Used Pulse Oximeter for sale (761)

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: air, welding current at 60% duty cycle: 207 A, welding current at 100% duty cycle: 160 A, welding current (min.): 20 A, welding current (max.): 250 A, For sale: Kemppi Kempact 2530 20-250 AMP (100% 160A) Gas-cooled 2/4 Step Itsdpsxbn Hxjfx Ag Non 4 Roller drive Steel – Stainless Steel weldable Refurbished, Serviced, and Tested Including Kemppi Welding torch, earth work cable with clamp, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, functionality: fully functional, machine/vehicle number: FN 57xxxx, Year of construction: 2018, operating hours: 4,722 h, load capacity: 1,600 kg, lifting height: 4,400 mm, free lift: 1,435 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork length: 1,150 mm, empty load weight: 3,256 kg, total length: 2,098 mm, drive type: Elektro, construction width: 1,060 mm, Electric 4-wheel forklift Chassis number: FN 57xxxx Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: AC pulse control Condition: Refurbished, without warranty Technical condition: Very good Front tires type: Superelastic Front tire size: SE 18x7-8 Itsdpevf R Tajfx Ag Njn Rear tires type: Superelastic Rear tire size: SE 16x6-8 Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: IBV Battery type: PzS Battery year: 2025 Description: Serviced, technically and cosmetically overhauled, UVV-inspected, a new battery will be installed before delivery, sold without warranty or liability for material defects Sideshift, integrated 3rd valve, rear work light, front work light, overhead guard, pulse control, full free lift, Multi-Pilot, panoramic mirror, fabric seat, battery (will be ordered and INSTALLED NEW before delivery) with Aquamatic system, matching external charger included.

Condition: used, Year of construction: 2023, Used Palamides gamma 502ho delivery machine Iodew Evclopfx Ag Netn The Palamides gamma 502ho is an automatic delivery and banding machine, specifically designed for the efficient post-processing of print products such as brochures, flyers, greeting cards, and mailings. It is ideal for connection to folding machines, saddle stitchers, collators, or mailing lines and stands out due to its compact design, high flexibility, and ease of use. The gamma 502ho increases productivity, reduces operating costs, and enables efficient handling of large production volumes even with minimal staff. Key Features - Compact, mobile design: Requires only a small footprint and can be quickly connected to various production machines. - Automatic banding: Optional, robust impulse sealing system for secure and clean banding of stacks. - Intuitive operation: Clear touch display and user-friendly interface for quick setup and operation by a single person. - Flexible delivery: Stacks can be banded or delivered loose; the desired quantity is freely selectable. - Efficient waste control: Automatic ejection of defective products, production stop if too many defective copies occur in succession. - Large buffer table: Gives the operator sufficient time for quality control and packaging of stacks. - Seamless integration: Especially suitable for connection to the Horizon iCE StitchLiner Mark IV, but also universally usable for other machines—no additional interface required. - Industry 4.0-capable: Operational data acquisition and dynamic separation of book blocks of different sizes possible (DSP platform). Technical Specifications - Infeed format: 4-page sheets, variable from 650 to 1,000 mm - Product thickness (max.): 100 mm (optional 120 mm) - Format (max.): 510 x 235 mm - Format (min.): 140 x 95 mm (optional 95 x 75 mm) - Performance: up to 600 packs/cycles per hour - Main connection: 3ph+N+GND 400V AC, 50/60 Hz - Control voltage: 24V DC - Power: 4 kW - Fuse: 16A - Year of manufacture: 2023 - Weight: approx. 500 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, machine/vehicle number: 26222, Year of construction: 2011, operating hours: 11,282 h, load capacity: 3,500 kg, lifting height: 6,400 mm, free lift: 2,000 mm, fuel type: diesel, mast type: triplex, construction height: 2,820 mm, Equipment: sideshift, .: 26222 Machine Details: Year of manufacture: 2011 Load capacity: 3,500 kg Lift height: 6,400 mm Indicated operating hours: 11,282 h Free lift: 2,000 mm Mast type: Triplex Mast height: 2,820 mm Length/Width/Height: 2,750 / 1,260 / 2,250 mm Operating weight: 5,240 kg ---- Equipment: * Overhead guard * 3rd hydraulic function * Semi-cab * Full free lift * Front work lights * Rear work lights * Impulse control ----- Attachments: * Sideshift ---- Further machine information: Beacon light Beacon light ---- The operating hours specified are generally the hours displayed/read from the meter. We are happy to offer you the right transport solution. An additional 250 - 300 forklifts, attachments, and sweepers are available immediately. Rental options also available! We are also interested in buying your OLD equipment. Any questions? You can reach us during our business hours from 7:30 a.m. to 4:00 p.m. We look forward to hearing from you! We speak English Itjdpfx Agjxg Ii Do Njn Interim sale and errors for this offer are expressly reserved. For dealer sales, the device is sold as is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: ready for operation (used), Year of construction: 2018, Control Unit Brand MAZATROL Additional Equipment Workpiece air blast / Air through spindle in running / High pressure coolant system (Europe) / Preparation for chip conveyor (right) Chip conveyor right hand Mayfran / Mazak monitoring system B (RMP60) / Manual pulse generator 1 (detachable) / Ethernet operation function / Signal tower (3 colors lights) Itsdpsxbup Tsfx Ag Njn This 5-axis Mazak VTC 800/30SR was manufactured in 2018 and features a robust 48-tool magazine, high-pressure coolant system, and a NC rotary table with 360,000 positions. Ideal for complex 5-axis machining with its advanced synchronization and interpolation capabilities. If you are looking to get high-quality milling capabilities consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, - Vacuum Exhaust filter, the chips no longer come into contact with Itedpfx Agewfq E Ie Nsn the fan wheel of the fan door. The chip garbage cans are permanently connected to the extraction system and internally vented. - Manufacturer: Nestro - Type: NA/T - Volume flow approx. 9,450m³/h - 5 dust garbage cans, rollable, - Number of filters: 180 pcs. - Filter surface: 63m³ - Previously operated with return air - Filter dimensions: 90 x 1200mm - Suction line connections D450mm with non-return flaps - Filter with pressure relief surface - Year of manufacture: 1997 - Filter cleaning by pulse compressed air - Compressed air 6bar Dimensions: - Length: 4,410mm - Width: 1,005mm - Height: 2,750mm- Volt/HZ: 400/50 - Fan power: 11KW - Location: in stock

Condition: new, Fanuc A06B-0266-B100 AC Servo Motor + A860-2000-T301 Pulse encoder, serial number as per photo, unused, 100% functional, scope of delivery as per photos Itsdpfxji D H Ado Ag Njn

Year of construction: 2025, condition: new, functionality: fully functional, Grain mill grinding turbine Stone mill for grain, pulses and spices Table machine Corundum ceramic grinding stone Output: approx. 200g / minute Grinding degree: Infinitely variable from very fine to coarse with built-in cooling fan Hopper capacity approx. 1.1 kg of grain Connection 220V, 600 watts Ijdpfx Aefxk Tusg Nstn Dimensions: 190 x 220 x 380 mm, WxDxH NEW machine exhibition / demonstration machine with warranty Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2020, operating hours: 1,336 h, load capacity: 1,600 kg, lifting height: 4,590 mm, free lift: 1,498 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, fork length: 1,150 mm, empty load weight: 1,237 kg, total length: 2,020 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 906xxxxx Load centre: 600 mm Mast type: Triplex Transmission: AC pulse control Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Polyurethane Front tyre size: Load rollers, polyurethane, single Rear tyre type: Polyurethane Rear tyre size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: Fully refurbished by the manufacturer, UVV safety inspection passed, sold without warranty/liability for material defects. Pulse control, full free lift, sensitive lifting and lowering on both sides, discharge monitor, hour meter, creep speed button, battery (overhauled by the manufacturer 06/2025) with Aquamatik system, external charger included, unit refurbished by the manufacturer. Iedpfexfm Dqex Ag Nstn

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, Charmilles ROBOFORM 550 Year of construction 2006 Construction: - short C-frame with fixed table - Automatically lowerable container Travel: X = 600 mm, Y = 400 mm, Z = 450 mm; Max. Workpiece dimensions (L x W x H): 1200 x 850 x 400 mm Max. Workpiece weight: 1600 kg Max. Electrode weight: 100 kg Min. /max. distance between table and quill: 150-600 mm Quill with automatic chuck of your choice (Erowa / 3R Systems); Incl. 16x electrode changer Incl. C-axis for rotation, indexing and erosion Max. Electrode weight: 100 kg ISOPULSE generator with 64 amps 12" touchscreen with keyboard and handbox Integrated connections: Ethernet RJ45, floppy disk drive, CD-Rom drive Itedpourk Dbofx Ag Nen Machine weight (net): 4400 kg Machine dimensions (L x W x H): 2750 x 3150 x 3000 mm The machine is currently still being used by our customer and will be dismantled by our specialist staff. After ordering, the Roboform will be cleaned, serviced and tested by us. Optional: - Transportation - Cooler - Dielectric - Commissioning

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 1 h, load capacity: 1,400 kg, lifting height: 4,455 mm, free lift: 1,534 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,150 mm, empty load weight: 1,100 kg, total length: 760 mm, drive type: Elektro, construction width: 770 mm, High-lift stacker Load center: 600 Mast type: Triplex Technical condition: New Front tire type: Polyurethane Front tire condition: 100% Rear tire type: Polyurethane Iedpfjxcckbex Ag Njtn Rear tire condition: 100% Battery voltage: 24V Battery capacity: 225Ah Battery year: 2024 Description: New machine Pulse control, CE certificate,

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 021176, Hartford Model Super HCMC1682 Vertical Machining Centres with FANUC 0iMD control system. INCLUDED FACTORY FITTED MACHINE OPTIONS 6,000 RPM SPINDLE - 26.0 KW #50 TAPER GEARED HEADSTOCK AIR SYSTEM - AIR GUN AUTOMATIC TOOL CHANGER - 32 STATIONS ARM TYPE EXCHANGE TOOL SHANK - BT50 CHIP SYSTEM - LINK TYPE CHIP CONVEYOR WITH PORTABLE CHIP BUCKET COOLANT SYSTEM - COOLANT FLUSHING SYSTEM COOLANT SYSTEM - COOLANT GUN CNC CONTROL OPTION - MEMORY 5000M COOLANT SYSTEM - THROUGH SPINDLE COOLANT 20BAR - CARTRIDGE FILTER AND PUMP NC ROTARY TABLE - 4TH AXIS INTERFACE HYD TANK NC ROTARY TABLE - GSA CNC400R NC ROTARY TABLE - 4TH AXIS DRIVE UNIT NC ROTARY TABLE - 4TH AXIS MOTOR LIGHTS - PATROL LAMP (3 COLOUR) GUARDING - FULL SPLASH GUARDING FOR VMC INC. TOP COVER (NEW DESIGN FOR DS) AUTOMATIC TOOL CHANGER - REAR SIDE TOOL LOADING MACHINE CONSTRUCTION & FEATURES One piece heavy duty cast iron bed construction for high accuracy & rigidity. Box way slides provide increased stability and rigidity. One piece spindle head for superior rigidity. 1,750mm x 820mm table surface. 18 M/min rapid traverse in all 3 axis. TABLE Working Surface 1,750 x 820 mm Tee Slot (Size x Number x Pitch) 18 mm x 5 x 150 mm Maximum Table Load 2,200 kg TRAVEL Longitudinal Travel ( X-Axis) 1,600 mm Cross Travel (Y-Axis) 820 mm Vertical Travel (Z-Axis) 660 mm Distance from Table Nose to Table Top 150 – 810 mm Distance from Spindle Centre to Column 865 mm SPINDLE Spindle Nose Taper #50 Spindle Speed 6,000 Rpm Geared Itjdpfx Ajw Dd Sfjg Nsn FEED Cutting Feedrate 10 M/min Rapid Traverse (X,Y and Z-Axis) 18 M/min ATC Tool Storage Capacity 24 Arm Type Std. [ 32 – 40 ] Maximum Tool Weight 20 kg Maximum Tool Diameter Ø 125 mm Maximum Tool Length 350 mm Tool Shank BT-50 [BBT-50] Pull Stud Bolt P50T-1[MAS P50-1] MOTOR Spindle Drive Motor (Fanuc) 22kW X-Axis Drive Motor (Fanuc) 4 kW Y-Axis Drive Motor (Fanuc) 4 kW Z-Axis Drive Motor (Fanuc) 4 kW POWER SUPPLY Electric Power Consumption 30 KVA Air Pressure 6.5 kg/cm² Voltage 415V/50Hz/3 ph MACHINE Floor Space (Fully Guarded) 4,000 x 3,257 mm Height 3,267 mm Weight 11,100 kg STANDARD SUPPLIED MACHINE FEATURES Fully enclosed splash guard Fluorescent lamp Cooling system Air blast through the spindle Centralized automatic lubrication system Levelling bolts and blocks Oil fluid separator Remote manual pulse generator Two internal screw type chip conveyors Convection heat exchanger in the control Coolant jets around the spindle operation Auto power off Finish lamp RS-232 interface Operator control panel Operation and programming manuals Electrical and mechanical manuals

Condition: ready for operation (used), Bosch SM 20 / 30 GTC - SM 20/30 GTC pulse inverter, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Itodji D Udcspfx Ag Nen

Condition: new, functionality: fully functional, machine/vehicle number: HHKHB111CF0000579, Year of construction: 2023, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,753 mm, fuel type: electric, mast type: triplex, construction height: 2,462 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift truck Chassis number: HHKHB111CF0000579 Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New machine Technical condition: New Front tires type: Superelastic Rear tires type: Superelastic Battery Volt: 48V Battery Ah: 720Ah Battery Manufacturer: GBD Iodpfjwvcitsx Ag Netn Battery year of construction: 2023 Description: NEW - immediately available Sideshift, 3rd valve, 4th valve, rear working lights, front working lights, load protection grille, pulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2020, operating hours: 250 h, load capacity: 1,000 kg, lifting height: 2,700 mm, free lift: 100 mm, fuel type: electric, mast type: standard, construction height: 1,850 mm, fork length: 1,150 mm, empty load weight: 731 kg, total length: 1,822 mm, drive type: Elektro, construction width: 800 mm, High-lift stacker Chassis number: 906xxxxx Load centre: 600 mm Mast type: Standard Transmission: AC-impulse Condition: Refurbished without warranty Technical condition: very good Front tyre type: Polyurethane Front tyre size: Load rollers, single polyurethane Rear tyre type: Polyurethane Rear tyre size: Drive wheel, polyurethane Ijdpfx Aexfcxdog Njtn Battery voltage: 24V Battery capacity: 150Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2020 Description: Serviced, technically and visually overhauled, UVV safety inspection passed, operating hours are genuine, no warranty/liability for material defects Impulse control, CE certificate, Load guard (detachable), lifting and lowering on both sides, hour meter, discharge monitor, creep speed button, battery (04/2020) with Aquamatics, built-in charger, hours are genuine

Condition: excellent (used), Year of construction: 2011, Cloos Qirox robot QRC 320 incl. control unit V 6, Offline laser ( instead of gas nozzle sensor for fast search process, arc seam search, spot editor Quinto II 603 welding machine (600 A pulse machine), wire feeder, Iedpfeizklnox Ag Nstn 1 workpiece manipulator HWR 30000, 2 workstations, pick-up weight per station 2500 kg, face plate distance 4500, turning radius 750 mm Floor track with C stand, travel distance 4 m, for suspended arrangement of the robot Light barrier, start preselection Option: conversion from 320 to 350 ( enlargement of working area possible)

Condition: good (used), Model 200/4 FIXED ANGLE TO 90º Itodpfx Aep R Sr Iog Njn Main Technical Data Blades length 200 mm Maximum thickness R=42 Kg/mm² Maximum thickness R=60 Kg/mm² Strokes/min. at 250 mm of cutting lentgh 52 Three phase motor 3 HP Tank oil capacity 35 l Working table 750 x 530 mm Dimensions (L x W x H) 750 x 600 x 1.020 mm Approximate weight 480 kg - Blade clearance adjustment automatic for thickness from 0,5 to 4 mm - Automatic operation by means pedal or by impulse - Mechanical adjustment of vertical travel

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 12010, Hartford model BLOCKBUSTER PRO-4210-S travelling table, double column CNC vertical machining centre. With Fanuc 18iMB control Heavy Cast Iron Construction Heavy Duty Hardened & Ground Solid Slideways Table Traverse (X) - 4,050 mm Cross Traverse (Y) - 2,100 mm Ram Traverse (Z) - 780 mm Table Area - 4150 x 2040 mm Rapid Traverse Rates (X,Y,Z) - 12,000 mm/min Full Splash Guarding System Coolant System Electrical Cabinet Ventilation System Spindle Oil Cooler Twin Screw Type Swarf Augers, Link Type Chip Conveyor & Chip Bucket Auto Power Off Remote MPG Full Splash Guard (CE) Link Type Chip Conveyor & Bucket Coolant System Auto Power Off Centralized Auto Lubrication Remote Manual Pulse Generator Spindle Oil Cooler 3 Axis Absolute Encoders Oil/Coolant Separation System Rigid Tapping Work Lamp Levelling Blocks & Bolts Spindle Air Blast Handbooks & Electrical Drawings Isdpfjw Dd D Usx Ag Njtn Operation Finish Lamp Foot Switch for Tool Clamp/Unclamp Drum/Rack Type ATC RS-232 Interface Screw Type Swarf Augers 4th Axis Preparation Rotary Table - Golden Sun CNCB631RV 4th axis rotary table with Hydraulic clamping and with 25” chuck, 10” bore size and Spindle Tailstock with 10” bore and 25” 3 Jaw Chuck. Spindle nose taper to DIN 69871 X TRAVEL 4050 mm Y TRAVEL 2100 mm Z TRAVEL 780 mm DISTANCE OF SPINDLE NOSE TO TABLE 225 - 1005 mm WIDTH BETWEEN COLUMNS 2300 mm TABLE WORKING SURFACE 4150 x 2040 mm MAX. TABLE LOAD 10000 Kgs SPINDLE DRIVE MOTOR (FANUC) 26 Kw MAX. SPINDLE SPEED (GEARSHIFT) 6000 Rpm SPINDLE NOSE TAPER BT50 CUTTING FEEDRATE (X/Y/Z) 7000 mm/min RAPID TRAVERSE RATE 12,000 mm/min AXIS DRIVE MOTORS (X/Y/X – FANUC) 9.0 / 7.0 / 4.0 Kw DRUM/RACK TYPE TOOLCHANGER 20 Stations MAX. TOOL WEIGHT 15 Kgs MAX. TOOL DIMENSIONS 125 Dia x 350 mm MACHINE WEIGHT 35,500 Kgs FLOOR SPACE 11500 x 6050 mm

Condition: ready for operation (used), Fanuc A06B-0371-B077 AC Servo Motor , with A860-0365-T001 Serial Pulse Coder ? I64 , serial no. according to photo , hole spacing of mounting holes: 71 x 71 mm, Ø drive shaft: 10-11 mm (conical) ,used, normal signs of wear, 100% functional, scope of delivery according to photos Isdpfoi D H Ecex Ag Nstn

Condition: used, functionality: fully functional, machine/vehicle number: HHKHFY11TF0000721, Year of construction: 2022, operating hours: 750 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,462 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork length: 1,200 mm, empty load weight: 3,726 kg, total length: 2,010 mm, drive type: Elektro, construction width: 1,105 mm, Electric 3-wheel forklift Chassis number: HHKHFY11TF0000721 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: As good as new Technical condition: very good Front tires type: Non Marking Rear tires type: Non Marking Battery voltage: 48V Battery Ah: 725Ah Itjdpfjtzg I Iex Ag Nsn Battery year of manufacture: 2022 Side shift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, half cabin, load protection grille, impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, machine/vehicle number: 905xxxxx, Year of construction: 2019, operating hours: 805 h, load capacity: 1,400 kg, lifting height: 2,900 mm, free lift: 100 mm, fuel type: electric, mast type: standard, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 1,126 kg, total length: 1,988 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Ijdpfx Agexfcw To Njtn Chassis number: 905xxxxx Load center: 600 mm Mast type: Standard Transmission: AC impulse Condition: Refurbished, without warranty Technical condition: Very good Front tire type: Polyurethane Front tire size: Load rollers, single polyurethane Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2019 Description: Serviced, technically and visually refurbished, safety inspection (UVV) carried out, genuine operating hours, without warranty/liability for material defects Impulse control, CE certificate, lifting and lowering possible on both sides, discharge monitor, hour meter, creep speed button, battery (06/2019) with aquamatic, matching external charger included

Condition: used, WIG and electrode inverter welding unit ESS Type 170 ATG (AC-DC) TIG welding machine Serial No. Year of manufacture: 2007 TIG output 170 amps = 35% duty cycle 130 amps = 60% duty cycle 110 amps = 100% duty cycle Electrode output 140 amps = 35% duty cycle Mains supply 230 Volt, 50 Hz - DC and AC welding - HF ignition - stepless power adjustment - 2-stroke and 4-stroke operation - pulse welding mode - stick electrode operation - 8 meter hose package with TIG torch - shielding gas pressure regulator Itedpfx Agertvi Uo Njn - fan cooling - portable Equipment dimensions (L x W x H) 400 x 270 x 500 mm Weight 26 kg The welding test shows very good results when welding stainless steel with DC current and very good results when welding aluminium with AC current. Overall in very good condition.

Condition: used, functionality: fully functional, machine/vehicle number: 905xxxxx, Year of construction: 2018, operating hours: 4,069 h, load capacity: 1,200 kg, lifting height: 2,500 mm, free lift: 100 mm, fuel type: electric, mast type: standard, construction height: 1,750 mm, fork length: 1,150 mm, empty load weight: 1,002 kg, total length: 1,967 mm, drive type: Elektro, construction width: 800 mm, High lift pallet truck Chassis number: 905xxxxx Load center: 600 Mast type: Standard Itjdjxfcw Hjpfx Ag Nsn Transmission: AC impulse Condition: Refurbished without warranty Technical condition: Very good Front tires type: Polyurethane Front tires size: Load rollers polyurethane single Rear tires type: Polyurethane Rear tires size: Drive wheel polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: Jungheinrich Battery type: PzS Battery year: 2024 Description: Refurbished by the manufacturer, UVV-inspected, without warranty/liability for defects Pulse control, dual-sided lifting and lowering, discharge monitor, hour meter, creep speed button, battery (01/2024) with aquamatic system, built-in charger, refurbished by the manufacturer

Condition: used, WIG and Electric Inverter Welding Machine ESS Type Transtig 231 (DC) WIG Welding Machine Serial No. Year of manufacture: 2007 WIG output: 225 A = 40% duty cycle 180 A = 60% duty cycle 140 A = 100% duty cycle Electrode output: 180 A = 50% duty cycle Power supply: 400 Volt, 50 Hz, 16 Amp plug - DC welding unit - stepless power adjustment - 2-stroke and 4-stroke operation Iedpfjrtvi Rex Ag Netn - HF ignition - pulse welding mode - stick electrode mode - water-cooled - 8 meter WIG hose assembly with hand torch - shielding gas regulator - operating manual Space requirement (L x W x H): 1000 x 450 x 710 mm Weight: 90 kg The welding test produced very good results when welding stainless steel with DC. Otherwise in very good overall condition.

Condition: used, functionality: fully functional, machine/vehicle number: 710248xxxxxx, Year of construction: 2006, operating hours: 925 h, load capacity: 1,400 kg, lifting height: 4,266 mm, free lift: 1,390 mm, fuel type: electric, mast type: triplex, construction height: 1,920 mm, fork length: 1,190 mm, empty load weight: 1,418 kg, total length: 2,010 mm, drive type: Elektro, construction width: 880 mm, High-lift stacker Chassis number: 710248xxxxx Load center: 600 mm Mast type: Triplex Isdpfx Aexd Ifysg Netn Transmission: Impulse Condition: Refurbished without warranty Technical condition: Very good Front tires type: Vulkollan Front tires size: Vulkollan tandem load wheels Rear tires type: Vulkollan Rear tires size: Vulkollan drive wheel Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: IBV Battery type: PzS Battery year of manufacture: 2025 Description: serviced, technically and visually refurbished, passed UVV inspection, new battery installed in 07/2025, sold without warranty/liability for defects Impulse control, initial lift, full free lift, CE certificate, discharge indicator, hour meter, battery (07/2025) with aquamatics, matching external charger, rental unit (hours are genuine)