Used Profile Rolling Machine for sale (70,196)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Bedouz If Nepfx Abdjcw Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece. Bedjh A S Htepfx Abdocw

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Bjden Upglspfx Abdjcw

Condition: used, machine/vehicle number: 313/5, Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm Bcodpsd Sikfofx Abdsw -Price: complete -Weight: 22.5 kg

Condition: used, machine/vehicle number: 313/5, Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine -Rolls: 20 -Distance rings: 14 -Executions: different Bjdjd R N Icspfx Abdjcw -Take: Ø 28 mm -Price: complete -Weight: 21.4 kg

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Bsdpfx Aeltiy Tsbdjcw Type: RV16 Machinable cross-section: 120 x 140 mm Weight: 2,7 t

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 229, total width: 500 mm, total length: 600 mm, total height: 1,200 mm, number of straightening rollers: 5, Profile rolling machine: Rolling - Bending - Straightening / Profile dimensions as per attachment (see photo) Bcedpfx Absxrflmodew

Condition: used, Profile ring bending machine with manual crank drive, year of construction approx. 1950 Lower rollers Ø 56 mm with grippy knurling Lower roller width: 115 mm Upper roller Ø 100 mm Upper roller width: 110 mm - Symmetrical roller arrangement with 2 driven lower rollers Bodpfoxbtx Hjx Abdocw - Upper roller adjustment 55 mm via threaded spindle - Manual crank drive with 6:1 gear ratio Required space (L x W x H): 440 x 660 x 1000 mm Weight: approx. 200 kg

Condition: used, 3-Roller Ring Bending Machine CONZ Type UM 7-4 Motor no.: 1331455 Year built: ca. 1970 Roll diameter, drive roller: 60 mm Roll diameter, adjustment roller: 68 mm Roll width, drive roller: 145 mm Roll width, adjustment roller: 105 mm Bcjdpfx Aoxbtxyjbdsw Roll speed: 26 rpm Motor power: 0.75 kW Power supply: 380 Volt, 50 Hz - Forward and reverse rotation - Top roller without swing bearing - Parallel adjustment of the lower rollers via threaded spindle - Vertical adjustment of the top roller via threaded spindle from below Required space (L x W x H): 950 x 520 x 1200 mm Weight: 200 kg

Condition: like new (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 956158, control type: manual, number of rollers: 3, shaft diameter: 75 mm, overall weight: 1,300 kg, total length: 1,000 mm, total width: 1,130 mm, total height: 1,100 mm, power: 4 kW (5.44 HP), input voltage: 380 V, We can offer you a ROUNDO (Sweden) electro-hydraulic profile bending machine Model: R-3 Capacity: 14 cm³ Machine no.: 956158 Delivered to agent: 10-1995 Bedpfx Asxl Sq Ajbdjcw Delivered to customer: 26-07-1996 Dimensions: 1 x 1.13 x 1.1 m Weight: 1300 kg Shaft diameter: Ø 75 mm Motor power: 4 kW - Hydraulic machine - Can operate in horizontal or vertical position - 3 driven rolls Included: Brake motor Push-button control Digital readout 1 extra set of rolls for tube Ø 48 and Ø 42 mm Dutch-language manual Price for the ROUNDO section bending machine, model R-3: on request via email The machine has its original paint and has been used very little! Delivery conditions: Delivery time: available from stock, subject to prior sale Delivery: ex works Baarle-Nassau Payment: prior to collection Prices: net, excluding VAT Machinehandel De Leeuw BV is one of the few companies in Europe that trades and stocks mainly used Kardex Remstar VLM automatic lift (shuttle systems) & rotary storage systems (paternoster systems). See our website for current stock. We assemble and/or dismantle these systems safely with VCA-certified technicians and have been doing so for over 33 years. We also dismantle other brands such as: Hänel, Electrolux, Bertello, Megamat, Lista, Denocard Machinehandel De Leeuw BV Oordeelsestraat 7–B 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm Bcjdpfx Aed Naw Ajbdsw -Bore: Ø 49 mm -Quantity: 2 rolls available Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 Bcjdpoxzgnnsfx Abdsw 3 ROLLERS HORIZONTAL USED MACHINE INTERNAL CODE: SVR 370

Condition: good (used), comac Series 3000, Model 303 Heavy-Duty Profile Bending Machine | 3 Driven Rolls The Series 3000 – Model 303 is a powerful and precise profile bending machine designed for demanding industrial bending applications. With its robust construction, three driven rolls, and modular roll system, this machine is suitable for a wide range of profiles, pipes, and tubes. Equipped with a solid 3 kW motor, individually adjustable bending rolls, a free-standing remote control, and both vertical and horizontal operating modes, the 303 offers maximum flexibility and ease of use. The machine complies with the 2006/42/EC Machinery Directive and is built for long-lasting, trouble-free performance. Key features - Compliant with 2006/42/EC safety standards - 3 driven rolls for maximum grip and perfect material feed - Independently adjustable bending rolls for double pre-bending of symmetrical profiles - Lateral guide rolls with three-dimensional adjustment - Modular rolls suitable for most standard profiles - Alloy steel bending rolls, heat treated to 60 HRC - Free-standing safety remote control - Suitable for vertical and horizontal installation - One-piece steel frame for extreme stability - Torque limiter on the upper shaft - Shafts and gears mounted on rolling bearings for high dynamic loads - Spline-driven power transmission for optimal force transfer Technical Specifications - Shaft diameter: 50 mm (upper/lower) - Roll diameter: 180 mm - Motor power: 3 kW - Feed speed: 5.5 m/min - Weight: 720 kg Bending Capacities Profile Up to Minimum bending radius 60 × 10 mm – Ø 450 mm 25 × 5 mm – Ø 200 mm 80 × 20 mm – Ø 400 mm 32 × 32 mm – Ø 400 mm Ø 40 – Ø 400 mm Ø 60.3 × 2.9 – Ø 800 mm Ø 20 × 1.5 – Ø 220 mm Ø 48.3 × 4 – Ø 500 mm 60 × 30 × 2.5 – – 50 × 3 – – 60 × 6 – Ø 600 mm 30 × 4 – Ø 350 mm 50 × 5 – Ø 500 mm 30 × 4 – Ø 350 mm 60 × 60 × 7 – Ø 600 mm 50 × 50 × 6 – Ø 600 mm 70 × 70 × 8 – Ø 700 mm 80 × 45 – Ø 500 mm 70 × 40 – Ø 600 mm 80 × 42 – Ø 500 mm Bedpfx Absx A Ivisdocw

