Used Protective Gas for sale (14,911)

Condition: new, functionality: fully functional, empty load weight: 545 kg, maximum load weight: 2,155 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,880 mm, loading space width: 1,530 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, Martz Bau-3 300/2 S 2.7T NEW VEHICLE Internal dimensions: 288cm x 154cm Side board height: 30cm Loading platform height: 40cm Total weight: 2700kg Payload: 2155kg Braked tandem axle trailer Overrun brake and parking brake by AL-KO 2x 1350kg axles Low chassis Fully welded, hot-dip galvanized steel frame Fully supported floor 30cm steel side boards 15mm thick, non-slip and robust screen-printed wood floor Automatic support wheel with 400kg support load 12 tie-down points with 600kg tensile force, also on the front Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pole plug Side marker lights in the front Rear lights with reversing light and triangular reflectors Vertical tailgate incl. lifting aid (gas spring) Shovel holder Walkable steel fenders OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICES STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Theft protection -Fine or coarse mesh net -Aluminum floor -Aluminum floor panels More accessories available upon request! Plus freight to Gera and vehicle registration document 275 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. Ijdpfx Ajztc Nxoaxotk You will find a wide selection of rental trailers with us. Visit us online or come by directly!

Condition: used, Year of construction: 2023, PSA Nitrogen Gas Generator NITRO Source N2 Parker N2-75 PALY VIG 1000 Liter Itodex U Tgmopfx Aaxjk Year of manufacture: 2023 The unit looks as good as new. The system was only in operation for a short period.

Year of construction: 1989, condition: good (used), functionality: fully functional, 300kg/h Capacity Electrically Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Loading - Electrically Hardening Furnace (1989)- Oil Tank - Rare Washing Machine - WMA Loading Unit For Tempering - Gas Heated Tempering Furnace (Industrial Ofenbau 2007) Itjdpexqy Duefx Aaxek Protection Gas : Nitrogen / Methanol

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Iedpfx Ajzal Ncsaxjtk

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry Iodpfjiuznusx Aaxstk - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: used, operating hours: 13,848 h, machine/vehicle number: SO139, Used Molding Machine MRT 3503 R for big container in HDPETechnical Specifications & Performance DataThe MRT 3503 R is a heavy-duty industrial forming system engineered for high-temperature plastic processing and container manufacturing (1.000/2.000/5.000L Tanks). The machine combines large-format capacity with controlled rotation on multiple axes to deliver consistent, repeatable forming quality.Model: MRT 3503 RSpherical diameter: 3500 mmMachine length: 14960 mmMachine width: 13026 mmMachine height: 5480 mmCarriages: 3Straight arm: 1Maximum load (straight arm): 2000 kgSecondary axis diameter (straight arm): 3250 mmOffset arm: AvailableMaximum load (offset arm): 1550 kgSecondary axis diameter (offset arm): 2900 mmPrimary axis revolutions: 0–8 rpmSecondary axis revolutions: 0–8 rpmBurner brand/model: WEISHAUPT WM-G10/2 A exec. ZM-LNDigital burner power (max): 630 kWBurner calibration power: 550 kWMaximum operating temperature: 300°CAlarm temperature: 340°CFuel type: Natural gas methaneAverage fuel consumption (continuous cycle):46 m³/hInstalled electrical power: 42 kWVoltage/Frequency: 400 V / 50 HzAverage electricity consumption (continuous cycle): 30–35 kW/hCompressed air: 2 lines, 6 bar max; 32000 Nl/hWater pressure: 2 barWater consumption (max): 4–6 l/minStructure finish: RAL 5002 / RAL 3020; Protections RAL 1023Arm surface finish: High-temperature silverAdvanced Automation & Control SystemsThe MRT 3503 R features precise rotational control with independently adjustable primary and secondary axes from 0 to 8 rpm for accurate thermal forming profiles. A digital WEISHAUPT burner package enables stable process temperatures up to 300°C, with an alarm setpoint at 340°C for enhanced protection. Electrical integration is standardized at 400 V, 50 Hz with 42 kW installed power for auxiliary systems. Operator safety is supported by guarded enclosures and compliance certification, while color-coded protections aid visual management. The controlled heating, rotation, and timing provide consistent part quality and predictable cycle times in industrial packaging applications.Production Line Integration CapabilitiesThis machine can operate as a standalone forming cell or be integrated into a broader production line with downstream trimming and quality checks. The generous envelope (3500 mm spherical diameter) and multiple carriages support high throughput configurations and flexible tooling strategies. I... Iodeziyy Hopfx Aaxetk

Year of construction: 2010, condition: ready for operation (used), The line consists of: 1. SEALPAC A7 tray sealing machine (year of manufacture: 2010) Number of cycles: up to 15 cycles/min Capacity: up to 100 containers/min (vacuum/gas mode; higher capacity in sealing-only mode) Weight: 1700 kg Compressed air: min. 6 bar Power supply: 3 × 400/230V – max. 8 kW Technical condition: very good 2. KWS5472BW3D automatic checkweigher Designed for weighing individual loads Accurate weight compliance control Allows for seamless integration with the production line 3. CASSEL metal detector High detection sensitivity Protection against metallic contaminants Industrial design, adapted for continuous operation Advantages of the line: High process efficiency and repeatability Operation in MAP mode or standard sealing mode Itjdpfx Aajzb U U Rjxek Robust, proven equipment from reputable manufacturers Low operating costs The line is ready for immediate operation

Condition: ready for operation (used), Year of construction: 2018, travel distance Z-axis: 305 mm, total height: 2,692 mm, overall weight: 2,041 kg, number of axes: 3, This 3-axis OMAX MAXIEM 2030 30 HP AJet was manufactured in 2018, featuring a CNC Waterjet Cutting System with a 5-axis cutting capability. It includes a robust 30 HP pump, MAXJET® 5i cutting head, and a cutting envelope of 3,061 mm by 2,019 mm. Ideal for high-precision applications, it supports a maximum material load of 1,465 kg/m². Consider the opportunity to buy this OMAX MAXIEM 2030 waterjet cutting machine. Contact us for more information about this machine. • Work envelope / cutting table: • Cutting X-axis travel: 10’ 0’’ (3,061 mm) • Cutting Y-axis travel: 6’ 7’’ (2,019 mm) • X-axis table size: 12’ 2’’ (3,708 mm) • Y-axis table size: 7’ 0’’ (2,134 mm) Ijdpfjya Ecijx Aaxetk • Material support slats: 4’’ × 14 ga galvanized steel (102 mm × 2 mm) • Performance: • Traverse speed: 500 in/min (12,700 mm/min) • Repeatability: ±0.001’’ (±0.025 mm) • Accuracy: ±0.003’’ (±0.076 mm) • Pump & cutting head: • Pump power: 30 HP • Cutting head: MAXJET 5i with A-Jet (5-axis cutting) • Nozzle life: Diamond orifice, approx. 500 hours (guaranteed) • Dimensions & weight: • Operating weight: 20,500 lb (9,299 kg) • Overall height: 8’ 10’’ (2,692 mm) • Footprint (without controller): 14’ 1’’ × 14’ 1’’ (4,293 × 4,293 mm) • Slat bed: • Standard configuration: 34 slats • Maximum slat configuration (optional): 117 slats • Maximum material load: 300 lb/ft² (1,465 kg/m²) • Standard features: • Intelli-TRAX abrasive-jet linear drive system (1 micron resolution) • Brushless servo motors and drives • Abrasive feed system (15 lb capacity) • Rugged catcher tank (300 lb/ft² load capacity) • Industrial steel protection covers on X-axis • Modular bridge control and power centers • Low-noise pump and system design • Windows-based control system • IntelliMAX Standard Software (2 seats) • Mobile control station with widescreen display • No special foundation required • Ergonomic full table access • Made in the USA

Condition: like new (used), Year of construction: 2024, Binder CB 260 Incubator with O2 control The incubator is unused and originally packaged. Model CB 260 | CO2 Incubators with Thermal Sterilization and Sterilizable CO2 Sensor Advantages • Safety thanks to maximum protection against contamination of cell cultures • Reliability due to consistent comfort conditions for cells Itedpfsxaungsx Aaxjk • User-friendly thanks to easy routine cleaning and convenient operation • Cost-effective operation without consumables PRODUCT DESCRIPTION The high-performance and versatile CB CO₂ incubator is suitable for cell testing in substance research and medical studies. With a wide range of options and accessories, the BINDER incubator easily fulfils complex cultivation tasks or individually specified growth conditions at low oxygen concentration. KEY FEATURES • Optimized dual-chamber humidification system with anti-condensation protection • Proven anti-contamination concept with 180°C thermal sterilization • Hot air sterilized CO₂ sensor with single-source infrared technology • Seamless inner chamber made of stainless steel with stainless steel bead slide-in supports • Fanless interior with Venturi CO₂ gas mixing nozzle • Intuitively operated touch controller • Internal measurement data recording system, data export via USB interface in a common format • Fault diagnostics system with visual and audible alarm Connections: Ethernet, USB, volt-free alarm contact CO₂ Fail Safe System for pH safety of cell cultures

