Used Residual Ozone Destroyer for sale (1,095)

Condition: used, tank capacity: 18 l, GENERAL Construction type: upright Remarks: Diameter of lid opening approx. 180 mm; 1 screwed-on drain valve (inner diameter of pipe approx. 9 mm; hand lever of drain valve missing); this drain is not located at the lowest point of the vessel (see photos) Internal diameter: 270 mm Overall height: 550 mm Location: Bremen Volume: 18 liters Product-contact material: V2A 1.4301 (AISI304) Podpfxsyci Ars Afhsgg Condition: used Last application: cosmetics VESSEL Support type: stand ring EQUIPMENT Note: slight residues

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Crane lugs Design: vertical Remarks: Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo of the nameplate); minor dents in the insulation jacket; sheet metal incisions in the insulation (especially in the lower base) Pgjdpfx Afsyciy Rshog External diameter: 1,830 mm Internal diameter: 1,690 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 100 °C Max. permissible operating pressure: 4.0 bar Agitator: agitator flange Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Volume: 5,000 liters Double jacket volume: 58.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 2,100 mm Previous application: food industry TANK Max. permissible operating temperature: 100 °C Support type: feet Number of feet: 3 pcs. HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Manway / dome: in top head (DN 500) Outlet: 50 mm Note: slight residues MATERIAL PROPERTIES Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-center in top head

Condition: used, tank capacity: 1,000 l, GENERAL INFORMATION Construction: upright Remarks: Manhole diameter approx. 420 mm Internal diameter: 1,190 mm Total height: 2,550 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 1,000 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 950 mm Psdpfsycix Tex Afhogg Previous use: biochemistry TANK Max. permissible operating temperature: 200 °C Stand type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: in top head Outlet: 53 mm Note: slight residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: used, Year of construction: 2005, tank capacity: 1,085 l, GENERAL Features: crane lugs, control cabinet (without guarantee) Design: vertical Year of manufacture: 2005 Remarks: Welded stainless steel ring on the outside of the vessel (protrudes approx. 100 mm from the outer diameter (insulation)) Outside diameter: 1,130 mm Inside diameter: 990 mm Total height: 2,150 mm Heating/cooling: yes Insulation: yes Power: 1.1 kW Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.5 bar Top head: welded lid with hinged segment Pgedpfx Afoycixtehog Agitator: propeller type Location: Bremen Cylinder temperature control: double jacket Nameplate: Volume: 1,085 liters Double jacket volume: 17.0 liters Product-contact material: V4A 1.4401/04 (AISI 316) Condition: used Cylindrical height: 1,240 mm Previous use: biochemistry VESSEL Max. permissible operating temperature: 95 °C Base design: feet Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet: 48 mm Note: slight residues/adherences MATERIAL SPECIFICATIONS Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Voltage: 400 V Interference suppressor: Agitator arrangement: eccentric on top head Agitator features: speed control via control cabinet

Condition: used, tank capacity: 530 l, GENERAL Design: vertical Remarks: handhole DN 200 Internal diameter: 790 mm Total height: 1,850 mm Max. overpressure: 3.2 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 530 litres Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 850 mm Last application: biochemistry VESSEL Pgjdpfeycixajx Afhjg Max. permissible operating temperature: 100 °C Base design: feet Number of feet: 3 pcs EQUIPMENT Manhole / Dome: handhole Outlet: 48 mm Note: slight residues MATERIAL Feet material: stainless steel

Condition: used, tank capacity: 400 l, GENERAL Design: vertical Internal diameter: 990 mm Total height: 1,700 mm Location: Bremen Volume: 400 liters Product-contact material: V2A 1.4301 (AISI304) Pgodpfxsyciw Ne Afhjg Condition: used Cylindrical height: 480 mm Previous use: Biochemistry TANK Support type: height-adjustable legs Number of legs: 3 pcs EQUIPMENT Manhole / Dome: on the top head (Ø 430) Outlet: flange DN50 Note: slight residues MATERIAL SPECIFICATION Leg material: stainless steel

Condition: used, tank capacity: 715 l, GENERAL Equipment: Level indicator (without guarantee) Design: horizontal Remarks: 1 manhole with a 400 mm diameter in the front end Internal diameter: 790 mm Total height: 1,750 mm Total length: 2,100 mm Max. overpressure: 2.0 bar Pgjdpfxeyciwve Afheg Location: Bremen Nameplate: Volume: 715 litres Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical length: 1,230 mm Last application: Biochemistry TANK Max. permitted operating temperature: 200 °C Support type: feet Number of feet: 3 pcs EQUIPMENT Outlet: 43 mm Note: light residues, manhole cover plated MATERIAL SPECIFICATION Foot material: steel

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Pedoyamzaepfx Afhegg Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, Year of construction: 2018, machine/vehicle number: 519553, Central extraction system Höcker Polytechnik with rotary valve and/or dust bins.(Option: rotary valve instead of dust bins) Manufacturer: Höcker Polytechnik Type: Multistar JQ6/5 131/20717A Year of manufacture: 11/2018 Dust properties: Dust and chips Material throughput: Unknown Jet cleaning of filters Volume flow: Approx. 22,000 m³/h Disposal type: Open Clean air duct: Air recirculation Residual dust content: 0.1 mg/m³ based on dust. 1 piece Filter system, galvanized Pgjdpeya Idvefx Afhsg - Year of manufacture 11/2018 - Multistar JQ6/5 131/20717A - Filter area: approx. 131m² - Filter bags: 120 - Filter bag diameter: 170mm - Filter bag length: 2,070mm - Filter cleaning Air Jet, compressed air - Filter housing made of galvanized sheet steel - Inspection door, access ladder, standing platform - Tested pressure relief areas - Raw gas section as large expansion chamber - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, hot-dip galvanized. - Includes dry extinguishing line, C connection - *Optionally with 6 chip bins or large rotary valve*2 pieces Clean air fans DER 404/400/18.5-2 - Volume flow: 11,000 m³/h per fan - Directly driven fans - Galvanized sheet steel - Installed horizontally in Multistar series - Electrical power of each fan 18.5 kW - Total volume flow 22,000 m³/h - Total pressure increase: 4,600 Pa 1 piece Pipe components Air recirculation - Including galvanized ducts - Must be supplemented for a new location . 1 piece Control cabinet With PLC Siemens S7-1200 Dustproof sheet steel standard housing control cabinet as wall cabinet, built and completely wired, in accordance with VDE regulations 0100, 0113, and DIN 57113. The scope of delivery includes all components required for control components and the circuit igned for: · Jet cleaning control · Control of 2 fans · 6 automatic start-up of the fans when the machine starts · Pressure monitoring indicator light · 3 control butterfly valves · Rotary valve controlDimensions: - Length: 3,960 mm - Width: 3,380 mm - Height: 5,900 mm (may vary depending on equipment) Electrical connection value: - approx. 38 kW - 400 V/50 Hz - Control voltage 230 V AC/24 V DC Location at warehouse

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) Pgodpfx Aoycuflefhsg COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: used, mileage: 109,000 km, power: 132 kW (179.47 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, navigation system, For sale here is a well-maintained Opel Movano B L2-H2 featuring the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German specification vehicle * Regularly serviced * Euro 6d emissions standard * One previous owner Equipment: Panel van L2-H2 * Automatic transmission * Automatic climate control * Navigation system * Cruise control * Reversing camera * Rear parking sensors (PDC) * Tow bar * Suspension seat (driver) * Heated seats * Truck homologation * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * 3 seats * Central locking * And much more... Technical Data: Gross Vehicle Weight Rating: 3,500 kg * Unladen weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 2,500 kg Why choose us? * Attractive financing through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your used vehicle at fair conditions * Transit license plates (5-day/customs registration), usually same day * Airport or train station shuttle service All vehicles are professionally reconditioned and hygienically clean! Highlights: Interior and ventilation system disinfected by ozone treatment. Two-stage exterior polishing * Paint correction and smart repair where necessary All our vehicles have also undergone thorough maintenance. Naturally, this includes fresh fluids, filters, and all routine service work you shouldn’t have to worry about. Pedpfx Afsydudqshegg Optionally, we can present the vehicle at an independent testing organization or workshop of your choice. We appreciate your interest and are available around the clock for all your questions and needs. If you have any questions, comments, or specific requests, please don’t hesitate to contact us! More information and an insight into our business philosophy are available at Special Equipment: Storage compartment on dashboard, Navi 80 IntelliLink audio navigation system (DAB+), Edition package, rear parking aid incl. reversing camera, Driver Assistance Package 2, LED cargo area lighting, Wireless charging tray for smartphone, automatic climate control, 105L fuel tank, load compartment partition with window, smoker's package, tire repair kit, permanent rear view camera, sliding door right loading/passenger area with window, cab seats: heated driver’s seat, cab seats: suspension seat (driver’s side), rear entry step Additional equipment: Driver airbag, electr. adjustable and heated exterior mirrors, single tires on 2nd/rear axle, Side Wind Assist, 185A alternator, rear wing doors without glazing (180-degree opening angle), high roof H2, allowable total weight 3.5t, interior pollen filter, high-roof box body standard, body variant: vehicle length L2, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, model update, engine 2.3L – 132kW CDTI, wheelbase 3,682 mm, low emissions to Euro 6d-TEMP standard, Visibility Package, steel wheels 6.5x16, Start/Stop system, LED daytime running lights, allowable total weight 3.5t.

Condition: new, Year of construction: 2025, NEW MACHINE Equipment: 2 x nickel-plated air table 1000 x 1000 2 x HSS knives OPTIKNIFE knife changing device Tool kit 18.5" touch color display 6-month Polar warranty on replacement parts (excluding labor costs), valid from the date of installation, provided that installation and commissioning are carried out by Polar-trained specialists. Technica Data: Cutting width 1,370 mm Insertion depth 1,450 mm Max. insertion height 165 mm Safety pressing pressure 30 daN Pjdsxazbtjpfx Afhsgg Press pressure, min 150 daN Press pressure, max 5,500 daN Saddle speed return (0 - ...) 300 mm/sec Blade speed 45 cycles/min Residual cut, automatic, without cover plate 25 mm Residual cut, automatic, with cover plate

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material: Pgodpfxox D E Hbe Afheg

Condition: used, Year of construction: 2018, Executed according to FprEN 16770 Tested according to GS-HO-07 testing principles of BGHM Offline filter cleaning with automatic fire extinguishing system The dust extractor is a suction and filter unit for commercial use, designed for installation in the workplace. The dust extractor is suitable for capturing, conveying, and filtering dry wood, paper, or plastic chips and dusts from one or several processing machines. The unit is delivered fully assembled and ready for operation. Consisting of: - Pressure-resistant and pressure surge-resistant housing (>200 mbar) - Suction nozzle with non-return valve - Antistatic filter elements - Jet-pulse cleaning - High-performance radial fan with IE3 efficiency class three-phase motor (arranged on the clean air side) - Exhaust air silencer and air outlet grille - Control unit with CEE plug (phase inverter) - Automatic start control for up to 6 machines (activation via current coils or potential-free contacts possible) - Automatic filter cleaning with runtime addition Podpfx Aoyfp Srjfhogg - Integrated extinguishing system - Painted RAL 9006 Compressed air, prepared on site, must be supplied to the unit for cleaning (connection via NW7 coupling / 6 bar). A water pipe, provided on site, must be connected to the unit for the fire extinguishing system (connection via ½" union fitting, min. 0.5 bar). Technical data dust extractor: - Suction nozzle diameter: 355 mm - Residual dust content: < 0.1 mg/m³ (H3) - Filter area: 26 m² - Cleaning: Jet-pulse automatic with runtime addition (offline) - Volume flow: 10,000 m³/h - Standard application design nominal volume flow: 7,130 m³/h at 20 m/s at suction nozzle - Negative pressure: 3,000 Pa at suction nozzle at nominal volume flow - Sound pressure level: 72 dB(A) at 1 m away from the unit - Motor power: 15.0 kW - Motor data: 400 V / 50 Hz / 3000 min⁻¹ / IP54 - Dimensions (L x W x H): 3,500 x 900 x 2,400 mm - Weight: 1,020 kg SPÄNEX Briquetting Press Type SHB 70 RS Price: €15,000.00 Transport pipe 110 x 3.2 mm for SHB 70 RS Machine number briquetting press: 2570/2018 Intermediate hopper 1.2 m³ for attachment to the SMU 100 dust extractor, integrated rotary discharger with gear motor, opening for connection to a briquetting press or rotary valve, galvanized finish for stepless adjustment of fan performance to actual demand via variable adjustment of fan drive speed. The frequency converter increases system effectiveness, saves energy, and reduces wear on material and machinery. - Motor power: 15 kW - Integrated PID controller - Automatic energy optimization for maximum motor efficiency, even in partial load range - Integrated manual/automatic switch-over - Startup menu for quick parameterization - Integrated RFI filter according to EN 55011 - 1 B - Synchronization with already running motor - Device design: IP 55 1 pressure gauge for controlling the frequency converter and thus the power consumption depending on the open machine dampers, including connection hose to the pipework Dust extractor SMU control expansion kit BA, 1 pc, consisting of: - Slide valve control for up to 16 machines - 14 current coils - Multi-tone horn with beacon Rotary paddle bulk goods level indicator, 1 pc, in the intermediate hopper of the dust extractor, ATEX II ½ Ex tD A20/21 marking, to indicate maximum fill level and control a conveying system (system-specific) Storage location: Supplier

Condition: used, mileage: 265,905 km, power: 309 kW (420.12 HP), first registration: 10/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, parking heater, Stock No. 5674 Mercedes Benz 2642 Arocs with HIAB XR21S51 Hooklift / Container lengths up to 6.00 m / 6x4 / Hub Reduction Axles / 265,905 km ---- * Manufacturer: Mercedes Benz * Model: 2642 Arocs * Mileage: approx. 265,905 km * Transmission: Automatic (Powershift) * Gross Vehicle Weight: 26,000 kg * Unladen Weight (as per registration): 11,606 kg * Payload: 14,394 kg * Axle Configuration: 6x4 / Hub Reduction Axles * Wheelbase: 3.90 m * Suspension: Front leaf springs, rear air suspension * Tyres: 1st axle 385/65 R22.5 / 2nd & 3rd axles 315/80 R22.5 * Cab: M-Cab ClassicSpace / 2 seats * Colour: Grey * MOT (TÜV): 11/2025 * ABS / EBS / ASR * Power: 420 hp / Euro 6 * HIAB XR21S51 hooklift (year of manufacture: 2018) * Container lengths: 4.50 m to 6.00 m * Preparation for front snow plough * 1x 390-litre aluminium diesel tank, left side * 1x 60-litre AdBlue tank, left side * 1x toolbox, right side * 1x open mesh box, right side * 2nd & 3rd axles: continuous aluminium mudguards * 50 mm trailer coupling with air, electrical and hydraulic connections * LED work lights on the back of the cab * Additional LED reverse lights * Additional LED front lights * Beacons * Sun visor * Roof hatch * Window in cab rear wall * Driver's seat with seat heating * Electrically adjustable and heated mirrors * Electric windows * Radio (CD/AUX/Bluetooth) * Navigation system * Multifunction steering wheel * Air conditioning * Auxiliary heater * Rocking mode * Hill-start assist * Engine brake * Cruise control * Central locking with remote control * First owner German vehicle! German documents! One owner! Further equipment as per manufacturer: Front axle load 8.0 t, 2-line trailer brake, audio navigation system Bluetooth comfort, nearside exterior mirror with maneuvering position, air horn, reinforced cab suspension rear, cab: steel suspension, comfort, front suspension: 8.0 t, 3-leaf, 12-speed gearbox - Type: G 230-12, construction vehicle interior filter, additional fuel pre-filter, 390 ltr. aluminium fuel tank, left, air intake behind cab, programmable special module, beacons left/right, reinforced rear end cross member, cab seats: comfort driver's suspension seat, exterior sun visor, steel rims 11.75x22.5 (front axle), steel rims 9.00x22.5, exterior stowage flap left, additional 24V socket in passenger footwell, CB radio preparation, additional water heater. Emission standard EURO 6, ABS can be disabled, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, electrically adjustable and heated exterior mirrors, 170 Ah battery, rear axle differential lock, compressed air connection inside cab, steel air tanks, cab width: 2.30 m, movable cab entrance, hydraulic cab tilting device, ClassicSpace M-cab, cab floor with 170 mm engine tunnel, suspension: leaf/air, electric windows, tinted windscreen, 100 A alternator, urea tank (AdBlue): 60 ltr., manual sunroof (steel), rear axle pinion 233, 10.4 cm info display, interior pollen filter, body: tipper, unregulated steering power pump, 2-cylinder air compressor, heated air dryer, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, PTO MB 131-2c, chassis lowering without residual bellows pressure regulation, ramp mirror, residual heat utilisation. Psdpfexffk Nox Afhsgg

Condition: used, mileage: 920,642 km, power: 310 kW (421.48 HP), first registration: 11/2015, fuel type: diesel, empty load weight: 9,777 kg, maximum load weight: 16,223 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,600 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Year of construction: 2015, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, central locking, compressed air brake, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * Condition: see photos * BigSpace cab with 2 comfort beds and 2 seats * Body: curtainsider on BDF swap chassis * Load area: length 7,200 mm x width 2,500 mm x height 2,600 mm * Sliding curtains on both right and left sides * Rear portal doors 270° * Multilock * BDF swap frame suitable for 7.15 and 7.45 swap bodies * Adjustable underrun protection * Trailer coupling: Standard Ringfeder D40 * Trailer load: 30,000 kg * Gross combination weight: 44,000 kg * Trailer socket: 24V / 15-pin * Automatic climate control * Cool box / refrigerator Pgedpfxjxwdk Se Afhsg * Bi-Xenon headlights * Retarder * Lift axle * Audio-navigation system Bluetooth comfort * Single-tired trailing axle * Mercedes-Benz PowerShift transmission * 12-speed gearbox - Type: G 211-12 * Electric stand climate system * Driver assistance system: adaptive cruise control * Driver assistance system: Attention-Assist (fatigue detection sensor) * Driver assistance system: Active Brake Assist 3 * Driver assistance system: lane keeping assist * Driver assistance system: stability control assist * Sound system * Residual heat utilization * Cruise control * Electric window lifters * Fog lights with LED daytime running lights * Comfort central locking system * Remote-controlled central locking * Driver side airbag * Rear axle differential lock * Cab seats: comfort driver's air-suspension seat with seat heating * Cab seats: passenger function seat with armrest * Cab seats: folding driver's seat backrest * Cab: electro-hydraulic tilting mechanism * Flat cab floor * Air suspension (full air) * Compressed air connection in cab * Drawers under dashboard * Seat upholstery: velour * Additional thermal insulation * Work lights * Exterior mirrors electrically adjustable and heated * Electronic brake system (EPB) with ABS + ASR * Tinted windscreen * Fuel tank: 630 liters aluminium * AdBlue tank: 75 liters If a new TÜV inspection is required, we will be happy to provide a quotation from our partner workshops. Our offer generally does NOT include a new TÜV certificate, no new DGUV, no new SP, and no new UVV. Further trucks available on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods to avoid any misunderstandings regarding their condition or suitability. Inspections and evaluations are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We are not liable for errors or incorrect information in this offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 722,179 km, power: 316 kW (429.64 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 7,856 kg, maximum load weight: 10,144 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,550 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, airbag, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, * German vehicle * Condition: see photos * Cab: L StreamSpace with 2 beds & 2 seats * Retarder * Air conditioning * Cooling box / refrigerator * Auxiliary heater * 12-speed transmission - Type: G 211-12 * Mercedes-Benz PowerShift gearbox * Driver assistance system: Adaptive cruise control * Driver assistance system: Attention Assist (fatigue detection sensor) * Driver assistance system: Active Brake Assist 3 * Driver assistance system: Lane Keeping Assist * Driver assistance system: Stability control assist * Residual heat utilization * FleetBoard vehicle computer * Cruise control * Light and rain sensor * Electric windows * Fog lights with LED daytime running lights and cornering lights * Comfort locking system * Central locking with remote control * EURO 6 standard * Audio system: CD radio comfort (Bluetooth) * Driver’s airbag * Rear axle differential lock * Cab seats: Armrest for co-driver’s seat * Cab seats: Functional passenger seat * Cab seats: Comfort driver’s suspension seat * Cab seats: Foldable driver’s seat backrest * Roof air deflector (adjustable) and side deflectors * Suspension: Leaf / air suspension * Programmable special module * LED ambient lighting * Compressed air connection in cab * Drawers under dashboard * Seat upholstery: fabric * Additional thermal insulation * Work lights * Exterior mirrors electrically adjustable and heated * Passenger side exterior mirror with manoeuvring position * Electronic brake system (EPB) with ABS+ASR * Air horn * Tinted windscreen (with band filter) Podpfxsxtfyas Afhsgg * Urea tank (AdBlue): 75 L * Fuel tank: 390 L aluminium * Fuel tank: additional tank 430 L aluminium, right side * Regulated hydraulic steering pump * Engine brake * Disc brakes on front and rear axle * Electric sunroof * FleetBoard DispoPilot guide * Info display 12.7 cm with additional display * Driver assistance system: Predictive Powertrain Control (satellite-based cruise control with transmission program) If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to prevent any misunderstandings regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and configuration of the goods/vehicles. Subject to change, prior sale and errors.

Condition: used, mileage: 255,705 km, power: 350 kW (475.87 HP), first registration: 03/2017, fuel type: diesel, empty load weight: 14,375 kg, maximum load weight: 17,625 kg, overall weight: 32,000 kg, axle configuration: 8x4, wheelbase: 4,250 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * original ONLY 255,705 km * Condition, see photos * Body/structure: tipper * Three-way tipper from MOSER, type Tribox SL * Loading area: length = 5,500mm x width = 2,500mm x height = 1,000mm * Bordmatic * Axle configuration: 8x4/4 * Trailer coupling: Ringfeder tow coupling * Total train weight: 40,000 kg * Trailer brake 2 - line, connections on the left * Trailer socket 24V / 15-pin * Driver's cab: steel-sprung, comfort * Axle 1 & 2 steerable * Retarder * Driver's cab: hydraulic tipping device * Engine 12.8 ltr. - 350 kW R6 diesel (OM 471) * EURO 6 standard * Mercedes-Benz PowerShift gearshift * 12-speed gearbox - type: G 330-12 * Rear view camera * Air conditioning * Residual heat utilization * Cruise control * Light and rain sensor * Bed * Electric windows * Fog lights with LED daytime running lights and cornering lights * Comfort locking system * Central locking with remote control * Audio system: CD radio comfort (Bluetooth) * Differential lock rear axle * Rear axle crown gear 300 * Front axle straight * Seats in the driver's cab: Passenger function seat * Seats in the driver's cab: Driver's seat, comfort, suspension seat * Seats in the driver's cab: Driver's seat backrest foldable * Driver's cab: Movable driver's cab entrance * Driver's cab: M ClassicSpace * Suspension: Leaf / leaf * Rear window * Parametrizable special module * Compressed air connection in the driver's cab * Interior filter for construction vehicles * Circuit breakers * Seat cover / upholstery: fabric * ABS can be switched off * Step with handrail on the roof * Electric exterior mirrors. adjustable and heated * Outside mirror on the right with maneuvering position * Standard and DuoMatic brake connection * Electronic brake system (EPB) with ABS+ASR * Air horn * Fuel tank: 320 liters aluminum, left * Urea tank (AdBlue): 25 liters * Tinted windshield Pgodpfxevyky No Afhjg * Driver's cab width 2.30 m * Reinforced engine brake * Disc brakes with full protection * Disc brakes front and rear axle * Reinforced end cross member If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and inspection of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 109,000 km, power: 132 kW (179.47 HP), first registration: 10/2020, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,548 mm, total width: 2,070 mm, total height: 2,499 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, navigation system, For sale here is a well-maintained Opel Movano B L2-H2 equipped with the globally popular 2.3-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d emissions standard * 1 previous owner Features: Pgedjycpawspfx Afheg * Panel van L2-H2 * Automatic transmission * Automatic climate control * Navigation system * Cruise control * Rearview camera * Rear Park Distance Control (PDC) * Tow bar * Suspension seat, driver’s side * Seat heating * Truck registration * Heated exterior mirrors * Electric exterior mirrors * Electric windows * 3 seats * Central locking * and much more... Technical data: Permissible gross weight: 3,500 kg * Curb weight: 2,050 kg * Payload: 1,450 kg * Towing capacity: 2,500 kg Why are we the right choice? Attractive financing options via our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your used vehicle at fair conditions * Transit license plates (5-day / customs registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally reconditioned and hygienically clean! Highlights: Interior and ventilation system disinfection using ozone cleaning, 2-stage exterior polishing, and if necessary, paint correction and smart repair. All our vehicles have undergone thorough maintenance. Naturally, this includes new fluids, filters, and other required services, so you don’t have to worry about anything. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We look forward to your interest and are available around the clock to assist you fully. If you have questions, comments, or special requests, do not hesitate to contact us! More information and insights into our business philosophy can be found at Special equipment: Storage compartment on dashboard, audio/navigation system Navi 80 IntelliLink (DAB+), Edition package, rear parking sensors including rearview camera, Driver Assistance Package 2, cargo area LED lighting, wireless smartphone charging cradle, automatic climate control, 105-liter fuel tank, bulkhead with window, smoker package, tire repair kit, permanent rearview camera, right side sliding door (cargo/passenger compartment) with window, heated driver’s seat, driver’s suspension seat, rear step Further features: Driver airbag, electrically adjustable and heated exterior mirrors, single tires on 2nd/rear axle, Side Wind Assist, 185 A alternator, rear wing doors without glazing (opening angle 180°), high roof H2, permissible gross weight 3.5 t, interior filter: pollen filter, body/type: high cube standard van, body variant: vehicle length L2, body variant: high roof (H2), adjustable steering column (steering wheel), headlight range adjustment, model update, engine 2.3 L – 132 kW CDTI, wheelbase 3,682 mm, low emission according to Euro 6d-TEMP, Visibility Package, steel wheels 6.5x16, Start/Stop system, LED daytime running lights, permissible gross weight 3.5 t

Condition: used, mileage: 704,988 km, power: 375 kW (509.86 HP), first registration: 09/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 12/2025, brakes: retarder, color: grey, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mercedes Benz Actros 1851 LS 4x2 Hydraulic, Alloy Wheels Special features: Lockable overhead compartment above windscreen, axle load monitoring system, front axle load 8.0 t, driver side airbag, work lights on rear wall of cab (top), audio system: CD radio (Bluetooth), CB radio, aluminium air tanks, 2 air horns on cab roof, cab width: 2.50 m, cab with air suspension, tinted windscreen, top rear wall luggage rack, AdBlue tank: 75 l, rear axle crown wheel 485, 12.7 cm info display with secondary display, integrated rear section, fold-out table in door panel, automatic climate control, fuel tank: 630 l aluminium, cool box / refrigerator, aluminium wheels 11.75x22.5 (ALCOA Dura-Bright, front axle), aluminium wheels 9.00x22.5 (ALCOA Dura-Bright), air intake behind cab, mounting plate / fifth wheel plate 40 mm for fifth wheel coupling, reinforced engine brake, configurable special module, spare wheel, retarder, acoustic reverse warning (external alarm signal), low-maintenance fifth wheel coupling, drawers under door panel, driver’s seat: comfort air-suspended seat, external sun visor, 12V socket in passenger footwell, 24V / 25A socket in passenger footwell, preparation/switch for lift axle on trailer/semitrailer, additional insulation, transmission oil cooler Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 4, 24V / 15-pin trailer socket, work lights, exhaust outlet right side, electric and heated exterior mirrors, rear axle differential lock, medium air supply unit, driver-assist system: Attention Assist (fatigue detection), driver-assist system: Brake Assist (Active Brake Assist), lane departure warning system, cab: L StreamSpace, full air suspension (front/rear), aluminium front spring support, electric window lifters, 100A alternator, 12-speed gearbox, type: G 281-12, body/build: tractor unit, lower comfort bed, central locking system, communication interface, 3-piece mudguard, radiator grille, variable-assist steering pump, 2-stage air compressor, engine: 12.8 l - 375 kW inline 6-cylinder diesel (OM 471), engine compartment encapsulation, ramp mirror, residual heat utilization, disc brakes front and rear axles, seat cover/upholstery: fabric, passenger functional seat, foldable driver's seat backrest, voltage converter 24V/12V 10A, front spray protection, front axle stabilizer, external left storage flap, 24V socket in cab, tachograph / EC control device, door extension for cab, aerodynamically shaped underbody panel, front underrun protection, toll collection preparation, dropped front axle, regulated water pump, GVW 18.00 t, supplementary water heater Podpfx Aow Aka Tofhsgg For further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2025, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1450 kg traversing speed 200 m/min weight 5010 kg dimensions of the machine ca. 9450 x 2240 x 2520 mm Pedpfx Afewmwwmohogg Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min weight 4980 kg dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 12 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve 7. Bodor Lightning perforation technology Podpfx Aexv D T Refhegg 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 25 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: new, Year of construction: 2025, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 900 kg traversing speed 91 m/min dimensions of the machine ca. 5562 x 2270 x 2388 mm Laser cutting machine with manual shuttle table Configuration 1. BodorPower laser source 6 kW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Bodor servo motor and driver 6. Nitrogen control valve Pgjdpfxewh Ulqj Afhog 7. Bodor Lightning perforation technology 8. Automatic layout of residual material 9. 21.5-inch monitor with touch function 10. Automatic adjustment of cutting gas pressure 11. Active anti-collision function 12. Intelligent vibration protection 13. Anti-burn mineral casting 14. Bodor Mango® Ergonomic Remote Control 15. Gas-saving nozzles with stable flow 16. Intelligent maintenance reminder 17. WIFI internet connection 18. Water cooling 19. Extraction system 20. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 20 mm STAINLESS STEEL 18 mm ALUMINUM 14 mm OPTIONAL: LANTEK EXPERT II CUT software incl. post-processor

Condition: new, Year of construction: 2025, table length 4000 mm table width 2000 mm burner heads 1 Control CNC workpiece weight 2510 kg traversing speed 200 m/min dimensions of the machine ca. 11599 x 3380 x 2718 mm Laser cutting machine with automatic shuttle table Configuration 1. BodorPower laser source 12 kW 2. BodorGenius laser cutting head with autofocus Pgjdpfx Ajwh Ukyofhog 3. BodorThinker 3.0 control system 4. Bed made of tenon and mortise structure 5. Stretched aluminum portal 6. One-click fully automatic processing 7. Automatic layout of residual material 8. Edge detection and automatic zeroing of the focal length through intelligent detection 9. Bodor Lightning perforation technology 10. 21.5-inch monitor with touch function 11. Intelligent control of gas pressure 12. Automatic adjustment of cutting gas pressure 13. Bodor Mango® ergonomic remote control 14. Active anti-collision function 15. Intelligent vibration protection 16. Intelligent adjustment to overheating 17. Gas-saving nozzles with stable flow 18. Intelligent maintenance reminder 19. WIFI internet connection 20. Water cooling 21. Dust removal function 22. Safety light curtains 23. Extraction 24. Wear parts set CUTTING CAPACITY: STRUCTURAL STEEL 35 mm STAINLESS STEEL 35 mm ALUMINUM 20 mm

Condition: used, mileage: 495,000 km, power: 290 kW (394.29 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,600 mm, loading space volume: 88 m³, loading space length: 7,720 mm, loading space width: 2,490 mm, loading space height: 2,300 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Orten SafeServer body * DEKRA certified according to VDI 2700 ff and DIN EN 12642 Code XL * Beverage certificate * Keg beer certificate * Chemical certificate (IBC) * Waste paper certificate Pgjdpfoxmn Erex Afhjg * 2,500 kg Dhollandia tail lift * 4 rows of load securing rails * Medium-length cab with 1 bed * Liftable, steering trailing axle * Leaf/air suspension * Retarder * Air conditioning * Cruise control * Differential lock * Spoiler * Sun visor * Heated seat * Automatic transmission * Euro 6 * Bluetooth radio together with Tandem SafeServer trailer * GVWR 18,000 kg * Payload 12,945 kg * First registration 09/2015 * Cargo space dimensions: 7,720 x 2,490 x 2,300 mm * 2,500 kg Dhollandia tail lift * BPW axles * Disc brakes ---- Special equipment: Trailer brake 2-line, Audio system: CD radio (Bluetooth), Exhaust outlet down right, 220 Ah battery, Compressed air connection in cab, Suspension: front suspension 7.5 t, single leaf, Info display 10.4 cm with additional indicator, Fuel tank: 630 liters aluminum, Roof air deflector (lockable), Reinforced engine brake, Steering, liftable trailing axle, Retarder, Tail lift control switch, Reinforced rear cross member, Fleet management system interface, Cab seats: passenger seat with armrest, Cab seats: driver's comfort suspension seat, Cab seats: foldable driver seatback, External sun visor, Side window sun blind, Driver's door, 12V socket in passenger footwell, additional 24V socket in passenger footwell, Automatic daytime running lights, Additional thermal insulation, Additional heater (water) Further equipment: EURO 6 emission standard, Axle configuration: 6x2, Front axle load 7.5 t, 24V trailer socket / 15-pin, Antos, Exterior mirrors electrically adjustable and heated, Rear axle differential lock, Steel air reservoir, Medium compressed air unit, Driver assistance system: Lane departure warning, Cab: width 2.30 m, Cab: hydraulic tilting system, Cab: M ClassicSpace, Standard steel cab suspension, Cab floor with 320 mm engine tunnel, Leaf/air suspension, Electric windows, Tinted windscreen, 100 A alternator, 12-speed transmission - type: G 211-12, Urea (AdBlue) tank: 60 liters, Manual lifting roof (steel), Rear axle crown wheel 440, Body/chassis: chassis, Central locking system, Non-variable power steering pump, Front air intake, Two-stage air compressor, Engine 10.7 liters - 290 kW R6 diesel (OM 470), Engine compartment encapsulation, Single tires on trailing axle, Wheelbase 4,900 mm, Ramp mirror, Spare wheel, Residual heat utilization, Disc brakes front and rear axle, Seat cover/upholstery: fabric, Cab seats: multifunction passenger seat, Front mudguards, Front axle stabilizer, Additional stabilizer, rear/trailing axle, Cab 24V socket, Tachograph / EC control device, Aerodynamically shaped underbody panel, Front underrun protection, Toll system pre-equipment, Dropped front axle, Controlled water pump, Permissible total weight 25.00 t