Used Quill Stroke for sale (7,754)

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 28727, DOUBLE-STROKE HEADER NATIONAL 61MS operational Machinery operational, fully functional. Revised in 2024 (mechanical and electrical parts) Available for any test c/o HBR srl Number of die: 1 Number of punches: 2 Pieces per min.: 400 Cutoff diameter: 6 mm. Cutoff length (min./max.): 10/52 mm. Kickout stroke-die (min./max.): 4.8/30 mm. Kickout stroke-punch (max.): 9.5 mm. Upset diameter: 14 mm. Quill diameter: 19 mm. Cutter insert diameter: 12 mm. Die diameter: 41 mm. Cone punch diameter: 32 mm. Finish punch diameter: 35 mm. Power of main motor: 15 KW Floor space (width): 1.340 mm. Gkedpot Rp A Hsfx Akhjd Floor space (length): 2.680 mm. Height: 1970 mm. Net weight: 4.700 kg. Gross weight: 5.400 kg.

Condition: good (used), Year of construction: 1979, functionality: fully functional, spindle mount: MK 3, For sale is a pillar drilling machine from the brand Alzmetall in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Alzmetall • Model: AB3-ES • Speed: approx. 65 - 1,750 rpm • Quill stroke: approx. 180 mm • Table size: approx. 515 x 415 mm • Year of manufacture: 1979 • With coolant pump • Condition: Used, functional The machine can be inspected and tested at any time! Shipping costs via freight forwarder: approx. €190 Gsdj Ahrhiepfx Akhskd International buyers are welcome! You will receive an invoice with VAT shown. Inspection/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free on board. Errors in technical data and prior sale reserved.

Condition: ready for operation (used), Year of construction: 2018, L&Z Lathe / DMTG - Dalian CW6163E / 5 - Meter Turning Length -Year of manufacture: 2018 -CE marking -Turning diameter over bed: 630mm -Turning diameter over cross slide: 350mm -CENTER DISTANCE: 5000 mm -Spindle bore: 100mm -Bed width: 550mm -Spindle nose: C11 -Spindle speeds: 7.5 - 1000 RPM -Number of speed steps: 18 -Automatic longitudinal / crossfeed -Rapid traverse in bed slide / longitudinal & crossfeed -Thread cutting / Metric / Inch / Module etc. Gedpfx Aj Ah E I Hskhjkd -Main drive: 11 KW -Tailstock quill diameter: 100mm -Tailstock quill stroke: 250mm -Coolant system -3-jaw chuck: 300mm -2 x Steady rests -Chuck guard Dimensions: L x W x H: 7.4 x 1.4 x 1.6 meters / Weight: 6700 KG Errors and omissions excepted.

Condition: good (used), Year of construction: 2010, functionality: fully functional, Technical details turning diameter 475 mm turning length 830 mm control HEIDENHAIN MANUALplus 620 swing diameter over slide rest 260 mm centre distance 1000 mm spindle bore 70 mm spindle turning speed range 1 - 3000 U/min feeds - cross 0,001 - 1000 mm/U feeds - longitudinal 0,001 - 2000 mm/U rapid travel - longitudinal/face 10 / 5 m/min tailstock quill diameter 70 mm tailstock quill stroke 120 mm tailstock quill taper MT 5 main drive (40 % ED) 25 kW weight of the machine ca. 2,9 t Additional information * Control HEIDENHAIN MANUALplus 620 * DXF conversion software (processing of contours in DXF format from CAD drawings) * Ethernet and USB interfaces inside the control cabinet * Coolant system (frequency-controlled), 1–4 bar * Glass scale for direct position measurement on the X and Z axes * 4-position PARAT quick-change tool holder, size 2, with several inserts Gkodpfx Aj Akc E Ajkhed * 3-jaw-chuck RÖHM ZS 200 * Roller guide for easier movement of the tailstock * 2 movable safety doors * Main motor fan control, temperature-controlled, for particularly quiet environments such as laboratory workshops and schools