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Iodpfexrgl Ijx Aaxjtk Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station Isdpfx Aaoy Saqgsxetk - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: good (used), functionality: fully functional, machine/vehicle number: W1V9071331N136811, mileage: 40,171 km, power: 110 kW (149.56 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 2,035 kg, maximum load weight: 1,465 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 06/2027, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6d-temp, number of seats: 2, total length: 6,046 mm, total width: 2,099 mm, total height: 2,293 mm, loading space length: 3,040 mm, loading space width: 2,050 mm, Equipment: ABS, Android Auto, Apple CarPlay, EBS, air conditioning, airbag, car registration, electronic stability program (ESP), full service history, navigation system, non-smoking vehicle, power assisted steering, tire pressure monitoring, truck registration, Special equipment: 9147 Paint color Arctic White MB 9147 A50 Front axle with increased load capacity AI1 Control code rear axle bevel gear 215 AR2 Axle ratio I = 3.923 C6L Multifunction steering wheel CB1 Suspension for comfort and cargo protection Iodpfeztzikox Aaxjtk CL1 Steering wheel adjustable in inclination and height E1D Digital radio (DAB) E1E Navigation E1G Live Traffic capability E2N Control of Pro features in NTG6 E3M MBUX multimedia system with 7-inch touchscreen ED4 Fleece battery 12 V 92 Ah ES0 Jump start contact EW6 Pre-wiring for Remote Services Plus EX9 3 years of free map data updates EY5 Mercedes-Benz emergency call system EY6 Breakdown management F35 Rear window F61 Interior mirror F68 Exterior mirrors, heated and electrically adjustable FF5 Storage compartment above the windshield FHS Cab FJ4 Storage compartment under the cockpit GD8 6-speed manual transmission ECO Gear H21 Heat-insulating glass all around with band filter on the windshield HH9 Semi-automatic controlled climate control Tempmatic HI1 Climate zone 1 (cold/comfort) IC1 Model series C907/C910 Sprinter IE0 Model series C907 VS30 Rwd IF3 Chassis with cab IG4 Standard IG5 Basic IH6 Head unit ECE/ROW IK0 Complete vehicle IL1 Domestic market (Germany) IL5 Left-hand drive IR4 Wheelbase 3665 mm (BM-defining code) IT4 3.5-ton vehicle J10 Speedometer km/h J55 Seatbelt warning for co-driver's seat J58 Seatbelt warning for driver's seat J65 Outside temperature display JA8 Crosswind assist JG0 Shift point indicator JH3 Communication module (LTE) for digital services JI7 Start-up distance, maintenance interval 60,000 km K13 Main tank 71 liters KP7 Exhaust gas purification SCR generation 4 L Left-hand drive L13 Fog lights with cornering function L72 Electrical system for superstructure interior lighting L94 Omission of parking lights LA2 Headlight assist LB1 Side marker lights LE1 Adaptive brake light LX5 Europe M40 Generator 14V/200A MJ8 ECO start-stop function MT2 Emission class Euro 6D-TEMP N1 Gr.III/N2 MU3 Engine OM654 DE 20 LA 110 kW (150 hp) P02 Steel platform with aluminum side panels P47 Front mud flaps Q11 Longitudinal member reinforcement Q67 Towing eye rear RF5 Tire manufacturer Pirelli (50) RH2 Tires 235/65 R16 C RM1 M + S tires RS3 Steel wheels 6.5 J x 16 RX5 Wheel manufacturer Maxion Wheels S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S25 Armrest for co-driver's seat, center armrest rear (FFO) SA5 Airbag driver SA6 Airbag co-driver SB1 Driver's seat comfort SB2 Co-driver's seat comfort SK2 Seat occupancy recognition driver's seat V3L All-weather floor mats VF7 Fabric Maturin black X30 Registration certificate part 2 X99 Manufacturer Mercedes-Benz AG XC9 COC documents XM1 Noise reduction measure XM4 Acoustic package XN0 Model year G0-II XO5 Digital operating manual XW9 Control code change to WLTP XZ0 Model generation 0, model year 2010 Z1N Approval N1 Z2E Country version EU-EFTA-UK Z3R Premium tire protection (3 years) Z4W Manufacturing location Ludwigsfelde Z75 Bodywork measures additionally

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Itjdpsx Ihg Isfx Aaxsk Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. nominal heat input (Hs) QN: 30.08 kW Max. nominal heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: refurbished (used), Stable arc – for DC and AC. The V 27 is available in all power versions as a DC and AC/DC model. The V 27 is fundamentally characterized by a very stable arc. When welding with AC, the current waveform is optimized for both excellent cleaning of the aluminum oxide layer and reduced noise. Additionally, the AC/DC version features an arc spot function. Thanks to the rectangular current waveform, the V 27 excels with increased power and maximum arc stability when welding aluminum. Robust and safe: the V 27 housing. The high-end technology inside the V 27 is protected by a robust industrial housing made of metal – ideal for outdoor use. In addition, the fully load-bearing handles allow the power source to be suspended from a crane and also serve as a holder for the hose pack. The double gas cylinder securing system ensures a maximum level of safety in the production environment. Pulsing and fast pulsing up to 20 kHz. The integrated pulsing and fast pulsing function up to 20 kHz is particularly well suited for processing thin sheet metal. It also enables excellent weld pool control and guarantees perfect results – even with difficult welding tasks. Energy efficiency at full performance. The integrated standby function ensures the automatic switching on and off of individual components. Thermocontrol sensors monitor the temperature of the system and control the fan as needed. This reduces fan noise and dust levels inside the machine and also saves energy. Optimal parameters with SmartBase. Thanks to SmartBase technology, the arc is always perfectly matched to the electrode you have selected. Welding parameters, arc starting, and working range are automatically adjusted to the ideal settings. For optimal freedom, you can fine-tune the arc individually. This guarantees that you weld with the optimal arc for your needs. Technical data TIG welding Welding range 3~ 400 V:[A] 3 - 270 TIG duty cycle AC 400 V Duty cycle AC 100% (40°c):[A] 250 Duty cycle AC 60% (40°c):[A] 270 Itedpfx Ajzibw Tjaxsk Duty cycle AC max. welding current (40°c):[%] 60 TIG duty cycle DC 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 270 Duty cycle DC max. welding current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 220 Weldable electrodes:[Ø in mm] 1.5 - 4 Electrode duty cycle Duty cycle max. welding current (40°c):[%] 80 Process-independent data Open-circuit voltage:[V] 43 - 96 Power supply 400 V Power supply voltage 3~ (50/60 Hz):[V] 400 Power supply fuse 3~ (50/60 Hz):[A] 16 Positive power supply tolerance 3~ (50/60 Hz):[%] 15 Negative power supply tolerance 3~ (50/60 Hz):[%] 15 Power plug Power plug: CEE 16 Standards and approvals Protection class: IP23S Insulation class: F Standard/Norm: EN 60974-01 Labeling/Certification: CE, S Cooling type Cooling type: Gas-cooled, Water-cooled Cooling Standard cooling capacity (l/min):[kW] 1.1 Tank capacity:[l] 4.3 Dimensions Dimensions (LxWxH):[mm] 1.130 × 450 × 815 Weights Weight:[kg] 92 Weight water cooling (filled):[kg] 14.7

Condition: excellent (used), Year of construction: 1993, Gas tank used for CO₂ (carbon dioxide). Working pressure: 20 bar. Year of manufacture: 1993. Ijdpfx Aoy R Uq Ssaxjtk We also have in stock other tanks and trailers for different gases: oxygen, nitrogen, argon, hydrogen, helium, methane, ethylene, N2O, LNG, CNG

