022, a portable, mobile centering device, from 25 to 500 mm, 5 mm, 6.3 mm & 8 mm standard centering drills. B3pfkiic03

more

Listing

Karsin

1,381 km

Centering feeder for multi-saw

mecanisation meca 012

€3,500

Call

Condition: excellent (used), Year of construction: 1996, automat Ghwawkqq pneumatic pressure year of manufacture 2006 weight 420kg

more

Listing

Malsch

1,078 km

Centering unit, driven - 1,375 mm

AXA HFB 1-P

Call

Condition: used, Year of construction: 2010, max. workpiece diameter 140 mm min. workpiece diameter 15 mm Yw3ibo workpiece length 100 - 1250 mm Control Siemens 840 D y-axis 400 mm z-axis 900 mm table surface area 1500 x 319 mm tool taper HSK A 63 spindle speed: 40 - 6000 tool change unit 12 fach total power requirement kW weight of the machine ca. 10,4 t dimensions of the machine ca. 6,2 x 2,6 x 2,8 m End processing center incl. Sempuco indexing table SDH-SH6/016, 2 vices PZ 130 - Hy50 Probe on the vertical slide, chip conveyor, electr. handwheel,... Deep drilling also possible.

more

Listing

Schwabach

1,190 km

Centering device ,

Centrikator

Call

Condition: good (used), . Clamping shank , D = 16 mm . Issau2m Measuring range up to : D approx. 125 mm . Probe insert straight , with ball , D = 5 mm Probe insert curved , with ball , D = 5 mm . Probe insert straight , with ball , D = 1,6 mm .

more

Listing

Rottendorf

1,100 km

SOCO SYSTEM 230944

€950

Self centering container turning device

Call

Condition: good (used), Year of construction: 2008, Technical data Manufacturer: SOCO SYSTEM Year of manufacture: 2008 Overall dimensions: 1.375 x 740 x 1.040 mm (LxWxH) conveying length: 1.300 mm Conveying width: 250 - 510 mm, pneumatically adjustable Roller type: plastic roller pitch: 125 mm Motor: 2x gear motor Motor data: SOCO SYSTEM Bd83zpughgg Conveying speed: constant Special features: Conversion from carton sealer T-55 Condition: used / fully functional Function test: OK

more

Listing

Kreuztal

907 km

VOLCANO 20 to

Call

Condition: new, Year of construction: 2023, Technical data: Load capacity: 20 tons 1-side driven self centering smallest diameter: 450 mm largest diameter: 3500 mm Bev89uxfjep speed: 6 - 60 m/hour CE-mark dimension (length x width x height): approx. 2400 x 1500 x 950 mm weight: approx. 1.8 tons The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

more

Listing

P.E. Labellers 6T 3S 3E mechanical centering

Fumane (Verona)

(dealership location)

1,487 km

labeling machine PE Labellers mechanical centering

P.E. Labellers 6T 3S 3E mechanical centering

Call

Condition: used, Year of construction: 2022, Operating hours: 0 h, Used labeling machine PE Labellers mechanical centering Introduction to the Machinery Labeling equipment with mechanical centering is an advanced labeling system produced by P E Labelers Designed to ensure precision and efficiency this tool is a relevant choice for experts in the bottling sector Mechanical and Functional Characteristics This Used labeling machine PE Labellers mechanical centering packaged in 2022 features an operating capacity of 5000 BPH representing the amount of bottles it can label in one hour Inside there are six rotary plates that operate on three stations These plates moving clockwise facilitate an efficient labeling procedure allowing the separation of the work phases The labeling technique used is based on an adhesive method This mode ensures a stronghold of the labels minimizing any defects or inconsistencies As regards adjustments the automatic system manages the labels while the adjustment of the head occurs manually This dual mode allows you to combine the effectiveness of automation with the precision of manual control Technical specification and question We manage the Used bottle labeling machine to center bottles with a maximum bottom diameter of 90mm What wheelbase pitch does the Used bottle labeling machine have 282 26 mm The carousel diameter of 540 mm of the Used labeling machine PE Labellers mechanical centering What PLC is fitted It does not have a PLC and mounts a card to manage the bottle flow What type of adhesive groups they are Packlab 40 m paper passage 200 mm with panel What type of adhesive station slide is fitted 4 axis slide for all types of bottles Does it have a drive motor at the output of the machine no Have you also overhauled the electrical system no this is controlled and functional What bottle sizes do you have available N 1 bottle format of 96mm Electrical and Safety Details of the Used Labeling Machine PE Labellers mechanical centering From an electrical point of view the machine works with a voltage of 400V using a power of 9kW and a standard frequency of 50Hz These parameters are essential to ensure the correct functioning of the system In terms of security the device has specific functions integrated The current condition in storage indicates that is ready to put into operation when necessary The machine also has specific safety measures making operations safer for operators Instruction and maintenance manuals included providing detailed guidance for the correct maintenance and management of the device Weight at 3400kg the machine s robustness and durability are assured making it a solid solution for long term labeling processes Conclusion The bottle labeling machine represents a balance between advanced technology and practical functionality Thanks to its technical specifications and safety features it is positioned as a reliable tool for bottling industry experts The combination of precision efficiency and safety makes this machine a leading choice for those looking to improve or expand their labeling operations Uy9oskp

more

Listing

Wiefelstede

(dealership location)

786 km

Centering point inner part

unbekannt Ø 66 x 320 mm

€20

Call

Condition: used, moving point, moving center point, moving center point, moving lathe point, pressing tool toggle press -Component: from a rotating center point Bo3huj09o3 -Use: e.g. as a pressing tool -Dimensions: see photo techn. drawing -Dimensions: Ø 66 x 320 mm -Weight: 3.3 kg

more

Buy-it-Now

Manual centering clamps

100

€750

Condition: good (used), 7x Manual centering clamps Manufacturer: Unbekant Type: 100 2vigxi Max. Clamping width: 340mm Jaw width: 100 mm Price per piece 750€ H2 -R8/F4F-1; 1 piece, 580x120 mm, 100 mm , 23kg.

Chamfering and centering machine

Listing

Lüdenscheid

868 km

SVIN-Kuhn LKA 80

€19,000

Call

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: Gc0qdp7 - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

more

Listing

Willich

802 km

centering point ø 120

MK5, ø35 - ø120 mm

€155

Call

Condition: good (used), Travelling center point, heavy-duty design Cone holder MK 5 Cfiayvb8xy Smallest ø 35 mm Max. ø approx. 120mm Total length approx. 250 Weight approx. 12 kg

more

Listing

Bühl

(dealership location)

1,081 km

Labeling machine for sale with optical centering 6

BAIER ZPD-S 1/100

Call

Condition: used, workpiece length 30 - 600 mm workpiece dia. 6 - 60 mm face diameter max. 50 mm core boring - depth 50 mm forward feed of working head 55 mm feed speeds max. 4000 mm/min rapid speed 6 m/min fine feed 10 mm/min spindle turning speed range 700 / 1400 U/min drive motor 3,7 kW weight of the machine ca. 280 kg dimensions of the machine ca. 1,10 x 0,50 x 2,00 m 2rgovu

more

Listing

P.E. Labellers 8T 3S 3E adhesive SL Glue

Fumane (Verona)

(dealership location)