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,755 h, functionality: fully functional, machine/vehicle number: MT-3000/1500: MT301EB0051, turning length: 1,540 mm, turning diameter: 560 mm, spindle speed (min.): 30 rpm, spindle speed (max.): 3,000 rpm, spindle bore: 90 mm, travel distance X-axis: 635 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,595 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, feed rate X-axis: 30 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, total height: 3,295 mm, total length: 6,404 mm, chuck outer diameter: 400 mm, total width: 3,070 mm, quill travel distance: 150 mm, spindle nose: JIS A2-8, overall weight: 18,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, Machine type: Turning and milling center Manufacturer: MORI-SEIKI MT-3000/1500 Condition: good, can be inspected while powered on Operating hours: 15755h Control system: CNC Mori-Seiki MSX-501 (MAPS2) Max. turning diameter: 560mm Turning length: 1540mm Swivel diameter: Max. 815mm Spindle-tailstock distance: 1725mm Axis travels: X-axis: 635mm / Y-axis: ±110mm (220mm) / Z-axis: 1595mm / Rapid traverse: (X/Y/Z) 24/24/30m/min Feed rate: Max. 30000mm/min Total power: 70kW Weight: 18200kg Dimensions (LWH): 6404x3070x3295mm Main spindle: Chuck: Forkardt power chuck FNC-400/3 Speed range: 30-3000/min Main spindle power: 30kW / 25kW Spindle nose: JIS A2-8 Spindle bore: 90 mm Spindle bearing diameter: 160mm C-axis division: 0.001° Milling spindle: Spindle speed: 8000/min Power: 7.5kW / 5.5kW Tool taper: Capto6 (C6) Spindle bearing diameter: 80mm B-axis: -120° to +105° B-axis resolution: 0.001° Number of tools: 120 Max. tool diameter: 90/125mm Max. tool length: 400mm Max. tool weight: 8kg Tool change time: 1.6 sec. Tailstock: Morse taper: MK5 Quill stroke: 150mm Additional information: Chip conveyor: Tsubakimoto, hinged belt Cooling system: Standard (635W /1040W) Coolant supply: External and through the tool spindle Tool presetter: Integrated in the machine Bar loader: Interface only Foot switch for chuck: Double foot switch Automatic shutdown: Available Gsdpfxo Ai N D Ao Akhjkd NC screen language: German PC screen language: German Warning screen language: German Optional sentence masking: Softkey version Programmable data input: Available Number of shared variables for user macros: 600 Load monitoring: Available Included with the machine: Various chuck jaws Approx. 30 cutting tools Capto6 Live centers MK5 Manuals and documents Various spare parts

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed - Thread-cutting device Gsdpfx Ae Aiirxokhekd - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: good (used), Year of construction: 2024, bore capacity in steel (diameter) 55.0 mm throat 400 mm bore stroke 200 mm threading M 42 in ST Godpfx Akj Aiir Aohekd turning speeds 45.0 - 2000 U/min table: 600 x 600 mm bore spindles - Morse Taper 4 MK column diameter 200 mm feed 0.1 / 0.15 / 0.2 mm/U distance spindle /table 130 - 725 mm T-slots 3x 18 x 160 mm table swivelabel .0 Grad table load 350 kg engine output 2.2 / 2.8 kW weight 7 kg Machine height 1060 x 850 x 2545 mm Current list price: approx. 11.000 euros Special price upon request In good condition (!!) Features: - OPTIMUM OPTIdrill DH 55 G gear-driven drill press - Heavy-duty model with automatic quill feed -INDUSTRIAL- - Heavy-duty, solid cast-iron bench drill press - Electrically operated quill feed - Thread-cutting device - Drilling depth stop - Automatic gear lubrication via oil pump - Large, solid drill table * heavily ribbed on the back, /- can be tilted degrees to the side - solid base plate with two parallel T-slots - coolant system - 24-volt DC electronics - operating instructions

Condition: ready for operation (used), Year of construction: 2023, operating hours: 23 h, travel distance X-axis: 410 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 410 MC universal machining centre was manufactured in 2023. It features an electronically controlled infinitely variable main drive with a spindle speed of up to 5,000 rpm and a robust spindle power of 13.0 kW. The machine is equipped with hardened and ground flat guideways and automatic mechanical tool clamping. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 410 MC machine we have for sale. Contact us for further details. - Demonstation Machine -Machine ON Time: 910 h - Spindle Power S1-100% ED: 6.8 kW - Spindle Power S6-25% ED: 13.0 kW - Spindle Speed (Manual Operation): Infinitely variable 1 - max. 4,500 rpm - Spindle Speed (Automatic Operation): Infinitely variable 1 - max. 5,000 rpm - Feed Drives: Electronically controlled infinitely variable servo drive per axis - Rapid Traverse / Feed Rate X-, Y-, Z-axis: Infinitely variable up to max. 5 / 5 / 5 m/min - Operating Voltage: 400 V - Mains Frequency: 50 Hz - Number of Phases: 3- Rated Current: 24 A - Main Fuse: 32 A - Short-Circuit Breaking Capacity: 10 kA - Power Consumption / Connection Power: approx. 17 kVA - Control Voltage: 24 V - Installation Weight (Base Machine): approx. 1,800 kg (incl. fluids, without options/tools) - Max. Transport Weight: 2,030 kg - Machine Construction: FEM-optimized cast construction in cross-slide design - Guideways: Hardened and ground flat guideways in X, Y, Z with metal covers - Drive System: Ball screws in all axes - Spindle Taper Interface: SK 40 DIN ISO 7388-1 Form AD with pull stud DIN ISO 7388-3 Form AD (SKU: 10-113300) - Vertical Milling Head: Swivel range +/- 90°, manually extendable quill with turnstile, 70 mm stroke, clampable, speed-dependent air cooling, milling cutter guard- Tool Clamping: Automatic mechanical tool clamping, clamping force 10,000 N, hydraulic release - Measuring System: Distance-coded linear measuring systems, direct, incremental, resolution 0.001 mm - Overload Protection: Overload detection via drive and control technology - Safety Handwheels: In all 3 axes - Safety Enclosure: Splash and chip guard cabin mounted on chip tray, moving vertically with axis, limit switch secured, 2 sliding doors front, 1 hinged door right, viewing windows all sides - Control Panel: Mounted on long, swiveling arm at base, rotatable - Lubrication: Automatic central lubrication with initial lubricant filling and front-mounted separate waste oil container - Coolant System: Free-standing reservoir, 66 L capacity (SKU: 10-450111-03) - Machine Lamp: LED flexible arm light - Leveling Elements: 1 set = 4 pieces - Fixed Angular Table: Clamping surface 650 x 375 mm, 5 T-slots 14 H7 (pitch 63 mm), max. load capacity 250 kg (SKU: 10-470050-02) - Control Unit: HEIDENHAIN TNC 620 FS with Functional Safety - Screen: 19" vertical touchscreen - Storage Capacity: 30 GB total, 7.7 GB program memory (Compact Flash CFR)- Block Processing Time: 1. Gkjdpfs Af Rqbsx Akhod

Condition: used, Technical Details Maximum turning diameter: 345 mm Turning length: 3,000 mm Control system: Sinumerik 805 Siemens Swinging diameter over bed: 570 mm Maximum swinging diameter over cross slide: 365 mm Main spindle: Speed range - main spindle: 3 - 2,500 min⁻¹ Number of speeds: 2 Drive power - main spindle: 15 / 21 kW Maximum torque: 2,000 Nm Spindle diameter in front bearing: (100) mm Spindle bore: (62) mm Spindle head: DIN 55027 No. 8 Travel distances: Cross slide travel: 345 mm Top slide travel: 125 mm Tailstock: Quill diameter: 80 mm Tailstock arbor: MK 5 Quill stroke: 190 mm Feeds: Maximum longitudinal feed: 10 m/min Gksdpfxo Akd Iys Akhed Maximum cross feed: 5 m/min Threading device: Thread pitch: 0.1 - 400 mm Total power requirement: 40 kVA Machine weight: approx. 5.6 t Space requirement: approx. 6.0 x 2.5 x 2.0 m Accessories Documentation Coolant system Tailstock Various tool holders Steady rest 30 - 365mm Steady rest 25 - 160mm

