Used Production Printer for sale (17,894)

Condition: good (used), functionality: fully functional, Paper production line consisting of stock preparation, paper machine, inline coaters, calander, reeler, offline calander, slitter winders and reel packer. Fully upgraded by Valmet in 2019, including formmaster, topformer, shoepress, pre-dryer section, inline coating, multinip calender and reeler. Characteristics: Bodevptbuopfx Aa Nowi Capacity: max ~ 350000 T/pa Width: 7500 mm Grammage: 35 – 170 gr/m2 Speed: max 1400 m/min

Condition: excellent (used), Inkjet printers Videojet 1520/1560/1630 different models available Type 1520 Type 1560 Type 1630 diverse consumables available (1 pallet) Bwjdpfsvmdw Uex Aa Nji Total of 25 units!!! Sale only as a complete lot!!! Very good condition, directly from production!!!

Year of construction: 2017, condition: excellent (used), HIGHLY AUTOMATED, MODULAR SYSTEM FOR DIGITAL BOOK PRODUCTION ("BOOK ON DEMAND") AND SHORT RUNS – TECNAU LIBRA 800 Bwjdpfoylyhdox Aa Nei Intended Use: Suitable for the conversion and processing of short runs and single copies ("books of one") with variable sizes, page counts, and covers. Performance: from print run 1; up to 800 copies per hour Book Format: min. 100 x 125 mm / max. A4 Thickness: min. 2 mm / max. 60 mm Equipment / Further Details: Line Configuration: 1.Roll-to-Stack Feed: Unwinder, merger, Dupla cutter, and book assembly station for the production of book blocks with 2-up printing. 2.Sheet Feeder: A variable number of loose sheets can be added as inserts to the book block. The sheets must have the same size and print run as the book block being processed. 3.Infeed to Binder: Manual feeding station for pre-fabricated book blocks, conveyor with scanning station, book turnover module, and robotic loader at the binder. 4.Variable Binder: For the production of softcover books. The binder is equipped with PUR for the spine and hot-melt glue for the side gluing. 5.Softcover Cover Feeder: Configured with a sheet cover feeder; pre-printed covers are fed, trimmed at the front, side-trimmed, and creased to the exact thickness of the corresponding book block. 6. Cooling tower/cooling screw (product-specific) not included - can be ordered according to customer requirements (product type). We are happy to assist with this. 7.Variable Three-Knife Trimmer: Suitable for trimming books with variable dimensions in three axes and different cover types. 8.System Control Software Finishing Line The entire process is controlled via 2D Data Matrix codes. Through the code, the system receives authorization for the following automatic settings and workflow control: • Information on book dimensions and inserts (quantity and sequence) • Binder setup (spine position, thickness, and length) • Cover preparation: Softcover → creasing, cutting, edge trimming • Correct book-to-cover matching • Three-knife trimmer (blade positioning is automatically adjusted to the book dimensions)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, STC-Ref:G-821-0097 Bsdpfxev U Tvps Aa Nowi Duplo DSF-6000-Pro DIGITAL, Year: 2021, total counter: 1,8 Mio. format: 356x525 mm equipped: - 2 x loop stitching heads Duplo i saddle - trimmer DBMS-T Front trimmer - DKT-200 head and foot trim - DBM-LSW belt delivery lang/long - PC-controler - Cut-off device parallel 6mm for DKT-200tr - envelope feeder für/for DSF6000 - touchscreen - batch counter DKT-200 - DSF-6000 digital sheet feeder - barcode kit for cover feeder DSF 6000 - Barcode kit for DSF 6000 content compartment - Duetto LDR connection bridge DSF - 2 x collating tower DSC-10/60 i - Bridge - DBMS-F collating-, scoring- and plough folding unit - DBMS-S saddel stitcher 2 x Hohner - 2 x spare knives upper knive / lower knive --> available: 04/2025

Condition: used, Year of construction: 1996, Item: AL-010188-Alfa Laval Separator MRPX314HGV-74C Alfa Laval MRPX 314 HGV-74C Milk Clarifier Separator Pre-owned Alfa Laval MRPX 314 HGV-74C self-cleaning clarifier separator in stainless steel construction. Manufactured by Alfa Laval Separation A/S, Søborg, Denmark. Complete unit in good used condition – ideal for clarification of milk or other low-solids dairy liquids. Technical Details Type: MRPX 314 HGV-74C Manufacturing No.: 2969923 Product No.: 881007-01-00 Bowl speed: approx. 8,000 rpm Drive motor: approx. 11 kW Operation: self-cleaning (automatic sludge discharge) Material: acid-resistant stainless steel (AISI 316 L) Bowl volume: approx. 6 L Capacity: up to 10,000 L/h for milk clarification Design: hermetic bottom feed with paring-disc liquid outlet Features • Continuous separation of milk and whey with minimal product loss • Gentle, hermetic feed system – prevents air entrainment and foaming • Automatic solids discharge system • Includes complete bowl assembly: - Top Part No.: 538544-80 - Bowl No.: 537872-80 Bjdpfxexqqqls Aa Nowi - Bottom Part No.: 537503-64 Condition Machine disassembled, cleaned, and stored indoors in Denmark. Available for inspection by appointment. Price Price on request (EXW Denmark)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52181, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Bwjdpfewna R Sjx Aa Nji The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52178, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Bwedpfewna N Usx Aa Noi Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 52177, Year of construction: 2013, operating hours: 40,000 h, Stratasys 3D printer. Printer purchased in March 2013 (original price: €120,000). Maintenance regularly performed by Stratasys. Bodpjwna Nnjfx Aa Newi The machines are in top condition and fully functional. All printheads are in the printer. Machines ready for pickup.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, 3D Systems Projet 3500HDMax 3D Printer - bought in 2013, good condition, functional. Bjdpfx Ajwnbd Hsa Nowi

Condition: used, functionality: limited functionality, Year of construction: 2013, Projet 3500HD Max 3D printer, in need of maintenance. Bwsdownbciepfx Aa Noi

Condition: repair required (used), functionality: limited functionality, Year of construction: 2013, Printer Projet 3500HD Max 3D printer, maintenance necessary and in need of repair. Bwsdpownbb Ejfx Aa Noi

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, GEA CRAFTSTAR 40HL - 50HL BREWHOUSE FULLY AUTOMATED - SIEMENS CONTROLS SKID MOUNTED DESIGN FOR EASY TRANSPORT 7 BREWS PER DAY YEAR 2019 CONDITION: EXCELLENT LOCATION: LONDON Bwodpfxowh Nt Ns Aa Nji YEAST PROPAGATION PLANT INCLUDED

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER Bwedpfxjtraaae Aa Nei • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: excellent (used), Year of construction: 2010, 200hl Steinecker Krones Brewhouse. Capable of 6 brews per day. Location: UK Available Immediately Including: • Steinecker Mill • Steinecker Cereal Cooker • Steinecker Mash Vessel • Steinecker Lauter Tun • Steinecker Holding Vessel • Steinecker Lauter Worth Heater • Steinecker Copper • Steinecker Whirlpool Bwodpfxoxb Uz Ae Aa Nji • Steinecker Wort Cooler • HLT & CLT • Hop Pellets Station • Vapour Condenser • Condensate Cooler • Spent Grain System Contact Indassol UK for Pricing and more details. We are at Drinktec - Please reply to set up a meeting to discuss further.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Bsdpet Uim Hefx Aa Njwi Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: good (used), Manufacturer: EPSON Type: SureColor T5200 Resolution: 2,880 x 1,440 Max. format: DIN A0 Bwsdsvg U E Ajpfx Aa Nei Max. Print format: 841 x 1,189 mm Features: network-compatible Print function: borderless printing cartridges: Single color cartridges Display type: LCD display Display size: 63 mm Memory size: 256 MB

