Used Radial Fan for sale (4,334)

Condition: used, Radial fan, fan, blower, control cabinet fan Control cabinet fan, radial module with support spider EBM PAPST Type K3G450-AZ30-61 Year of manufacture: 2015 Motor: M3G150-IF Bledpfx Ao Agw Enodhep Design: Radial Air flow rate: max. 8040 m³/h Pressure increase: 1492 Pa Fan: Ø 450 mm Number of blades: 7 Power connection: 3~ 380-480 VAC 50 / 60 Hz Nominal speed: 2750 rpm Power: 5370 Watts at 400 VAC Rated current: 8.3 A at 400 VAC Efficiency: 64.9 % Efficiency grade N: 67.7 External mounting frame: 550 x 550 mm Operating mode: Continuous operation (S1) Bearings: Maintenance-free ball bearings Protection class: IP55 Insulation class: F Compliance with standards: EN 61800-5-1; CE Approvals: CSA C22.2 No. 77 + CAN/CSA-E60730-1; UL 1004-7 + 60730-1; EAC Technical features: - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameterization) - External enable input - Fault alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS485 MODBUS-RTU - Soft start - EEPROM write cycles max. 100,000 - Control input 0-10 VDC / PWM - Control interface with safety-isolated SELV potential - Over-temperature protection, electronics / motor - Under-voltage / phase failure detection Dimensions W x H x D: 550 x 550 x 480 mm Weight: 54 kg Very good condition - from a test setup

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Boded Nqlcepfx Adhelp Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: used, Höcker Polytechnik Type L 350 radial fan for extracting swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or small machine fleets and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Technical data: - Motor power: 11 kW Bsdpfx Aezryptedhjlp - Inlet: 350 mm - Outlet: 350 mm - Air flow rate: 9,770 m³/h

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation blower, exhaust gas extraction, extraction blower -Manufacturer: Dietz, radial fan, radial ventilator, exhaust fan -Type: DG 71 b 1286 -Volume output: 13 m³/min Bode Ad Ab Tepfx Adhjlp -Motor: Dietz 0.48 kW -Speed: 2340 rpm -Protection class: IP 44 -Inlet connection: Ø 120 mm -Outlet connection: Ø 95 mm -Fan wheel: Ø 320 x 45 mm -Number: 3x extraction fans available -Price: per piece -Dimensions: 430/410/H295 mm -Weight: 16.8 kg/pc.

Condition: used, Venti Oelde High-Performance Radial Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High-Performance Radial Fan Volume flow: 2559 m³/h Pressure: 12 bar Temperature: 300 °C Bjdpfx Aewxu Rnedhjlp Density: 0.608 kg/m³ Power: 0.9 kW Speed: 2840 1/min Weight: 180 kg Year of manufacture: 2017 More items – new and used – can be found in our shop! International shipping costs available upon request!

Year of construction: 2013, condition: excellent (used), - ATEX: II G / 2G c IIA – T2 - Year of manufacture: 2013 - Motor: 2.5 kW / 400 V, 50 Hz, 2875 rpm - High-pressure fan: 5,077 Pa / 3,300 Pa - Volume flow rate (m³/h): 103 - Very few operating hours - In perfect condition Bledpfx Adj Abbnashsp

Condition: good (used), volume flow: 3.69 m³/h, power: 30 kW (40.79 HP), For sale is a tested radial fan from Pollrich, equipped with suction air control and a Siemens electric motor. Technical data: • Manufacturer: Pollrich • Motor: Siemens 30 kW • Airflow: 3.69 m³/s • Pressure: 4800 Pa • Speed: 3277 rpm • Max. speed: 3340 rpm Bledpfjy El Iwex Adhop • Medium temperature: up to 60 °C The blower is mounted on a sturdy base frame and is suitable for industrial extraction, conveying air, or process air applications. Condition: used, tested Voltage: 3 x 400 Volts Speed: 2940 rpm

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Place of origin: Germany​ Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Bljdpfxjxt I Nke Adhop Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: used, Gebhardt Q2M-P2B6N-PAC RD Radial Fan, 20,000 m³/h Gebhardt Q2M-P2B6N-PAC RD Radial Fan 20,000 m³/h 7.50 kW n max: 1782 t max: 250 p: 1,200 Motor Siemens UD V 50 Hz 7.5 kW 8.6 kW 60 Hz 1160/min Dimensions: Height without motor = 64 cm Height with motor = 95 cm Width = 102 cm Depth = 102 cm Weight approx. 280 kg You can find more radial fans – new and used – in our shop! Bsdpfeicav Djx Adhjlp International shipping costs available upon request!

Condition: used, Second-hand Schuko radial fan for wall mounting, for extracting wood dust, shavings and similar materials. Bodpszw Ewgefx Adhslp Technical data: - Motor: 4 kW - Connection: 250 mm

Year of construction: 2009, condition: used, machine/vehicle number: WW12698, Product Information "Radial Medium-Pressure Fan" Radial Medium-Pressure Fan Type/Model: Elektror RD 64 Condition: Used, very good Technical Data Volume Flow max.: up to 142 m³/min Pressure max.: up to 10,600 Pa (total pressure increase) Motor Power: 1.5 kW Dimensions: approx. 600 x 440 x 720 Weight: approx. 42 kg Inquiry Item: Shipping costs will be provided in an individual quote. Blodpfszm N Nxjx Adhop

Condition: excellent (used), functionality: fully functional, dust, chip extraction fan 18.5kw 8700m3/h 4940Pa centrifugal fan. manufacturer: Klima Celje Blsdehu Aw Hspfx Adhop air flow:8700m3/h pressure:4940Pa motor power:18.5Kw 400v 50Hz speed: 2930 impeller diameter:700mm suction opening:250mm pressure side chimney:440 mm overall dimensions:800x1200x1500mm weight:ca 375kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 1990, condition: excellent (used), functionality: fully functional, KOJA radial fan 200kW 110.000m3 exhaust blower /ct1789/ KOJA Electrical power: 200kW, 50Hz Year of manufacture: 1990 Impeller diameter: 1200mm Impeller material: Operating pressure: 2.94kPa -- (300 water mm) Capacity: 100.000m3/h -- m3/s -- 1050kg/h Transportable particle: 0,5 - 15mm -- 20-25kg/m3 Overall dimensions: Blodpswin Eaefx Adhop Height 2500 x width:2000 x length:3000mm Weight:4400kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible

Condition: used, Radial fan, fan, Dahlander electric motor, three-phase motor with 2 speeds, 1.6 kW + 6 kW, BLECHER type 132 S4 / 2 For exhaust, cooling, or ventilation Fan impeller diameter: Ø 400 mm Fan impeller width: 175 mm Shaft diameter, motor shaft: Ø 38 mm Motor design: Dahlander star / double star Motor speed: 1440 / 2870 rpm Number of poles: 8 / 4 Blsdpfx Adszinyhehsp Motor power: 1.6 / 6 kW Mains connection: 400 volts, 50 Hz - Dahlander three-phase motor with 2 speeds - Fan impeller made of metal - Fan cover made of metal, Ø 465 mm - Electric motor with standard foot flange, mounting holes Ø 11.5 / hole spacing 215 x 140 mm Space requirement L x W x H: 570 x 465 x 465 mm Weight: 57 kg Good condition 2 units available, price per unit.

Condition: used, Radial fan with sheet metal housing, type H15 /400-M Serial no. 27265 Year of manufacture 1977 Inlet pipe Ø 200 mm Outlet pipe Ø 110 mm Impeller diameter approx. Ø 700 mm Impeller width approx. 90 mm Airflow 0.25 m3/s = 900 m3/h Total pressure difference 4000 N/m2 = Pg: 400 kg/m2 Specific gas weight at 20°C 1.2 kg/m3 Temperature range max. 70°C Motor speed 2850 rpm Motor power 2.2 kW Mains connection 400 V, 50 Hz - Sheet metal housing Bsdpfx Aexcitvodhelp - sturdy metal base Required space (L x W x H) 740 x 520 x 1540 mm Weight approx. 80 kg in good condition

Condition: used, Radial fan, high pressure radial fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower Bsdpfx Adstxkwpohjlp -Manufacturer: ebm, radial fan extraction fan -Type: unfortunately without type designation -Voltage: 220V -Speed: 1080 rpm -Inlet: Ø 190 mm -Air duct connection: 285 x 145 mm -Number: 2x blowers available -Price per piece -Dimensions: 360/320/H375mm -Weight: 12 kg/piece

Condition: used, Radial fan with an aluminum cast housing, filter fan Bsdpoztrv Ijfx Adhslp Motor power: 1.8 kW Mains connection: 380 volts, 50 Hz Weight: approx. 30 kg

Condition: new, Year of construction: 2026, CORMAK FAN4000 Material Handling Fan – High-Performance Industrial Dust and Chip Extraction The CORMAK FAN4000 is a professional material handling fan designed for industrial dust extraction systems used to transport wood chips, sawdust, and dry particulate waste. Equipped with a high-performance centrifugal impeller and a powerful 4.0 kW motor, the unit delivers an impressive 6,500 m³/h airflow, making it an ideal solution for large woodworking shops and manufacturing facilities. Designed for continuous operation, the FAN4000 efficiently serves multiple woodworking machines generating dry waste. Main advantages of the machine Airflow capacity of 6,500 m³/h – efficiently removes dust, chips, and sawdust from multiple workstations. 4.0 kW / 400 V industrial motor – designed for continuous operation in industrial environments. Motor speed of 2,850 rpm – ensures reliable performance even under heavy workloads. Large Ø250 mm inlet and outlet connections – enable easy integration into industrial ducting and extraction systems. Compact dimensions (670 × 600 × 600 mm) – simplify installation in confined technical areas. Heavy-duty steel housing – resistant to vibration, mechanical damage, and corrosion. Construction and technology The FAN4000 has been engineered for demanding industrial environments. At its core is a centrifugal impeller dynamically balanced and mounted directly on the motor shaft. This direct-drive design minimizes power losses while eliminating the need for belts or additional transmission components. The powder-coated steel housing protects internal components against dust, moisture, and chemical exposure. High-quality bearings ensure long service life, smooth operation, and reduced noise levels. Precision and operating efficiency Thanks to its high airflow capacity, the FAN4000 efficiently transports large volumes of dry waste in real time. By maintaining constant negative pressure throughout the extraction system, it helps prevent clogging of filters, ductwork, and machinery. This contributes to stable production processes while protecting machine components from excessive wear. The FAN4000 is ideally suited as a central extraction fan for integrated dust collection and material handling systems. Applications The FAN4000 industrial extraction fan is suitable for: industrial woodworking facilities, Bodpfx Adovuqyrehelp furniture, window, and door manufacturing, workshops processing solid wood, MDF, and HDF, CNC machining centers and automated woodworking machines, conveying wood chips and sawdust to cyclones, silos, or collection containers. Standard equipment 4.0 kW three-phase motor (400 V) Direct-drive centrifugal impeller Powder-coated steel housing Ø250 mm inlet connection Ø250 mm outlet connection Optional equipment Flexible Ø250 mm suction and discharge hoses Connection reducers and machine adapters Cyclone separators and final-stage filters Blast gates, elbows, and duct tees Automatic machine start control systems Technical specifications Parameter Value Maximum airflow 6,500 m³/h Inlet diameter 250 mm Outlet diameter 250 mm Motor speed 2,850 rpm Dimensions (L × W × H) 670 × 600 × 600 mm Motor power / Voltage 4.0 kW / 400 V Weight 53 kg

Condition: used, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology Bljdpfx Ade Afnuzshep The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg PLEASE NOTE!!! This machine is a returned item; it has minor damage to the casing and bent grilles. It has been partially repainted. NO WARRANTY AND NO RETURNS!

Condition: new, Year of construction: 2026, CORMAK FAN5500 Material Handling Fan – High-Capacity Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN5500 is a high-performance centrifugal material handling fan engineered for intensive industrial extraction of sawdust, wood chips, dust, and other dry particulate materials. Powered by a 5.5 kW three-phase motor and equipped with a high-efficiency centrifugal impeller, the FAN5500 delivers an impressive airflow of up to 8,000 m³/h, making it an ideal solution for woodworking factories, furniture production facilities, and centralized dust collection systems. Key Advantages Airflow up to 8,000 m³/h – ideal for multi-machine installations and production lines Powerful 5.5 kW motor – ensures reliable performance under continuous heavy-duty operation Large connection ports – Ø300 mm inlet and Ø250 mm outlet for compatibility with various extraction systems Compact yet robust construction – excellent vibration resistance and long service life 400 V three-phase power supply – designed for industrial installations Construction and Technology The FAN5500 features a high-efficiency centrifugal impeller driven directly by a powerful electric motor, minimizing power losses while maximizing airflow. Its heavy-gauge steel housing is powder-coated for superior resistance to corrosion, abrasion, and mechanical damage. The aerodynamic design optimizes air movement while reducing energy consumption. Despite its high performance, the compact footprint allows easy installation where space is limited. Performance and Efficiency The CORMAK FAN5500 efficiently extracts large volumes of sawdust and airborne particles from multiple workstations simultaneously. Maintaining continuous high airflow helps prevent duct blockages, extends the service life of machinery and filtration systems, and significantly improves workplace cleanliness. Effective dust extraction also enhances operator safety by reducing airborne dust concentration and minimizing fire hazards. Applications The FAN5500 is ideally suited for: Woodworking and furniture manufacturing facilities Workshops processing solid wood, MDF, plywood, and engineered wood products Centralized industrial dust collection systems CNC routers, panel saws, spindle moulders, planers, and sanding machines Pneumatic conveying systems for dry wood waste Standard Equipment 5.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller Powder-coated steel housing Ø300 mm inlet connection Ø250 mm outlet connection Heavy-duty support frame Optional Equipment Wear-resistant flexible extraction hoses Cyclone separators Automatic start/stop control systems Bljdpfx Adevughlohjp Extraction arms, adapters, and duct reducers Technical Specifications Parameter Value Maximum Airflow 8,000 m³/h Inlet Diameter 300 mm Outlet Diameter 250 mm Motor Speed 2850 rpm Motor Power 5.5 kW Power Supply 400 V Dimensions (L × W × H) 670 × 600 × 600 mm Weight 55 kg

Condition: used, Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction, radial duct fan -Manufacturer: Maico, radial tube fan type ERR 12/1 -Voltage: 220V -Power: 62 W -Protection class: Iso-Kl.B G 42 -Connection input: Ø 120 mm -Connection output: Ø 125 mm -Fan wheel: Ø 330 x 170 mm -Dimensions: 420/270/H250mm -Weight: 3.5 kg/piece Bsdpfxsttnuwo Adholp

Condition: new, Year of construction: 2026, CORMAK FAN2200 Material Handling Fan – High-Performance Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN2200 is a high-performance industrial material handling fan designed for efficient extraction of sawdust, wood chips, dust, and other airborne particles generated during the processing of wood, engineered wood products, plastics, and composite materials. Equipped with a 2.2 kW three-phase motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 4,000 m³/h, providing reliable support for industrial dust extraction systems while maintaining a clean and safe working environment. Key Advantages Airflow up to 4,000 m³/h for efficient transport of dust and wood waste 2.2 kW / 400 V motor designed for continuous industrial operation 2850 RPM operating speed ensures powerful and consistent airflow Large connection diameters – Ø200 mm inlet and Ø180 mm outlet Compact dimensions (575 × 550 × 500 mm) suitable for stationary and mobile installations Heavy-duty steel construction built for demanding workshop and industrial environments Construction and Technology The FAN2200 features a direct-drive centrifugal impeller mounted directly on the motor shaft, reducing power losses while improving reliability and efficiency. The dynamically balanced impeller minimizes vibration and operating noise, ensuring smooth, trouble-free performance. The powder-coated steel housing offers excellent resistance to wear, corrosion, and mechanical damage. The fan can be used as part of a centralized dust extraction system or as a dedicated extraction unit for individual machines. Performance and Efficiency With an airflow of 4,000 m³/h, the CORMAK FAN2200 effectively removes fine dust as well as heavier wood chips generated by thickness planers, spindle moulders, panel saws, and CNC machines. Designed for continuous-duty operation, it maintains stable suction performance even in high-dust environments, helping to extend filter life, reduce machine wear, and improve overall air quality in the workplace. Applications The CORMAK FAN2200 is ideal for: Woodworking and furniture manufacturing facilities CNC machining workshops Plastic processing plants Centralized dust collection systems Industrial production lines generating high volumes of dust and chips Its flexible connection options also allow the FAN2200 to operate as either a standalone extraction fan or as part of a larger pneumatic conveying system. Standard Equipment 2.2 kW / 400 V three-phase electric motor Direct-drive centrifugal impeller Powder-coated steel housing Ø200 mm inlet connection Ø180 mm outlet connection Optional Equipment Flexible suction and discharge hoses (Ø180–200 mm) Adapters and duct reducers Textile or bag filtration systems Timer controls and remote start systems Technical Specifications Parameter Value Maximum Airflow 4,000 m³/h Inlet Diameter 200 mm Outlet Diameter 180 mm Motor Speed 2850 rpm Motor Power 2.2 kW Power Supply 400 V Bsdpevugg Usfx Adhelp Dimensions (L × W × H) 575 × 550 × 500 mm Weight 35.5 kg

Condition: new, Year of construction: 2026, FAN1500 Material Handling Fan – Compact Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN1500 is a compact industrial material handling fan designed for efficient extraction and pneumatic transport of sawdust, wood chips, dust, and other dry particles generated during the processing of wood, plastics, and composite materials. Equipped with a 1.5 kW motor and a high-efficiency centrifugal impeller, it delivers an airflow of up to 3,000 m³/h, making it a reliable component of professional dust extraction systems. Key Advantages Airflow up to 3,000 m³/h – efficient extraction and transport of sawdust and airborne dust 1.5 kW / 400 V motor – designed for continuous industrial operation 2850 RPM operating speed – ensures strong and consistent airflow 150 mm inlet and outlet connections – easy integration into dust collection systems Compact dimensions (575 × 510 × 500 mm) – suitable for workshops with limited installation space Heavy-duty steel construction – durable and resistant to demanding workshop conditions Construction and Technology The FAN1500 features a direct-drive centrifugal fan with an aluminum impeller mounted directly on the motor shaft. This design minimizes power losses while maximizing aerodynamic efficiency. The powder-coated steel housing provides excellent protection against corrosion and mechanical damage, while the rigid one-piece construction reduces vibration and operating noise. The fan can operate as a standalone extraction unit or as part of a larger centralized dust collection system. Performance and Efficiency The high rotational speed combined with the optimized impeller geometry ensures smooth and consistent airflow, even in environments with heavy dust concentrations. The FAN1500 efficiently transports fine and medium-sized wood waste without clogging, making it ideal for continuous industrial operation in woodworking shops, CNC production facilities, and manufacturing lines. Applications The CORMAK FAN1500 is suitable for: Woodworking workshops Furniture manufacturing facilities CNC machining centers with dedicated dust extraction Mobile dust collection systems Production lines generating sawdust and fine dust Plastic and composite material processing Standard Equipment Powder-coated steel housing 1.5 kW / 400 V three-phase motor Direct-drive centrifugal aluminum impeller 150 mm inlet connection 150 mm outlet connection Heavy-duty mounting frame Optional Equipment Flexible suction and discharge hoses (Ø150 mm) Adapters and reducers for different duct sizes Textile filter bags, cyclone separators, and final-stage filters Remote control and timer switch systems Technical Specifications Parameter Value Maximum Airflow 3,000 m³/h Inlet Diameter 150 mm Outlet Diameter 150 mm Motor Speed 2850 rpm Motor Power 1.5 kW Bsdpfovuggbox Adhjlp Power Supply 400 V Dimensions (L × W × H) 575 × 510 × 500 mm Weight 32.5 kg

Condition: good (used), Fan, ventilator, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan Blsdpfxodwlp Io Adhjp Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47 kW -Fan diameter: 570 mm -Protection class: IP 44 -Number: 5x radial fans available -Price: per piece -Weight: 16.5 kg

Year of construction: 2020, condition: good (used), Fan, ventilator, electric motor, blower, blower, radial fan, emergency ventilation fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan -Type: R3G250-RK55-05 Bedjxn Nukepfx Adhslp -Voltage: 48 VDC -Speed: 2250 rpm -Power: 105 W -Number: 2x fans available -Price: per piece -Dimensions: 250/105/H265 mm -Weight: 2.1 kg