Year of construction: 2025, condition: new, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma TSA 680 S Automatically operating machine for sealing pre-formed trays made of various materials (polypropylene, polyethylene, PVC, polystyrene, PET, CPET, etc.) using heat-sealable films. These films are compatible with the trays and create packaging with or without a protective atmosphere – depending on customer requirements. Technical Specifications Itodpfx Ajzmdrhoaxek Model: TSA 680 S Condition: Exhibition machine Year of manufacture: 2025 Performance: Up to 54 packages/minute (depending on film and product characteristics) with MAP. Packaging type: Tray sealer Machine Equipment Length of infeed conveyor: Free infeed section 3000 mm Equipment Features ✅ 3-meter belt infeed ✅ RFID access cards ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ MAP Cut Inside tool for trays 227 x 175 or 190 x 144 ❌ Double film roll holder ✅ Vacuum / Gas system (O2 >21% possible) ✅ Vacuum pump Busch 300 m3/h ✅ Menu separator for liquids ✅ Spare parts packages for machine & tool included ✅ Tool changing cart ✅ Central lubrication for lifting system ✅ Synchronization signals for upstream and downstream equipment Documentation & Operation Language (Documentation & HMI): German (other languages available on request) Dimensions & Weight External dimensions (L × W × H): 6,020 × 2,070 × 1,110 mm Shipping weight: 2600 kg (including transport packaging)

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Generator UDSA Gas-Fired Warm Air Generator – Efficient to the Peak The best-known appliance from REZNOR is the UDSA gas-fired warm air generator, which ensures even air distribution in industrial buildings. This easy-to-install recirculating air unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner, and exhaust fan. Combustion air can be drawn either from outside or from the showroom (standard configuration). Itedpfxsx Ihiij Aaxjk The REZNOR UDSA warm air generator guarantees even air distribution throughout the heated building. Its patented heat exchanger sets new standards in terms of airflow and heat transfer, achieving an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. This generation of appliances allows for the particularly economical direct heating of buildings – without a central heating system – using decentralized, modulating gas-fired warm air generators. REZNOR UDSA Gas-fired warm air generator. The advantages: Efficiency of over 92% Suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation CE system certified, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air guide vanes Heating output modulation up to 50% EC technology ErP Ready These units are direct-fired gas-fired warm air generators with fan-assisted atmospheric multi-gas burners. Installation of the gas-fired warm air generator, including gas and flue connections, must be carried out by an authorized installation company. The gas-fired WLEs are suitable for: - Natural gas or LPG operation - Forced air operation - Intake temperatures below 5°C with stainless steel heat exchanger* - Heating operation, 1-stage or 2-stage*, controlled via room thermostat and heating control switch - Ventilation° controlled via ECOtronic TN-L° with day/night/weekly program. Flue gas discharge via roof, version B or C ° Flue gas discharge through the exterior wall, version C ° Gas-fired WLE type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62-C82 Regulation: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. nominal heat input (Hs) QN: 17.60 kW Max. nominal heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m³/h Protection class: IP20 Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, color: orange, Warranty: 24 months Productivity: 100 tph Polygon can produce mobile or fixed asphalt plants with capacities of 60-240 tons/ hour.High quality asphalt plant are produced with experienced staff. Polygon batch Mix Asphalt Plants Advantages Optimum price, high performance Precision weighing and high quality blend High efficiency rotary dryer and burner Easy Maintenance 7-24 after sale support Possibility of asphalt mixing plant spare parts at reasonable prices Operator friendly asphalt plant automation system Easy assembly and disassembly possibility Products suitable for different asphalt production (mastic asphalt, colored asphalt, recycling​ Itjdpfx Asx D A N Teaxjk Aggregates are typically moved from the stockpiles to the cold feed bin using a front-end loader. Cold feed bins are used to dosage the different aggregates used in the mix to the drying drum. Our Advantages; Thanks to its functional design, it facilitates transportation and installation. Attachments have bolted design. Thanks to its high strength silo casing and twisted body undergoes no change in shape under load. Thanks to the frequency-controlled dosing bands, each material can be supplied in any desired rate. The flame size of the dryer burner can be controlled automatically with the measurement sensor (optional)​ Polygon asphalt plant mixer provides long wear parts life and homogeneous blend. Features; Heavy duty group high quality reducer. Heat and abrasion resistant inner liners Long life arms and paddles Double-valved discharge system Discharge valve with external resistance heating Polygon-asphalt plant filter system separates the gas and dust generated during asphalt production. The decomposed filler dust can be used in mixture if desired. Features; Input and output temperature measurement Clean air valve to protect bags from burns Nomex filter bags with vertical casette Dust-proof design Easy bag changing Reverse air flow bag cleaning system Insulation suitable for climate conditions and heat transfer ​The dust collection system includes supporting feet for easy installation and implementation. The filter dust collection system is perfectly tailored to the mixing plant capacity. The vertical layout-of the filter bags guarantees maximum utilisation of the surface area with efficient filter function. Polygon dryer creates a maximum heat transfer surface thanks to its special wing design. With minimum fuel consumption, it allows the removal of humidity of aggregate and heat it up to the desired temperature. Our Advantages; Dryer rollers and rings are manufactured from long-life forged steel. Easily interchangeable bolt-type compensation springs that distributes body load evenly Suitable for stainless steel insulation coating and heat transfer, rockwool covered body With soft starter support, operation without problem under load Automatically adjustable burner according to humidity and amount of aggregate (optional The drum tube, which is made of a thick-walled, solid steel construc- tion, achieves maximum efficiency, very low exhaust gas temperatures and prevents temperature losses during the...

Condition: used, mileage: 79,378 km, power: 90 kW (122.37 HP), first registration: 10/2020, fuel type: diesel, overall weight: 2,375 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2019, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, INTERNAL VEHICLE NUMBER: M622 ----VW CADDY 2.0 TDI EURO 6d-TEMP----MILEAGE: 79,378 KM, MAINTAINED ACCORDING TO SERVICE SCHEDULE LAST INSPECTION WITH OIL CHANGE AT 79,500 KM ON 06/24/2026 THE VEHICLE HISTORY IS AVAILABLE IN DIGITAL FORM. ALL INSPECTIONS WERE CARRIED OUT BY AN AUTHORIZED DEALER WORKSHOP. 1ST OWNER----4 MOTION (ALL-WHEEL DRIVE)----LIKE-NEW M+S TIRES----2-SEATER ----* CRUISE CONTROL * SPEED LIMITER * SPEED RESTRICTOR * HILL START ASSIST * BRAKE ASSIST * MULTI-COLLISION BRAKE * REAR PARKING ASSISTANCE (PDC) * DRIVER FATIGUE DETECTION * AIR CONDITIONING * START/STOP AUTOMATIC ----TOW HITCH TOWING CAPACITY UP TO MAX. 1450 KG----CORNERING LIGHTS ----FOG LAMPS----TRENDLINE----GAS BOTTLE COMPARTMENT WITH VENTILATION ----SORTIMO WOOD FLOOR WITH EYELETS----VEHICLE FITTING BY SORTIMO GLOBALSYSTEM WITH DRAWERS AND SHELVES 7 DRAWERS 4 DRAWERS, EACH 45 X 40 CM 3 DRAWERS, EACH 65 X 35 CM 1 DRAWER, EACH 45 X 65 CM 3 SHELVES 1 SHELF, 35 X 70 CM 1 SHELF, 45 X 35 CM 1 SHELF, 35 X 120 CM 6 X SCREW BOXES BROOM AND SHOVEL HOLDER----ROOF RACK BY SORTIMO TOPSYSTEM----FIRE EXTINGUISHER----* BLUETOOTH HANDS-FREE SYSTEM * USB * AUX * SD CARD * CENTRAL LOCKING WITH 2 REMOTE KEYS * ELECTRIC EXTERIOR MIRRORS + HEATED * ELECTRIC WINDOW LIFTS * LUMBAR SUPPORT * RIGHT SLIDING DOOR, GLAZED * REAR DOORS, GLAZED * PARTITION, GLAZED * HEATED REAR WINDOW * LED CAB/LOAD COMPARTMENT LIGHTING * STORAGE COMPARTMENT IN CAB ----Special equipment: Itodpfx Aajzi In Sjxok * Audio system Composition Audio (monochrome display, SD card interface, AUX-in) * Exterior mirrors * Design: Commercial Vehicle * Connectivity package * Rear parking aid * Remote control key (2) * Rear wing doors with glazing * Heated rear window * Load compartment partition high with window * Tire pressure monitoring display * Heated windshield washer nozzles * Side window in the load/passenger compartment front right, fixed * Seat cover / upholstery: Robust seat covers * Underride protection, engine (engine and transmission) Additional equipment: * 3rd brake light * Airbag, passenger side * Airbag, driver side * Anti-lock braking system (ABS) * Anti-slip regulation (ASR) * Equipment package: BlueMotion Technology * Exterior mirror, left, aspherical * Exterior mirror, electric, adjustable and heated * Exterior mirror, right, convex * BlueMotion Technology * Brake assist * Roof rack preparation * Electronic differential lock * Hill start assistant * Multi-collision brake * Driver fatigue detection * Windshield, laminated glass, tinted * Body / structure: Van * Lumbar support, front seat, left * Steering wheel (3 spokes) * Steering column (steering wheel) adjustable mechanically * Commercial vehicle registration * Engine, 2.0 liter - 90 kW TDI * Engine drag torque control (MSR) * Multifunction display Plus * Non-smoker package * Payload, standard * Wheelbase 3006 mm * Tire repair kit (Tire Mobility Set) * Low emissions according to exhaust standard Euro 6d-TEMP * Sliding door, right * Drawer/storage compartment under front seats * SCR system (AdBlue technology) * Side airbag front with head airbag unit * Seat belts front with height adjustment and belt tensioner * Steel rims 6x15 * Start/stop system * Trendline * Door handles outside, vehicle color * First-aid kit and warning triangle ----++ Exclusive offer at Autohaus Mat GmbH: Up to ¤ 1,000 trade-in bonus – your advantage for vehicle replacement! (valid only for commercial vehicles) ++ Upon request, we will retrofit the vehicle with a tow hitch. Profe

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. Itsdpfxezmqv Hj Aaxok The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state.

Condition: excellent (used), Year of construction: 2023, Laser Welding Robot Manufacturer: TRUMPF Model: TruLaser Weld 5000 (LR03) Year of construction: CW 51/2023 – Commissioned: 2024 4,000-watt solid-state (fiber) laser Operating hours: as new, used ADVANCED EQUIPMENT: 30 m LLK (laser light cable) TruDisk 4001 (solid-state, fiber) with 1 LLK-A, 1 unit, incl. chiller, incl. safety package for laser welding Iodsw U Ezzopfx Aaxetk Workpiece Processing: Rotary module for shielding gas guidance FusionLine FusionLine combination nozzle Positioners: Rotary-tilt positioner with endless rotation Zero-point clamping system for rotary-tilt positioner Safety cabin extended to 4,800 x 4,800 mm (front x side) Data transmission: OPC UA for Machine Tools Basic (license may be required) EQUIPMENT: Machine: Collision protection KUKA Robot KR 70 Machine status indicator light Compressed air and shielding gas supply Machine designed for ambient temperatures up to 45°C Welding optics Perlator nozzle Welding optics BrightLine Scan Motorized focus adjustment Welding process visualizer Process gas at welding optics Linear nozzle Process gas and crossjet programmable Operation / Programming: KUKA smartPAD Production plan Touch panel with 21.5'' TFT color display Touchpoint user interface Data transfer: USB interface RJ-45 network interface Central Link Remote support interface Online update manager Safety: Work area monitoring Workpiece Processing: Forming gas Further Optional BASE EQUIPMENT: Automatic sliding door Compact dust extractor with 3,000 m³/h Support arm for operator panel Axis adjustment set Robot elevation (extended standard) Data usage agreement TECHNICAL DATA: Type: High Accuracy Robot Number of axes: 6 Rated payload: 70 kg Repeatability: +/- 0.05 mm Rotary-tilt positioner Max. working area: 2,000 x 1,000 mm x 1,200 mm Max. load: 500 kg Rotary table Max. working area: 2,350 mm (diameter) Max. working area (height): 1,150 mm Max. load (per side): 250 kg Rotary changer with turnover axis Max. working area (turnover drum diameter): 1,200 mm Max. working area (length): 2,600 mm Max. load (per side): 750 kg Turnover positioner Max. working area (turnover drum diameter): 2,000 mm Max. working area (length): 4,000 mm Max. load (per side): 1,000 kg Compact rotary changer with 3D clamping plate (rectangular) Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Insert height: 830 mm Compact rotary changer with vertical rotary axes: Max. working area (diameter): 3,000 mm Max. working area (height): 1,250 mm Max. load (per side): 600 kg Max. permissible mass moment of inertia ring indexing table: 600 kg*m² Rotary changer rotation range: +/- 180° Rotary changer rotation time (for 180°): 3.7 s Vertical rotary axis rotation range: +/- 190° Max. permissible mass moment of inertia vertical rotary axis: 359 kg*m² Insert height: 885 mm Compliance with CE and EU Machinery Directive must be verified by the buyer upon recommissioning if applicable. Original price: over EUR 580,000 This used machine can be inspected under operating conditions. All information provided without guarantee – sale excludes all warranties and liability. Subject to prior sale.

