Used Profile Bending Machine for sale (66,999)

Condition: used, Year of construction: 2019, - 6 working spindles - max. working width 250 mm - feed rate 6 - 24 m/min used planing and profiling machine Manufacturer: HOMAG Type: Optimat LPP306 Year of construction: 2019 OPTIMAT LPP306 Planing and profiling machine with 6 working spindles. Workpiece width after processing: - min. 10 mm - max. 250 mm Workpiece height after processing: - min. 10 mm - max. 160 mm Control system: - PowerControl with powerTouch LPP300 Infeed table 2,500 mm Feed rate min. 6 m/min max. 24 m/min FIRST LOWER SPINDLE: - Spindle motor power 7.5 kW - Siemens IE3 energy-saving motor Power speed range: - 7.5 kW - 6,000 rpm Spindle diameter 40 mm Spindle length 281 mm FIRST RIGHT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 176 mm FIRST LEFT SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Tedpfx Anozuzf Uolob Spindle diameter 40 mm Spindle length: 176 mm Total length: 176 mm FIRST UPPER SPINDLE: - Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm SECOND UPPER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm SECOND LOWER SPINDLE: Spindle motor power 7.5 kW, adjustable - Siemens IE3 energy-saving motor - Spindle speed continuously adjustable Power speed range: - 7.5 kW - 4,000 rpm - up to 8,000 rpm Spindle diameter 40 mm Spindle length 266 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Profiling machine Manufacturer: SCM Type: Superset NTE Year of construction: 2008 Technical data - Touchscreen control for the machine with 6 spindles + UNIWAVE - Spindle speed 8,300 rpm - Working width 240 mm, working height 125 mm, electronic - Touchscreen control MOBILE 10 - HSK 85S - SPINDLE QUICK-CHANGE SYSTEM T-SET - QUICK-CLAMPING DEVICE for tools - 7 shafts as a UNIWAVE, suitable for separating - 2 feed units after the upper spindles to reduce the center distance from 620 to 450 mm - Motor-driven feed roller in the working table, basic equipment for forced lubrication, electronic horizontal positioning, electronic adjustment of the tool diameter (setup) - Manual pump for lubricating the working table - WITH machining tool - Min. working width (finished size) mm 15 - Max. working width (finished size) mm 240 - Min. length of the individual workpiece mm 450 - Feed speed controlled via inverter 6 - 36 m/min, feed motor power kW 4 - Motor power surfacing spindle kW 7.5, quick-clamping device - Motor power vertical spindle right kW 7.5, Powerlock HSK 85 - Motor power vertical spindle left kW 7.5, Powerlock HSK 85 - Motor power upper horizontal spindle kW 7.5, quick-clamping device - Motor power 2nd upper horizontal spindle kW 7.5, Powerlock HSK 85 - Motor power lower horizontal spindle kW 7.5, Powerlock HSK 85 Tedszuzfhopfx Anlsb - Motor power universal spindle kW 7.5, quick-clamping device - Spindle speed rpm 6000/8300 - Spindle diameter mm 40 - Spindle receiving length vertical mm 220 - Spindle receiving length horizontal mm 250 - Axial adjustment range of the vertical spindles standard mm 75 - Axial adjustment range of the horizontal spindles standard mm 45 min. max. - Sweeping circle diameter of the surfacing cutter mm 120/140 mm min. max. - Sweeping circle diameter of the profiling spindles mm 100/200 - Profiling depth of the 2nd lower shaft with a tool diameter of mm 200 mm 15 - Diameter of the spindle cylinders mm 120 - Diameter of the feed rollers mm 140 - Infeed table length mm 2500 - Adjustment range of the infeed table and infeed fence 10 mm - Motor-driven feed roller in the outfeed table - Manual central lubrication - On/off switch for the feed unit before the surfacing cutter - Horizontal pressure pads before the surfacing cutter with on/off switch - Pressure shoes at the front on the protective cover of the horizontal spindle(s), hardened insert in the working table in front of the surfacing cutter - Pneumatic pressure shoes in front of the upper horizontal spindles - Horizontal pressure device in front of the surfacing cutter, can be switched on from the control panel - 2 feed rollers 140 x 25 per feed shaft - Lighting inside the protective cover - Extraction capacity min. 10,443 m3/h - Including extraction hood! - Including Powerlock mounting bracket - All 240 mm heads, horizontally arranged, and fixed tools on HSK spindles are included. - Spare parts catalog: Complete, 8 PDF catalogs available Note: Not all tools shown are part of this offer. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, Profiling line, consisting of DEP Gabbiani + Weinig planing machine DEP Manufacturer: Gabbiani Type: T-Module 80/1600 Year of manufacture: 1997 Planing machine Manufacturer: Weinig Type: 22 BL Year of manufacture: 1995 Technical data of the DEP - 6 machining motors per side - 2 fixed scoring units, 3.2 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 chip-removing units: 12.5 HP / 3000 + 4500 RPM - 2 slotting units: 12.5 HP / 3000 + 4500 RPM - 2 free spaces Tsdpfx Anszuzfboljb - 1 feed motor: 4 HP / 1400 RPM Angle transfer between DEP and planing machine - Length: 290 - 1600 mm (1800 mm) - Width: 18 - 150 mm - Thickness: 5.5 - 50 mm - Density: 600 kg/m³ - Output max.: 150 workpieces/min - Belt conveyor after the double-end profiler - Toothed belt conveyor with brush attachment as counter holder - Cam conveyor for singulation - Toothed belt conveyor as buffer section - Longitudinal discharge - Roller conveyor before the planing machine - Control: Vipa, compatible with Siemens S7 300 - Safety technology Protective door switches: 3 Safety light barriers: 1 Technical data of the planing machine Working width and working height - Working width: 20 - 230 mm (with tool diameter 125 mm) - Working height: 9 - 140 mm (with tool diameter 125 mm) Infeed table - Length: 2000 mm - Adjustment range of the jointer table: 10 mm - Adjustment range of the fence: 10 mm Surfacing table - Length: 1200 mm - Adjustment range of the table: 10 mm - Adjustment range of the fence: 10 mm Jointer spindle - Motor power: 5.5 - 15 kW Thicknessing spindle - Motor power: 5.5 - 11 kW Left spindle - Motor power: 5.5 - 11 kW 2. Right spindle - Motor power: 5.5 - 11 kW Top spindle - Motor power: 5.5 - 22 kW Bottom spindle - Motor power: 5.5 - 22 kW Universal spindle - Motor power: 5.5 - 11 kW Feed - Cardan feed, continuously adjustable: approx. 6-36 m/min - Motor power: 4 - 8.6 kW Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" Todpfx Ajzuzb Aonlsb - LCD-TFT color display - Touch screen version - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 90 mm, roller (top) diameter: 90 mm, side roll diameter: 90 mm, - Capacity 1050 x 3 mm - Roller diameter 90 mm - Conical bending - Swing-out upper roller - Brake motor - Foot control - Emergency stop Tsdpfxoq H D S Rj Anleb - Documentation - 400 V

Condition: good (used), Year of construction: 1996, overall weight: 1,000 kg, total length: 3,500 mm, total width: 1,000 mm, total height: 1,200 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulicbendingdriveoperatedbyhandlevervalve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Tsdpfst Dk Uksx Anleb Max.Tube Ø: 42mm Min. Tube Ø: 6mm Max. Wall thickness:3mm Max. Bending radius:5mm Min. Bending radius:180mm Max. bending length:2000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD Tedotr U Hlopfx Anleb → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, Year of construction: 2025, machine/vehicle number: B2202I0007, TruBend 3130 (3.2 m) (B38) – economical, precise, and future-proof all-around bending machine with 1300 kN pressing force, 3230 mm bending length, 615 mm installation height, and 445 mm stroke. Equipped with a C-frame, press beam with spherical bearing and press beam inclination, On-Demand Drive with 4-cylinder technology, length measuring system (Y-axis) with dynamic springback compensation, back gauge finger 1000 mm (2 pieces), hydraulic TRUMPF lower tool clamping system, control unit with foot pedal, hydraulic oil filling, tank heating, and E-Learning package Technology TruBend. With CNC-controlled wedge compensation and Touchpoint TruBend machine control including user management system, TRUMPF bending technology data, and control panel support arm on the left, which can be swiveled and tilted. Data transfer via USB, RJ-45, network capability, and remote support interface. Safety features include CE marking/EC Machinery Directive, sliding door at the rear, and side swing doors on the right/left. Extended standard equipment: BendGuard with block laser, 4-axis back gauge (X, R, Z1, and Z2 axes), manual TRUMPF upper tool clamping system, workshop programming TecZone Bend (trial), installation, commissioning, and training, support console 70, control cabinet air conditioning up to 35 °C, Smart View MT ready, and data usage agreement. Tedpfjzwnaqjx Anleb

Condition: used, Shearing force: 800 kN (punching e.g. 30 m in 20 mm steel) Cuts 350 x 16 mm on the flat metal shear Tjdpfx Asw Rvu Rjnleb Foot switch for lift release Support table on the punching side Range of tools is included in the price Excellent condition

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm Tsdeiivg Sepfx Anleb

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Tedpfx Ajt Akt Rjnlob Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Siemens, roller (bottom) diameter: 160 mm, roller (top) diameter: 175 mm, side roll diameter: 135 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness (max.): 7 mm, power: 4.4 kW (5.98 HP), input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: centralized greasing system, cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Electronically Controlled, Electrohydraulic Four-Roller Plate Bending Machine Manufacturer: FACCIN, Model 4 EDL 1617 Technical Specifications: Number of rollers: Four Geometry of side rollers: Linear guides Working width: 1500 mm Top roller diameter: 175 mm Bottom roller diameter: 160 mm Side roller diameter: 135 mm Pressing force against top roller: 80 tons Guaranteed installed power: 4.4 kW (6 HP) Guaranteed maximum rotation speed: 0–10 m/min Guaranteed machine weight: 3,150 kg Length: 3,300 mm Width: 1,170 mm Height: 1,100 mm Guaranteed Performance: For material with yield strength 260 N/mm² Rolling capacity (full working width): 7 mm Pre-bending capacity (full working width): 6 mm From pipe diameter: 875 mm Rolling capacity (full working width): 5 mm Pre-bending capacity (full working width): 5 mm Tedpfxewwt Ddo Anleb From pipe diameter: 225 mm Standard Equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for roller rotation Extra heavy-duty, double-support swing bearing Electronic Parallelism System EPS Hardened rollers for high wear resistance All rollers ground after heat treatment Siemens PLC control system Electric drive for top roller for increased efficiency Safety trip wire with emergency stop and CE certification Centralized lubrication Cone bending device Optional Equipment Included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting Tsdpegd T R Defx Anlob

Condition: new, functionality: fully functional, Year of construction: 2026, Electronically controlled, hydraulic four-roller bending machine Make FACCIN, model 4 HEL/S 2122 Technical specifications: Number of Reels: Four Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 225 mm Lower roller diameter: 215 mm Side roller diameter: 165 mm Pressure force against the top roller: 100 tons Guaranteed installed power: 9.2 kW (12.5 hp) Guaranteed maximum turning speed: 4-8 m/min Guaranteed machine weight: 4,450 kg Length: 3,500mm Width: 1,200mm Height: 1,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 11 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,100 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6 mm from pipe diameter 286 mm Standard equipment: Double linear guide system for roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged folding bearing Tjdpfod Eqg Hjx Anljb Electronic parallelism system EPS Hardened rollers for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device Optional equipment included: CNC control PGS-ABSOLUTE

Condition: new, functionality: fully functional, Year of construction: 2026, Mechanical asymmetrical three-roller bending machine with pre-bending Make FACCIN, model ASI 2015 Guaranteed services: Sheet thickness rolls at 750 mm diameter 5 mm Sheet thickness bending at 750 mm diameter 4 mm Sheet thickness rollers with 195 mm diameter 4 mm Sheet thickness bending at 195 mm diameter 3 mm Performance data refer to steel with a yield point of 240 N/mm² and a strength of 370 N/mm² Technical specifications: Working length 2,000 mm Top roller diameter 150 mm Bottom roller diameter 150 mm Tjdpfxecuxpqo Anlob Side roller diameter 150 mm Installed power 4.3 kW rolling speed 4 m/min Length 3,300 mm Width 750mm Height 1,200 mm Weight 2,136 kg Standard equipment: All rolls forged and inductively hardened Both central rollers driven Safety control with immediate stop of all machine movements Machine stand stands on frame carrier made of welded construction. This ensures optimum stability and reliability of the machine. Optimum power transmission in the machine stand through long guides with straight-line positioning movement of the bending rollers. (No curved adjustment movement and therefore no torsional forces in the machine stand) Digital display for the position display of the side roll motorized adjustment of the side roll brake motor for rotation and side roll movement Cone bending device with hardened stop block Emergency stop trip wire around the machine Machine with CE certification and documentation

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulic two-roller bending machine Guaranteed capacities: Sheet thickness Bending with material 260 N/mm² Yield point: 2 mm Sheet thickness bending with material AISI 304-316 stainless steel: 1.5 mm Cycle time per part: 15 seconds Todpjc S N Riofx Anljb Technical specifications: Working length: 1000 mm Installed power: 5.5 kW Rolling speed: 7 m/min immediately available from the factory!

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Tedpfx Anscuxp Tjlob Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Mobile control panel

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Tsdpfxjc S N Nqs Anlsb Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: used, Year of construction: 2021, controller model: , _____ Description: Year of manuf. : 2021 TruBend Center 5030 Tjdpszxkyvefx Anlsb :- Robust machine frame : - Angular direct drive :- Crowning system :- Machine control with touchscreen operation :- TecZone Fold programming – floating licence :- 2-axis part manipulator with suction modules :- 5-axis backgauge :- Optical angle assistant :- ToolMaster :- Hold-down tools :- OBW90 and UBW90 bending tools Technical specifications Minimum bending depth (standard tool):145 mm Minimum bending depth (with additional hold-down tool):40 mm Maximum bending length:3,123 mm Minimum bending length:80 mm Hold-down force:101 t Maximum box height:220 mm Minimum material thickness:0.4 mm Maximum steel material thickness:3 mm Maximum stainless steel material thickness:2.2 mm Maximum aluminium material thickness:4 mm Rapid traverse Y-axis (press beam):250 mm/s 5-axis backgauge:1,700 mm/s ToolMaster Bend:2,400 mm/s Dimensions and weight:6,500 x 3,150 x 2,995 mm / 26,000 kg Features :- ACB Laser :- DMC Bluetooth 2D barcode scanner :- Set of 3-surface suction modules (12 pieces) :- Support brackets (2 pieces) :- Additional hold-down tool function (ENW) :- Additional bending tool function (ZBW) :- ENW110-50 – Length 3,123 mm :- ZBW400 – Length 940 mm

Condition: good (used), functionality: fully functional, *Description* Hydraulic shear and punch press *GEKA model HYD 50-S* No. 3497. Versatile 5-station machine, ideal for cutting and punching steel profiles. Robust machine, visible and in working order. *Technical Specifications* - *Brand / Model*: GEKA HYDROCROP HYD 50-S - *Machine No.*: 3497 - *Punching force*: 50 tons - *Bending force*: 50 tons *Capacities with standard blades* - *Angle iron*: 120 x 120 x 10 mm at 90° - *Flat bar*: 300 x 15 mm - *Round bar*: Ø 40 mm - *Square bar*: 40 x 40 mm - *Punching*: Ø28 x 13 mm thickness *Special Equipment* - *Bending*: 200 x 15 mm - *Notching*: 250 x 250 x 6 mm - *Shear for UPN/UPE*: 100 mm - *Shear for IPN/IPE*: 100 mm Tedpfxjzt Swls Anlob *Condition* Complete machine with stations: punching, flat/angle/round/square shearing, bending, notching. Sold with punches. Heavy weight, mounted on a steel base.

Condition: used, Year of construction: 2007, machine/vehicle number: 5007, Item No. 26241 Hydraulic CNC pipe bending machine Technical data: - Bending capacity, mandrel bending, steel up to Ø 60 x 4 mm - Bending capacity, mandrel bending, stainless steel up to Ø 60 x 2.6 mm - Mandrel bending unit, bending length up to 6000 mm - Max. bending angle 0 - 180° - Overbending +10° - Largest average bending radius 230 mm - Smallest inner bending radius 1.5 x D 34 mm - Automatic pipe feed with controlled rotation unit - Drive 400 V / 7.5 kW - Space requirement approx. W 7500 x H 1200 x D 1300 mm - Weight approx. 1800 kg including: - Bending angle programming Tjdpfxszxc Avj Anljb - Digital bending angle display + fine adjustment of bending angle - Various bending tools, approx. Ø 26.9 RM 40 + 54; Ø 26.9 RM 54; - Ø 33.7 RM 67, Ø 42.4 RM 60 + 85, Ø 48.3 RM 96, - Ø 60 RM 120, Ø 40 RM 170, Ø 22 RM 33

Condition: used, Year of construction: 1999, sheet width 2050 mm plate thickness 4 mm total power requirement 3 kW Tsdpfoztfxiex Anlsb weight of the machine ca. 2 t

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, STC-Ref:G-022-7715 Heidelberg Plattenabkante // Platebender, Year: 2008 Tjdpezcuzyjfx Anljb equipped: - suitable for Heidelberg SM / CD - Plate bender --> available: immediately, in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Todpfszn Rdmox Anljb Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, overall weight: 1,600 kg, Equipment: documentation/manual, EMMEGI Phantomatic 3400 Machine No. 268896 Vertical profile machining center with 3 controlled axes Processing of steel / stainless steel / aluminum / plastic Data for profile machining center: Phantomatic 3400 Year of manufacture: 2002 Length approx. 3.80 m Maximum bar processing length: 6.80 m Height approx. 1.80 m Depth: Speed: Power: 7.5 kW / 16A Total: approx. 1500 kg Weight approx. 1 ton Accessories: various tool holders / collets Condition: used, functional / overhauled, see video Processes materials made of PVC, aluminum, and steel (wall thickness up to 3 mm). Technical data: X-axis travel: 2400/3400 mm Y-axis travel: 240 mm Z-axis travel: 230 mm Motor spindle: 5.5 kW Speed: 18,000 rpm Tool change: manual Tool holder: ISO 30 Power supply: 380 V / 16A Tedszvf A Topfx Anleb Weight approx.: 1000 kg Further data, see image data sheet. The machine is still connected to power and can be inspected by appointment.