Used Range-Press for sale (25,139)

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Fpodpfxjuf Sy Ao Aa Esd Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Fpedpjv Nv Taofx Aa Esd Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 11,500,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Fsdpfx Aajv Nwgns Ejpd Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: ready for operation (used), For sale: a very solid and fully operational Constantin Hang 150-06, the industry standard for press-fitting and crimping ring binder mechanisms onto folders, binders, and covers. Specifications and features: • Suitable for 2-ring and 4-ring mechanisms • Powerful mechanical eccentric press • Very robust German construction (cast iron) • Foot pedal operation for safe and fast working • Complete and ready for immediate use • Machine presses and crimps the legs of the ring mechanism in a single operation • Ideal for binderies, file manufacturers, and office supply production Currently set up for 2-ring mechanisms (80 mm), but can be easily adjusted for other mechanisms. Technical data: • Manufacturer: Constantin Hang • Model: 150-06 • Serial number: 102160 • Country of origin: Germany Fpsdpex A Ivvsfx Aa Esd Condition: Good, clean, and working condition. Can be demonstrated immediately.

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Fjdpfjfxygwjx Aa Espd Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Pressing force: 100 t Total force: 1,000 kN Ring serration force: 40 - 310 kN Counter-holder force: 10 - 270 kN Maximum material width: 180 mm Fodpsytcd Rofx Aa Ejpd Maximum material thickness: 5 mm Strokes per minute (min.): 20 rpm Strokes per minute (max.): 80 rpm Stroke: 50 mm Feed unit Maximum strip thickness: 5 mm Maximum strip width: 180 mm Maximum feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Maximum feed height adjustment: +40 mm Maximum distance between feed rollers: 20 mm Resolution (per rollers): 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & Weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two tool sets Note: Further technical details on the machine can be found in the attached operating manual.

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Fpedpjhmmfkefx Aa Eod Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Single-Column Eccentric Press WEINGARTEN Type EV 63 Machine No. 738 / 61 Year of manufacture: 1962 Pressing force: 63 tons Throat depth: 260 mm Table size: 630 x 530 mm Table opening: Ø 210 mm Ram area: 315 x 260 mm Fpjdpok S Htxjfx Aa Eod Adjustable ram stroke: 8–100 mm Ram adjustment: 63 mm Ram shank bore: Ø 40 mm, with clamping piece Installation height: max. 450 mm Strokes per minute: 115 spm Air requirement: min. 4.5 bar Motor power: 4 kW Electrical connection: 380 Volt, 50 Hz Table height above floor: approx. 750 to 900 mm - Electric stroke release via foot switch or two-hand control - Overload protection by shear plate - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC safety - Front crankshaft support bearing - Press table height adjustable via 2 threaded spindles - Manual central lubrication system - Free-standing electrical cabinet - UVV (accident prevention regulations) for manual loading operations Space requirements (L x W x H): 1750 x 1600 x 2430 mm Weight: 4.5 tons In good condition

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates Fpjdjwki Apjpfx Aa Ejd - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: ready for operation (used), Year of construction: 1998, This WILD door leaf press line was manufactured in 1998. It is designed for door production, handling dimensions from 1,800 to 2,300 mm in length, 500 to 1,300 mm in width, and thicknesses of 35, 40, and 44 mm. The line includes areas for gluing, pressing, and handling door panels with advanced feeding and transfer systems. If you are looking to get high-quality door production capabilities consider the WILD door leaf press line we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Dimensions for door production: lengths: 1800 - 2300 mm • Dimensions for door production: widths: 500 - 1300 mm • Dimensions for door production: thicknesses: 35 / 40 / 44 mm Extra Information Consisting of the following areas: Endless door panel gluing with frame laying station Fsdpfxeyaqmge Aa Espd Press line with hard fiberboard loading station First area consists of: Portal feeding Angle transfer with rip and cross cut saw Feeding and supply of longitudinal and cross frame parts from magazines Longitudinal cross-cut station for the longitudinal frame parts Connecting station for the frame parts with the door leaf core, equipped with clamping devices Conveyor belt angle transfer with shuttle transfer of the door leaf cores to the glued hardboard panels Second area consists of: Feeding of the hardboard panels Brush cleaning machine Hardener application machine from below Glue application machine from below Disk roller conveyor Angle transfer for the lower hard fiber board Vacuum turning device for the upper hard fiberboard Automatic loading station for hardboard panels and door leaf cores Two door presses with two x four pressing stations each, set up parallel to each other Both presses are loaded at the infeed with one shuttle loading basket Both presses are unloaded at the outfeed with one shuttle unloading basket Angular transfer to the infeed into a hedgehog buffer Angular transfer at the outlet of the hedgehog buffer and feeding for stacking One-sided vacuum destacking with protective plate placement Note: The technical data and descriptions are transcribed from the original order confirmation. The information is for reference only and is not legally binding.

Condition: good (used), Year of construction: 1999, operating hours: 50,702 h, functionality: fully functional, Just arrived, more pictures and a video will follow Bale Press Paal Konti 325 D/SO, year of manufacture 1999 Technical Data: Manufacturer: Paal Model: Paal Konti 325 D/SO Year of manufacture: 1999 Operating hours: 50,702 Pressing force: 94 t Total connected load: 128 kW Feed opening: 1020 x 1750 mm Bale dimensions: 750 x 1100 mm, length variable Tying: 4-fold automatic Throughput at 35 kg/m³ approx. 14 t/h 60 kg/m³ approx. 24 t/h 100 kg/m³ approx. 38 t/h Bale weight: 525 to 800 kg Fedpfx Aasym Sqys Ejpd Transport dimensions: approx. 12352 x 2340 x 2800 mm (LxWxH) Machine weight: approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Please note: All technical data is based on manufacturer information. We assume no liability for the stated information or possible errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspection by appointment possible. Sale takes place ex works, advance payment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 1994, Hydraulic press brake Fab. TRUMPF Typ. TrumaBend V50 Year 1994 Technical data: Trumpf Make: Trumpf Type: TrumaBend V50 Year of construction: 1994 Capacity: 50 t Effective length: 1270 mm Stroke: 215 mm Operating pressure: 290 bar Voltage: 3 x 400V Fjdpfor D Sdgjx Aa Espd Rated current: 12.5 A Connected load: 8.0 kVA Compressed air connection: 6 bar Dimensions: approx. L 2.00 x W 2.00 x H 2.40 m Weight: 4750 kg Equipment: Control unit - Control system: Delem DA-28 - Pneumatic die displacement - Hydraulic tool clamping top and bottom - Controlled axes: Y1, Y2, X, R - 3 manual stop fingers, pneumatically clampable - Tools: Punch set segmented, straight, 1050 mm, new Die V16, 30° 1000mm Die V08, 30° 1000mm Die V10, 30° 1000mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1992, Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Fsdpfx Aoh U A Ibsa Ejpd Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Fpodpfxsyr Tpne Aa Eed

Condition: used, Year of construction: 1976, total length: 2,200 mm, total width: 1,200 mm, total height: 2,060 mm, Weight: 2.000 kg Fpjdpfx Ajylvhgja Eod - Year: 1976 - Documentation available: No - CE certificate present: No - Serial number: 6720 - Drive system: Conventional - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 50 - Max. working width [mm]: 2050 - Column gap [mm]: 1600 - Backgauge depth [mm]: 700 - Crowning system: None - Punch holder: Fixed - Tools included: Yes - Transport dimensions: 2200mm x 1200mm x 2060mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, pressure 63 t throat ca. 280 mm Fodpfxexu Nw Sj Aa Eopd stroke 8-100 mm no. of strokes 60-130 Hub/min ram - range of adjustment 80 mm weight of the machine ca. 4,3 t Pressensicherheitssteuerung Pilz fehlerhaft!

Condition: new, For industrial production of rectangular briquettes The ZBP 500 compacts pressable materials into high-density briquettes. The briquettes are easy to store and, thanks to their stackability, can be transported efficiently. In the press chamber of the hydraulic press unit, the briquettes are shaped by a pressure cylinder. This allows up to nine briquettes per minute to be produced with a pressing force of 1 kg/cm². Fpjdpfx Aajyr I Hzo Eod Standard equipment:  Safety limit switches for oil temperature and oil level  Oil cooler  Automatic briquette length monitoring  Automatic hopper fill level monitoring  Control cabinet with PLC control for fully automatic operation Options:  Custom hopper extension available to meet customer requirements  Press stamp with inscription / logo

Condition: new, machine/vehicle number: AMIS Brikettierpressen Typ ZBP 50, 60 und 70, AT A GLANCE: Variable container dimensions (customizable to customer requirements) Left- or right-hand configuration Hydraulics with separate oil tank All model series also available as “DUO” variants Wood chips, sawdust, wood shavings, etc. are generated in all woodworking and industrial processing businesses. Every day, storage and transport costs for these materials are significant. Briquetting presses offer the ideal solution, as briquettes are easy and space-saving to store and transport. Additionally, the risk of spontaneous combustion is significantly reduced. Fpedpfoyr I Hujx Aa Eed Briquetting presses require little space, are robustly constructed, and equipped with low-maintenance technology. Whether wood, paper, biomass, foam, or polystyrene – the ZBP series briquettes any suitable material. With a throughput capacity of up to 35 – 130 kg/h, they are particularly suitable for small and medium-sized enterprises. Flexible installation options thanks to the availability of left- and right-hand designs. So start briquetting today!

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. Fsdpoyr I Hnjfx Aa Eepd The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: like new (used), functionality: fully functional, Year of construction: 2014, controller manufacturer: Amada, controller model: Amada AB-Pad, stroke length: 200 mm, number of axes: 4, Equipment: documentation/manual, Model: Amada HFE M2 100t 3m, 4-axis press brake Year of manufacture: 2014 Available immediately Press force (kN): 1000 Beam length (mm): 3110 Frame gap (mm): 2705 Throat depth (mm): 420 Standard stroke (mm): 200 Standard open height (mm): 470 Beam width (mm): 60 Table height (mm): 960 Approach speed (mm/s): 1-100 Bending speed (mm/s): 1-10 Return speed (mm/s): 1-100 Number of controlled axes: 4 Fpsdpfx Asynbfvsa Ejd Length (mm): 4580 Depth (mm): 2450 Height (mm): 2685 Weight (kg): 6900 Safety device: AKAS type, additional pair of back gauge fingers Support arm for hanging, height adjustable with 2 lateral stops Hanging element for support arm and table, suitable for HFE-M2 series

Year of construction: 1987, condition: good (used), 1 used die-cutting and embossing platen with additional automatic feeder Rabolini Imperia Gold, year of manufacture 1987 Fedpfjyttuajx Aa Eepd

Condition: good (used), Year of construction: 2012, Labeling systems, Lombardi Goldline Die-cutting, embossing, and rotary processing Fpjdpfx Ajytttioa Ejd

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Baler Paal Konti 200 D, Year of manufacture 2000 Technical specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Fpedpfx Aaox Tflfj Esd Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, length variable Tying: fully automatic, 4-fold Throughput rate at: 35 kg/m³: approx. 9.5 t/h 60 kg/m³: approx. 16.5 t/h 100 kg/m³: approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: paper, cardboard, film The baler is in good condition and has been checked and tested. A demonstration video is available on our website or YouTube channel. Complete documentation is available. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by prior arrangement. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: ready for operation (used), Year of construction: 1998, General Data Machine weight 16500 kg Control Unit Brand SIEMENS This BURKLE BTF 1628 laminating press was manufactured in 1998. It features a max panel size of 1250x2550 mm, panel thickness range of 6-35 mm, and a heating plate dimension of 1600x2800 mm. Equipped with a Siemens control system and a total power requirement of 38 kW. Consider the opportunity to buy this BURKLE BTF 1628 laminating press. Contact us for more information. Fpedpfx Aasx D Ifmo Ejd Application Types Pressing / Laminating

Condition: ready for operation (used), Year of construction: 2003, This F&O 03035 laminating press was manufactured in 2003. It features a working width of 1300 mm and a melting unit capacity of 200 kg. The outfeed roller conveyor is approximately 9000 mm long. In 2024, the infeed conveyor was upgraded with 4 brushes and radiant heaters. Consider the opportunity to buy this F&O 03035 laminating press. Contact us for more information. Application Types Fpsdpfxsx Tkazj Aa Ejd Pressing / Laminating