Used Profile Machining Center for sale (70,374)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 600876262, We hereby offer this used Deckel Maho HSC 105 Linear vertical machining center from 2008, located in The Netherlands. Equipped with the advanced Siemens 840D ERGOline control unit, it ensures intuitive operation and seamless programming. With a working area of 1200 x 850 mm, it accommodates a wide range of workpieces, making it ideal for demanding applications. The 18,000 rpm spindle speed delivers exceptional cutting performance, while the 35/25 kW motor power provides the strength needed for efficient and accurate machining in both light and heavy-duty operations. Advantages: High-Speed Machining. Powerful Motor. Large Working Area. Dkjdpfx Aexqh E Tjdasw Advanced Control System. Precision Engineering.

Condition: good (used), Year of construction: 2020, operating hours: 22,000 h, functionality: fully functional, machine/vehicle number: 2080594, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, operating hours of spindle: 9,500 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C system Total connected load: 133 kVA Power factor: 0.6 Protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool Magazine Tool change system: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed Drives Drive type: Three-phase synchronous motors Travel measuring system X/Y/Z: Direct, absolute X Axes (X1 and X2) Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 2 × 10,000 N Continuous force: 2 × 5,000 N Positioning accuracy: Tp = 0.008 mm Y Axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z Axes (Z1 and Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin-spindle configuration Motor spindles, liquid-cooled, synchronous drive Spindle diameter: 40 mm Tool interface: HSK-A63 Lubrication: Minimal quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (rated torque) Machining Area Spindle distance: 600 mm Dodpfjxt D Ezsx Adaokw Travel Paths: - X axis: 600 mm - Y axis: 600 mm (optionally 875 mm) - Z axis: 500 mm Workpiece Clamping / Table System Swiveling mount with two separate rotary tables for installation of clamping bridges Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Maximum workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table rotation speed: 50 rpm Angular acceleration: 2.5 – 10 rev/s² Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. loading moment: 500 Nm Tool Change Times Chip-to-chip for n < 10,000 rpm: > 2.75 s Chip-to-chip for n < 17,500 rpm: > 3.15 s Note The system is delivered without product-specific tools, fixtures, or robot grippers.

Condition: used, Year of construction: 2010, x-travel 2.600 mm y-travel 700 mm z-travel 700 mm control SIN 840 D Siemens B - axis +/- 110 x 0,001 ° C-axis 360 x 0,001 ° feed X/Y/Z-axis 1 - 20.000 mm/min rapid traverse X/Y/Z 40,00 m/min spindle turning speed - stepless 20 - 8.000 U/min tool taper SK40 power capacity at 100 % load 13,50 kW power capacity at 25 % load 23,50 kW max. torque at 10% load 85,00 Nm max. torque at 25% load 150,00 Nm table surface area 2.920 x 740 mm number of T-slots 7 T-slot - distance 100 mm T-slots 1x 18H7 / 6x 18H12 integrated rotary-table 750 mm table load of rotary table max. 500 kg tool magazin: 60 tool diameter 80,00 mm wotkpiece diameter with 2 vacant positions 130 mm tool length - max. 300 mm weight of tools max. 6,00 kg total power requirement 57 kW weight of the machine ca. 15,5 t dimensions of the machine ca. 10,50 x 6,60 x H2,70 m Dsdpfjw E Nnusx Adajkw 5-axis simultaneous machining center with SIEMENS SINUMERIK 840D control, ShopMill user interface, chip conveyor, coolant system, exhauster, coolant through the spindle, twin table machining possible – partition wall, electron. handwheel, TS649 measuring probe, Renishaw TRS2 tool breakage detection, swivel milling head B-axis, NC rotary table C-axis. Milling spindle new in 10/2019 Guides and ball screws new in 01/2023

Condition: used, Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, controller manufacturer: HEIDENHAIN, CONTROLS .. CNC controls. HEIDENHAIN WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 500 mm .. Y-axis travel: 400 mm .. Z-axis travel: 400 mm TABLE .. table surface (left-right): 700 mm .. table surface (front-back): 500 mm Dkjdpfx Adjxu Ahweaew SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 TOOL MAGAZINE .. number of positions: 16 DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5000 mm .. space requirements -front/back-: 3700 mm .. total height: 2500 mm .. total weight approx.: 4500 kg 4726 spindle hours, 10,000 operating hours