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine - Vertical Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Technical Data: - X-travel: 300 mm Gedpozq Hlfefx Akhokd - Y-travel: 300 mm - Z-travel: 400 mm - Speed range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, from a vocational training workshop, CE compliant, in excellent condition!!! Technical data: >> Year of manufacture: 2013, Machine no. D4D 130601 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed stages from 40-3000 RPM, infinitely variable >> Quill stroke: 120 mm >> Tailstock: MK3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint / Dimensions approx.: Length 1,600 x Depth 0.9 x Height 1.3 meters >> Weight approx.: 750 kg Accessories and equipment: >> 3-axis position indicator >> 1 three-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 four-jaw chuck with 200 mm diameter and 1 set of jaws from Röhm >> 1 quick-change tool holder without collets >> Steel tool rest with 2 pockets >> Chip guard >> Coolant system >> Bed stop Gsdpfx As Afxm Ujkhekd About the machine: Offered for sale is an Emcomat 17D, lead screw and pull spindle lathe, manufactured in 2013, in well-maintained condition. The machine is fully functional, of course. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to inspect this machine on-site while it is powered on and to convince yourself of its condition.

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter max 300 mm Gkedoudc Uzopfx Akhed turning length max. 2000 mm control Siemens Serie 810D turning spindle Durchlass 90 mm 300 mm Feed speed 6/6 m/min. number of tools 8 quill stroke 300 mm diameter of quill 105 mm taper MK 6 coolant tank 100 l total power requirement 15 kW weight of the machine ca. 4650 KG

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min Gkjds Akchmepfx Akhjd feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: not inspected (used), Year of construction: 1992, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 3 m/min, feed rate Y-axis: 3 m/min, feed rate Z-axis: 3 m/min, table width: 700 mm, table length: 1,250 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, Vertical Machining Center Manufacturer: MAHO Model: MH 1000 E Year of manufacture: 1992 Technical details: X-travel: 1000 mm Y-travel: 500 mm Gksdpfxszz S Rho Akhjd Z-travel: 700 mm Table clamping surface: 1250 x 700 mm Spindle speed: 20 – 3,200 rpm Main drive motor: 22 kW Quill stroke: 100 mm Distance spindle head to table (min./max.): 138/600 mm Feed rate (X / Y / Z): 3,000 mm/min Rapid traverse (X / Y / Z): 60/50/60 m/min Total power requirement: 27 kW Used; sold without warranty Machine transport dimensions (LxWxH) approx.: 3900x2560x2550 mm Transport dimensions pallet/sheets (LxWxH) approx.: 1500x12000x600 mm Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, bar passage: 117 mm, overall weight: 8,500 kg, The Hyundai WIA L400MC is in like-new condition. Inspection under power is possible at any time. Model: Hyundai WIA L400MC Design: Standard Bore Swinging diameter over bed: Ø 780 mm Swinging diameter over slide: Ø 535 mm Max. turning diameter: Ø 560 mm Max. turning length: 1,180 mm Bar capacity: Ø 117 mm Chuck size: Ø 381 mm (15") Max. spindle speed: 2,000 rpm Spindle motor power (max./continuous): 37 / 30 kW Spindle torque (max./continuous): 3,073 / 2,490 Nm Spindle drive: Belt drive with 2-speed gearbox Spindle taper: A2-11 C-axis: 0.001° Travel distances X-axis: 320 mm Z-axis: 1,200 mm Rapid traverse X/Z: 20 / 25 m/min Guideways X/Z: Box guide / Flat guideways Number of tool stations: 12 Tool holder, outer diameter (OD): □ 32 mm Tool holder, inner diameter (ID): Ø 63 mm Turret indexing time: 0.2 s Mount: BMT75P Driven tools Motor power (max./continuous): 7.5 / 5.5 kW Max. speed: 4,000 rpm Torque (max./continuous): 44.7 / 35 Nm Collet size: Ø 26 mm (ER40) Gkodoz Ibaiepfx Akhed Tailstock Tailstock taper: MK5 (integrated) Quill diameter: Ø 150 mm Quill stroke: 132 mm Tailstock travel: 1,100 mm Additional technical data Coolant tank: 300 liters Lubricant tank: 2 liters Electrical connection: 46 kVA Recommended cable cross-section: > 50 mm² Voltage / Frequency: 220 V / 60 Hz or 200 V / 50 Hz Footprint (L x W): 4,202 x 2,207 mm Machine height: 2,153 mm Machine weight: approx. 8,500 kg Control: HYUNDAI WIA FANUC i Series / FANUC 32i-B

