Used Range-Press for sale (26,433)

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 Nedpfoyz Dgwjx Ag Tswh throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: used, pressure 110 t throat 290 mm stroke 20-124 mm no. of strokes 60 / 90 Hub/min ram adjustment 85 mm table surface area ca. 920 x 590 mm ram surface ca. 530 x 280 mm distance table to upper part of the press ca. 450 mm Nedpfx Agot Ei Hns Tewh hole in the table ca. 180 x 300 mm mm table height ca. 750 mm tool hole in ram Ø 50 mm Number of working hours 8214 h distance table to upper part of the press mm weight of the machine ca. 5,5 t dimensions ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control

Year of construction: 1980, operating hours: 7,663 h, condition: used, pressure 320 t throat 800 mm stroke 630 mm distance between table / ram max. 1000 mm ram head dimension 710 x 600 mm table-size 800 x 1200 mm work height max. 1015 mm quantity of oil 1100 l Number of working hours 7663 h weight of the machine ca. 15 t dimensions ca. 1600 x 2200 x 4800 mm dimensions of switch cabinet ca. 1200 x 400 x 1800 mm Tested for function. During the test run it is noticed that the press ram not 100% leak-proof. In addition, the cable for manual operation was mended several times. Nwodpfjd Ih Nrex Ag Toh Upper cover is missing, since this was dismantled by the customer due to crane use. Operating instructions and electrical plans available.

Year of construction: 1978, condition: used, pressure 2000 /1000* t distance between columns 2650 mm stroke 500 mm column travel -side 500 x 1000 mm diameter of piston 710 mm number of pistons 2 distance between table / ram 1000 mm operating pressure 130 / 230 bar dayligth 800 mm table length 2500 mm table width 1600 mm table height 250 mm draw back pressure 500 kN number of T-slots 8 turning speeds 1500 U/min rapid speed 120 - 140 mm/min closing speed max. 120 - 140 mm/sec. return of plunger by small single cylinders 100 - 110 mm/sec hydraulical ram locking Njdped Ih Ncsfx Ag Tewh cutting sound absorber 300 t die cushion capacity 200 t die cushion stroke 250 mm speed of die cushion 100 mm/sec frequency 50 Hz voltage 380 V quantity of oil 2000 l total power requirement 93 kW weight of the machine ca. 100 t dimensions of the machine ca. 5000 x 2500 x 7200 mm transport measurements ca. 6500 x 3750 x 2190 mm 1991 assembly of a die cushion, pressure reduction to 1000 tons reason: tools were only constructed to 1000 tons press has run in a perfect condition until disassembly. It was replaced by a press line. important for UVV: press has a hydraulic ram locking!

Condition: used, pressure 200 t distance between columns 1600 mm max. ram stroke 600 mm dayligth 900 mm table width 1600 mm table depth 1300 mm table height 1060 mm ram surface 1600 x 1300 mm T-slots Din 650 / 22H12 Nsdpfx Agjg S R Twe Tewh rapid traverse 400 mm/s return speed 325 mm/s pressing speed 42 mm/s bei 40% mm/sec pressing speed 20 mm/s bei 100% mm/sec die-cushion pressure 800 kN die cushion stroke 150 mm speed of die cushion auf 68/ ab 225 mm/s

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump Nwedpfx Agezdc A Ie Toh - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Press brake with 6-axis backgauge and CYBELEC control Serial No.: Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Nedoya Iaqopfx Ag Tjwh Throat depth: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm travel Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working traverse: 1-10 mm/s Y return: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8 axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, laterally movable (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 gauging points up to max. 1080 mm - Ram with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light barrier - Operation via electric foot switch and/or two-hand control panel - Hydraulic upper tool clamping (TRUMPF system) with 20 mm clamping slot - Tool holder for lower tool, height 160 mm x width 60 mm, with holder slot 14 x 23 mm - Tool system TRUMPF, without tools Space requirement (L x W x H): 0 x 2500 x 3400 mm Machine transport height: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Year of construction: 2013, total length: 3,050 mm, total width: 1,650 mm, total height: 2,350 mm, Colour: Grey Weight: 5.690 kg - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 7304138524 - Drive system: CNC - Control system brand: Durma - Power [kW]: 7.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 60 Nwsdszbhy Topfx Ag Toh - Max. working width [mm]: 2050 - Column gap [mm]: 1720 - Backgauge depth [mm]: 800 - Crowning system: Mechanical - Tools included: Yes - Options: Digital readout - Transport dimensions: 3050mm x 1650mm x 2350mm (l x w x h) - Transport weight [kg]: 5690kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Hand-operated spindle press, homemade, from a training center Nodpfx Aezcqmlog Tewh Pressing force: approx. 5-10 tons Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1995, Like-new pneumatic punch / stamping press from a training workshop, with a base frame. Punching force: 5 t Double strokes/min at max. stroke: 30 Stroke length: 40 mm Installation height: 240 mm Overhang: 110 mm Table size: 250 x 200 mm Operating pressure: 10 bar Dimensions L x W x H: 250 x 370 x 1450 mm Weight: approx. 100 kg Nwedpfx Agezcpv Ss Tsh Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Heidelberg GTO 52 Year of manufacture: 1983, total print count: 13.4 million, conventional dampening system (blanket), Plus version including numbering unit Inline coating system KVE 52 (for full and partial coating) Njdpfezgkb Asx Ag Towh UV drying system ADNOS 1UV46 (for curing UV inks and coatings)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Nodeyzy D Eepfx Ag Tjwh Throat Depth 420 mm Motor Power 7.5 kW

Condition: ready for operation (used), Jenny ERP-25 straightening press Technical data: 25 tons of straightening force, ram stroke 150 mm Series 86.545 Nwsdpfszfx Iuox Ag Teh Weight 1,300 kg Note: Fully functional, including straightening unit for shafts.

Condition: used, Flame heating device, Roland Groß + Söhne GmbH Ring burner for heating, for weld preheating, casting preheating, etc. Type 1 x 1" Ionization Manufacturer No. ALMA, Year of manufacture 03/20 Connection voltage: 230 volts Pe gas max.: 500 mbar Pe air max.: 10 bar Vgas max.: 30 Nm3/h Vair max.: 300 Nm3/h Includes 10 different flame ring nozzles - Flame monitoring, Hans Henning - Ring nozzle, foldable design consisting of 2 halves, inner diameter 310 mm, with hose quick-connect coupling and ignition system, diffuser on the end face Nedpfxodz Spws Ag Tjwh - Ring nozzle, foldable design consisting of 2 halves, inner diameter 400 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 490 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 500 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 590 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 690 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 800 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser on the end face - Ring nozzle, foldable design consisting of 2 halves, inner diameter 890 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, inner diameter 990 mm, with hose quick-connect coupling and ignition system, diffuser in the center - Ring nozzle, foldable design consisting of 2 halves, arc length 1500 mm, with hose quick-connect coupling and ignition system, diffuser in the center For heating pipes and containers. For heating steel to welding temperature. Ideal for repair welding and manufacturing of welded components made of fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high-velocity flame spraying. Heating with gas for thermal spraying.

Condition: used, Year of construction: 2003, Technical details: pressure: 58 t Njdpjzgvhujfx Ag Towh box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel *

Condition: used, Year of construction: 2005, Technical details: pressure: 58 t box depth: 1145 mm material: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen bottles Feed opening: L: 1145 x B: 600 mm voltage: 400V / 50 V / Hz total power requirement: 4,0 kW weight of the machine ca.: 2,6 t machine dimensions LxWxH: ca. 1,07 x 1,84 x 3,1 m Anwendung: Papier/Pappe/Kartonage/Plastik/Blechdosen/PET Flaschen platzsparende Recycling Lösung kompakte Bauart automatische Pressplattenrückführung, dadurch erhöhter Bedienkomfort Öffnung an der Vorderfront Tür horizontal verschiebbar ca. 600mm Presskammer/Ballengröße: LxBxH: 1000 x 600 x 600 mm (0,36 m³) Bindeeinheit Band- und/oder Drahtabbindung Bedienung über Schalttafel Nwedpfezgvhhsx Ag Toh *

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Nsdezcgh Eopfx Ag Towh Weight: approx. 115 kg For further dimensions see pictures

Condition: refurbished (used), MAE Hydraulic Press 25 Ton Details Manufacturer: MAE. Type: HY-S25. Condition: Refurbished. Nodezd Shfopfx Ag Tewh Specifications Press force: 25 tons Frame type: C-frame Drive: Hydraulic Stroke: approx. 400 mm Table surface: approx. 800 × 500 mm Motor power: approx. 5.5 kW Hydraulic tank capacity: approx. 140 liters Operation: Two-hand operation. Dimensions Length: approx. 950 mm. Width: approx. 1700 mm. Height: approx. 2900 mm. Weight: approx. 4000 kg.

Condition: used, working width: 3,500 mm, Hydraulic press brake Nwedpswucgijfx Ag Toh Manufacturer: HARTMANN, Model: AKP 30-35C Year of manufacture: 1994 Technical specifications Manufacturer: Hartmann Model: AKP 30-35C Year of manufacture: 1994 Capacity: 300 t Working length: 3500 mm Overrun distance: 4 mm Overrun time: 40 ms Safety distance: 64 mm Connected load: 30 kW Equipment • CYBELEC DNC 70 control system All information provided without guarantee. A demonstration under power can be arranged upon request. The company Hartmann is based in Germany (Frankfurt region). Today, Hartmann specializes in the repair and servicing of sheet metal processing machines.

Condition: reconditioned (used), functionality: fully functional, year of last overhaul: 2026, type of input current: three-phase, overall weight: 350 kg, input voltage: 400 V, total length: 500 mm, total width: 520 mm, total height: 1,200 mm, input frequency: 50 Hz, DGUV certified until: 08/2027, Dough divider and forming machine Record roll press Newly revised dividing head New stainless steel knife Connection: 400V, 16A CEE plug Dimensions: 520 x 500 x 1200 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Nwedpfxouav Itj Ag Tjh Option: ONLY AVAILABLE FROM US! New forming plate Delivery service Stainless steel platform Maintenance contract Training and commissioning You will find a large selection of roll presses only with us!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 08/2027, type of input current: three-phase, overall weight: 500 kg, year of last overhaul: 2025, Eberhardt Optimat S 4 Roll Press Nsdpfxoy Hwmhe Ag Tewh Stainless steel design Simple manual operation Stand-alone machine, dough divider and rounding machine Top-quality roll press with 3 rounding plates TAS system, 30-piece For round and square rolls DGUV V3 certified – available only from us Connection: 400 V, 16A CEE plug Used machine We have many other bakery machines in stock!

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 00026, overall weight: 400 kg, Specifications: 8 bar Nwjdpjwrp Iuofx Ag Tjh 24 V 80 kN 3 K 150 E The Arnold & Shinjo / Multipower Farger & Joosten C-Press is a powerful and versatile hydropneumatic riveting press, ideal for efficient and precise joining of components. Thanks to its robust design and reliable hydraulic technology, it allows for high force transmission in various riveting tasks, making it a valuable solution in manufacturing and assembly. The press stands out for its ease of use and flexibility, so it can be used in different production processes.

Condition: used, Year of construction: 2022, operating hours: 2,919 h, pressing force: 660 t, Equipment: CE marking, Standard equipment Machine - Closed machine frame - Press beam - Spherical bearing for the press beam with press beam inclination - Electro-hydraulic upper drive - Block hydraulics - Length measuring system (Y-axis) - Hydraulic oil filling (lifetime filling) - Oil cooler Crowning - Self-regulating crowning Back gauge - Back gauge finger (2 pieces) Control - Machine control T3500T Multi-Touch - Integrated TRUMPF technology data Data transfer - USB interface - RJ-45 network interface - Network capability - Remote support interface Operation - Control unit with foot switch Safety - CE marking and EC Machinery Directive - Standard safety device _____ Extended machine equipment Back gauge - 5-axis back gauge (X, Delta X, R, Z1 and Z2 axes) Tool clamping - Hydraulic TRUMPF upper and lower tool clamping Control - DXF import - 3D visualization for T3500T control Angle assistants - ACB Laser (Automatically Controlled Bending), manually adjustable Operation - Work area lighting, front and rear Material handling - 2 support consoles Nwedozfy Ayepfx Ag Tjh Safety - BendGuard

Condition: used, Year of construction: 1981, total length: 1,100 mm, total width: 1,800 mm, total height: 2,850 mm, Empty weight: 6.000 kg Nwsdpsxywkqefx Ag Teh - Year: 1981 - Documentation available: No - CE certificate present: No - Serial number: 10340 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 100 - Max. stroke [mm]: 160 - Table length [mm]: 630 - Table width [mm]: 550 - Ram length [mm]: 1100 - Transport dimensions: 1100mm x 1800mm x 2850mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,350 mm, total width: 2,550 mm, total height: 2,700 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press model: C-Frame press - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT Nwodox Ad Hkopfx Ag Tsh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum