Used Punching Metal for sale (35,623)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Gsdpfxsykt N Sj Adbeip Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Year of construction: 2001, condition: like new (used), machine/vehicle number: ECB1101424575, metal detector checkweigher 2001, stainless frame, Aperture 330mm x 120mm, belt width 200mm, overall length 2500mm, weigh bed 400mm x 250mm, with pneumatic rejects and bins Giodsdwhkmspfx Adbep

Condition: good (used), functionality: fully functional, Year of construction: 2008, operating hours: 41,804 h, Used TRUMPF TruMatic 6000 (K01) – Medium format Technical data: Year of manufacture: 2008 Last maintenance: 18.03.2025 Laser TrueFlow 2000 with laser power: 100-2,000 watts NC operating hours: 41,804 Resonator hours: 14,466 Beam-on hours: 2,054 Y-axis: 1,300 mm Additional equipment: various tools Gisdpfx Adswkd Efjbjp Recently installed new parts: Conversion to TASC5 laser control (01/2025) Control panel with display (01/2025) Box PC (01/2025) Hydraulic punching head/multilayer (10/2021)

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Gedpfxsymfbfo Adbeip Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 Gisdsymfa Uspfx Adbep - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2015, condition: used, Year of manufacture: Mar 2015 New: No 5 stuks gebruikte trailerbanden 385/65 R 22.5 7/8/9 mm. Gjdpsypb Hiofx Adboip

Year of construction: 2018, condition: excellent (used), functionality: fully functional, 1 x Fortress Technology metal detector with diverter reject system, for bottles/jars. Model - STEALTH. Gjdpfxsyigiao Adbsip Serial number - ES3692. Aperture dimensions - 150mm wide x 250mm high. Belt dimensions - 1800mm long x 100mm wide. Belt type - modular intralox.

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw -Manufacturer: Mössner Rekord, vertical band saw type SM/420 with saw band welder -Cutting width: max. 400 mm -Cutting height: max. 230 mm -Motor power: 1.1/1.7 KW -Voltage: 380 volts, 50 Hz, 4.6/3.6 A -Band saw: length 3150 to 3260 mm -Band saw speed: adjustable -Work table: pivotable in 2 axes: -Band saw welder: Ideal BSO -Dimensions: 940/750/H1850 mm -Weight: 548kg Gisdshvtcijpfx Adbop

Condition: used, functionality: fully functional, Year of construction: 2016, actuation type: pneumatic, sheet thickness (max.): 3 mm, overall weight: 6,700 kg, working length: 3,200 mm, Equipment: CE marking, We are offering a very well-maintained Schröder PowerBend Professional 3200/3.0 for sale. The machine is in excellent condition and immediately ready for operation. • Year of manufacture: 2016 • Working length: 3,200 mm • Bending capacity: 3.0 mm (Rm 400 N/mm²) • Rated power: 12 kVA Gsdpfx Adeytnvrebeip • Pneumatics: 6 bar • Weight: 6,700 kg • Operating cycles to date: approx. 310,000 bends • Location: 49170 Hagen a.T.W. The control system was recently renewed and is state-of-the-art. The machine is fully operational and can be inspected by prior arrangement. Other information: - Sale as seen - Viewing and collection in Hagen a.T.W. possible by prior arrangement - Location: Hagen a.T.W. - Sale by company → without warranty & liability, subject to errors

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Gjdpfov Nwwaox Adbsip Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: ready for operation (used), optionally in combination with an oval riveting machine of the same brand/age; see our other advertisement Gijdpox Nfhlefx Adbop

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Gedpfx Ajud Rhvedboip Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: ready for operation (used), In use from 1991 until it was last used and has been little prone to problems despite being a 1990s Chinese punching and riveting machine for oval eyelets. Gsdpfxsx Nd U De Adbjip

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Gsdpfstyqizox Adboip Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Gijdpohmmfkjfx Adbep Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Giedpfx Adok S Htxebjp Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm Giodpfjrz Tutsx Adbsp - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, Price: On request Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Documentation available: No - CE certificate present: No Gjdjwnhd Hspfx Adboip - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Options: Length stop Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,800 mm, total width: 1,000 mm, total height: 2,000 mm, Empty weight: 2.000 kg Price: On request Thickness 45 mm Maximum pressure 70 tons Punch cutting machine Model: Hydraulic Giodpow Ryxmofx Adbjp Manufacturer: GEKA Type: Hydracrop 70S Power: 70 tons Cutting round: 45mm Cutting beam: 45mm Cutting plate: 450x15mm Cutting corners: 250x6mm Incl. multiple punches Machine-afmetingen: 1800x1000x2000mm Machine weight: 2000kg - Documentation available: No - CE certificate present: No - Drive: Hydraulic - Punching force [ton]: 70 - Notching width [mm]: 250 - Max. plate thickness notching [mm]: 6 - Round bar cutting capacity [mm]: 45 - Shearing width [mm]: 450 - Max. plate thickness shearing [mm]: 15 - Transport dimensions: 1800mm x 1000mm x 2000mm (l x w x h) - Transport weight [kg]: 2000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2019, total height: 2,050 mm, overall weight: 4,500 kg, travel distance X-axis: 260 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 100 mm, number of axes: 3, This 3s Matsuura Lumex Avance 25 hybrid metal printer was manufactured in 2019. It features a hybrid system combining metal laser sintering and high-speed milling, with a maximum workpiece size of 250 × 250 mm and a table load capacity of 90 kg. The spindle speed ranges from 450 to 45,000 rpm, accommodating a tool magazine of 20 tools. Consider the opportunity to buy this Matsuura Lumex Avance 25 metal 3D printer. Contact us for further details. Gedpfxjyhcxko Adbeip • Working hours: 2,000 h • Technology: Hybrid system (metal laser sintering + high-speed milling on a single platform) • Laser type: Yb fiber laser • Laser power: up to 400 W • Layer thickness: 0.05 mm • Build/work area: • Max workpiece size: 250 × 250 mm • Table size: 270 × 270 mm • Axes/travels: • U-axis (sintering table): 185 mm • W-axis (powder blade): 522 mm • Spindle (milling): • Tool holder: BT20 (special Matsuura taper) • Tool magazine: 20 tools • Accuracy: • Positioning accuracy (X/Y/Z): ±0.0025 mm • Repeatability (X/Y/Z): ±0.001 mm • Materials (typical): Tool steels, maraging steel; stainless steels (e.g., 316L, 630); titanium alloys (Ti‑6Al‑4V, Ti‑6Al‑7Nb) • Machine data: • Power supply: AC 200/220 V, 50/60 Hz • Installed power: approx. 39 kVA • Inert gas: Nitrogen / Argon

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE Giodpfx Adex I S N Hsbsp • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. • Milling spindle swivel range: ±45° • Spindle and tooling • Milling spindle drive power (DC motor): 50 kW • Spindle diameter at front bearing: 160 mm • Internal tool holder: ISO 50 (DIN 2079) • External tool holder: ISO 60 • Tool clamping: manual via M24 threaded rod • Speeds and torque • Spindle speeds: infinitely variable, 2 ranges, 50–500 rpm • Range 1: 50–250 rpm • Range 2: 100–500 rpm • Stage increment: 1:2 • Constant power range: 160 rpm • Max spindle torque: 2,000 Nm • Max spindle swivel speed: 2°/sec • Feeds • Milling feed in X: 40–4,000 mm/min (infinitely variable) • Rapid traverse X: 8,000 mm/min • Adjustment speed Y/Z: 20–500 mm/min (infinitely variable) • Rapid traverse Y/Z: 1,000 mm/min • Accuracy • Display/positioning accuracy (3 axes): 0.1 mm • Electrical • Operating voltage: 380 V, 50 Hz • Control voltage: 220 V • Distances and dimensions • Clamping table to retracted, horizontal spindle axis: 500 mm • Cheek support (floor) to spindle center in vertical center position: 1,300 mm • Clamping table to center of support guide: 2,300 mm Gsdpfx Ajx I S Rqedboip • Length of cheek and support guide: 16,800 mm

Condition: not inspected (used), Year of construction: 2008, operating hours: 32,164 h, functionality: unexamined, machine/vehicle number: 3201250, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, workpiece length (max.): 2,695 mm, workpiece width (max.): 1,524 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item between 23/03/2026 and 27/03/2026! The machine is also equipped with a cutting function (see pictures)! TECHNICAL DETAILS Maximum tensile strength stainless steel: 600 N/mm² Sheet thickness stainless steel: 0.5 mm – 1.25 mm Typical sheet thickness stainless steel: 1.0 mm Maximum tensile strength steel: 410 N/mm² Sheet thickness steel: 0.5 mm – 2.0 mm Typical sheet thickness steel: 1.5 mm Maximum tensile strength aluminium: 265 N/mm² Sheet thickness aluminium: 0.5 mm – 3.0 mm Typical sheet thickness aluminium: 1.5 mm Sheet dimensions Length: 405 mm – 2,695 mm Width: 190 mm – 1,524 mm Maximum diagonal: 2,800 mm Maximum centering dimension: 2,500 mm Gisdpfx Adoycqucobsp MACHINE DETAILS Hydraulic System Base machine oil capacity: approx. 500 dm³ Shear lift table oil capacity: approx. 20 dm³ Cooling System (Closed) Cooling unit R81: approx. 175 liters Cooling unit R101: approx. 260 liters Service Connections Mains voltage: 400 V Frequency: 50/60 Hz Connection cross-section: 4 × 25 mm² Pre-fuse: 80 A Average current: 42 A Power consumption: 24 kW Control voltage: 24 V AC/DC Industrial PC / Monitor / Power supply units: 220 V AC Open Cooling System Cooling water requirement: approx. 2.0 m³/h Max. inlet temperature: 20 °C Compressed Air Required pressure: 6 – 12 bar Max. air consumption at 6 bar: approx. 2,275 Nl/min Dimensions & Weight Required space (L × W × H): approx. 18,000 × 11,500 × 3,500 mm Transport width: Up to approx. 3,000 mm Total weight (without oil): approx. 27,760 kg Heaviest component (bending machine): approx. 20,040 kg Operating hours: 32,164 h Robot Manufacturer: KUKA Model: KR 150 L110-2 2000 Year of manufacture: 2008 Weight: 1,285 kg Note: Robot has been modified for use with a magnetic lifter SCOPE OF DELIVERY Available manuals Various spare parts in wooden crates

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, cutting force: 900 t, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Gijdpfx Adexg Ekfsbjp

Year of construction: 1987, condition: good (used), 1 used die-cutting and embossing platen with additional automatic feeder Rabolini Imperia Gold, year of manufacture 1987 Gedsyttuaspfx Adbsip