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system Godpozldquofx Akhokd - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: excellent (used), functionality: fully functional, turning length: 1,000 mm, turning diameter: 350 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,020 mm, CNC turning lathe Manufacturer: Okuma Type: LB15 II-M-1SC 1000 Year of manufacture: 1996 Control system: OSP-7000L Country of origin: Japan Delivery time: ex stock Machine equipment - Long turning length - Tailstock - Chip conveyor - Powered tools - One touch - IGF - Touch setter Technical details - Working ranges - Swing diameter: 340 mm - Max. turning diameter: 350 mm (chuck work) - Max. turning length: 1000 mm Travel distances - X-axis: 260 mm - Z-axis: 1020 mm Spindle - Speed: 45~4500 rpm - Spindle bore diameter (normal): 62 mm - Spindle bore diameter (front bearing): 100 mm - Chuck bore: 52 mm Turret - Number of stations: 12 - Tool holder: VDI40 - Indexing time station/station: 0.1 sec Feed rate - Rapid traverse X/Z: 15,000/20,000 mm/min Tailstock - Quill diameter: 90 mm - Quill stroke: 120 mm Main drive - Spindle motor: 15/11 kW Machine dimensions: approx. 3315 x 1895 mm Machine height: approx. 1905 mm Weight: approx. 5700 kg Godpfx Aszmgcvekhskd Optional - Transport organization and execution - Machine delivery and installation - Machine commissioning

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Gsdewid Spjpfx Akhjkd Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 42,887 h, functionality: fully functional, machine/vehicle number: MT-253/1000: 36 / MT253AFK0469, turning length: 1,040 mm, turning diameter: 560 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, travel distance X-axis: 635 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,095 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, feed rate X-axis: 30 m/min, feed rate Y-axis: 24 m/min, feed rate Z-axis: 24 m/min, total height: 3,239 mm, total length: 5,490 mm, chuck outer diameter: 400 mm, total width: 2,978 mm, spindle nose: JIS A2-8, overall weight: 17,000 kg, Equipment: documentation/manual, rotational speed infinitely variable, Machine type: Turning and milling center Manufacturer: MORI-SEIKI MT-253/1000 Condition: good, can be inspected while powered on Control: CNC Mori-Seiki MSG-501 (MAPS1) Operating hours: 42887h Max. turning diameter: 560mm Turning length: 1040mm Swiveling diameter: Max. 705mm Spindle-tailstock distance: 1328mm Axis travels: X-axis: 635mm / Y-axis: ±110 mm (220mm) / Z-axis: 1095mm / Rapid traverse: (X/Y/Z) 24/24/30m/min Feed rate: Max. 30,000mm/min Total power: 58kW Weight: 17000kg Dimensions (LWH): 5490x2978x3239mm Main spindle: Turning chuck: Röhm Duro-NC400/3 Speed range: 35-3500/min Main spindle power: 18.5kW / 15kW Spindle nose: JIS A2-8 Spindle bore: 86 mm Spindle bearing diameter: 130mm C-axis division: 0.001° Milling spindle: Spindle speed: 8000/min Power: 7.5kW / 5.5kW Tool taper: Capto6 (C6) Spindle bearing diameter: 80mm B-axis: -120° to +105° B-axis resolution: 0.001° Number of tools: 42 Max. tool diameter: 80/125mm Max. tool length: 400mm Max. tool weight: 8kg Tool change time: 1.6 sec. Tailstock: Morse taper: MK5 Quill stroke: 150mm Additional information: Chip conveyor: Tsubakimoto, hinge belt Cooling system: Standard (635W / 1040W) Coolant supply: External and through the tool spindle Tool pre-setter: In the machine Bar feeder: Interface only Measuring system: Heidenhain Foot switch for chuck: Double foot switch Foot switch for tailstock quill: Double foot switch Automatic shutdown: Present NC screen language: German PC screen language: German Warning screen language: German Optional sentence masking: Softkey version Programmable data input: Present Number of common variables for user macros: 600 Load monitoring: Present Gjdpfx Aj Ai D A Iekhjkd Included with the machine: Various chuck jaws Approx. 30 cutting tools Capto6 Follower points MK5 Manuals and documents Various spare parts