Condition: used, Roller sets for section bending machine, 3-roll ring bending machine HERKULES WETZLAR The rollers fit a section bending machine HERKULES WETZLAR type BO 238 N Shaft diameter: 60 mm with 18 mm keyway 2 rollers set No. 1, roller diameter = 110 mm, roller width = 180 mm 2 rollers set No. 2, roller diameter = 160 mm, roller width = 40 mm 3 rollers set No. 3, roller diameter = 150 mm, for tube diameter Ø 33 mm, roller width 87 / 115 mm Bcodpfx Aoglaq Isbdsw - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm without keyway The machine had 2 driven rollers Total weight of all rollers: 57 kg Good condition

Condition: used, DALLAN Rollforming machine | Omega profiles 60mm & 80 mm With 11 forming stations, fully equipped and currently set up for Omega 60 mm, the line includes additional tooling for Omega 80 mm profiles. This machine is complete, in excellent condition. DALLAN rollforming line with 11 forming stations: · Maximum sheet width: 300 - 350 mm · Controls: Dual console · Shaft diameter: 60 mm · End unit: Integrated cutting station · Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm · Idle decoiler Bedpfx Abjxugf Hedjcw · Tooling box (approx. 1,000 kg) for producing other profile types · Dimensions: 10,000 x 1,400 x 1,600 mm (L x W x H) · Weight: 10 tons Maximum sheet width: 300 - 350 mm Controls: Dual console Shaft diameter: 60 mm End unit: Integrated cutting station Current setup: Configured for classic Omega 60 mm, includes tooling for Omega 80 mm

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Bodpew A H T Aofx Abdjcw Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Good used ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Bcodpfxoyml Eks Abdsw Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm - Power of main motor: 7.5kw

Condition: excellent (used), workpiece diameter (max.): 30 mm, spindle diameter: 54 mm, roll diameter: 125 mm, spindle speed (max.): 224 rpm, spindle speed (min.): 40 rpm, roll width: 70 mm, Excellent Used Profiroll Bad Duben Model UPWS 10 ton Hydraulic Thread Rolling Machine with swivelling spindle for in-feed and thru-feed rolling Max rolling diameter: 30mm - Max thread length infeed rolling: 70mm - Max thread length thru-feed rolling: infinite Dia. of rolling spindles: 54mm - Max size of thread dies: 125mm dia x 70mm wide - 4 spindle speeds 40 to 224 rpm Bcjdpfx Ajymlx Dobdjw

Condition: used, total length: 1,000 mm, total width: 750 mm, total height: 1,400 mm, Empty weight: 400 kg Bedpfx Aeypk Ebjbdjcw - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 1.5 - Shaft diameter [mm]: 50 - Moment of resistance [cm³]: 6 - Top roll diameter [mm]: 50 - Bottom roll diameter [mm]: 50 - Capacity diameter round [mm]: 35 - Transport dimensions: 1000mm x 750mm x 1400mm (l x w x h) - Transport weight [kg]: 400kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 4,500 mm, total width: 900 mm, total height: 1,650 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 8419012 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.7 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 150 - Bottom roll diameter [mm]: 150 - Transport dimensions: 4500mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Bsdpjyn Abfefx Abdocw

Condition: used, Year of construction: 2016, total length: 4,400 mm, total width: 1,450 mm, total height: 1,300 mm, Empty weight: 5.200 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 210384 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 210 - Bottom roll diameter [mm]: 210 - Options: Cone rolling, Digital readout - Transport dimensions: 4400mm x 1450mm x 1300mm (l x w x h) - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Bedoyn Aanspfx Abdscw Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame Bcsdpfx Abjyn R Ugsdjw - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout - Optional lateral angle guides

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS 1984 Bcodpfx Abep R Rm Iedow

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Bsdpou Tg Spsfx Abdscw Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 70 mm, roller (top) diameter: 70 mm, side roll diameter: 70 mm, roller length: 1,050 mm, – Capacity 1050 x 1.8 mm – Bending capacity 1050 x 1.5 mm – Roll diameter 70 mm – Electrically adjustable rear roll – Digital display – Hardened rolls – Conical rolling – Swing-out upper roll – Brake motor Bjdpfx Aeyp E Sijbdecw – Foot control – Emergency stop – Documentation – 400V