Used Push Lawn Mower for sale (1,334)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) Hnodpfsz Ip S Hsx Andju F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse.

Condition: used, operating hours: 29 h, Description: BOBCAT E27 Z 29 short-tail excavator, demonstration model, quick coupler 29, operating hours like new, TOP condition!! * First commissioning in 2026 * Standard equipment * TOPS/ROPS cabin with heater * 1,500 mm dozer blade * 300 mm rubber tracks * Long dipperstick * Heavy counterweight * Hydraulic bolt-on quick coupler LA with E27z2 cabin, with AUX5 * Automatic idle * LED work lights on the front and rear of the cabin * Floating function for the dozer blade Hjdpfxoz Hd Due Andenu * Adjustable double-acting auxiliary hydraulics with quick couplings * Battery disconnect switch * Pre-installation for hydraulic clamp * Control console lock * Hydraulic monitoring with shut-off * Foldable and ergonomic pedals * Warning tone when the fuel tank is full * Grease gun holder * Horn * Proportional auxiliary and swing hydraulics control via push button * Automatic safety belt * Suspension seat with high backrest * Two travel ranges with automatic transmission * Four mounting points on the upper carriage Technical specifications: * Diesel engine D1105-E4B-BCZ-1 (Kubota) * 15.3 kW at 2,400 rpm * Cooling: Water * Hydraulics: Total flow rate: 86.8 l/min * System relief pressure for auxiliary hydraulic circuits: 180 bar * Auxiliary hydraulic flow: 50.0 l/min * Digging depth with long dipperstick: 2,847 mm * Max. speed, low range: 2.5 km/h * Max. speed, high range: 4.3 km/h * Operating weight: approx. 2,700 kg (cabin + heater) * Quick coupler M503 with lifting hook * Swivel bucket, hydraulic, 1,200 mm * 2 years Bobcat manufacturer's warranty or 2,000 operating hours. Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make changes and sell the item in the meantime!

Condition: excellent (used), Year of construction: 2016, Ref:11127 . 2016 SCS Automaberg Trim & Perf Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Recently serviced (at a cost of £5k). A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. Hjdpjzmx Scefx Andsnu DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. TOOLING, PLEASE NOTE: The machine only comes with the pre trim device. Also includes the metal caddie to hold various dies so you can easily swap in different wooden steel rule dies as required. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg Hedoyq Szmjpfx Andenu range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm Hnodjw Nafkspfx Andju - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, mileage: 33,596 km, power: 74 kW (100.61 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,700 kg, maximum load weight: 2,300 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,333 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, German vehicle, first owner, LADOG T1400, condition as shown in photos, original mileage of only 33,596 km, only 5,333 operating hours. Three-way tipper with Fassi crane mounted behind the cab, Fassi crane model F28B.22, hook height 8 m. Lifting capacities: 1.85 m = 995 kg, 3.10 m = 765 kg, 4.30 m = 545 kg, 5.50 m = 395 kg. Equipped with 5th and 6th hydraulic control circuits, 2 hydraulic outriggers, height-adjustable municipal work platform with hydraulic connections, four-wheel steering, EasyDrive (hydrostatic drive), 2 trailer hitches, trailer load 3,500 kg. Tipper dimensions: length = 2,100 mm, width = 1,400 mm, height = 300 mm. Aluminum side panels, Dücker UNA 200 flail mower available at extra cost, high bulkhead, power steering, differential lock, 2 comfort seats, roof hatch, rear window, sliding window, municipal lighting and headlights, beacons. Wheelbase: 2,500 mm, gross vehicle weight: 5,000 kg, unladen weight: 2,700 kg, payload: 2,300 kg. If a new TÜV inspection is desired, we would be happy to provide you with an offer via our partner workshops. Hodevhqhpopfx Andenu Our offer is generally WITHOUT new TÜV inspection, without new DGUV certification, without new safety inspection (SP), without new accident prevention inspection (UVV). You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend a viewing and inspection of the equipment to avoid any misunderstandings regarding the condition and suitability of the item. Inspections and viewings are possible and expressly desired at any time by appointment. All information provided without liability. No responsibility is taken for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and features of the vehicle/equipment. Subject to change, prior sale, and errors.

Condition: used, Year of construction: 2008, lifting height: 16,200 mm, fuel type: diesel, Weights Empty weight: 8.946 kg Functional Hnedpfxsx Uyw Ej Andeu Lifting capacity: 680 kg Working height: 1.820 cm Dimensions of cargo space: 478 x 229 x 315 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS5390 Year of build: 2008 Condition: Used Data: Max. working height: 18,15 m Platform height: 16,15 m Movable up to working height: 18,15 m Lifting capacity: 680 kg Platform dimensions LxW: 4,78 x 1,83 m Platform length pushed out: 7,36 m Transport dimensions LxWxH: 4,78 x 2,29 x 3,15 m indoor use only: no Drive type: Diesel Empty weight: 8.946 kg Special features: All-wheel drive, attachment points for restraint systems (PSA), supports, double extension.

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Hnodpjy S Auuofx Andeu Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: good (used), Year of construction: 2016, lifting height: 5,770 mm, fuel type: electric, Empty weight: 1.520 kg Lifting capacity: 230 kg Working height: 777 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: FR Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Optimum 8 AC Year of build: 2016 Hnjdpoznvf Aefx Andeu Condition: Used Data: Max. working height: 7,77 m Platform height: 5,77 m Lifting capacity: max. 230 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,68 x 0,71 m Platform length pushed out: 2,59 m Total dimensions LxW: 1,89 x 0,76 m Height transport position with railing: 2,00 m Height transport position without railing: 1,14 m Movable up to working height: 7,70 m Ground clearance: 0,06 m Drive type: Battery Empty weight: 1.520 kg Special features: white tires, anchor points for restraint systems (PPE) available. Location: 41468 Neuss immediately available

Condition: used, In - Line Vertical Borer for Solid Rail Components etc Heavy duty steel welded frame 4 no Vertical Heads with Single Drills Hedpfx Aszd Ur Hondenu 2 no Vertical Heads with Triple Drills Motor power 3hp each. Pneumatic control for drilling stroke All heads adjustable along X axis via rack and pinion movement. Scale for positioning. Max. drilling between outside heads 1600mm. All heads with cross slide support & adjustment in / out Adjustable depth stroke to heads 5 no Pneumatic clamps - adjustable in lateral positioning. Two hand push button safety control.

Condition: used, Year of construction: 2008, operating hours: 14,357 h, axle configuration: 4x4, power: 129 kW (175.39 HP), maximum speed: 80 km/h, first registration: 03/2008, color: orange, empty load weight: 7,277 kg, maximum load weight: 4,723 kg, overall weight: 12,000 kg, number of seats: 2, gearing type: other, mileage: 14,358 km, suspension: steel, driver cabin: day cab, wheelbase: 3,000 mm, brakes: other, emission class: none, Equipment: ABS, air conditioning, all wheel drive, cabin, onboard computer, power assisted steering, trailer coupling, * German vehicle * 1st owner * Condition, see photos * Mulag verge mower head RMK1200 * Working width: 1,200 mm * Mounted on Mulag boom MRS300 * Reach: 3.00 meters * Drive via PTO shaft * Mulag rear boom MHS800 * Lateral displacement: 1,600 mm * Reach right & left: 8.70 meters * with Mulag mower head MK1200 * Working width: 1.20 meters * Municipal hydraulics & rear hydraulics * Rear power lift * Height-adjustable trailer hitch * Trailer load: 32,845 kg * Comfort cabin with 2 seats * Air conditioning * Windshield heating Hedpfx Anexiyqfjdjnu * Outside temperature display * Comfort driver's air suspension seat * Electrically heated mirrors * JCB Power Shift transmission with three load-shifting stages * Disc brakes * ABS * Differential lock * Rotating beacon lights * Distance warning lights * Work lights * 4x4 all-wheel drive * Tires: 495/70R24 * Maximum speed: 80 km/h * LOF tractor unit, agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer generally does NOT include a new TÜV inspection, a new DGUV, a new SP, or a new UVV. You can find more trucks on our website at: We speak the following languages: German, English, Polish, Turkish Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that the buyer does not have any false expectations regarding the condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is assumed for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicle. Subject to change, prior sale and errors.

Condition: used, Year of construction: 2013, lifting height: 3,570 mm, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 10.000 kg Hjdpfx Anjv Timbodenu Functional Lifting capacity: 750 kg Working height: 1.940 cm Dimensions of cargo space: 483 x 249 x 273 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: HAB Model: S195-24D4WDS Year of build: 2013 Condition: Used Data: Max. working height: 19,35 m Platform height: 17,35 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Platform dimensions LxW: 4,52 x 2,37 m Platform lenght pushed out: 7,22 m Transport dimensions LxW: 4,83 x 2,49 m Height transport position with/without railing: 3,57 / 2,73 m Movable up to working height: 19,35 m Ground clearance: 0,25 m Only indoor using: no Drive type: Diesel Own weight: 10.000 kg Special features: black tyres, generator 24V - 230 V, all-wheel drive, outriggers, soot filter, attachment points for restraint systems (PSA).

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3320 x 27 x 0,9 mm engine output 1,5 / 1,8 kW weight 670 kg Electro-hydraulic semi-automatic band saw SHARK 332 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Some features: New centralized switch console on an articulated arm. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Turntable (on roller bearings of 420 mm with preloaded thrust bearings assembled). Double belt speed (40/80 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen Hedpfx Aefg E H Ujndenu electronic converter. Base designed to completely contain the coolant, even with maximum angle cuts. The coolant pan (provided with an electric pump for lubrication and Cooling of the saw band) and the chip drawer (can be replaced by a Chip conveyor to be replaced - see special accessories) are in the base frame built-in. Preparation for installing the minimum blade lubrication kit (Optional, in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Adjustable length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, first registration: 01/2022, empty load weight: 2,600 kg, color: black, driver cabin: other, gearing type: other, Year of construction: 2022, Vehicle location: Bovenden, hydraulic transverse locking system Body: 20-ton roll-off system for containers from 4.5m to 6.8m, hook height 1,570mm, Titan version, hydraulic combination container locking system (inside and outside), mechanical hook locking system, protective cover made of plastic over the control unit, pneumatic operation from the driver's cab, fast gear fully functional, oil tank delivered with 2" hoses & connection fittings, 84l standard pump, mounting kit for push-resistant installation with 14 mm screws, device length: 5,700mm! 5. Control unit for auxiliary hydraulics. Additional cost for retrofitting radio: EUR 6,000.00 Hjdpfx Ansi Rmnpodonu Underrun protection available at an additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 2017, Overview This Jakü EGA-CARBO is a water deaeration and carbonation unit built in 2017. It removes dissolved oxygen from the water under vacuum and then carbonates it with CO2, with a capacity range of 120 to 12,000 l/h. The unit was used exclusively for table water production and for deaerated water in filtration, and has run approx. 1,500 operating hours. The unit is mounted on a stainless steel base frame with two vertical stainless steel vessels, pumps and a stainless steel control panel with push buttons, indicator lamps and digital displays. It processes two components, water and CO2. CO2 dosing is set manually; there is no Brix measurement. Technical data - Manufacturer: Jakü - Model: EGA-CARBO - Year of manufacture: 2017 - Machine type: deaeration and carbonation unit for water - Capacity: 120 - 12,000 l/h - Components: water, CO2 - Electrical supply: 400 V, 50 Hz - Installed power: 16 kW - Rated current: 50 A - Operating hours: approx. 1,500 h Equipment Hedsz A Dbropfx Andjnu - Vacuum deaeration of the water - CO2 carbonation with manual CO2 dosing - Two vertical stainless steel vessels - Pumps on a stainless steel base frame with adjustable feet - Stainless steel control panel with push buttons, indicator lamps and digital displays Condition Used, approx. 1,500 operating hours. The unit is already out of service and ready for collection. Availability Available immediately. Location: Germany.