1,487 km

P.E. Labellers 8T 3S 3E adhesive SL Glue

Call

Condition: used, Year of construction: 2007, Operating hours: 14,700 h, Labeling machine for sale with optical centering system Labeling Machine with Optical Centering System Available for Purchase For sale is used adhesive labeling machine boasting an advanced optical centering system This apparatus is fitted with 8 motorized plates each complemented with a dedicated photocell for precise optical alignment It incorporates three adhesive assemblies spanning 40 MT and an intricate 4 axis adjustment mechanism mounted on a trolley In addition there s a supplementary adhesive unit with 6 divisions tailored for L shaped sealing also on a trolley Notably the L seal tools can be adjusted to cater to U seal applications on bottle caps Technical Details for PE Labelers The PE labeling machine is equipped with a touchscreen interface complemented by an integrated PLC and modern electronics all of which can be tailored to specific needs Features include an electric lift mechanism and speed modulation via an inverter Additionally new touchscreen programming can be introduced tailored to the unique requirements of the user Automatic Labeling Machine with Adhesive Stations for Rotary Labelers The machine s mechanical slider bearing the adhesive unit has the versatility to apply diverse label types to an array of bottles There s a specified minimum and maximum label dimension that it can accommodate though these parameters can be altered upon request Positioned at the adhesive station s end is a keypad capable of storing configurations for up to 200 distinct label variants Through its dedicated program and a photocell system the adhesive station autonomously applies the chosen label format all while synchronizing with the optical centering mechanism Availability of the PE Labelers for Purchase This adhesive labeling machine with optical centering is set to be available from 26 10 23 at our specialized workshops In a fruitful collaboration spanning 25 years with one of our Italian partners we ve been crafting both rotary and linear labeling machines Moreover we offer refurbishing and modernization services for your existing labeling machines updating them with cutting edge 2023 electronics Contact us today for a complimentary quote Our support extends from the conceptual phase right through to comprehensive installation and initialization of your labeling machine be it brand new or a refurbished and warranted unit We re adept at crafting any new bottle dimensions you might require aligned with new bottle molds you choose to incorporate into your product assortment Bfg7cryq3je

more

Listing

Wiefelstede

(dealership location)

786 km

Inner centering device

Centromat Typ 4

€150

SELF-CENTERING STEADY REST D200-820 SMW

Call

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Centromat type: 4, size: 1 Vspzzm -Clamping range: 54 - 140 mm -Dimensions: 315/112/H102 mm -Weight: 1.3 kg

more

Listing

Linz

1,450 km

SMW SO-ZSW-200820X-100-WV-75

€6,900

FCA ONO plus VAT

Call

Condition: like new (used), Year of construction: 2010, STOCK SALE Type: SO-ZSW-200820X-100-WV-75 Manufacturer: SMW Condition see pictures (in stock) Description: • Self-centering steady rest in special design • designed for hydraulic actuation as well as centralized lubrication via built-in metering cartridges and central connection • Cylinder at rear, steady rest including end position control for steady rest open position • Sealing air connection • safety valve • Cam-controlled forced return of lever arms 9rluybhlu • Steady rest with connection at lower edge of body for water flushing in case of leakage at the outer levers by means of bubble head (media supply is internal) • centering range: 200-820 mm • Lever/roller width: 75/29 mm • Max. Clamping force/roller: 30 kN • Cylinder diameter: 100 mm • Max. Operating pressure: 70 bar

more

Buy-it-Now

Centering and Clamping Bushes Clamping System

Parotec Power Grip 10/123

€120

Condition: like new (used), For sale is the following item: - Our offer number: 10/123 - Power Grip centering and clamping bushes index for zero point clamping system - Manufacturer: Parotec - Type: Power Grip diameter 92 mm H 23 mm - For installation in pallets, fixtures and clamping devices - 2 pieces available (quantity sold per auction 1 piece) - weight 1 pcs : 0,8 Kg - optical condition according to photos - as good as new condition - functional Enclosed also photos of the other items that belong to this zero point clamping system . - It is a complete zero point clamping system . This is visible in various advertisements in our store . 13 pcs Pallet carrier ( size always the same only different holes. 1 pc Pre pallet (same size) 1 pc Pallet carrier with pneumatic connection dimensions: 435 x 435 mm 16 pcs Centering and clamping bushes standard 2 pcs centering and clamping bushes index 4 pcs chip guard 2 pcs. pallet supports 1er 160 x 160 mm Pneumatic control unit for the operation of the base carrier Pneumatic control unit for 2 pallet carriers Customers who are interested in the complete zero point clamping system please contact me and ask for a quotation. Notes: 2ingc The goods offered here usually come from company liquidations and insolvencies. Due to missing type plates it is not always possible to give exact article data. The item pictures are original photos that show the actual item condition. If several identical items are offered, only one of the items is photographed. There may be slight variations in the item condition of the individual item. Jwt9nu Should an item be opened or repaired/rebuilt by the buyer, any warranty claim will be void. This also applies if repairs and modifications are carried out by third parties without prior agreement. Company names and trademarks used are the property of their owners. They serve exclusively for the identification and description of the existing goods.

Centering conveyor before debarker

Listing

Geiselwind

1,126 km

Centering unit hydraulic

Dendro Maskin Schweden ZH

Call

Condition: good (used), Centering in front of creel or other saws. Lateral adjustment. Centering rollers. Lifting and lowering trough. Ideal also for model. Wjy0gbfq

more

Listing

Ventspils

1,550 km

SODERHAMN

€12,500

Call

Condition: reconditioned (used), Year of construction: 2010, Centering conveyor before log debarker CAMBIO.After repair. 2w2p0

more

Buy-it-Now

Centering vise

Schunk KONTEC KSC 60

€500

Condition: good (used), Centering Clamp Manufacturer: Schunk Cbsdy3gx2w Type: KONTEC KSC 60 dimensions LxWxH: 164x60x70,5mm jaw width: 60 mm Clamping force: 15 kN Weight: 4,2 kg Price per 1 piece 500 € Quantity: 3 pcs H4-R1/F1D-1;

Listing

Wiefelstede

(dealership location)

786 km

Inner centering device

Centromat Typ 4

€190

MEM multi-saw with a centering device

Call

Condition: used, Container turning device, welding turning device, welding turning device, welding device, welding turning table, welding turning and tilting table, welding turning device -Centromat type: 4, size: 2 -Clamping range: 85 - 220 mm -Price: per piece -Number: 2 pieces Bewokddrbk -Dimensions: 515/210/H200 mm -Weight: 3.9 kg/piece

more

Listing

Berlin

(dealership location)

1,143 km

Centering Machine

LOH WG 1-15mm

Call

Condition: ready for operation (used), Was used for processing lenses, lens diameter: 1-15mm, year of construction: 80s. Im7vmjhn0

more

Listing

Więcbork

1,370 km

SELF-CENTERING PLANER

OSI Machinerie SCP-450 20% savings

Call

Condition: new, Year of construction: 2019, This machine is the only self centering planer in the world. It is patented. In some cases, the machine gives up to 20% savings on material compared to a standard planer. Machines are manufactured in Canada. About 84 pieces work on the American market. In Europe, it is a novelty. MM is the only representative of OSI in Europe. For additional information please contact us. We will organize tests on your wood. Ibke2lh

more

Listing

Karsin

1,381 km

MEM Maschinenbau 1mrf

€22,000

SELF-CENTERING SCROLL CHUCKS ▪ 3-JAW

Call

Condition: not inspected (used), Year of construction: 1989, • Max width of saws 400mm • Max cutting height 140mm • 132kW engine • Centerer Cee97il00z

more

Listing

Spittal an der Drau

1,516 km

Bison 3575-500

€6,984

Call

Condition: like new (used), Year of construction: 2015, Used, as new condition with slight traces of use - Type 3575, steel body - Cylindrical centring fixture, form A, DIN 6350 - Bore Ø 190 mm - Item no.: 353575090900 Standard accessories: - 1 pc. Hard base jaws - 1 pc. Hard top jaws - 1 pcs. clamping key - Fixing screws - Hardened and ground working surfaces - Balanced scroll plate - Chucks above ø500mm have additional T-slots - Flexible mounting system: mounting from the back or front of the Dpmvr8n chuck by use of an adapter plate

more

Buy-it-Now

Centering vise

Schunk KONTEC KSC 80-130

€550

Condition: good (used), Centering Clamp Manufacturer: Schunk Cbsdp8dpcy Type: KONTEC KSC 80-130 dimensions LxWxH: 250x80x84,5mm jaw width: 80 mm Clamping force: 20 kN Weight: 10,6 kg H4-R1/F1D-2;

Listing

Wiefelstede

(dealership location)

786 km

centering device

Schied 460/160/H160 mm

€450

Call

Condition: used, Centering device, centering unit for bending machine, straightening machine, sheet metal straightening machine, strip straightening machine, strip straightening device, sheet metal straightening system, for eccentric press, hydraulic press B9dwkg9c2l -Manufacturer: Schied: centering device -Hole distance: 300/90 mm O 13 mm -Dimensions: see photos -Total dimensions: 460/160/H160 mm -Weight: 17.5kg

more

Listing

Kunsziget

1,671 km

SELF-CENTERING VISE

Kron 125C

€1,480

Call

Condition: new, Year of construction: 2023, This centering vise can be ordered with normal or elevated jaws too. Normal jaws: S1 (mm) 9 - 105 S2 (mm) 105 - 201 S3 (mm) 107 - 203 Ck7doxiblq S4 (mm) 201 - 29 Elevated jaws: S1 [mm] 9 - 105 S2 [mm] 105 - 201 S3 [mm] 107 - 203 S4 [mm] 201 - 299

more

Listing

Wiefelstede

785 km

Centering point

unbekannt 680-01 MK4 rechts

€440

Centering point face driver

Call

Condition: used, Face drivers, face drivers, face drivers -CoA small range -Clamping circle Ø: 12-50 mm -Range of rotation: 13-100 mm -Delivery in: wooden box -Content: 1 basic body, 4 driver blades Gvrsbo Clamping circuit Ø: 12; 20; 32; 50 mm -1 center point Ø: A = 6 12 mm. -Recording: MK4 -Number: 1x face driver available -Price: per piece -Weight: 3.7 kg

more

Listing

Wiefelstede

785 km

WMW ABW Rapid MS4 / Rapid4

Call

Condition: used, Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: WMW ABW Rapid, face driver 8 pieces -Type: MS4 / Rapid4 -Intake: MK4 B9llxj30w -Forehead dimensions: 6x Ø 46 mm / 1x Ø 40 mm / 1x Ø 30 mm -Price per piece

more

Listing

Wiefelstede

785 km

Centering point face driver

ABW MS3 MK3

Call

Condition: used, Face driver, face driver, face driver, driver tip, face driver, face driver -Manufacturer: ABW, face driver 4 pieces -Type: MS3 -Intake: MK3 -Forehead dimensions: 1x Ø 22 mm / 3x Ø 32 mm Ckjxpkgidg -Price per piece

more

Auction

CNC turning and grinding center

EMAG VSC 400 DDS

€8,000

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, TECHNICAL DETAILS Working range Diameter of the legs: 350 mm Rotation diameter: 360 mm X-trajectory: 725 mm Z-trajectory: 547 mm Y-trajectory: 307 mm Main spindle Spindle flange in accordance with DIN 55026: size 8 Spinning bearings - Ø front: 120 mm Maximum speed: 6000 rpm Main drive AC motor 40% ID: 45 kW Maximum power: 58 kW Full power from spindle speed: 480 rpm Moment 40% ID: 480 Nm Maximum moment: 620 Nm Transport drive High speed X/Y/Z: 45/45/30 m/min Transport force in X/Y/Z: 5,5/11/11 KN Ball roller spindle in X/Y/Z: 40 mm Revolver star Intake cylinder shaft DIN 69880: 4 gang Shaft Ø: 40 mm Grinding spindle 1: HSK C63, 9,000 rpm, 19 kW Grinding spindle 2: HSK C32, 42,000 rpm, 7.5 kW hydr. Grinding spindle: 32,000 rpm, 0.9 kW Electrical equipment Operating voltage: 400 V Control voltage – DC: 24 V Control voltage – AC: 230 V Frequency: 50 Hz Bijbuutlwsw MACHINE DETAILS Length: 5,060 mm Width: 1,960 mm Height: 2,900 mm Weight: 12,000 kg Fixed pick-up date of the machine on 27.12.23 or 09.01.24. Bidder is obliged to pick-up the machine on time.

3-axis vertical machining center

Auction

Deckel Maho DMP 45 V Basic

€16,500

Condition: new, Year of construction: 2006, Operating hours: 0 h, machine/vehicle number: 15225450054, Functionality: fully functional, Cover Maho DMP 45 V linear Basic - 100% mechanical / 95% electrical finished as part dispenser or for prefabrication Last modernized with parts in 2016 and maintained to this day - unused Highlights: - unrivalled chip-to-chip time of 1.8 s thanks to modified double gripper principle (synchronized stroke and rotary movement) - Guaranteed shortest tool change times - workpiece change in 3 s thanks to 180° swivel/changing table - generously dimensioned machine bed - Compact machine design - maximum precision and quality due to high rigidity and vibration stability thanks to traveling column design - Linear drive for maximum productivity TECHNICAL DETAILS Travel X / Y / Z: 450 / 270 / 280 mm Option package 4th axis: NZ; dividing head and counter bearing Center height: 130 mm from FTW (provision without servo motor) Accuracy: 0.008 mm Feed rate: 1 - 15,000 mm/min Rapid traverse X / Y / Z: 80 / 72 / 72 m/min Control: Siemens 840 D Powerline Table: 2 pcs. 660 x 300 mm Workpiece weight: max. 200 kg Table changeover time: 3 s Spindle speed: 20 - 18,000 rpm Torque: 40.5 Nm Tool holder: HSK-A40 Tool length: 180 mm Chip-to-chip time: 1.8 s MACHINE DETAILS Weight: approx. 6500 kg Installation dimensions: 4065 x 3280 x 2466 mm Transport dimensions: 4065 x 1845 x 2412 mm Voltage: 400 V 3-phase / 230 V 50 Hz Control voltage: 24 V Power consumption: 50 kVA Compressed air: 6 bar Cooling liquid: 200 l Cooling flow rate: 40 l/min Pressure: 2.5 bar Internal cooling: IKZ through spindle Internal cooling liquid: 600 l Internal cooling flow rate: 23 l/min Pressure: 40 bar EQUIPMENT - Chip conveyor - Coolant tank Bhhax8rmzwy

Auction

Mazak VARIAXIS i-700

€150,000

Condition: excellent (used), Year of construction: 2016, Operating hours: 9,760 h, Functionality: fully functional, 5-axis vertical machining center with simultaneous machining and comprehensive accessories - Gressel zero-point clamping system (5-axis vice), 100 tool holders and more! Machine was in use until the beginning of 2023 and has only 2,542 h of pure machining time - as good as new! Built in December 2016, but only commissioned in March 2018. TECHNICAL DETAILS X-axis: 630 mm Y-axis: 1,110 mm Z-axis: 600 mm A-axis: -120° - 30 ° C-axis: 360 ° Control: Smooth X, 5-axis simultaneous machining Table size: Ø 700 x 500 mm Table load: max. 700 kg Spindle speed: max. 18,000 rpm Rapid traverse X/Y/Z: 60/60/56 m/min Spindle motor: 35 kW Ljfqbebbnx Tool holder: HSK-63 Tool magazine: 40 tool positions Cooling system: IKZ MACHINE DETAILS Operating hours: 9760 h Machining time: 2542 h Dimensions: 2400 x 4121 x 3457 mm Weight: 15.5 tons EQUIPMENT Mayfran ConSep 2000 II chip conveyor with filter 70 bar high-pressure pump, 3 pressure stages Mazak Monitoring System B, Renishaw RMP measuring probe Removable handwheel Air through the spindle Air at the workpiece Coolant on the workpiece Synchronous thread cutting Program memory extension 32 MB Cylinder interpolation G07.1 Tool input compensation G54.1 Tool radius compensation 5-axis package for Smooth X Oil mist extraction 100 pieces HSK63 tool holder 1 piece zero point clamping plate, Gressel 1 piece 5-axis vice, Gressel

Auction

Matec 30HV

€12,000

Condition: good (used), Year of construction: 2001, Operating hours: 63,953 h, machine/vehicle number: 0363, Functionality: fully functional, Large vertical machining center with 4 axes Vw0a0zz TECHNICAL DETAILS X-axis: 4,000mm Y-axis: 800mm Z-axis: 1,000mm B-axis: 1 degree swivel Spindle speed: 12,000min Control: Heidenhain TNC 430 iTNC Tool holder: SK 40 Number of magazine positions: 48 MACHINE DETAILS Switch-on time control: 11342 h Machine switch-on time: 63953 h Program run: 30055 h Installation volume: 8.17 x 536 x 4.50 m Operating voltage: 400 V Connected load: 42 kW Transport length: approx. 6780 mm Transport width: approx. 3120 mm Transport height: approx. 3200 mm

Universal machining center

Auction

DMG DMU 60 monoBLOCK

€15,000

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Machine including measuring probe TECHNICAL DETAILS X-path: 630 mm Y-path: 560 mm Z-path: 560 mm Number of axles: 4 pieces Control: Heidenhain MillPlus Table dimensions: 1000 x 600 mm Spindle speed: 12,000 rpm Rapid traverse: 30 m/min Tool changing device: 24-fold Spindle hours: approx. 12,500 h 3hnwdxp

Auction

Hurco VMX24

€6,800

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, Machine interior repainted, covers new wipers TECHNICAL DETAILS x-path: 610 mm y-path: 508 mm z-path: 610 mm Speed range: max. 10000 rpm Control: UltiMax 4 Tool holder: SK 40 Tool positions: 24 (magazine) Table load: max. 1 t MACHINE DETAILS Machine weight: 5 t Wwcj2mpu Space requirement: 2.2 x 2.4 x 2.5 m

3-axis vertical machining center

Auction

Deckel Maho DMP 45 V linear High-End

€15,000

Condition: like new (used), Year of construction: 2006, Operating hours: 5,214 h, machine/vehicle number: 15225460024, Functionality: fully functional, Maho DMP 45 V linear high-end cover - 100% finished and ready for use after commissioning routine for longer service life Last modernized with parts in 2016 and maintained to this day - few operating hours Highlights: - unrivalled chip-to-chip time of 1.8 s thanks to modified double gripper principle (synchronized stroke and rotary movement) - Guaranteed shortest tool change times - workpiece change in 3 s thanks to 180° swivel/changing table - generously dimensioned machine bed - Compact machine design - maximum precision and quality due to high rigidity and vibration stability thanks to traveling column design - Linear drive for maximum productivity TECHNICAL DETAILS Travel X / Y / Z: 450 / 270 / 280 mm Option package 4th axis: NZ; dividing head and counter bearing Center height: 130 mm from FTW (provision without servo motor) Accuracy: 0.008 mm Feed rate: 1 - 15,000 mm/min Rapid traverse X / Y / Z: 80 / 72 / 72 m/min Control: Siemens 840 D Powerline Table: 2 pcs. 660 x 300 mm Workpiece weight: max. 200 kg Table changeover time: 3 s Spindle speed: 20 - 22,000 rpm Torque: 40.5 Nm Tool holder: HSK-40E Tool length: 180 mm Chip-to-chip time: 1.8 s MACHINE DETAILS Weight: approx. 6500 kg Installation dimensions: 4065 x 3280 x 2466 mm Transport dimensions: 4065 x 1845 x 2412 mm Voltage: 400 V 3-phase / 230 V 50 Hz Control voltage: 24 V Power consumption: 50 kVA Compressed air: 6 bar Cooling liquid: 200 l Cooling flow rate: 40 l/min Krfvx8j Pressure: 2.5 bar Internal cooling: IKZ through spindle Internal cooling liquid: 600 l Internal cooling flow rate: 23 l/min Pressure: 40 bar EQUIPMENT - 1 table - divided into set-up room and work area side - INTERLIT 600 l IKZ system - Chip conveyor - INTERLIT 600 l paper belt filter system - Special equipment 2 x dividing head and 2 x counter bearing, spare motor spindle

Auction

Kitamura Mytrunnion-1

€16,000

Condition: good (used), Year of construction: 2007, machine/vehicle number: 15014, Functionality: fully functional, TECHNICAL DETAILS Bhhcishgmxc X-axis: 325 mm Y-axis: 510 mm Z-axis: 460 mm A-axis: 140° (-110° to +30°) C-axis: 360° Speed: 150 - 15,000 rpm Control: Fanuc 300i Tool positions: 60 Tool holder: BBT30 Tool diameter x length: 60 x 200 mm Tool weight: max. 2 kg Table size: 120 mm MACHINE DETAILS Footprint: 2189 x 3122 mm Height: 3119 mm Weight: 6850 kg EQUIPMENT Chip conveyor double-deck type with filter system Cooling through the spindle Nurbs interpolation High-precision contour control with 64-bit Risc processor High-speed machining with 2,500 blocks/second The control reads 600 blocks in advance 16 MB data server Nano interpolation: Positioning command to the server from the control is calculated in nanometers 5-axis programming support: tool center point machining for 5-axis machining + tool radius compensation for 5-axis machining Spatial movement of the coordinate system for 5-axis machining

3-axis vertical machining center

Auction

Deckel Maho DMP 60 V linear

€15,000

Condition: reconditioned (used), Year of construction: 2016, Operating hours: 9,874 h, machine/vehicle number: 560028, Functionality: limited functionality, Vertical machining center from Deckel Maho's special series: Deckel Maho DMP 60 V linear - high-end milling with preparation for automation solution (robot interface, unmanned production) Built in 2002 and last modernized with parts in 2016 and maintained to this day - few operating hours Functionality: conditionally functional, due to the development of an automation solution Automation: - Robot loading - the two rear cabin parts were removed to accommodate the cladding elements of the robot cell - Wiring simulated with Euchner safety switches - the cable ducts in the switch cabinet are open Highlights: - unrivalled chip-to-chip time of 1.8 s thanks to synchronized stroke and rotary movement - Shortest tool change times - workpiece change in 3 s thanks to 180° swivel/changing table - maximum precision and quality due to high rigidity and vibration stability thanks to traveling column design - Linear drive for maximum productivity TECHNICAL DETAILS Travel X / Y / Z: 600 / 400 / 425 mm Option package 4th axis: NC dividing head + counter bearing Center height: 160 mm from FTW (provided without servo motor) Feed rate: 1 - 20,000 mm/min Rapid traverse X / Y / Z: 80 / 65 /65 m/min Control: Siemens 840 D Powerline Table: 2 pcs. 660 x 400 mm Workpiece weight: max. 300 kg Table changeover time: 3 s Spindle speed: 20 - 18,000 rpm Torque: 130 Nm Tool holder: HSK-A63 Tool length: 250 mm Chip-to-chip time: 1.8 s MACHINE DETAILS Voltage: 400 V 3-phase / 230 V 50 Hz Control voltage: 24 V Power consumption: 50 kVA Cooling liquid: 200 l Cooling flow rate: 40 l/min Internal cooling: IKZ through spindle Internal cooling liquid: 600 l Internal cooling flow rate: 23 l/min EQUIPMENT Bhhavfemcf0 - 1 table, set-up area and work area side - INTERLIT 900 l IKZ system (high pressure with 40/80 bar pump and pump circuits, spray gun, level compensation pump, near-spindle chip flushing, IKZ) - Chip conveyor - INTERLIT 600 l paper belt filter system - Robot base as a connection to the machine bed - 2x precision dividing heads from FTW, center height 160 mm with counter bearing without servo motor - Workpiece palletizing (1x removal, 1x deposit) - Headstock with Kessler spindle according to DMG service - used compact filter system / 3 x chip conveyor IKF400 -Special equipment: headstock, compact filter system, tool magazines, spare parts, robot cladding

Horizontal machining center

Auction

Matsuura MAM 600HG PC-8

€12,000

Condition: good (used), Year of construction: 1999, Functionality: fully functional, Machine is equipped with 8 pallets and 4 axes. TECHNICAL DETAILS Travel X/Y/Z: 600/600/6250mm B-axis: 0.001º Rapid traverse X/Y/Z: 24 m/min Feed X/Y/Z: 10 m/min Spindle speed: 30-10,000 rpm Control: Yasnac J300 Pallets: 8 pieces, 400 x 400 mm Spindle bearing diameter: 80mm Spindle power: 22/15KW Mounting: BT 40 taper EQUIPMENT Bhhbwwau3rc - 240 tools prepared - Paper belt filter - Chip conveyor - IKZ 50 bar - Blum laser tool monitoring - many control options: e.g. Advanced Zee-Lag G function