Used Punching Tools for sale (37,397)

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Chodpfx Afjxnmirslsf Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: as good as new (ex-display), Year of construction: 2024, Punching force 500 kN Max. Punching capacity Ø 27 in 13 mm throat depth 130 mm Motor power 3.0 kW Stroke rate with 20 mm stroke 25/min Maximum stroke 30 mm Chedpfx Asxyy Apeflof Weight 295 kg

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Chjdpfx Afexc Ep Tolsf

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, ram adjustment: 150 mm, table length: 2,000 mm, table width: 1,200 mm, pressing force: 250 t, stroke adjustment: 40,200 mm, overall weight: 55,000 kg, DGUV certified until: 09/2026, Raster punching and forming press RSU 2500 - 2000 P Desch compact drive unit Electronic press force measurement system Hydraulic overload protection system 3-piece tie rod cast construction Cjdpfjxcbbrjx Aflohf Tool holder Table and ram clamps Raster VWA hydraulic roller feed, band width 500 mm, with Topochrom roller coating Ram area 1000 x 2000 mm Strokes: 20 - 150 1/min Stroke adjustment: 40 - 200 mm Optional with Kohler strip feeding system 20030.400/9-2000.2H Optional with Kaschwig soundproof cabin

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 901116, 110 x 160 cm Inner frame width Net price ex works, without disassembly and transport MANUFACTURER'S PRODUCT DESCRIPTION (see also photos): Versatile and universal production machine for die cutting – creasing – scoring – embossing, and perforating all types of paper – cardboard – solid board – corrugated board – displays plastic films – semi-cutting – gaskets – etc. Compact design – highest precision – quiet, smooth operation – high hourly output Maximum occupational safety 10 format sizes available Both the base and moving platen frames are welded steel constructions manufactured from single pieces. Bearings are made of bronze in special steel; shafts, tie rods, and helical gears are made of high-grade steel. The ultra-precise eccentric bushes allow for extremely fine pressure adjustment. The eccentric bushes themselves are locked in place by safety gears, effectively preventing unintentional adjustment. The spacious opening and three end positions of the platen facilitate easy feeding and removal, allowing for high average hourly throughput. The guide support is low-maintenance. Continuous operation, single, or skip feed can be selected. Moulding accuracy is especially high with balanced balls. Individual knives can be held for unchanged material without heavy sheet laying. Waste material and corresponding turnover are reduced. All pressure bars are mounted on a mechanically infinitely adjustable auxiliary bridge. Open working area is crucial not only for trouble-free feeding and precise die plate positioning but also for immediate waste ejection and clear view of the belt sleds and feeding rollers. Cutting pressure is transferred via the diameter of the cutting wheels onto several large blocks which are seated against their corresponding bases, ensuring the die-cutting process is unified with the machine base. Cedpfoxy Rptex Aflshf Power transmission and braking are handled by an electro-pneumatic clutch; a compressor with air reservoir is included. Centralized lubrication system is installed. All pneumatic locking devices are fully integrated. When operating in timer mode, a yellow warning light above the machine is illuminated. An additional safety bar above the closed platen edge stops the platen instantly when activated. The control cabinet beside the machine prevents vibration of the electrical components.

Year of construction: 2007, condition: ready for operation (used), Punching force: 165kN, max. sheet thickness: 6mm, max. sheet weight: 150kg, max. punching diameter: 76mm, strokes punching/marking: 600/1300 strokes/min, simultaneous speed: 100m/min, working dimensions X/Y: 2000mm/1250mm, tool stations: 15. Machine dimensions X/Y/Z: approx. 6000mm/6000mm/2200mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Codpfx Aexxzhwoflohf

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: M-1581, The Mühlbauer CP 2005 is an industrial punching machine designed for processing card blanks (e.g. smart cards, plastic cards) as part of card production and finishing operations. It combines precision, reliability, and efficiency – qualities that make it ideally suited for production environments with high demands. Key features: High-precision card punching The machine feeds card blanks through a punch-and-die tool, punching the cards to exact dimensions. This ensures clean, uniform end products. Hydraulic drive system A hydraulic system controls the position and speed of the punch – providing consistent precision and extended tool life. Modular & customizable tool design Tools can be custom-made or adapted to different card formats or special requirements, keeping the machine highly versatile. Robust construction & continuous operation capability The CP series from Mühlbauer is renowned for high throughput and continuous operation – ideal for industrial card printing and punching installations. Efficient material handling Cjdpfxsx Aiapo Aflehf Card material feeding and punching are designed so that cards can be processed further or stacked directly after punching – for example, for lamination, personalization, or packaging. Typical applications: - Manufacturing of smart cards, chip cards, or plastic cards - High-volume production in the card industry - Production of cards for ID badges, access cards, identification cards, etc. - Industrial operations demanding precision, repeatability, and stable processes

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, punching force: 55 t, throat depth: 500 mm, sheet thickness steel (max.): 20 mm, working height: 1,000 mm, overall weight: 1,200 kg, total length: 1,300 mm, total width: 800 mm, total height: 1,800 mm, power: 5.5 kW (7.48 HP), mount diameter: 40 mm, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Csdpfx Aoxyy Aiofljhf Machine weight with throat depth 500: 1150 kg

Year of construction: 2008, operating hours: 24,490 h, condition: ready for operation (used), General Data Machine weight 13000 kg Measurements height 2082 mm Control Unit Brand AMADA Model AMNC-F Dimensions Machine Length 4165 mm Csdexzlr Sepfx Aflshf Main Drive Punching force 200 Kn This AMADA AC2510 NT was manufactured in 2008. It features a punching force of 200 kN and a turret capacity of 51 stations. It can handle sheet sizes up to 1270 × 5000 mm and thicknesses up to 3.2 mm. The machine supports a maximum sheet weight of 150 kg and offers high-speed turret indexing. If you are looking to get high-quality punching capabilities, consider the AMADA AC2510 NT machine we have for sale. Contact us for more information. Application Types Punching

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Chedpfx Aexf Utasflsf Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Year of construction: 2003, pressure max. 8,24 BAR Receiver 2,8 L Temperature range max. 50°C - min. 0°C °C In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Csdpfjw S Nk Usx Aflshf Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Kann zum Stanzen von Papier, Pappe und Aluminimum eingesetzt werden. Can be used for punching Paper, Cardboard and Aluminum. Cedpfsxu N Evox Aflohf Stanzmaschine / Punching machine Krause FY 43 UB  Serial-No. 313200 Arbeitsbreite / Working width max. 400mm Zum Stanzen von Papier, Pappe und Aluminimum For punching Paper, Cardboard and Aluminum. 2 Hand-Auslösung / 2 Hand release mit Fußschalter pneumatisch zum Fixierung des Produktes with pneumatic foot switch for fixing the product Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2022, condition: good (used), Fully automatic die-cutting + creasing of folding boxes Magnopro I-CUT12090 Year of construction 2022 Codet Twnvepfx Aflohf Connection 230 V Material thickness depending on model: 10 mm Data format PLT, DXF, HP/GL, PDF, EPS Sheet feeder Suction air/unrolling device (optional) max. format: 90 x 120 cm Dimensions W x D x H: 320 x 150 x 115 Alignment CCD camera system Speed up to 1000 mm/sec Positioning suction belt Programming Barcode reader, QR code Accuracy +/- 0.1 mm Sheet and roll feeder !

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL2 for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Pipe notcher for pipes with outer diameter Ø48.3 (1 1/2″) and Ø60.3 (2") mm Chedoxyyynspfx Afljf Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 15 kg

Condition: repair required (used), 3-column press Installation dimensions: W 350 mm x L 200 mm x H 250 mm incl. roller feed Chodpsxxm Aaefx Aflof

Condition: used, Pallet 25-Piece Contractor Power Tools - Cutting and Drilling Tools | Used Small Equipment ❓ Want the expert inspection report with 0 checked points, 24 extra photos and a full video? Contact us! 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format. Chodex A Dixepfx Aflsf

Condition: used, Year of construction: 2022, controller manufacturer: Sonstige, controller model: AMNC-3i, _____ Description: Control : Sonstige AMNC-3i Movement X/Y/Z : 3000/1500 mm Technical data Punching machine:EMK-3612MII (58) Punching force:300 kN Positioning accuracy:± 0.1 mm Number of tool stations:58 Machine frame:Bridge frame Machine table type:Brush table Punching drive:Servo-electric dual drive Cjdpfexvv Tvox Aflshf Travel range (X x Y):1525 x 3050 mm Control:AMNC-3i (21.5" screen size) Features :Punch & forming function :Good parts flap :scrap conveyor system Dimensions Length:5436 mm Width:6212 mm Height:2342 mm Weight:21500 kg

Condition: used, Year of construction: 1993, functionality: fully functional, Speed: up to 8,000 sheets per hour Chjdpfxox Anvpe Afljf Format (cm): max. 102 x 72 // min. 40 x 35 Die-cutting force: up to 2.5 MN (250 t) Operating hours: approx. 38,000 hours Equipment / further details: Stripping system (stripping station) with centering frame Tools

Condition: good (used), Year of construction: 1991, General Features: • Age: 1991 • Punching/Die-Cutting size: 220 x 260mm • Heavy-duty German industrial design • Solid cast-iron frame for high cutting precision • Electric drive system suitable for continuous production Codpfx Aoxxlbhsflehf • Designed for commercial printing and finishing operations • User-friendly operation • Long lifetime typical of BUSCH guillotines Included: • Standard documentation (if available) • Machine as inspected at current location Condition: • Good working condition for its age • Can be tested under power • No known issues reported • Clean mechanical condition typical for BUSCH machinery

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI pipe notcher AL1 for pipes with an outer diameter of Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Pipe notcher for pipes with outer diameter Ø26.9 (3/4″), Ø33.7 (1″) and Ø42.4 (1 ¼") mm Chsdpfx Asxyyyheflsf Easy to attach to the wall Ideal for double corner connections Wall thickness max. 3 mm steel, 2.5 mm VA, weight 8 kg

Condition: new, For sale is a complete rack with ejector pins in various diameters as shown in the photos. Cjdpfxjxwum Dj Aflehf No individual sale, only as a complete set including the rack.

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Chjdpexgv E Tsfx Aflsf Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 647-230, Lid Punching machine without tools Type Hamba 647-230 foil width - 230 mm very good condition Codpfx Asxqg T Njflshf - with used embossing calender for worm structure - Power connection: 220/380V - three phases - Additional punching tools available - e.g. 1x 2-fold tool - diameter 80.50mm 2x 2-fold tool - diameter 75.50mm 1x 2-fold tool - diameter 59.54mm 1x 2-fold tool - diameter 93.80x120.90mm

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Working hours: approximately 38,000 hours Equipment / Additional information: Stripping system (stripping station) with centering frame Die-cutting plates (over 500 pieces) Tools Technical data Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Running speed/hour: Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Csdpfjxixhiex Afljhf Gross weight: 25000 kg

Condition: new, Year of construction: 2025, functionality: fully functional, ALMI AL-U for zinc spout in pipes with outer diameter from Ø22 to Ø76 mm Pipe notch for zinc spout in pipes with outside diameters Chedoxyyx Ropfx Aflof diameter from Ø22 to Ø76 mm for cutting out vent slots from round and rectangular metal pipes from rectangular metal pipes from 22 mm outer diameter Easy to attach to the wall Wall thickness max. 3 mm steel, 2.5 mm VA, weight 7 kg