Used Bar Machining Center for sale (76,215)

Condition: like new (used), Year of construction: 2012, operating hours: 5,607 h, functionality: fully functional, 2012 LEADWELL MCV 1500i+ (4 Axis) VMC Category: Vertical Machining Centers (VMC) Reference No.: 400140 Capacity: 1520 X 1016 X 720 MM Year of Construction: 2012 Technical Specification: SPINDLE Spindle Taper : CAT/BT 50 Spindle Speeds : 4000 RPM WORKING CAPACITY Table Size : 1550 x 1000 mm Travels (XYZ) : 1520 x 1016 x 720 mm Fgjdjx Ehibopfx Aanoi Spindle Nose to Table (Min.- Max.) : 120 - 840 mm ATC Tool Change Capacity : 24 Tools ATC Type : ARM CNC Control : Fanuc Oi-MD Additional Details: 12" 4th Axis

Year of construction: 2013, condition: used, 2013 Neway GVM 850 H CNC Machining Center with Fanuc 0i-MD Controller Fjdps Ahq Dmofx Aansgi X / Y / Z Axis Travel: 850 mm × 520 mm × 560 mm. Table Dimensions: 950 mm × 520 mm. Distance spindle to table: 150-710 mm. Maximum Table Load: 600 kg. Spindle Taper: BT40. Spindle Speed: 8,000 RPM. Spindle Motor Power: 7.5 kW continuous / 11 kW peak. Control System: Fanuc 0i-MD. Tool Magazine (ATC): 24-station arm-type. Rapid Traverse (X/Y): 30 m/min. Rapid Traverse (Z): 24 m/min. Note: Machine located in 32-640 Zator, Poland. Machine dimensions: 3672 x 2414 x 3000 mm. Machine Weight: 6,000 kg

Condition: excellent (used), Year of construction: 2018, 2018 Fanuc Robodrill D21MIB5 Twin Robot Machining Cell with (2) Fanuc Series 31I-Model B5 CNC Controls Fjdpfx Ajz E Sbrjanjgi Cell Comprising: Twin Fanuc Robodrill Type A04B-0104-B181 Vertical Milling & Drilling Machining Centres (S/Nos. P186ZG729 & P186ZG731). Table Size Approx 650mm x 400mm. Travel: 'X' Approx 500mm, 'Y' Approx 400mm, 'Z' Approx 330mm. Max Table Load 300kg. Number of Tool Pockets 21. Max Tool Length 250mm, Max Tool Weight 3kg. BT30 Spindle Taper. Max Spindle Speeds 10,000 RPM. Nikken TAT-170N (2018) Pneumatically Operated Rotary Support Table with 4th Axis Fanuc DDRiB-104-B181STD. ABB Flexloader SC3000XL Extended Conveyor Loading System (S/No. M180057-1) with Fanuc ABB 6 Axis Robot IRB 4600 & Fanuc ABB 6 Axis Feeder Robot IRB 1200 with Schunk Grab. Feed In/Feed Out Belt Conveyors. ABB Flexloader Vision. FSE E7326 Filtration, 950 Litre Capacity Coolant & Swarf Management System. Andreas Maier AMF 6906/61919 Hydraulic Equipment. This Cell Includes: Euro 250 Bowl Feeder on Stand with CVIC Digital Control. Desoutter ECS16-M20 Current Controlled Screwdriver. Robot Pendant ABB DSQC 679. Signal Tower Lights. Transformers. Weight of each Machining Centre Approx 2,400kg. Floor Space Required for Full Cell Approx 8,000mm x 6,500mm. 3 Phase Power Supply, 415 Volt. Fixtures Not Included. Swarf Bins Not Included. Viewing Recommended.

Condition: excellent (used), Year of construction: 2021, 2021 KIMLA BFN 1007 Linear CNC Gantry Milling Machine Fedpfx Aao Ahq Awonjgi Table: 1000 x 750 mm, Working travel: 1000/700/300 mm, Spindle rpm: 24000 rpm, Spindle power: 19 kW, Tool chuck: HSK63F, Tools magazine: 20 pieces, Control: CNC, S/No: 3626 (2021), Machine weight: 5600 kg, Note: ONLY 623 spindle hours. Note: Machine located in Wroclaw, Poland.

