Schuko radial fan

Schuko

Condition: used, Year of construction: 1997, Air supply system Manufacturer: Schuko Type: WZL 89 Year of manufacture: 1997 Technical data Dksdpfs Ah E R Nsx Apmow - Airflow rate: 8900 m3/h - Heat output: 115 kW - Motor: 2.5 kW - 2 speeds - Heating coil - Air supply filter Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding.

Condition: excellent (used), functionality: fully functional, Gas boiling kettle Dkodpfx Apov Urudsmjw Brand Spako Capacity 1100l Voltage 230V 50Hz Basket included

Condition: used, Year of construction: 2002, Extraction system Manufacturer: Schuko Type: Vacumat 160 Year of manufacture: 2002 Technical data - V Nominal flow rate: 1950 m3/h - V min.: 1441 m3/h - Motor power: 2.2 kW - Nominal speed: 2850 RPM - Nominal current: 4.6 A - Nominal operating voltage: 400 V - Frequency: 50 Hz - Fan motor: 3-phase 400 V, 2.2 kW, 50 Hz, 2800 RPM Dsds Ah E Rwopfx Apmskw Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2015, Length 12000 mm Width 9000 mm Used manual overhead conveyor system with a SCHUKO paint mist extraction unit and a warm-air supply system. Includes a cross-flow heat exchanger (heat recovery) and a manual overhead conveyor; in very good, well-maintained condition. Manufactured 2015–2016. ----- Dedpfx Apo Ahkkhjmjkw Sold on behalf of a client! The system is still in operation and available for inspection. Price is ex-site; dismantling to be performed by the buyer ((Scissor lift and forklift available on-site)). Group 1: Dry-type paint mist extraction system, model FARBMEISTER: ----- Model FARBMEISTER-25/30, including a stationary paint mist extraction wall with dry-type filtration. Baffle/filter area: H x W 2,790 x 3,140 mm (cardboard filter cells). Features a centrally positioned, solid baffle panel designed to reduce the maximum required airflow, tailored to the specific frames and casements being painted. Includes an additional pull-down pre-filter. This reduces the effective extraction area—and consequently the total airflow—from a standard ~14,000 m³/h to the required 10,500 m³/h. Also includes a 250 mm deep extension around the perimeter (left, right, and top) to improve the capture of overspray. A high-performance centrifugal fan (model L-EX 500) with a 5.0 kW motor, capable of an exhaust air volume of 10,500 m³/h (free-blowing), including all necessary ductwork and components to construct and install the extraction system—extending through the wall to the outside—as well as a manually adjustable exhaust air damper. Group 2: Warm Air/Supply Air System for the Spray Booth: ----- BB 1,100 warm air/supply air system for the spray booth, including a supply air unit (model WZL110-com) equipped with an integrated heating coil (hot water connection, supply temperature +80°C). The unit has an air capacity of 10,500 m³/h and a 5.0 kW motor. The required heating capacity, based on a temperature differential (Delta-T) from -15°C to +22°C, is 137 kW. The system features an automatic louver damper at the air intake to seal off the ductwork and prevent cold air from entering when the system is not in operation. It also includes an explosion-proof warm-air thermostat designed to shut down the system in the event of a loss of heating capacity (hot water supply). This group encompasses all ductwork and supply air components, spanning from the external air intake to the air outlets in the distribution ceiling located above the spray wall. A cross-flow plate heat exchanger for heat recovery from the exhaust air duct leading outdoors, while simultaneously preheating the fresh air drawn in from outside. With an exhaust air temperature of +20°C and a fresh air temperature of -12°C, this results in an energy saving of approximately 58 kW of heating capacity. Includes all necessary duct and pipe components for integrating the exhaust and supply air lines with the plate heat exchanger, in accordance with the attached planning drawing. Also includes a maintenance/repair switch and a differential pressure monitor for supervising the intake filter. Please note that the heat exchanger core must remain easily accessible for routine maintenance and cleaning. Group 3: Electrical System Control for Paint Mist Extraction: ----- Electrical system control for paint mist extraction...