Condition: new, Year of construction: 2025, laser hours: 1 h, laser power: 12,000 W, power: 12 kW (16.32 HP), Description AORE PG3015: (12 Kw) We can deliver this type Laser cap. from ( 20 Kw) A Compact Design with Complete Protection (CE) table length 3015 mm table width 1550 mm laser head ( BOCI ) autofocus laser capacity Kw 12 overall dimensions 8.250 x 2.880 x 2.320 mm weight of the machine ca. 8.700 kg Furnishing: - Max-photonics Laser source 12 Kw - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Boci autofocus cutting head - CYPCUT - software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 23" touchscreen, keyboard, control panel - additional loading unit - central Lubrication system Cutting capacities: ( for 12 Kw ) - normal steel 35 max 45 mm - stainless steel 30 mm - aluminium 16 mm - brass 12 mm - copper 10 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3000 mm - Y-axis travel 1500 mm - Z-axis travel 375 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 m - Reputability accuracy +/- 0.02 mm - Acceleration max. 1,5 G Automatic table change: - Number of table 2 (12 second max for changing) - automatic change, max load on tables 1.440 kg. - 2 x CCTV camera on pallet arear on screen assisting gases: - mild steel - oxygen (0.5 - 25 bar) Iedpfovgrl Hex Aaxotk - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system, cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - 6 part trolly under work table - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 120 m/min. - Accelerations up to 1.5 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- 2 CCTV camera’s on screen -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 60 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: excellent (used), Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Cabinet Water-cooled A professional emission test chamber is offered for sale Weiss Technik EmissionEvent VOC/240 (Year of manufacture: 2018) from an industrial laboratory and testing operation. The device is designed for conducting standardized emission tests under precisely controlled temperature, climatic, and process conditions, and is built for continuous use in laboratories, industrial settings, and quality assurance. Itedpfx Aeziyz Reaxjk What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emissions) of materials under defined conditions. It analyses which substances are released into the air by a given material. Typical applications include: - Emission testing of plastics, components, materials - Automotive interior material testing (odor / pollutants) - Building products & furniture emission measurement - Packaging, textiles, adhesives, paints - Quality control and standard testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air conditions. Emissions are extracted from the test space using a carrier gas (e.g. nitrogen or air) and can subsequently be analyzed using appropriate measuring equipment. Device features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurement - Automatic process control with touch panel - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade construction (suitable for laboratory and continuous operation) Technical data for temperature testing: - Temperature range: +20 to +130 °C - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.1 to ±0.5 K - Temperature change rate (according to IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min - Temperature change rate (average, with enhanced heating and cooling capacity): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Technical data for climate testing: - Temperature range: +20 to +130 °C - Dew point range: +5 to +60 °C - Relative humidity range: 5 to 95% RH - Temporal temperature deviation: 0.1 to 0.3 K - Temporal humidity deviation: -3 to 3% RH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test space): Emission test chamber: 200 l Gross test chamber volume: 240 l Net test chamber volume: 208 l Max. test sample load: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10% / 50 Hz Nominal power: 12.1 kW Nominal current: 30 A Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Important information for you as the buyer: The following procedures are carried out on the chambers we offer prior to sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, a documented trial run is carried out Condition: used Scope of supply: (see picture) (Technical data and specifications subject to change and errors!) For further questions, feel free

Year of construction: 1988, condition: excellent (used), functionality: fully functional, 250 kg/h Capacity Gas Heated Aichelin Heat Treatment Line Fully functinal Still in operation Itedpfxjxqy U He Aaxek Line Consisted With : Loading - Gas Heated Hardening Furnace (1988)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (20xx) - Blackning Tank - Dryer Protection Gas : Nitrogen / Methanol

Year of construction: 1991, condition: excellent (used), functionality: fully functional, 250kg/h Capacity Gas Heated Kohnle Heat Treatment Line Fully functinal Still in operation Line Consisted With : Loading - Gas Heated Hardening Furnace (1991)- Oil Tank - Rare Washing Machine - Loading Unit For Tempering - Electrically Heated Tempering Furnace (Industrial Ofenbau 2007) - Blackning Tank Iedpfx Asxqy Itsaxstk Protection Gas : Nitrogen / Methanol