Condition: excellent (used), Gildemeister NEF 720 Year of manufacture: 2001 Control system: - Heidenhain Manual Plus 4110 Working area: - Swing diameter over bed: 710 mm - Swing diameter over cross slide: 415 mm - Distance between centers: 1995 mm Spindle: - Spindle bore diameter: 92 mm - Speed range: 10 to 1800 rpm - Number of gear stages: 2 - Stepless Tool holder: - Multifix, size C (D1) Godpo Akfguefx Akhjkd Tailstock: - Quill diameter: 110 mm - Quill stroke: 210 mm - Quill arbor: MK 6 Accessories: - Lynette - Various Multifix steel holders Availability: - Immediately available

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC7, spindle speed (max.): 5,000 rpm, number of axes: 3, This 3-axis KUNZMANN WF 610 CNC was manufactured in 2024. It features a longitudinal travel of 610 mm, transverse travel of 400 mm, and vertical travel of 450 mm. The machine is equipped with a 20-station tool changer and a maximum table load of 300 kg. If you are looking to get high-quality milling capabilities, consider the KUNZMANN WF 610 CNC vertical machining centre we have for sale. Contact us for further details. - Demonstration machine- Spindle Hours: 332 h- Program Run Hours: 310 h- Feed Rate (Rapid Traverse): X/Y/Z up to max. 30/30/15 m/min - Main Drive (Option Installed): SK 40 Motor Spindle, 1 - 12,000 rpm (Swiss made) - Spindle Power: 8.5 kW (S1-100% ED) / 11.5 kW (S6-40% ED) - Spindle Torque: 43 Nm (S1-100% ED at 1,880 rpm) / 58 Nm (S6-40% ED at 1,880 rpm) - Tool Interface: SK 40 DIN ISO 7388-1 Form AD (formerly DIN 69871 AD) with pull stud DIN ISO 7388-3 Form AD (formerly DIN 69872) - Tool Clamping: Mechanical, clamping force 10,000 N, hydraulic release - Vertical Milling Head: Direct-driven, manually tiltable -5/+90°, extendable quill with turnstile (stroke 70 mm, clampable) - Rigid Angle Table Surface: 800 x 425 mm - Table T-Slots: 6 x 14 H7 (pitch 63 mm) - Max. Table Load: 300 kg - Tool Changer: 20-station disc magazine, SK 40 - Max. Tool Diameter: 75 mm (full magazine) / 150 mm (with adjacent empty pots) - Max. Tool Length: 250 mm - Max. Tool Weight: 8 kg - Tool Change Time: approx. 3 s (chip-to-chip approx. 15 s) - Positioning Accuracy (ISO 230-2): 0.008 mm (direct linear measuring systems) - Repeatability (ISO 230-2): 0.006 mm (direct linear measuring systems) - Measuring System: HEIDENHAIN absolute direct linear measuring system (resolution 0.001 mm) - Coolant Through Spindle (IKZ): 50 bar high-pressure pump (26 l/min), 4-stage pressure adjustment (15/25/40/50 bar), 25 µm double switch filter - Internal Air Cooling: Through-spindle air cooling, M-function programmable - External Air Cooling: Flexible articulated hose, M-function programmable - Paper Band Filter Unit: Trommel-mulden filter with 600 l external tank, type VDF150/50/50 (150 g/m²) filter fleece (dimensions: 1800 x 860 x 1620 mm) - Chip Conveyor: Hinge-belt conveyor integrated into 115 l coolant tank, 60° incline, lateral discharge left (height 870 / 1060 / 1200 mm) - Workpiece Probe: HEIDENHAIN TS 460 3D probe (infrared) with SE 661 transceiver - Additional Axes Preparation: 4th axis preparation (axis controller in electrical cabinet, pre-wired interface) - Automation Interface: Preparation kit for EDUCATION4.0 Cobot cell (Harting connector I/O interface, pneumatic connection, plus 2x pneumatic table connections max. 6 bar) - Enclosure Door: Automatic sliding front door driven by belt drive (manual push button & programmable) - Software Option: OCM (Optimized Contour Milling) for advanced trochoidal milling - Handwheel: HEIDENHAIN HR 510 FS electronic handwheel with axis selection and emergency stop - Operating Voltage: 400 V, 50 Hz - Power Consumption: approx. 21 kVA - Control Voltage: 24 V - Compressed Air Supply: 6.5 - 10 bar (min. 6.5 bar required at machine) - Machine Weight: approx. 2,900 kg (with tool changer) Gkodpo Af Nzujfx Akhod