Condition: excellent (used), Eos EOS P 396 | PSW 3.8 – Industrial 3D Printer (Laser Sintering System, SLS, CO₂ Laser) The machine has been serviced regularly (last service: 08/2024). It has exclusively processed PA11 (EOS PA1101). The system is offered including accessories: 1 x build box, docking station, multibox with cooler Operating hours: 5,962.3 h "The printer has been equipped with a new IntelliScan III scanner including a laser deflection head and has been thoroughly inspected." For sale is an EOS P 396 with PSW 3.8, a high-precision industrial system for additive manufacturing (Selective Laser Sintering, SLS). The system is suitable for the production of complex plastic components for both series and prototype manufacturing. Base machine with control cabinet & control terminal Bjdpfx Aaexw Uyqe Nowi Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set: PA 2200 Balance Cooling system (termotek): Cooling capacity: 1,400 W at 20°C water / 18°C process water Pump capacity: 5 l/min at 3.5 bar Electrical power: 230 V, 50/60 Hz, 7.5 A Refrigerant: R134a (max. charge: 420 g) Multibox is a typical EOS accessory for powder handling, used for transporting and interim storage of material. Technical Data: Laser and Optics: Laser type: CO₂ laser Rated power: 70 W Wavelength: 10.55 – 10.63 μm Laser safety class: 1 (closed) / 4 (open) Focused beam diameter: approx. 0.6 mm Heated F-theta lens, focal length: 500 mm High-speed galvanometer scanner with temperature compensation Exposure area: 350 × 350 mm Beam deflection speed: max. 6 m/s Mechanics & Build Volume: Build chamber: 350 × 350 × 620 mm X-axis (coater): Travel 690 mm, speed max. 200 mm/s Z-axis (build platform): Travel 650 mm, speed max. 6 mm/s, resolution 0.01 mm Powder dosing via grooved roller Heating Systems: Process chamber heating: 3.0 kW, infrared twin tube radiator with pyrometer control Take-off chamber heating: 1.6 kW, resistance heater coil with separate temperature measurement Control & Operation: Process computer with Windows 7 OS 15.1" TFT display, membrane keypad & mouse Ethernet network connection Other: Noise emission: < 70 dB(A) Electrical Data: Voltage: 400 V 3~/N/PE Frequency: 50 / 60 Hz Rated power: 10 kW Rated short-circuit current: 5 kA Current draw (full load): 16.0 A Line protection: 32 A Total weight: approx. 1,400 kg Condition: used Scope of delivery: (see picture) Base machine with control cabinet & control terminal Exchangeable frame with build platform Blade cassette II (blue) Software: Windows 7 Process software (PSW) EOSTATE Basic Parameter set PA 2200 Balance Cooling system (termotek) Multibox (Specifications and information are subject to change and correction!) For further questions, please feel free to contact us by phone.

Condition: used, input voltage: 240 V, HP Large-Format Inkjet 4-Color Multifunction Plotter Printer Type F9A30A Print/Scan/Copy Touchscreen Print sizes A1, A2, A3, A4 Bwodjyipt Depfx Aa Nsi Print speed A1 format: 25 sec./page or 81 prints/hour

Condition: excellent (used), Year of construction: 2007, For sale is a Dimension BST 3D printing center with serial number P1588. The center was used as a test center Interior component Table 203x203x305 mm Nozzle head computer controlled Material cassette automatically reloadable Technical data Dimension dimensions 686x1041x914 (WxHxD) Weight 136 kg Max construction volume 203x203x305 Electrical connection 230V, 60hz, 15A Accessories: - power cord - 20 material cassettes - instruction manual - Basic training manual - Div Software Bjdpfxsh Uc Iqo Aa Nswi - 29 Table tops Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible!

Condition: excellent (used), functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. Bwodovu Syyepfx Aa Nei TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Year of construction: 1990, condition: ready for operation (used), A complete nonwoven fabric production line including peripheral equipment and a complete pre-blending line is available. 1) Pre-blending line with carding opener Houget Duesberg Bosson, year of construction: 1972, working width: 1500mm, drum: 1, worker-stripper pairs: 3, doffer: 1, feed rollers: 2, total line dimensions X/Y/Z: approx. 11000mm/1800mm/3100mm, operating hours: approx. 16414h, including feed table and bale opener. 2) Filling chute Spinnbau Bremen, year of construction: 1989, machine dimensions X/Y/Z: approx. 4000mm/2600mm/6250mm. 3) Weighing conveyor with vibrating chute Protec. 4) Card Hergeth, year of construction: 1990, working width: 2500mm, feed rollers: 2, feed roller diameter: 94mm, licker-in roller diameter: 413mm/550mm, worker-stripper roller diameter: 219mm/123mm, transfer roller diameter: 550mm, main cylinder diameter: 1500mm, doffer diameter: 850mm, compaction roller diameter: 260mm, pressure roller diameter: 2500mm. 5) Crosslapper Autefa Topliner CL 4000/4002 - WebMax, year of construction: 2006, min. fineness range: 0.7dtex, fiber types: chemical/natural/regenerated/blends, max. web weight: 100g/m², max. web weight with crosslapper: 5000g/m², max. laying width: 3500mm, working width: 2500mm, max. laying speed: 130m/min, lapper lift: 100mm, machine dimensions X/Y/Z: approx. 3850mm/8800mm/2200mm. 6) Drafting unit, working width: 2500mm, machine dimensions X/Y/Z: approx. 1600mm/3650mm/1650mm. 7) Double needle loom Dilo CBF 31/HVSL 31, year of construction: 2007, max. working width: 3100mm, stroke frequency: 1375/min, needle beam stroke: 60mm, horizontal beam stroke range: 0mm-6mm, number of needles per 1m working width: approx. 15430, machine dimensions X/Y/Z: approx. 3350mm/5150mm/4500mm, weight: approx. 38000kg. 8) Web accumulator Suchy WOB 3200, storage volume: 40m³, web weight range: 50g-2000g/m², max. working speed: 40m/min, max. production speed: 20m/min, working width range: 1000mm/3000mm, roller top width: 3200mm, machine dimensions X/Y/Z: approx. 4300mm/5050mm/5300mm. 9) Slitting unit Suchy, year of construction: 2006, weight: approx. 250kg. 10) Climbing roll winder, winding roller diameter: 350mm, min. winding diameter: 3inch, max. winding diameter: 1500mm. 11) Edge trimmer Hepp-Schwamborn. 12) X-ray measuring device Protagon Q6. This is a complete and automated nonwoven fabric production line starting from fiber bales. Documentation available. An on-site inspection is possible. Expected to be available from the end of March 2026. Bwedpfx Ajymfc Aea Nsi

Year of construction: 1989, condition: ready for operation (used), A stencil screen printing machine Ekra is available. Frame dimensions X/Y: 800mm/570mm, print dimensions X/Y: 500mm/390mm, print speed: 110mm/s, positioning accuracy: +/-0.02mm, squeegee pressure: 320N, table adjustment X/Y: +/-8mm, max. print material thickness: 40mm, machine dimensions X/Y/Z: approx. 1300mm/1050mm/1350mm, weight: approx. 350kg. Documentation available. An on-site inspection is possible. Bsdpfx Aaoymfdmj Nswi

Condition: excellent (used), Year of construction: 2016, Inca Onset X2, 3/4 automized Color configuration: 8 channel printer with four colours (CMYK) Bedpfx Aasun Swbe Nswi 1/12th of the new price !!!!! Printhead status allowing to print at maximum speed with outstanding quality, up to 140 beds per hour/700m² per hour, needs replacement of 60 heads (circa 45.000€) The machine is in excellent shape, serviced by manufacturer since day number one. Annual maintenance done in May 2025. Available: January 2026 As the business expands, Onset X2 provides the capacity to extend the range of jobs companies can handle. The addition of a second set of CMYK delivers even higher productivity - up to 707m²/hr* (equivalent to 138 full-bed sheets/hr) - while an optional six channels can be populated with light cyan (Lc), light magenta (Lm), white (W) and orange (O) to add versatility and superb quality. A choice of uni-directional, bi-directional and super high-quality print modes can be selected depending on the specific job requirements. * Based on an approximate 6 second material handling time. Decomissioning, transport, installation, training and warranty are included (in Europe) For further technical details please refer to enclosed data sheet.

Condition: good (used), Year of construction: 2012, Bystronic manual butyl extruder Type: BEZ Frame dimensions The following minimum and maximum dimensions for the frames to be processed must be observed: Minimum dimensions Maximum dimensions 70 mm 4,000 mm Leg length (HR = LR) 5.0 mm 12.0 mm Profile height (HP) 4.0 mm automatic up to 24 mm / manual up to 35 mm Bsdpfx Aaovzky Se Nowi S-IGL-2296

Condition: used, functionality: fully functional, In this offer you buy a used UV LED flatbed printer ‘Mimaki UJF-7151 plus II ’ Object of sale: 1 x Mimaki UJF-7151 plus II with the following equipment: from 06/2021 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing) may show. The device has been tested for function Packaging and shipping: Bwodpfx Aswfqbisa Nsi You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.