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Fgodez Ia U Ejpfx Aanoi Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: AA2/002546, functionality: fully functional, travel distance X-axis: 7,033 mm, travel distance Y-axis: 1,940 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 24,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of milling spindles: 1 Number of controlled axes: 5 Spindle speed: max. 8,000 rpm Main motor power: 11 kW C-axis: Available Tool holder: HSK-F63 Table design: Cantilever table Table length: 5,200 mm Table width: 1,300 mm Working area X-axis: 6,350 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Travel range X-axis: max. 7,033 mm Travel range Y-axis: max. 1,940 mm Travel range Z-axis: max. 475 mm Drilling tool: Available Motor power: 3 kW Horizontal drilling spindles: 6 Vertical drilling spindles: 10 Tool changer positions: 24 MACHINE DETAILS Vacuum pump: Becker VTLF 250 Year of manufacture: 2008 Main motor power: 5.5 kW Capacity: 300 m³/h Connection diameter: 70 mm Oil-free: Yes Voltage: 400 V Current consumption: 64 A Dimensions & Weight Dimensions (L x W x H): 10,300 x 2,450 x 2,800 mm Installed length: 11,000 mm Installed width: 3,900 mm Installed height: 3,000 mm Transport weight: 6,600 kg Transport packages: 1 EQUIPMENT Fodpo Aidx Hjfx Aanjgi Tools CE marking

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Fodpfew A Rv Ijx Aanegi Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Fgedpfx Aae Ahm Eyenji Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: used, Year of construction: 2018, functionality: fully functional, spindle speed (max.): 24,000 rpm, number of spindles: 6, Equipment: chip conveyor, System Description • Cutting of aluminum profiles. • Milling operations. • End-face processing of profiles. • Acquisition and provision of production data. Profile processing is performed via CNC-controlled machining units. Feeder magazine: approx. 15 profiles at 100 mm profile width. Max. profile length: 7,500 mm Min. processable remaining length: 1,000 mm Positioning speed: 100–250 m/min Min. finished part length: 350 mm Max. finished part length: 7,500 mm Max. machining width: 250 mm Max. machining height: 150 mm Min. machining width: 40 mm Min. machining height: 40 mm Gripper adjustment • Adjustment of the gripper in the Y and Z directions • Control via two servo axes Bar start measurement • Bar start measurement using a light barrier • Monitoring of correct profile length Height measurement • Automatic height measurement to determine profile tolerances. • Software-assisted correction of necessary machining lengths. Width measurement • Automatic width measurement to detect profile tolerances. • Software-assisted correction of machining positions. CNC main machining station Fgjdps Aiwxiefx Aansi Design: Ring module "Circular" Machining axes: 3 servo axes Rotational movement: 360° Number of milling units: 6 Milling spindle max. speed: 24,000 rpm Spindle power: 4 kW Machining functions • Multi-sided profile machining. • CNC-controlled milling operations. • Automatic positioning of machining units. • Tool breakage monitoring. Saw, type: SUA 1 Number of saw units: 1 Design: 4-axis version Swivel range: 45°–135° Maximum saw blade diameter: 600 mm Motor power: 2.2 kW 3-axis machining station "Kämpferfräse Alu" Axes: 3 Milling motor power: 4 kW Speed range: 3,000–12,000 rpm Max. cutter diameter: 160 mm Tool change: Automatic Tool positions: 9 Machine HMI • 3D machine visualization • Display of machining programs • Collision check • Programming interface • Data management • Interface management • Re-optimization • Provision of production data Software: UniLink • Acquisition and provision of machining data. • Interface between upstream data processes and machine control. BDE/BDA Software extension for operational data acquisition and operational data analysis. • Part counting. • Cycle time recording. • Production time recording. • Material shortage alerts. • Tool counting. • Status messages. • Production data management. Labeling Automatic labeling system, type Sato • Automatic label printing • Automatic application of labels • Side labeling of the profiles • Integration into the machining and transport process Profile transport and disposal Special transport • Inline design. • Overall length: 7,500 mm. • Material transport behind the machining stations. Scrap material transport • 2 conveyor belts for aluminum waste. • Arrangement in the machine area of the SUA-1 saw. • Removal of the aluminum waste generated during sawing. Waste bin • 1 waste bin under the Circular ring module. • Manual cleaning. System performance Reference component Specified machining time Double-winged window with mullion: Approx. 12 min. 40 sec. F30 door: Approx. 10 min. 20 sec. Facade element: Approx. 18 min. The calculation is performed under the conditions described in the original document. Specified deviation of the calculated performance data: ±5%.

Condition: used, Year of construction: 2008, 2008 DMG Sauer Lasertec 80 Fine Cutting Laser Processing Cell with Fanuc Robot M16IB 20 Handling System & DMG Siemens 840D Powerline CNC Control Cell Comprising Load/Unload Palletised Loading Robot. Chiller, Dust Extractor, Filtration & Rofin Cutting Laser System. Details: Sauer Lasertec 80 Laser Cutting Machine. Axis Travel: 'X' Travel Approx 800mm, 'Y' Travel Approx 500mm, 'Z' Travel Approx 700mm. Maximum Working Width Approx 500mm, Max Cutting length Approx 800mm. Fanuc 6-Axis Modular Robot M-16IB 20, 20kg Pay Load with Stand Alone R-30IA Control. Robot Arm Reach Approx 1,600mm. Rofin DC 015 Cutting Laser System with Stand Alone Control 4763 4763 (2008). KKT Kraus Stand Alone Chiller System KLC19 N-L (2011). Rittal Top Therm SK 3304100 Cooling Unit. Keller Dust Extraction Stand Alone Unit with Aktor-Sensor Bus-System Digital Control. Floor Space Required for Full Cell Approx 7,300mm x 5,000mm. Weight of Laser Processing Machine Approx 5,700kg. 3 Phase Power Supply, 415 Volt.Viewing Recommended. Fgedpfxez E Sabo Aansi

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Fgedpfjy Ah Tksx Aanei Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad

Condition: used, Year of construction: 2011, 2011 Kitamura Mycenter HX800iL Twin Pallet CNC Horizontal Machining Center With Fanuc Series 16i-MB Control Pallet Table Dimension 800 x 800mm (Sub Table 1,000 x 1,000mm (7 'T' Slots). Maximum Component Dimension 1,500 x 1,500mm. Maximum Table Load 1,500kg. Axis Travel 'X'=1,400mm, 'Y'=1,250mm, 'Z'=1,325mm, 'B'=360° (0.001° Increments). Rapid Traverse 'X=50m/min, 'Y'=50m/min, 'Z'=50m/min, 'B'=8°/min. Maximum Spindle Speed 8,000rpm (40kW Motor). 50 Position ATC. Spindle Taper BT50. Maximum Tool Ø125mm, Maximum Tool Weight 30kg. Power Requirement 70kVA. S/No. 48036 (2011). Sale includes2 x 1mtr. tables as pictured. Fsdpfx Aaj Ahg Rrjnegi With Through Spindle Coolant System, Dual Auger To Hakusan Chip Conveyor, Cleanmist CM 2300/3 Oil Mist Extraction Unit (With Spare Filter), Oil Chiller, Additional Sub Plate 1,000 x 1,000mm, Renishaw OMP60 Spindle Probe, Hand Wheel & Manuals.

Condition: good (used), Year of construction: 2016, Traverses X Y Z; 600 x 450 x 450mm, B axis -120/+ 45 degrees, C axis 0.001 degrees, pallet size 280mm x 280mm, maximum spindle taper HSK A63, 120 station ATC, spindle speed 20,000rpm, Heidenhain TNC530 control, Fjdpfx Aae Air H Sonegi through spindle coolant,

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool interface: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Vertical drilling spindles: 16 units Horizontal drilling spindles in X-direction: 4 units Nut sawing units: 2 units Tool positions: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Software: Windows 10, Biesse Works, NC-HOPS license Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Fods Ah Rhqjpfx Aansgi Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 2011, 2011 Kitamura Mycenter HX800iL Twin Pallet CNC Horizontal Machining Center With Fanuc Series 16i-MB Control Pallet Table Dimension 800 x 800mm (Sub Table 1,000 x 1,000mm (7 'T' Slots). Maximum Component Dimension 1,500 x 1,500mm. Maximum Table Load 1,500kg. Axis Travel 'X'=1,400mm, 'Y'=1,250mm, 'Z'=1,325mm, 'B'=360° (0.001° Increments). Rapid Traverse 'X=50m/min, 'Y'=50m/min, 'Z'=50m/min, 'B'=8°/min. Maximum Spindle Speed 8,000rpm (40kW Motor). 50 Position ATC. Spindle Taper BT50. Maximum Tool Ø125mm, Maximum Tool Weight 30kg. Power Requirement 70kVA. S/No. 48036 (2011). Sale includes2 x 1mtr. tables as pictured. Fsdps Ad Df Hefx Aanjgi With Through Spindle Coolant System, Dual Auger To Hakusan Chip Conveyor, Cleanmist CM 2300/3 Oil Mist Extraction Unit (With Spare Filter), Oil Chiller, Additional Sub Plate 1,000 x 1,000mm, Renishaw OMP60 Spindle Probe, Hand Wheel & Manuals.

Condition: used, WILLEMIN MACODEL 408S2 is a Machining and turning center from bar with high precision, superior accuracy and reliability. Travels X 250 mm, Y 200 mm, Z 310 mm; B axis -100°/+30°; resolution 0.0001; bar capacity Ø32 mm; tool magazine 24 positions; tool length 95 mm, max weight 1 kg; tool change 0.8 s; Ø with free adjacent pockets 80 mm. Spindle nose HSK E-25, stepless up to 75'000 t/min; voltage 50 Hz 3x400 V; total power 16 kVA; machine weight ~2300 kg; footprint L1840 x W2450 x H1385 mm. Equipment: Renishaw OMP 40-2 touch probe, BLUM Nano NT tool break control, coolant system, oil mist extractor, coolant filter, fire extinguishing system. Delivers tight tolerances; ideal for watchmaking, medical, aerospace, automotive and tooling. Fjdpfxozqbhbs Aansgi

Condition: excellent (used), Year of construction: 2021, operating hours: 4,300 h, DOOSAN T3600D VERTICAL MACHINING CENTRE YEAR: 2021 CONTROL: FANUC i PLUS X TRAVERSE: 520.0mm Fodpjz R T D Usfx Aansgi Y TRAVERSE: 360.0mm Z TRAVERSE: 350.0mm MAX. SPINDLE SPEED: 12,000 rpm TAPER: BT30 X-Y RAPIDS: 48.0m/min Z RAPID: 56.0m/min MAX.CUTTING FEED RATE: 28.0m/min TABLE SIZE: 2 X 650 X 375.0 mm

Condition: excellent (used), Year of construction: 2025, Specification: Workpiece Length X: 3100mm Workpiece Width Y: 1250mm (1405mm to back stop) Workpiece Thickness: 260mm including pod 12Kw 5 axis spindle 12 Vertical Drilling Spindles 4 Horizontal Drilling Spindles in the X Direction 2 Horizontal Drilling Spindles in the Y Direction Fjdpfxe Airytj Aanegi Grooving Saw, can be swivelled 0-90 LED Pod and Rail positioning Aid 10 Position Fixed Lateral Tool Changer 14 Position Rotating Tool Changer Convenience Package Tool Length Check 2 Vacuum Pumps Supply unit for Pneumatic Clamping Elements Energy Saving Function Powercontrol with powerTouch woodWop for machine woodMotion simulator for Machine 3 Phase 400V 50Hz CE

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: Mazatrol, controller model: Smooth G, workpiece weight (max.): 1,200 kg, total height: 2,810 mm, total length: 3,650 mm, total width: 3,100 mm, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, rotary table diameter: 200 mm, overall weight: 6,800 kg, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 15 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Vertical Machining Center from Mazak VCN 530C with Kitagawa MR200 table from 2018. Technical details: CNC Control: Mazatrol Smooth G Machine tablesize: 1300 x 550 mm X-axis travel: 1050 mm Y-axis travel: 530 mm Z-axis travel: 510 mm Spindle speed: 35 - 12.000 rpm Spindle: SK40/DIN 67871A Spindle motor: 18.5/11 kW Positions in tool magazine: 30 Fgedo Aidzdjpfx Aanoi and equipped, among other things, with - Chip conveyor belt left - Cooling by the spindle 15 bar - Kitagawa NC Rotary table MR 200 - Spindle total time 3.454 hours If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 368 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: HEIDENHAIN TNC 410, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table dimensions: 950 × 520 mm Table load capacity: max. 455 kg Distance, spindle nose to table (min.): 127 / 227 mm Distance, spindle nose to table (max.): 637 / 737 mm Tool clamping system: DIN 69871-1986 / ISO 7388-1 / ANSI B5.50 Spindle taper: ISO 40 Spindle speed: 60–8,000 rpm Spindle motor power: 9 / 11 kW (depending on the operating mode) Speed programming: 1 rpm per step Rapid traverse rate, X-/Y-/Z-axis: 16 / 24 m/min Feed force, X-/Y-axis: 2 / 2.5 kN Feed force, Z-axis: 7 / 6 kN Positioning accuracy, X-/Y-axis: 0.003 mm Fgsdpe Agu Spefx Aanji Positioning accuracy, Z-axis: 0.004 mm Repeatability: 0.001 mm Tool magazine capacity: 21 tool positions Tool selection: Bidirectional drum rotation Tool weight incl. holder: max. 6.8 kg Maximum drum load: max. 68 kg Tool length: max. 385 / 305 mm Tool diameter with free neighboring positions: max. 80 mm Tool diameter with occupied neighboring positions: max. 160 mm Tool change time (chip to chip): 8.0 / 7.0 s MACHINE DETAILS Control system: HEIDENHAIN TNC 410 Operating hours Control system switched on: 1,209 h Spindle operating hours: 368 h EQUIPMENT Spindle drive with AC motor

Condition: used, Year of construction: 2007, 2007 Hurco VM3 CNC Vertical Machining Centre With Hurco Max Control Table Dimensions 1,321 x 457mm (3 'T' Slots). Maximum Table Load 545kg. Axis Travel 'X'=1,270mm, 'Y'=457mm, 'Z'=457mm. Min/Max Height From Spindle Nose To Table 101-736mm. Rapid Traverse 'X'=24m/min, 'Y'=24m/min, 'Z'=19m/min. 20 Position ATC. Maximum Spindle Speed 8,000rpm (15kW Motor). Spindle Nose ISO 40. S/No. H-V30139 (2007). Fgodj Ad Efnjpfx Aansi With Coolant System, Auger Conveyor, Filtermist FX5002 Oil Mist Extractor, Air Gun, Wash Gun, Signal Tower, Work Lamps & 4th Axis Enabled. Overall Dimensions L2,830 x W2,770 x H2,576mm. Weight 4,245kg.

Year of construction: 2001, condition: repair required (used), Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm Fsdjt Ea Tfepfx Aansgi - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Condition: like new (used), Year of construction: 2016, operating hours: 10,517 h, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, workpiece length (max.): 500 mm, workpiece width (max.): 500 mm, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 4,900 mm, total width: 3,100 mm, table width: 500 mm, table length: 500 mm, overall weight: 13,970 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 26 W, Year of construction: 2016 CNC controller: Mitsubishi M-730UM Axes X-axis travel mm: 730 Y-axis travel mm: 730 Z-axis travel mm: 880 C-axis degrees: 360º (0,001) Feed rates m/min: 70 Rapid traverse m/min: 70 Milling/turning table nc: Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: Ø800x1000 Max. workpiece weight kg: 500 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 37/26/22 Cooling Cooling through the Spindle Center bar: 70 Tool system Tool holder: BT 40 Tool magazine slots: 120 With free neighboring places mm: 140 With occupied neighboring places mm: 70 Max. Tool Length mm: 550 Max tool weight kg: 12 Tool-to-tool time s: 0.9 Chip-to-chip time s: 2.5 Equipment Chip conveyor Internal cooling lubricant supply Signal lamp Tool breakage probe Laser tool measurement for measuring tool length and diameter Heat compensator Helical interpolation Fast fixed cycles Fgsdpfx Aao Ai Dbronji Machine running times Spindle Working: 10517 Rated power kVA: 59 Basic machine dimensions / weight Length mm: 4900 Width mm: 3100 Height mm: 3000 Weight kg: 13970

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call. Fedpfx Asz Iz Imjansgi

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 2134 x 1016 x 762mm, Table 2134 x 914mm, table load 1814 kgs, Spindle Speed 8,100 rpm, Spindle taper BT40, Spindle Motor 30Hp, Fgsdpfx Ae Ahww Dsanji HAAS Control, 24 Station ATC, coolant, low volt light, swarf auger