Condition: used, Year of construction: 2019, control Fanuc Series 31i - B workpiece length - max. 300 mm grinding wheel diameter 356 mm Gkjdjy Tprpepfx Akhjd grinding wheel width 75 mm quill stroke 45 mm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 100 kg, grinding diameter: 300 mm, type of input current: three-phase, spindle speed (max.): 2,450 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 260 mm, feed length Z-axis: 750 mm, grinding spindle motor power: 5,500 W, overall weight: 5,500 kg, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 12 m/min, input voltage: 400 V, CNC Cylindrical grinding machine JONES AND SHIPMAN Surprema 650 M EASY TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 Godpfxe Akcf Ds Akhekd CNC control: GE FANUC Quick Panel Centre distance: 650 [mm] Max. grinding diameter: 300 [mm] Stroke X axis: 260 [mm] Max. Stroke speed X axis: 6000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 750 [mm] Max. Stroke speed Z axis: 12000 [mm/min] Resolution Z axis: 0.0001 [mm] Min. grinding wheel speed: 1000 [rpm] Max. grinding wheel speed: 2450 [rpm] Grinding spindle motor power: 5.5 [kW] B axis swivelling stroke: 190° / 45 [°] B axis indexing precision: 0.02 [°] Internal workpiece spindle nose: Morse 5 Workpiece spindle max. speed: 660 [rpm] Workpiece swiveling range: 15 [°] / 90 [°] Workpiece spindle power: 1.2 [kW] Type of attachment tailstock: Morse 3 Tailstock quill stroke: 30 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: Ø +/- 0.05 [mm] Max. load between centers: 100 [Kg] Supply voltage: 400 [V] Weight: 5500 [Kg] More information upon request.

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 820 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 400 mm, total height: 2,300 mm, total width: 2,160 mm, table width: 254 mm, table length: 1,370 mm, table load: 300 kg, overall weight: 1,260 kg, spindle speed (max.): 4,200 rpm, product length (max.): 2,400 mm, number of axes: 3, This 3-axis Optimum MF 4-B was manufactured in 2018. It features a maximum drilling capacity of 24 mm and a cutter head size of up to 76 mm. The machine includes a robust cross table size of 1370 x 254 mm and a maximum spindle speed of 4200 rpm. If you are looking to get high-quality milling capabilities, consider the Optimum MF 4-B milling and drilling machine we have for sale. Contact us for further details. - Description: 3-axis manual conventional milling and drilling machine with sleeve feed, tiltable milling head, rotatable spindle head carrier and position indicator- Face Cutter Capacity: max. Ø 76 mm- End Mill Capacity: max. Ø 25 mm- Drilling Capacity (Steel S235JR): Ø 24 mm- Continuous Drilling Capacity (Steel S235JR): Ø 20 mm- Throat Depth: 0 - 420 mm- Quill / Sleeve Stroke: 127 mm- Spindle Taper: ISO 40 - DIN 2080- Spindle Speed: 60 - 4200 rpm (min-1)- Gear Steps: 2 / continuously variable in steps- Automatic Quill Feeds: 0.04 | 0.08 | 0.15 mm/rev- Motor Power: 2.2 kW | 400 V - 50 Hz- Milling Head Tilt (Front / Back): +/- 45 degrees- Milling Head Tilt (Left / Right): +/- 90 degrees (horizontal)- Ram Overarm Travel: 470 mm- Distance Spindle to Table: max. 405 mm- Table T-Slot Size / Pitch / Qty: 16 mm / 63 mm / 3- X-Axis Travel (Manual / Power Feed): 820 mm / 740 mm- Y-Axis Table Travel (Manual / Power Feed): 410 mm / 330 mm- Z-Axis Knee Travel (Manual / Power Feed): 400 mm / 320 mm- Main Motor Power: 2.2 kW (400 V / 3 Ph / 50 Hz)- Coolant Pump Power: 90 W- Included Accessories: Coolant system, chip tray, and operating tools Gkjdpfxjzq Dk Es Akhed Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 0166, spindle bore: 105 mm, quill stroke: 300 mm, spindle speed (min.): 26 rpm, spindle speed (max.): 2,000 rpm, total length: 4,700 mm, total width: 2,260 mm, total height: 2,260 mm, type of input current: AC, overall weight: 4,800 kg, distance between centers: 2,000 mm, number of tool stations in tool turret 3: 8, Cycle-controlled turning machine with Fagor 8055i control Model: UT 660x2000 Turning diameter over bed 660 mm Turning diameter over carriage 460 mm Turning diameter in the bed bridge 960 mm Distance between centers 2000 mm Maximum turning length 1650 mm Headstock Spindle bore 105 mm Spindle head Camlock D1-11 DIN 55029 Spindle taper MK8 with reducing sleeve MK6 Spindle speeds (3 ranges, stepless) Low 26 – 224 rpm Medium 225 – 670 rpm High 671 – 2000 rpm Drive nN = 1500 rpm / NN = 96 Nm / IN = 34 A (50 Hz) Tailstock Quill stroke 300 mm Quill diameter 105 mm Taper quill MK6 Saddle Longitudinal travel (Z-axis) 1700 mm Z – Rapid traverse 6 m/min Z – Feed rate 1 – 3000 mm/min Z – Drive nN = 3000 rpm / NN = 14.5 Nm / IN = 8.5 A (50 Hz) X – Rapid traverse 6 m/min X – Feed rate 0.5 – 3000 mm/min X – Drive nN = 3000 rpm / NN = 6.0 Nm / IN = 4 A (50 Hz) Turret (8 tool stations) Tool holder VDI (8x) Coolant pump Coolant pump tank volume = 115 l Lubrication unit Pump (lubrication for Z+X saddles) Tank volume = 2 l Machine bed Machine bed width 480 mm Max. turning length 1650 mm Power 39.3 A Power 24 kW Mechanical data Overall length 4700 mm Overall width 2250 mm Overall height 2260 mm Net weight 4800 kg Gross weight 5500 kg All of the above technical data are for reference only. Control type CNC Condition Used Year of manufacture 2013 Machine is powered Yes Weight 4800 kg Width 4.7 m Height 2.26 m Depth 2.25 m Gsdpfo Agcnnex Akhekd This offer is exclusively aimed at entrepreneurs within the meaning of § 14 BGB. No returns on used goods! No warranty.