Condition: new, mileage: 45 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 4,895 kg, overall weight: 8,550 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, Fuso 9C18 Duonic GSR City roll-off tipper, available in approximately 2-4 weeks, also available for rent with a purchase option. - Containers in various designs in stock - Gross vehicle weight: 8550kg, unladen weight: 3655kg, payload without container: 4895kg - Weight reduction to a gross vehicle weight of 7.5t possible, payload then approximately 3850kg - Automatic transmission (Duonic) - Differential lock with limited slip - Batteries 2 x 100 Ah Hnedez Ixv Uepfx Andsu - Trailer coupling, ball head 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Rear view camera - Tire pressure and tire temperature monitoring - Turning assistant - Reversing warning - Auxiliary drive with speed increase, factory-installed - Battery cover and AdBlue tank cover - Preparation for battery disconnection relay - Traction tires (all-weather M+S) Continental - Seat covers - Optional installation: rear view camera, rotating beacons, cover, net/strap box, etc. - Various containers constantly in stock or available to order - 3 years / 100,000km factory warranty, Fuso is a brand of Daimler Truck AG Roll-off system mounted on Fuso 9C18 - Roll-off system for containers according to DIN 30722 Part 3 - Lifting and pushing capacity 6000kg - Container length 3500-4000mm - Hook height 900mm - Hydraulic articulated hook arm (shallow lifting angle) - Hydraulic container locking (accommodation of third-party containers possible, safe container transport) - Mechanical hook lock - Cable remote control mounted on the A-pillar, operation possible outside the cab, additionally mechanical emergency operation on the device - Emergency/off function - CE certificate and kit box - Final painting of the hooklift: Black RAL 9005 / Rollers: Black RAL 9005 - Errors and prior sale are excepted! - More information, further XXL pictures on our website: - For inquiries in English, please call ?si=3WuXgXxgPc5ChoBp ... Climate control, automatic climate control, automatic transmission, VAT can be shown separately, ABS, radio, on-board computer, cruise control, heated mirrors, electric windows, central locking with remote control, trailer coupling, power steering, differential lock, tinted glass, tachograph, cab: short cab, air-suspended driver's seat, electric windows, auxiliary drive, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate emission badge: 4 - Green

Condition: good (used), Year of construction: 2013, lifting height: 13,200 mm, fuel type: diesel, Weights Empty weight: 7.083 kg Functional Lifting capacity: 680 kg Working height: 1.520 cm CE mark: yes Condition Technical condition: good Visual appearance: good Hnodpfxoz D Tndj Andeu Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,88x2,28 Production country: UZ Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS4390RT Year of build: 2013 Condition: Used Data: Max. working height: 15,20 m Platform height: 13,20 m Lifting capacity: 680 kg Lifting capacity on extension: 680 kg Platform dimensions LxW: 4,81 x 1,84 m Platform length pushed out: 7,40 m Transport dimensions LxW: 4,88 x 2,28 m Height transport position with/without railing: 2,96 / 2,18 m Movable up to working height: 15,20 m Ground clearance: 0,23 m indoor use only: nein Drive type: Diesel Empty weight: 7.083 kg Special features: All-wheel drive, abrasion-resistant white tires, anchor points for personal protective equipment (PPE), 230V generator, diesel particulate filter, double, extendable deck to max. 7.40 m.

Condition: good (used), Year of construction: 2011, lifting height: 31,630 mm, fuel type: diesel, Empty weight: 31.200 kg Lifting capacity: 1.000 kg Working height: 3.363 cm CE mark: yes Technical condition: good Visual appearance: good Delivery terms: EXW Production country: NL Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Hnedpfoz D Txiox Andou Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform length pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m indoor use only: nein Empty weight: 31.200 kg Special features: White tires, automatic outrigger leveling, 230V connection on platform, hydraulic outriggers, 4-wheel steering, all-wheel drive, anchor points for restraint systems (PPE) provided.

Condition: new, maximum load weight: 30,840 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, total length: 14,040 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new Knapen 3-axle SANH sliding floor trailer with electric roll cover, available from stock! * BPW 9-ton ECO Air HD rigid axle with disc brakes 430, 10-bolt, ET-120 * TireCheck tire pressure monitoring system * Smart Board * A-axis lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF * Gearbox-supported winch with push compensation, pivoting mud flaps * Plastic toolbox 1000x500x500mm * Water tank 28 L with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder * CARGOFLOOR CF-500 SL-C system, electric operation * Ribbed aluminum floor boards, 10 mm, 21 boards * Wear plates on the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear, under the floor * Platform on the front wall with ladder and safety switch to interrupt the power supply to the electric roll cover * Moving bulkhead * Rear doors with external locking bars * One locking bar per rear door * "A" sign (vertical hinge line) on the left rear door * Electric roll cover POWERSHEET, with remote control * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) Hnjdpfx Asz Iuw Ujndeu * Side wall protection tarpaulin mounted in the welt on the left side wall, including fixed roll-fix operation at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Superstructure RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) Hnsdpfx Aoz Inavsndou F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm Hnedpfx Asz Indusndsu -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Hjdpfx Anjz Ipcljdonu Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height Hodpfx Ajz Ipdvendonu F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25NEOS05, Mobile stretch winder NEOS TECHNICAL DETAILS: HMI touch panel 7" two maintenance-free AGM batteries 12 V - 120 Ah connected in series Standard charger: 230 V - 1L+N+PE - 50 HZ Autonomy 200 - 300 pallets per load High frequency battery charger with LED indicator Winding height machine (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop function of the machine according to CE standards Ø 22 mm ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: F01 - 01 - cross winding (up/down) F01 - 02 - Single wrap (up only or down only) F01 - 03 - Complete wrap cycle with foot wraps at the same starting height F01 - 04 - Fast cycle (with limited or no foil overlap) F01 - 05 - layer cycle F01 - 06 - Economical winding program Soft start cycle for applying edge protection Winding cycle with reinforcement and adjustable number of windings Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: 99 storable winding programs All function parameters can be set via the display F00 - Screen lock program change Adjustable machine speed around the pallet up to 90 m/min Lifting carriage speed can be adjusted up and down independently of each other Lift carriage speed from 1.3 up to 5.4 m/min Lifting carriage speed down from 1.3 to 5.4 m/min Number of wraps on the pallet foot (1 - 10 wraps) Number of wraps on the pallet head (1 - 10 wraps) Adjustment pallet wrapping height Foil application tension foot & head winding / ascent & descent independently adjustable Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable Ergonomic height for foil change Display foil consumption (option for PRS - PS) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE: Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% - PATENTED "ARYA" SYSTEM FOR PRS / PS - ARYA system for automatic foil blowing and cutting, incl. infrared remote control -Manual cord formation on the foil carriage to strengthen the winding -Automatic cutting unit (FE, PRS & PS) - Machine version for temperatures down to -5° C (only version without HMI touch panel) Other systems available immediately from the Ludwigsburg warehouse Illustration similar. Hnedoz Ipk Nspfx Andsu

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23SynthesiLow04, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height 25mm Short ramp 500mm long TECHNICAL DETAILS: Turntable LOW PROFILE · Height 25mm · Max. pallet dimensions: 1000 x 1200 mm · Max. load capacity: 1200 kg · a ramp included Hjdpfx Aoz Ipnhondjnu Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ Total power: 1.2KW / 8A Optional: pinion for OPRS pre-stretching ratio of 150% / 250% / 300% possible Other systems available from the Ludwigsburg warehouse.