Used Quaser Mv 154 Pl for sale (40)

Condition: good (used), Year of construction: 2006, operating hours: 22,715 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, spindle speed (min.): 12,000 rpm, operating hours of spindle: 5,570 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Quaser. The machine is in very good condition and can be inspected under power in our facility. Spindle hours: 5,570 h Free loaded on truck Bsdpoyak D Ssfx Aa Njld Manufacturer: Quaser Model: MV154PL/12 Control: Heidenhain iTNC 530 Year of manufacture: 2006 Technical data: Travel X-Y-Z: 1020x500x560 mm Rapid traverse: 40 m/min Table clamping surface: 1200x550 mm Spindle taper: BT 40 Big Plus Tool magazine: 30 positions Spindle speed: max. 12,000 rpm, stepless Spindle motor: 18.5 kW Transport dimensions: 2600x2450x2600 mm Weight: approx. 6.5 t Internal coolant supply (CTS)

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Control Heidenhain iTNC 530, Year of manufacture 2008, Travel X/Y/Z 1000/530/560 mm, Tool changer with 30 positions, Bjdoydvx Aspfx Aa Njld Noc Tqfqzew Uf Nfe Rowb Tool holder SK 40, Air blast through the spindle, ICS 20 bar, External cooling, Scraper belt chip conveyor, 3D probe, Tsc Aldaswlffpsbsb infrared receiver, Temperature-controlled oil cooling system, Thermal compensation, Spindle replacement 2021,

Condition: used, Year of construction: 2008, x-travel 1020 mm y-travel 500 mm z-travel 500 mm table surface area 1200 x 500 mm spindle taper SK 40 spindle turning speed - stepless 40 - 12.000 U/min spindle drive 18,5 kW feeds 0 - 20.000 mm/min rapid traverse 40 m/min ATC 30 Pos control HEIDENHAIN, iTNC 530 total power requirement 30 kW weight of the machine ca. 6,85 t - with coolant through spindle Bodsuntnbjpfx Aa Njld Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Spindle oil chiller Through spindle coolant Blsdsx Hypxspfx Aa Nod Floor space W x D (mm) 2,235 x 2,420

Condition: excellent (used), Year of construction: 2015, Incl. chip conveyor Incl. inclined bed filter system Incl. zero-point clamping system Incl. 4th axis Rotamatik 120 Renewed: Spindle Motor with new bearings X-axis new ball screw New Däublin Offer on request Blsdoibat Ispfx Aa Njd

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Bsdpfjxlf D Nsx Aa Neld Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: good (used), Year of construction: 2008, functionality: fully functional, operating hours: 10,180 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: FANUC, rapid traverse Z-axis: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, TECHNICAL DETAILS Electrical specifications: Operating voltage: 400 V Frequency: 50 Hz Connection: 20 kVA Control system: Control: FANUC mill i Spindle: Max. Spindle speed: 12,000 rpm Bedpfx Aaou N If Ee Nold Traverse paths: X-axis travel: 1,020 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Rapid traverse: 40 m/min Table: Table dimensions: 1,200 x 500 mm Max. Load capacity: 500 kg Tool holder and tool change: Tool holder: BT40 Tool changer: 30-fold Machine data: Year of construction: 2008 Machine weight: 6,850 kg Dimensions (L/W/H): 2,470 x 2,540 x 2,750 mm Tool parameters: Normal tool - Max. Tool diameter: 88 mm Standard tool - Max. tool length: 280 mm Tool length: 280 mm Standard tool - Max. Tool weight: 7 kg Large tool - Max. Tool diameter: 125 mm Large tool - Max. Tool length: 280 mm Large tool - Max. Tool weight: 7 kg Tool change time: Tool change time (chip to chip): 5 s Cooling and handling systems: IKZ: Yes (8 bar) Electric handwheel: Yes Chip conveyor: Yes Operating hours: Switch-on hours: 42,230 h Spindle hours: 10,180 h The machines were only operated in a single shift and only approx. 50% of the time.

Condition: repair required (used), DEFECTIVE! Vertical machining center, brand Quaser, model MV154PL, DEFECTIVE! Maximum spindle speed: 12,000 rpm. Bsdpfx Aaeyi Dtfj Nold

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", Blsdjndz Aqepfx Aa Njd *

Condition: good (used), Year of construction: 2011, Traverses XYZ: 700 x 530 x 560mm, Blsdjxv S Ngopfx Aa Nod table size 900 x 500mm, Heidenhain TNC620 Control, BT40 spindle taper, 24 station tool changer, Spindle speed 9,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Low volt light, 4th Axis Rotary Table

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Controller: Fanuc 18 iMB (X)-axis: 1,524 mm (Y)-axis: 700 mm (Z)-axis: 610 mm 4 axes Kitagava table with quill Spindle taper: 40 BBT Spindle motor: 30 kW AC Spindle speed: 12,000 rpm Bledpfxsx Tqgne Aa Nsd Through-spindle cooling: 20 bar Tools: 48 Table size: 1,700 x 700 mm Machine weight: 9,800 kg Machine dimensions: 2,950 x 4,480 x 3,030 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 48, controller manufacturer: Heidenhain iTNC530, overall weight: 9,000 kg, table length: 1,700 mm, table width: 700 mm, controller model: iTNC530, torque: 236 Nm, spindle motor power: 37 W, nominal power (apparent): 37 kVA, number of spindles: 1, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, table load: 700 kg, operating hours of spindle: 16,580 h, Equipment: chip conveyor, documentation/manual, Heidenhain iTNC530 3-axis CNC machining center Bsdpfxevz Tyus Aa Nold Stroke x 1500 mm Stroke Y 700 mm Stroke Z 610 mm Table dimensions: 1700x700mm SK40 tool holder Magazine 48 tools Rapid feed 36m/min Table load: 700 kg Spindle center coolant 20 bar Chip conveyor Crank

Condition: ready for operation (used), Year of construction: 2018, Immediately available from university: As-new Quaser CNC machining center Model MV 134 C Year of manufacture: 2018 Operating hours: 200 Fanuc Oi – MF control Bjdpoypaa Ujfx Aa Nold Table: 940 x 550 mm Travel X/Y/Z: 660/570/560 mm SK 40 Spindle speed: 80 – 12,000 rpm Through-spindle coolant (IKZ) Tool changer: 30 positions Spindle power: 20 kW Table load capacity: 500 kg Chip conveyor Weight: 6 tonnes Price: EUR 27,500 plus VAT, ex site

Condition: excellent (used), Year of construction: 1998, Quaser MV 204 incl. 4th axis dividing head Year of manufacture: 1998 Chip conveyor Info: Spindle and rotary union were replaced in 2022 and have only 400 operating hours. Control system: - Fanuc 18MC - Electronic handwheel Travel paths: - X: 1000 mm, Y: 600 mm, Z: 600 mm Main spindle: - SK 40 Blsdpoykacrsfx Aa Nod - Maximum spindle speed: 10,000 RPM - Spindle cooling Tool changer: - 20 magazine positions Availability: - Immediately Special features: - Machine is ready for immediate use. - Machine is available for prompt delivery. - Machine can be inspected and tested under power at the location. - Machine will be loaded onto truck free of charge. - Forklift for loading is available. - Transport can be organized upon request.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Bodsymmh Tspfx Aa Njld Cycle hours 7100 Timer

Condition: good (used), Year of construction: 2018, Machine from educational institute with 200 spindle hours Quaser MV 134 C Year of manufacture: 2018, Control: Fanuc Oi - MF, Travel X/Y/Z: 650/570/560 mm, Spindle speed up to 12,000 rpm, Taper: SK 40, Tool changer with 30 positions, Table size: 940 x 500 mm, Max. table load: 500 kg, High-pressure coolant through spindle (IKZ) / unused Chip conveyor, Rapid traverse 36 m/min, Bedpfx Aajyh U U Ij Neld

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Bledpoyfm T Hjfx Aa Nod

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Blodpfx Aajx Awzbe Ned X1020mm Y610mm Z610mm 12.000 rpm,25 KW, 160Nm Control unit: HEIDENHAIN iTNC 530, 4th axis will come without parts shown by hand.

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2650 mm Measurements depth 2220 mm Measurements height 2855 mm Machine weight 8200 kg Main Drive Spindle speed range 10000 rpm Spindle motor power 15 / 33 kW Tool taper BT-40 Bodpfjx D Scpjx Aa Nold Movement X-Axis Movement 700 Y-Axis Movement 590 Z-Axis Movement 480 This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW. The machine includes a 32-position ATC, chip conveyor, and internal coolant at 20 bar. Consider the opportunity to buy this Quaser MV 204 IIU/10 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm Blsdpfxex Enkue Aa Nod This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: like new (used), Year of construction: 2018, operating hours: 2,350 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The used QUASER MV 184 C 4-axis vertical machining center is a medium-sized CNC vertical machining center featuring a cast iron structure and roller guideways for the table. Axis travels: X 1020 mm, Y 610 mm, Z 610 mm; table dimensions: 1200×600 mm, with a maximum load capacity of 500 kg. The machine is equipped with a continuous 4th axis TJR HR 255N with corresponding tailstock, as well as a precision-milled table with T-slots. Spindle: ISO-40 (DIN 69871) with 10,000 rpm (max power: 18 kW), spindle cooling via dedicated chiller, high-pressure through-spindle coolant, 30-position RANDOM-type tool changer with swing arm, RENISHAW TS 27 tool presetting device, wireless RENISHAW part probe, and belt-type chip conveyor. Bjdpfxoxf Nbrj Aa Njld Year of manufacture: June 2017 (installed in 2018), equipped with FANUC MILL I CNC with color LCD, Manual Guide i software, remote handwheel, USB port, RS-232 serial interface, memory card slot, and FILTERMIST mist extraction unit. The machine is in PERFECT condition with only 2,350 cutting hours, and various tooling options are available as accessories.

Condition: good (used), Year of construction: 2002, functionality: fully functional, 3-axis machining center, CNC FANUC 18MC Complete with: - High-pressure through-spindle coolant - Belt chip conveyor - Spindle chiller - Manuals - CE certificate TRAVEL X axis (longitudinal table movement): 1020 mm Y axis (transversal table movement): 600 mm Z axis (vertical head movement): 560 mm TABLE Table-to-spindle distance: 150 / 710 mm Dimensions: 635 × 1200 mm Maximum table load: 1000 kg SPINDLE Table with T-slots: 6 x 18 mm h8 T Maximum speed: 10,000 rpm Gear ranges: 1 Maximum torque: 192 Nm Taper: No. 40 Internal bearing diameter: 70 mm FEED Rapid traverse: 32,000 mm/min Working feed: 1–20,000 mm/min Jog feed: 4,000 mm/min Thrust (x & y / z): 7,400 / 13,500 N ATC (Automatic Tool Changer) Tool holder taper type: ISO 40 [BT-40] Number of tools: 24 [32] Maximum tool diameter: 88 / 125 mm Maximum tool length: 300 mm Maximum tool weight: 7 kg Selection method: random Tool change time: 2.5 sec Chip-to-chip time: 6 sec MOTORS Spindle drive: 15 / 11 kW Servo motors (x & y / z): 2.1 / 3.8 kW Coolant pump: 0.5 kW (nozzles) Washing pump: +1.4 kW Bodpoxfguvefx Aa Nold POWER SUPPLY Capacity: 30 kVA TANKS Lubricant: 4 liters Coolant: 400 liters DIMENSIONS Height: 2,825 mm Floor space: 2,650 × 2,200 mm Weight: 7,500 kg PLEASE NOTE: Machine only; vices and tools are not included in the sale.

Condition: like new (used), Year of construction: 2023, operating hours: 6 h, functionality: fully functional, machine/vehicle number: 146G230069, travel distance X-axis: 661 mm, travel distance Y-axis: 572 mm, travel distance Z-axis: 560 mm, controller manufacturer: Fanuc, controller model: Oi - MF Plus, workpiece weight (max.): 500 kg, total height: 3,000 mm, total length: 3,140 mm, total width: 2,050 mm, table width: 550 mm, table length: 940 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6 h, spindle nose: 40 tapper, tool length: 300 mm, tool diameter: 150 mm, Quaser MV134 Fanuc Oi - MF Plus CNC controller The machine its new, only 6 Hours Bodsxm Txqspfx Aa Nsld

Condition: ready for operation (used), Year of construction: 2019, This 3s Quaser MV184 vertical machining centre was manufactured in 2019. It features a table size of 1,200 × 600 mm and a maximum table load of 500 kg. The spindle speed ranges from 50 to 12,000 rpm, powered by a 32 kW motor. If you are looking to get high-quality machining capabilities, consider the Quaser MV184 machine we have for sale. Contact us for further details. Blsdpfxoyh Nhce Aa Nsd

Condition: good (used), Year of construction: 2014, Traverses XYZ: 1020 x 610 x 610mm, table size 1200 x 600mm, Heidenhain TNC620 Control, BT40 spindle taper, Bledpfsxv S Ezex Aa Njd 30 station tool changer, Spindle speed 12,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Low volt light, Nikken 4th Axis Rotary Table