Condition: as good as new (ex-display), As new Orbmix / N&N 500 litre Z arm mixer for heavy products such as Doner kebab mix or various bakery products and date paste etc. This machine has been used for a few demonstrations so is still in near new condition. Djdpsy Iuu Sefx Apmskw

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Dkodpsvxk Anjfx Apmew Storage location: Nattheim

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor Dkodpfx Ajr R Ewlepmow - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: used, Used Wolfking TSMG 1500/250 stainless steel ASI 304 / 1.4301 horizontal twin paddle mixer total capacity 1 500 ltr. Mixing chamber measures approx. 1 500 mm length x 1 600 mm width. Total lenght of mixer is 3 200 mm. Total height of mixer is 2 200 mm. There is two horizontal twin paddle agitators in the mixing chamber. Agitators speed is 20 PRM driven by two el. motors 7,5 kW. One side discharge with screw installed in the bottom of chamber driven by el. motor 55 kw, 160 PRM. Included: control panel, switchboard Dkodpfx Apjzn N H Tjmjw

Condition: good (used), Year of construction: 2002, functionality: fully functional, volume flow: 3,600 m³/h, total length: 2,650 mm, total height: 1,355 mm, total width: 800 mm, nominal power: 1.5 kW (2.04 HP), Schuko paint mist extraction wall, Farbmax model Year of manufacture: 2002 Airflow rate: 3600 m³/h Motor power: 1.5 kW Protection class: EExe, II, PTB No. Ex-86/34 Djdpfx Ao Ah H Hrepmekw Dimensions (L/W/H): 2650 x 800 x 1355 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, volume flow: 5,500 m³/h, total length: 2,650 mm, total height: 1,860 mm, total width: 800 mm, intake manifold diameter: 350 mm, power: 2 kW (2.72 HP), intake vacuum (max.): 920 mbar, Schuko Paint Mist Extraction Wall SUPERMAX Year of manufacture: 2010 Nominal volume flow rate: 5,500 m³/h Impactor area: 3.2 m³/h Negative pressure: 920 Pa ATEX: EX III 2G EExe Dkodpo Ah Ekxjfx Apmjw L/W/H: 2650x800x1860 mm As inspected, available for pickup at the Seevetal location, Ex works, without transportation, Subject to prior sale.

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Dksdpfxjvlz Arj Apmjw Condition: Used Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2004, Used machine with separate base frame for Vacomat S/N and discharge screw Year of manufacture: 2004 Features and Technical Specifications SCHUKO VacoVent 750 fan unit - Clean air exhaust fan for SCHUKO Vacomat filter systems - Motor power: 7.5 kW - Nominal airflow: 5,089 m³/h - Associated negative pressure: 3,720 Pa Dkodpfs Af I Imex Apmew - Sound pressure level: 72 dB(A) - Compact, separate fan unit for integration into a compatible extraction system Separate base unit for Vacomat S/N - Equipped with a motor-driven discharge screw - Mechanical discharge of collected dust and chip material for further conveyance - Gear motor power: 0.55 kW - Operating voltage: 400 V - Current consumption: 1.55 A - Frequency: 50 Hz - Screw drive speed: 11 rpm - 3-phase alternating current - Manufactured in Germany Shipping dimensions: - Fan unit: 1,230 × 840 × 905 mm - Base frame: 1,400 × 1,280 × 1,100 mm - Base frame weight: 268.5 kg

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1990 Features and Technical Specifications - Motor: 11 kW - 2600 pa - Inlet openings: 350 mm Dkedps Af I Ifefx Apmsw

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, ZELAIETA TXA ROLL TOP 1000 – DIVIDER FOR HIGH-HYDRATION DOUGH Manufacturer: Zelaieta Model: TXA Roll Top 1000 Working width: approx. 1,000 mm Industrial divider designed for processing fermented and highly hydrated dough, especially for the production of ciabatta, rustic breads, and similar products. The dough is fed and gradually laminated by a roller system, allowing for maximum preservation of the dough’s structure and air pockets before the cutting phase. The machine enables continuous and consistent production, with adjustment of the dough thickness and adaptation of the cutting dimensions according to the desired product. Particularly suitable for industrial lines seeking gentle dough processing with minimal mechanical stress. Possible applications: Dodsz Ihzaopfx Apmskw - Ciabatta - Rustic breads - Rectangular breads - High-hydration doughs - Fermented dough products Robust construction in stainless steel, suitable for intensive industrial use.

Condition: used, Year of construction: 1996, Suction nozzle diameter: 120mm Nominal volume flow: 980 m³/h Volume flow monitoring: Pressure difference display Negative pressure: 1100 pa Filter area: Filter cleaning: manual Motor power: 2.2 kW Dkjdpfstqv Ixjx Apmow Machine length: Machine width: Machine height: Weight: