Used Rima for sale (137)

Condition: used, Year of construction: 2001, Built in 2001 Fsdpfx Agjc Idi Re Rsga Size max 320 x 250 mm min 260 x 180 mm Pile height max 330 mm min 80 mm Infeed height max 890 mm min 860 mm Speed max 900 Pack./h

Condition: ready for operation (used), Year of construction: 2011, Built in 2011 Fsdod N D Npepfx Ag Roga

Condition: good (used), Year of construction: 2016, Built in: 2016 Fgodou R Rynjpfx Ag Rja Length: 1,600 mm Width: 1,000mm Height: 2,200 mm

Year of construction: 2004, condition: good (used), Year of Construction: 2004 Description: Transforms the shingled stream behind a web press into counted and compensated stacks for further processing or distribution. No. of products per layer / stack are easily programmable. Details as shown below. Speed: 90.000 cph (product permitting) min format product (head/foot x spine): 102 mm x 145 mm (4.00" x 5.75") max format product (head/foot x spine): 320 mm x 500 mm (12.63" x 19.68") max pagination: 48p Product orientation: Spine leading Fgjdpfx Aeh Ir E Eeg Rsa Low Infeed Infeed height (min/max in mm): 600-1200 mm Waste gate Stream Aligner / Jogger Single squeeze roller Laser Counter, model: Baumer Scatec-1 Upper bin height in mm: 210 mm Upper Bin with 3 forks Turntable with compression plates max Stack height in mm: 330 mm Servo turntable Pneumatic pusher Delivery Direction to the right Delivery height in mm: 876 mm (34.50“) Air Delivery Table included Over all length equipment: 2650-2950 mm Over all width equipment: ~700 mm Over all height equipment: ~1800-1950 mm Input Power: 3 kVA, 50/60 Hz, 3 ~ Air requirement: 170 l/min 5.5 bar (6 cfm 80 psi) Weight: 945 kg (2100 lb) Equipment at Helmstedt, airports: Hannover (~1 hr), Berlin (~2 hrs) Mechanical / electrical machine test possible Condition: cleaned & in working conditions

Year of construction: 2006, condition: good (used), Build in: 2002 - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting Fedpfjh Itu Esx Ag Rjga - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Condition: good (used), Year of construction: 2008, Refurbished: 2008 Fsdpfx Asqpgmceg Rsga Format: max 320 x 470 mm; min 133 x 152 mm Product thickness: max 96 pages 57 g/m² mm Stack height pre-stack basket: 127 mm Total stack height: 330 mm Infeed height: 470 - 1,146 mm Outfeed height: 876 mm Output: max 100,000 copies/h Equipment - Inlet with discharge - Double press - Infrared counter - Outfeed left - Outfeed conveyor

Condition: good (used), Year of construction: 2007, Machine number: 338552-10 Built in: 2007 Size: max 320 x 470x 64 mm; min 102 x 152 x 7 mm Pile height pre-loading cage: 127 mm Pile height total stack: 330 mm Fsdju R I Eujpfx Ag Roga Infeed height: 660 - 1.016 mm Speed: 15.000 c/h

Condition: good (used), Year of construction: 2003, Year of construction 2003 Fjdpfsu R Ulbsx Ag Roga Size: max. 320 x 320 mm min. 133 x 152 mm Pile height: Max. 330 mm Speed: max: max. 100,000 ex./h

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Speed max 18.000 c/h Pile height 235 mm Fgedpfjc Rntnsx Ag Rja Pile height pre-loading cage 124 mm

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Size min 102 x 152 x 7 mm Fgodpfxodyky Ts Ag Rsa max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Table height 876 mm

Condition: used, Size max 470 x 320 mm Weight 520 kg (approx.) Speed max 18.000 c/h Fedpfx Ajdrhpfeg Roga Equipment • - special: post code identification

Year of construction: 1998, condition: ready for operation (used), Built in 1998 Size min 102 x 152 x 7 mm max 320 x 470 x 64 mm Speed max up to 15.000 Prod./h Fgedpfx Asdykhmjg Rja Table height 876 mm

Year of construction: 2006, condition: used, RIMA RS 1012-s Compensating stacker Fedpfeyaq Ikox Ag Rsga short-term available

Condition: used, total width: 1,000 mm, total length: 2,500 mm, total height: 2,150 mm, Empty weight: 3.000 kg - Documentation available: No - CE certificate present: No - Serial number: 73101 - Drive system: Conventional - Power [kW]: 2.8 - X-axis travel [mm]: 1000 - Table length [mm]: 1700 - Table width [mm]: 770 - Drilling depth [mm]: 250 - Drilling capacity [mm]: 45 - Max. Reach [mm]: 1450 - Tool holder: MK5 - Min. spindle speed [rpm]: 60 - Max. spindle speed [rpm]: 2650 - Transport dimensions: 2500mm x 1000mm x 2150mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fodjytf Ryepfx Ag Rjga Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), * Brand: Triman * Surface: length 3000 mm, width 1800 mm - 4 decks * Driving: 4 pieces vibration motors of each 3,2 kW Fsdpeywml Iofx Ag Rega * Screen opening: [] 10-6-4-2 mm * Capacity: 0-2 mm 55 t/h * Incl.: steel construction and vibrating chute.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Fgedpfoywwrfjx Ag Rja Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average power: 200 W – 5000 W Peak power: Up to 6 kW Wavelength: 10.6 micrometers Beam quality factor (M²): < 2.4 (typically 2.1 to 2.3) Beam divergence: 1.5 mrad (half-angle) Output beam diameter: 15 mm 1/e², 21 mm full beam Fodjywwq Uspfx Ag Rjga Pulsed operation – pulse repetition rate: 0 – 2 kHz Pulse width: 250 microseconds, 70 µs resolution Alignment stability: +/- 150 µrad Operating conditions: • Ambient temperature (max): 40 °C • Ambient temperature (min): 10 °C • Relative humidity: < 95% (non-condensing) Diode laser: • Wavelength: 635 nm • Output power: < 1 mW — 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power consumption: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20 °C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total consumption: 20 – 70 SLPH (variable) Additional requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2 °C • Depending on shutter usage

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Fedpfx Ajmx Rrlsg Roga Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012

Condition: used, Dimensions (LxWxH): 1084x996x1782mm Brand: FRIMA (Rational) Model: FSCC WE 202 Type: Combi oven (steam / convection) Manufacture: Germany Protection rating: IPX5 Use: Professional kitchens (restaurant, hotel, canteen) 20 levels for GN 2/1 or 40 levels for GN 1/1 trays Production capacity: 300 to 500 meals/day Steam: 30°C – 130°C Hot air (convection): 30°C – 300°C Combined steam + hot air: 30°C – 300°C Voltage: 400V Power: 65.3kW Weight: 370kg Main functions - roasting - steaming - grilling - braising - baking / pastry - regeneration (finishing) Connections Water pressure: 150 – 600 kPa (1.5 – 6 bar) Water inlet: R 3/4 Smart features Fgodpfxoyu Id Es Ag Rja - SelfCookingControl system - Automatic cooking by food type - 5 fan speeds - Humidity control - Automatic cleaning - Core temperature probe - Cooking program memory

Condition: ready for operation (used), Year of construction: 2011, table width: 3,050 mm, total height: 3,005 mm, product length (max.): 8,388 mm, This 3-axis Prima Industrie Platino 1530 was manufactured in 2011. It features a working area of 3000 x 1500 mm and is equipped with a CO₂ laser with a power class of approximately 3000 W. The machine has a total length of about 8,388 mm and a width of approximately 3,050 mm. If you are looking to get high-quality laser cutting capabilities, consider the Prima Industrie Platino 1530 CO₂ laser cutting machine we have for sale. Contact us for further details. • Supply voltage: 400 V • Current: 53 A • Frequency: 50 Hz • Laser type: CO₂ laser • Laser power class: approx. 3000 W • Laser ON time: 56739 h • HV ON time: 52613 h • Beam ON time: 38740 h • Shutter open time: 39057 h • Shutter cycle counter: 226839 • Vacuum pump ON time: 56729 h • Vacuum pump oil change time counter: 718 h • Turbine ON time: 14118 h Fgodpfsynk A Rsx Ag Rea • Turbine maintenance time counter: 5157 h

Condition: ready for operation (used), Year of construction: 2017, operating hours: 18,924 h, laser power: 3,000 W, travel distance Z-axis: 150 mm, overall weight: 11,000 kg, number of axes: 3, This 3-axis Prima Power Platino 1530 was manufactured in 2017. It features a 3 kW CO₂ laser, a working area of 3000 × 1500 mm, and can handle mild steel up to 15 mm, stainless steel up to 8 mm, and aluminum up to 6 mm. It includes an automatic pallet changer and a CNC Touch Interface. If you are looking to get high-quality laser cutting capabilities, consider the Prima Power Platino 1530 machine we have for sale. Contact us for more information. Fgedpfsx D Nyxex Ag Rja • Working area (X × Y): 3000 × 1500 mm • Positioning accuracy: ±0.05 mm • Repeatability: ±0.03 mm • Drive system: CNC-controlled with brushless servo motors • Control unit: Prima Power CNC Touch Interface • Cooling: Water-cooled • Fume extraction system: Integrated • Total operating hours: 18,924 h Additional equipment • Automatic pallet changer

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Fgsdpfx Agexxkm Ne Roa Price on request.

Condition: excellent (used), used Abrasive belt, 75 mm wide, 2000 mm long Speed: 30–34 m/sec Fodpjyuyd Refx Ag Rsga Contact wheel D 200 mm Drive wheel D 200 mm Weight: 76 kg 400 V

Condition: ready for operation (used), Year of construction: 2016, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 27 / 16, overall weight: 1,500 kg, power: 2.2 kW (2.99 HP), space requirement height: 4,150 mm, space requirement length: 5,100 mm, space requirement width: 2,000 mm, The machine is easy to operate, highly efficient, and not only threshes leaves but also partially separates them from stems and classifies them. It delivers excellent processing results for mint, lemon balm, sage, thyme, oregano, and rosemary. The machine can be operated in two different modes: as a threshing and crushing machine or as a vibrating separator. This is a major advantage, as it allows two processing steps to be covered with one machine. Fedpfxjyl T Ane Ag Rega 1. Threshing and Crushing Operation To operate the REBLER LGU 304, a conveyor belt is required. The material is fed by a VARIO 608 conveyor belt into the threshing and crushing section, where the leaves are separated from the stems and the material is sorted into five different fractions. 2. Vibrating Separator Machine use for separation: The machine functions as a vibrating separator by simply changing the conveyor belt angle and feeding the material through the first opening. The machine is equipped with four sieves and enables classification of the processed material. Sieve changes are quick and easy. Sieve sizes: 17 sieves (12 mm, 10 mm, 8 mm, 6 mm, 5 mm, 3 mm, 2.5 mm, 2 mm, 0.8 mm, 0.5 mm, 0.3 mm, NLC 10x4, MLC 12x18/6, NLR 54x82/18, NLR 22x44.5/12, NLC 54x82/18 & LPC 20x40, NLC 15x24/8) and five additional PETERSON sieves for FS 3004 Technical Data LGU 304: Dimensions (L x W x H): 5,100 mm x 2,000 mm x 4,150 mm Sieve length: First, second, and third sieve: 2,800 mm; fourth sieve: 2,650 mm Sieve width: 950 mm Number of sieves: 4 Approximate machine weight: 1,000 kg Total electric motor power: 2.2 kW Voltage: 380 V Electronic control: 2.2 kW LG 304 LEAF REMOVER ADAPTER Electric motor power: 1.5 kW Infeed roller drives: 2 x 0.55 kW Voltage: ~ 380 V Inclination angle adjustment: Continuously between 20 and 40 degrees LGU Screening machine FS 3004 with threshing and rebbler section Individual components: - VARIO 608 conveyor belt with dosing hopper (infeed conveyor) - FS 3004 screening machine with sieves and vibration control - Threshing and rebbler section with PA drums for FS 3004 - TRIPLE 202 conveyor belt (discharge conveyors) - Control cabinet - Covers for FS 3004 VARIO 608 conveyor with feeder Year of manufacture conveyor: 2020 Year of manufacture LGU: 2016 If you have any questions or would like to arrange a viewing, we are available at any time. Shipping by freight forwarder is possible upon request.

Condition: used, overall dimensions 900x1450x1380 mm; 240 litres boiler capacity; Fodpfx Agjyx Sqxj Rsga power supply 400 V/3/50 Hz; power 16,5 kW; pressure 2,5 bar; 3 Insert baskets 1/3; weight 332 kg.