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: AA100001570, travel distance Z-axis: 180 mm, table width: 1,620 mm, table length: 5,510 mm, rapid traverse X-axis: 56 m/min, rapid traverse Y-axis: 56 m/min, TECHNICAL DETAILS Processing table dimensions (L x W): 5,510 x 1,620 mm Z-axis travel distance: 180 mm Maximum vectorial rapid traverse speed X/Y-axis: 56 m/min Spindle unit speed: 4,000 rpm Tool changer slots: 44 Connection diameter: 250 mm MACHINE DETAILS Dimensions & Weight Dimensions: 9,700 x 5,020 x 2,650 mm (LxWxH) Net weight: 5,000 kg Spindle unit motor power: 5.5 kW Air consumption: 4,430 m³/h Air velocity: 25 m/s Voltage: 400 V / 50 Hz EQUIPMENT PRO-Speed safety system TEPCAD control panel with touchscreen color display Linear tool changer TBR14 Linear tool changer FAST14 Air blower on the electrospindle XY-axis safety guard Vacuum pump 150/300 m³/h 5-axis unit ‘JQX’ version 13.5 kW Fixed pedestal: 145 x 145 H=75 mm Rotatable gondola: 145 x 55 H=75 mm Clamp for 8 rails TV FLEX / TV FLEXDRIVE / TV FLEXMATIC MULTIGRIP 90 round clamp (H83) for TV FLEX / TV FLEXMATIC Maestro connect 1 year (including Gateway Kit plug & play) SCM DIGITAL SOLUTIONS: MAESTRO CONNECT MAESTRO ACTIVE software for human-machine interface (HMI) Maestro software for CNC programming Dkedpfoxmgr Rox Adajw Hardware key for Maestro CNC Advanced Maestro 3D module Additional key for Maestro CNC (USB connection) Windows 10 embedded 64-bit operating system Console with integrated PC eye-M PRO

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 01-2142-071, controller manufacturer: ITALY - OSAI, controller model: OSAI, workpiece length (max.): 4,200 mm, workpiece width (max.): 2,100 mm, table width: 2,100 mm, table height: 20 mm, table length: 4,200 mm, overall weight: 6,000 kg, spindle speed (max.): 24,000 rpm, number of slots in tool magazine: 8, input voltage: 380 V, type of input current: three-phase, Used excellent conditions CNC nesting machine from AES WOODWORKING MACHINES. End user bought 2024 new Raptor Ultra and replaced this Raptor. *Model : RAPTOR 2142 *Heavy duty body and bridge frame *Dimensions Y : 4200 mm -- X : 2100 mm *Double working zone (extra cylinders have been located in working table for processing narrow parts) Dkedpfxoxrb S Ae Adajw *13V + 3*2 H +2 Saw blade Multi drill included * Vacuum pump & connections included *Tools are not included *OSAI controller included *PC in the cabinet has beed updated on 12/2023 Machine was working properly in customer production plant, processing pictures and videos available. Please do not hesitate contact with us.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical Data: Machine Type: - DMU 50 eVo Linear 5-Axis Simultaneous Machining Center - Year of manufacture: 2005 - Travel paths: X-500mm, Y-450mm, Z-400mm Control: - CNC control: Siemens 840D (ShopMill) - Electronic handwheel - 3D probing system Spindle: - Tool holder: SK40 - Speed range: max. 18,000 rpm Dkedpoxt T Ncsfx Adaew Tool Magazine: - Automatic tool changer with 30 magazine slots Table Type: NC swivel rotary table - B-axis: -5° to +110° - C-axis: 360° Coolant: - External coolant supply Operating Hours: - Machine power-on: 23,677 - Spindle running: 7,994 Availability: - Immediate Accessories: - 1 hydraulic vise (see picture) - 30 SK40 tool holders (tool changer fully equipped) Special Features: - Machine can be inspected and tested under power on site.

Condition: used, Year of construction: 2020, operating hours: 23,000 h, functionality: fully functional, machine/vehicle number: 2630079, travel distance X-axis: 800 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 650 mm, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, controller manufacturer: Siemens, controller model: 840D sl, workpiece diameter (max.): 1,830 mm, workpiece weight (max.): 800 kg, rotational speed (max.): 40 rpm, overall weight: 28,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 17,500 rpm, operating hours of spindle: 11,000 h, distance between spindles: 800 mm, number of spindles: 2, number of slots in tool magazine: 84, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This high-precision twin-spindle machining center from the SW series is designed for maximum productivity in mass production, especially in the automotive and supplier industries. The machine features two symmetrically arranged motor spindles, a twin NC rotary carrier, and two direct drive rotary tables, enabling simultaneous 5-axis machining and parallel metal cutting operations. Equipped with a Siemens 840D sl CNC control, minimum quantity lubrication, high-dynamic feed drives, and an 84-position tool magazine, the system provides dynamic, precise, and energy-efficient machining processes. The compact design and pick-up capable tool system ensure short chip-to-chip times and high machine availability. This machine is ideal for demanding precision machining tasks such as housings, structural components, gear parts, and components made from aluminum, cast iron, and steel in high-volume production. CNC Control Dkodpfjxt D D Rsx Adajw SIEMENS 840D SL Electrical connection Supply voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 152 kVA Power factor: 0.6 Protection: 250 A gG (5 s) Weight Machine operating weight: 28,000 kg Transport weight: 24,500 kg Tool Magazine Tool change: Pick-up system Tool management: Fixed coded tool positions Capacity: 84 tools (2 × 42) Max. total tool weight: 400 kg Feed Drives Drive type: Three-phase synchronous motors Travel measurement system X/Y/Z: Direct, absolute X1- and X2-Axis Rapid traverse: 120 m/min Max. acceleration: 10 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Y-Axis Rapid traverse: 120 m/min Max. acceleration: 11 m/s² Kv factor: 6 Peak force: 20,000 N Continuous force: 10,000 N Positioning accuracy: Tp = 0.008 mm Z1- and Z2-Axis Rapid traverse: 120 m/min Max. acceleration: 20 m/s² Kv factor: 6 Peak force: 2 × 6,000 N Continuous force: 2 × 3,000 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle arrangement: Horizontal, twin spindles side by side Spindle diameter: 40 mm Tool interface: HSK-A63 Cooling: Liquid-cooled motor spindles Lubrication: Minimum quantity lubrication (oil) Mechanical clamping force: > 18 kN Wear limit: 16 kN Speed range: 1 – 17,500 rpm Acceleration time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (nominal torque) Machining Area Spindle distance: 800 mm Traverse paths: - X-axis: 800 mm - Y-axis: 900 mm (optional 1,200 mm) - Z-axis: 650 mm Difference coupled Z axes: < 1.0 mm Difference coupled X axes: < 1.0 mm Workpiece Clamping / Table System Twin rotary carrier (Q axis) with two direct drive NC rotary tables (A/U axes) Swivel time 0–180°: 5.0 s Max. asymmetric load: 1,600 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 800 kg Peak torque: 1,900 Nm Nominal torque: 1,300 Nm Max. table rotation speed: 40 rpm Tool Change Times: Chip-to-chip with n < 10,000 rpm: > 3.0 s Chip-to-chip with n < 17,500 rpm: > 3.15 s Note The system is supplied without product-specific tools, clamping devices or robot grippers.

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 0316, travel distance X-axis: 1,000 mm, Equipment: chip conveyor, Technical information - Okuma MC-600H General information Width: 4358 mm Depth: 12141 mm Height: 3310 mm Dkodpfxjwaw S Ds Adasw Machine weight: 17700 kg Brand: OKUMA Model: OSP 5020M Main drive Number of spindles: 1 Speed frequency of spindle: 5000 1/min Movement X-AXIS Movement: 1000 mm Y-AXIS Movement: 800 mm Z-AXIS Movement: 750 mm Tools Maximum weight: 25 kg Maximum tool diameter: ISO 50 MM Maximum tool length: 450 mm Media Main electrical connection: 380 V / 50 Hz / 3 P Power consumption: 43 kVA Swarf conveyor: Yes

Condition: used, Year of construction: 2005, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, controller manufacturer: SIEMENS, controller model: 840 D, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 500 mm .. Y-axis travel: 450 mm .. Z-axis travel: 400 mm .. rotating range B-axis from: 110 ° .. rotating range B-axis up to: -5 ° .. rotating range C-axis from: 0 ° Dodpfx Ajxun Dwodaskw .. rotating range C-axis up to: 360 ° TABLE .. table surface (left-right): 630 mm .. table surface (front-back): 500 mm .. clamping surface diameter: 630 mm .. workpiece load (max): 200 kg SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: ISO SK 40 .. drive power: 9 kW TOOL MAGAZINE .. number of positions: 16 .. tool diameter max.: 80 mm .. tool weight max.: 6 kg ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2000 mm .. total height: 2400 mm .. total weight approx.: 3700 kg ATTACHMENTS .. zero-point workholding system: yes Operating hours: 47,800 hours Spindle hours: 20,300 hours Equipment: - Unilock clamping plate - 2 vises - Exhaust filter

Condition: used, Year of construction: 1997, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Famup machining centre Type MCX 1000 Year 1997 CNC Fanuc GE O-M With rotary table/divider Dodpexnznpsfx Adaokw

Condition: used, Year of construction: 2010, x-travel 2000 mm y-travel 2000 mm z-travel 2000 mm Control SIN840D B - axis 360 x 0,001 ° A - axis -90 - +90 x 0,001 ° feed X/Y/Z/-axis 1 - 30000 mm/min rapid traverse X/Y/Z 30,00 m/min feed B-axis ° / min feed A-axis ° / min spindle turning speed - gearbox stage 1 1 - 1096 1/min spindle turning speed - gearbox stage 2 1096 - 6000 1/min power capacity 45,00 kW Dsdpoxvdq Aefx Adajkw tool taper HSK-A 100 max. torque on the spindle max.1250 Nm tool magazin: 207 + 10 tool length - max. 700 mm tool diameter 300 mm pallet size 2x 1000x1000 mm workpiece weight 5000 kg T-slots DIN650 T-slot - distance 100 mm T-slot - width 22 mm number of T-slots 1 + 8 total power requirement 100,00 kW dimensions of the machine ca. 13,00 x 8,00 x H4,50 m 5-axis simultaneous machining center with control SIEMENS SIN840D, measuring probe, chip conveyor, coolant system, coolant through the spindle, pallets with 5-fold media connection and clamping hydraulics, suction, swivel spindle A-axis 0-90 °, NC rotary table B-axis.

Condition: used, Year of construction: 2007, operating hours: 18,000 h, functionality: fully functional, machine/vehicle number: 0-250-21-0442, travel distance X-axis: 3,850 mm, travel distance Y-axis: 2,015 mm, travel distance Z-axis: 525 mm, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, feed length X-axis: 3,850 mm, feed length Y-axis: 2,015 mm, feed length Z-axis: 80 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 20 m/min, Equipment: documentation/manual, Sale of a CNC machining center that is fully operational and has been completely overhauled. Homag Weeke Venture 5 Optimat BHC 550 In 2024, extensive maintenance measures were carried out. The main spindle was completely refurbished. Additionally, a new UPS and a new vacuum pump were installed. The frequency converter was also replaced. The offer also includes a Flex 5 aggregate (not required for standard operations); however, this unit is non-functional but a repair quote is available. Specification sheet for the Weeke Venture 5 Optimat BHC 550 (year of manufacture: 2007) Main technical data Dimensions & Weight Length: approx. 6,350 mm | Width: approx. 2,550 mm | Height: approx. 2,450 mm | Weight: approx. 6,500 kg • Processing Area (X, Y, Z) X-axis approx. 3,250 mm | Y-axis approx. 1,300 mm | Z approx. 150 mm • Main Spindle Dksdoxrcf Depfx Adajw Power: 12 kW, liquid-cooled Tool holder: HSK-F63 Speed steplessly programmable from 1,250 to 24,000 rpm • Drilling Units & Milling o Vertical: 25 spindles (32 mm pitch), depths up to 38/55 mm, tool holder diameter 10 mm, max. drill diameter 35 mm o Horizontal: 4 spindles in X-direction, 2 in Y-direction (32 mm pitch), depths up to 38 mm, max. drill diameter 20 mm o Grooving/Sawing unit: swivels 90° in XY-direction, cutting depth up to 30 mm, up to 7,500 rpm, max. tool diameter 1 mm • Workpiece Clamping & Table o Pod and rail table or console table with 6 adjustable supports in X-direction, LED display for position o Suction cups: e.g., 12 vacuum suction cups or various tubeless versions o Vacuum pump: approx. 100 m³/h • Tool Changer & Control o Tool changer: 14 positions front (X-direction) and 8 positions rear (Y-direction) o Control: POWERCONTROL PC 85T (TFT 17″), WOODWOP 5.0 software, incl. MDE and production lists • Additional Equipment & Safety o FLEX-5 interface for sawing/milling/drilling o Tool picking function (Pick-Up), safety mats, safety fence/doors, barcode scanner, etc. Additional technical key data from supplementary sources for 2007 • Work area: X ≈ 3,250 mm · Y ≈ 1,220 mm · Z ≈ 125 mm • Tool slots: approx. 16 positions • Vertical drilling spindles: 12 units • Horizontal drilling spindles: 4 in X, 2 in Y • Main motor: 12 kW, HSK-F63, speed up to 24,000 rpm • Other equipment: Pod-and-rail table, positioning aids, crosshair laser, LED display, HOMAG POWER CONTROL, WOODWOP 5.0 software, safety mats, handheld terminal, UPS, CE marking

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, Technical Equipment / Features Working area: Clamping surface table 1: 850 x 1,500 mm Clamping surface table 2: 850 x 1,200 mm Max. table load: 1,000 kg Height-adjustable tables: 3 x 65 mm Travel distances: X-axis (longitudinal): 3,000 mm Y-axis (transverse): 800 mm Z-axis (vertical): 600 mm Feeds: X, Y, and Z axes, stepless: 5–32,000 mm/min Max. feed force X and Y axes: 10,000 N Max. feed force Z axis: 16,000 N Rapid traverse X/Y/Z: 32 m/min Working spindle: AC main drive, water-cooled Power S6-60% duty cycle: 26 kW Gear stages: 2 Stepless speed: 30–6,000 rpm Max. torque at 40% duty cycle: 650 Nm Tool holder: SK 50 – DIN 69871, Form A Dsdpfx Ajxrf Smjdajkw Spindle diameter in front bearing: 90 mm Max. drilling diameter: 100 mm Max. rigid tapping: M 40 Max. milling capacity: 600 cm³/min Tool changer: Traveling tool magazine on the gantry column Tool positions in traveling magazine: 52 Additional tool magazine: 83 positions Tool change time to spindle: approx. 5 s Chip-to-chip time: approx. 9 s Max. tool diameter: 180 / 120 mm Bridge tools: max. 250 x 180 mm Max. tool length: 400 mm Max. tool weight: 15 kg Tool swivel system for delivering tools from the magazine in a horizontal position for automatic use in angle, drilling, and milling heads CNC control: SIEMENS SINUMERIK 840 D Combined with digital drive control, hard disk storage, 15" TFT color monitor 1 GByte hard disk, external machine operator panel, full QWERTY keyboard Standard drilling and milling cycles Rigid tapping without compensating chuck Linear and circular interpolation Plane swivel, helical machining etc. Siemens tool management for tools and magazine Program input during machining Spindle power display Electronic handwheel USB interface UNISIGN diagnostic system Chip conveyor: Installed longitudinally under the table Ejection to the right Discharge height approx. 1,200 mm Integrated coolant tank with lifting pump Angle drilling and milling head: Angle drilling and milling head, automatic changeover via pick-up station Automatic positioning: 72 x 5° Stepless speed: 30–4,000 rpm Max. torque at 40% duty cycle: 650 Nm Power at 40% duty cycle: 26 kW Dimensions / Weight: Footprint without control cabinet: approx. 8.0 x 4.5 m Machine height: approx. 4.5 m Machine weight: approx. 20,000 kg Equipment: Full enclosure Wireless measuring probe, manufacturer M&H Angle milling head incl. pick-up station Coolant system with 2 cooling circuits and internal cooling through the spindle Chip conveyor Cooling unit for the spindle Various SK 50 tool holders

Condition: used, Year of construction: 2009, Busellato JET Optima C1 CNC Machine Description Manual centralized lubrication Extra 4 vacuum jig device Centralised dust hood with valves Tele service modem for remote control Safety system control 2 working areas +6 bars consols 1250 mm capacity 4 bars lifting device Extra kit Disc device for veneer panels to be install on zero lines reference stop Vacuum cup laser device 100 mt\3 vacuum pump Drilling head 18 bits with blade HSK electro Spindle 11kw 8 position linear tool holder on beam moving on X with electro spindle Djdpfjvw Uh Sjx Adaokw Fix extra position for aggregate tool holder Double zero lines Extra device 360° cn for electro spindle (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2007, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,016 mm, controller manufacturer: HAAS, CONTROLS .. CNC controls HAAS WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 3 .. X-axis travel: 3048 mm .. Y-axis travel: 1016 mm .. Z-axis travel: 762 mm TABLE .. table surface (left-right): 3048 mm .. table surface (front-back): 711 mm SPINDLE / HEAD .. drive power: 15 kW .. tool fixture: ISO SK 40 TOOL MAGAZINE Dedpfx Asxun A Todajkw .. magazin type: disc magazine .. number of positions: 24 ELECTRICAL SPECIFICATIONS .. total power consumption: 15 kW DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6528 mm .. space requirements -front/back-: 3531 mm .. total height: 3105 mm .. total weight approx.: 15368 kg ATTACHMENTS .. autom. tool clamping: yes .. chip conveyor: yes .. coolant unit: yes .. closed cabin: yes .. European CE standards: yes Under power A lot of tools Delivery to enduser 2008

Condition: new, FACTORY NEW MACHINING CENTER HEIDENHAIN TNC 640 CNC control HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 3,000 mm Z-axis: 2,000 mm Y-axis (outrigger): 1,300 mm V-axis (column): 1,000 mm Rotary table (C-axis): 2,000 x 2,000 mm Max. workpiece weight: 15,000 kg Automatic universal swivel head 1° x 1° Spindle taper: SK50 DIN 69871/A Djdpjhy Aunefx Adaskw Spindle speed: 6,000 rpm (oil-cooled) Max. spindle motor power: 53 kW ICS - internal coolant supply - 36 bar Rapid traverse X, Y, V & Z: 30,000 mm/min Positioning accuracy: ±0.015 mm Repeat accuracy: ±0.010 mm Tool changer: 60-position chain magazine Double hinged belt chip conveyor (longitudinal) Perimeter guarding (open at top) Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 2017, operating hours: 12,141 h, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller model: Heidenhain iTNC640, spindle speed (max.): 15,000 rpm, We offer in good condition Hermle C250U with following options: Heidenhain TS460 touchprobe Blum Laser Dedpfxoxqd S Nj Adajkw Internal coolant 40 bar with paperbelt filter Air true Spindle

Condition: like new (used), Year of construction: 2012, Bridgeport VMC 600 ECO Machining Center Bridgeport VMC 600 EC with Heidenhain ITNC 530 Control, Year of manufacture 2012, in excellent original condition. The machine comes from the training workshop of a renowned German engineering company. Tjbqsxqc Iceuwlfwjd CE compliant!! Technical Data: Year of manufacture: 2012 Condition: Good Control system: HEIDENHAIN ITNC 530 Travel in the X/Y/Z axes: 600/410/520 mm Rapid traverse in X/Y/Z axes: 40/40/20 m/min Table dimensions (L x W): 840 x 420 mm Maximum workpiece weight: 500 kg Maximum spindle speed: 8,000 rpm Minimum spindle speed: 40 rpm Spindle taper: BT 40 Spindle drive power: 8.5 kW Maximum tool length: 250 mm Maximum tool weight: 6 kg T-slot width: 18 mm T-slot spacing: 112 mm Positioning accuracy: ± 0.005 mm Repeat accuracy: ± 0.002 mm Power supply: 3x 400 V; 50 Hz Djdpfx Aoxtxk Sedaekw Dimensions (L x W x H): 2000 x 2050 x 2535 mm About the machine: Offered here is a Bridgeport VMC 600 EC machining center equipped with a Heidenhain ITNC 530 control system. This machining center is in excellent original condition. It comes from a facility where it was used sparingly for training purposes only. The control system is very user-friendly. The guides are lubricated regularly via the central lubrication system. The Bridgeport VMC 600 EC has been mechanically and electrically inspected by us. Take the opportunity to view and test the Bridgeport VMC 600 EC under power on site. You can find further milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2004, Model: COMET ISOLA ES381 V06 Dksdpfx Adjw Rfy Njaow Year: 2004 Control: ISAC ‘X’ axis Stroke: 7280mm ‘Y’ axis Stroke: 525mm ‘Z’ axis Stroke: 380mm Spindle Taper: ISO 40 Spindle Speeds: 24,000 RPM

Condition: new, FACTORY-NEW MACHINING CENTER HEIDENHAIN TNC 7 digital path control Dodpfx Aefdxhajdajkw HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 800 mm Y-axis: 700 mm Z-axis: 645 mm Table size (diameter): 500 mm Interference circle (diameter): 600 mm Max. workpiece weight: 300 kg Maximum spindle speed: 12,000 rpm (oil-cooled with MQL) Spindle taper: SK40-BIG PLUS (BVD 40) Maximum spindle motor power: 17 kW ICS – internal coolant supply – 20 bar Rapid traverse X, Y & Z: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Tool changer with double gripper: 30-position drum magazine (optionally up to 80 tools) Hinged belt chip conveyor Full enclosure Only inquiries from Germany will receive a response /// Nur Anfragen aus Deutschland werden bearbeitet

Condition: new, travel distance X-axis: 1,050 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece weight (max.): 700 kg, table width: 550 mm, table length: 1,150 mm, table load: 700 kg, overall weight: 8,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER Control and Drives: HEIDENHAIN TNC 7 digital path control Dksdpfx Ajh Ekq Dodasw HEIDENHAIN package (motors, measuring systems, handwheel) Additional Equipment: Preparation for 4th axis (rotary table) Full enclosure with side-folding viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered

Condition: new, travel distance X-axis: 1,620 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece weight (max.): 1,300 kg, table width: 620 mm, table length: 1,700 mm, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, overall weight: 11,000 kg, coolant supply: 20 bar, spindle motor power: 25 W, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 3-AXIS MACHINING CENTRE Control and Motors: HEIDENHAIN TNC 7 Digital Path Control Dsdpshy Atiefx Adajkw HEIDENHAIN package (motors, measuring systems, handwheel) Additional Equipment: Preparation for 4th Axis (rotary table) Full enclosure with side fold-up viewing windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered

Condition: new, travel distance X-axis: 1,200 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 620 mm, rapid traverse X-axis: 48,000 m/min, rapid traverse Y-axis: 48,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, workpiece weight (max.): 800 kg, table width: 600 mm, table length: 1,400 mm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, coolant supply: 20 bar, spindle motor power: 17 W, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW 3-AXIS MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, and handwheel) Additional equipment: Tool changer: 30 positions (optionally up to 60) Longitudinal hinge belt chip conveyor Djdpfxovn Eqxs Adaskw 4th axis preparation (rotary table) Full enclosure Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Only inquiries from Germany will be answered /// Only inquiries from Germany will be processed

Condition: new, travel distance X-axis: 850 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 640 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 7, table width: 460 mm, table length: 1,000 mm, table load: 400 kg, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, spindle nose: SK 40 BIG PLUS, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 150 mm, tool weight: 8 g, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, BRAND NEW MACHINING CENTER Control and Motors: HEIDENHAIN TNC 7 digital path control HEIDENHAIN package (motors, measuring systems, handwheel) Dkodpsm Tv Sbjfx Adasw IKZ: Internal coolant supply, 20 bar Additional equipment: Preparation for 4th axis (rotary table) Full enclosure with side folding inspection windows Accuracies: Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Only inquiries from Germany will be answered.