Used Ripper for sale (846)

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps - device for small format - device fo large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm Iijdpfx Aov N Ep Dsg Noh - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: excellent (used), functionality: fully functional, power: 130 kW (176.75 HP), overall weight: 16,200 kg, Year of construction: 2008, operating hours: 13,811 h, Equipment: cabin, New Holland Grader F156.6 A/6x6/Trimble EM 400/5-Tooth Rear Ripper • Manufacturer: New Holland Grader • Model: F156.6 A • Year of manufacture: 04/2008 • Operating hours: 13,811 h • Engine power: 130 kW / 177 hp • Drive configuration: 6x6 • Dual-sided automatic levelling • Engine: 6-cylinder • Max. torque: 680 Nm at 1,400 rpm • 5-tooth rear ripper Isdpfexlkkhox Ag Noih • Differential lock • Moldboard: 3.35 m • Front blade: CNH 2.45 m • Gross weight: 16,200 kg • Documentation available • German machine • Immediately ready for operation • This offer is subject to change and non-binding. - Subject to prior sale. - Errors and/or typos excepted. - Sale pursuant to our General Terms and Conditions.

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG DMC 1035 V Year of manufacture: 2010 Control: Siemens 840 D Shop Mill Power-on hours: 32,921 h Program run hours: 11,517 h TECHNICAL DATA Travel range X-axis (longitudinal): 1035 mm Y-axis (transverse): 560 mm Z-axis (vertical): 510 mm Table working area: 1200 x 560 mm 4 T-slots: H12/100 mm 1 alignment slot: 14 H7 mm Max. table load: 1000 kg Drive power (40/100% duty cycle): 13/9 kW Torque (40/10% duty cycle): 83/57 Nm Spindle speed range: 20 – 10,000 rpm Tool holder (DIN 69871-1): SK 40 A Feed rate range (X, Y, Z): up to 20,000 mm/min Rapid traverse (X, Y, Z): 25 m/min Tool changer with double gripper Chain magazine Magazine positions: 30 Max. tool diameter: 80/130 mm Max. tool length: 300 mm Max. tool weight: 6 kg Operating voltage: 400 V / 50 Hz Total connected load: 25 kVA Max. main fuse: 35 A Machine dimensions (W x D x H): 2.52 x 2.5 x 2.6 m Installation area: 6.9 x 5.4 m Machine weight: 4500 kg EQUIPMENT / ACCESSORIES - Chip and splash protection enclosure with sliding door, electrically safeguarded and workplace lighting - Automatic tool changer (double gripper/chain magazine) ATC 30 - Central lubrication Isdpfx Agewwt Nas Noih - Spindle lubrication - Heat exchanger (working spindle) - Coolant/lubricant filtration system, 600 l, 20 bar belt filter - ICS – internal coolant supply through the tool - Switching from coolant to compressed air blow-off - Rinsing gun - Rotating inspection window - Chip conveyor with coolant reservoir - Infrared probe TS 649 - Tool measurement TT 140 - Electrical cabinet cooling - 4-color signal tower - Mounting elements - Documentation Condition: Good, predominantly used for aluminum machining

Year of construction: 2015, condition: used, max. paper size 760 x 1060 mm min. Paper size 320 x 457 mm material thickness 0,2 - 0,6 mm Totalizer status approx. 1,2 million Incl. cooling device TechnoTrans Omega K250L (built in 2020) Format (portrait format) max.: 760 x 1060 mm Format (portrait format) min.: 320 x 457 mm Grammage range 0.2 - 0.6 mm Iijdpfx Agovuuvqe Neh Punching area (net): 740 x 1,050 mm Gripper edge: 15 mm Output format B1: 2,250 sheets/hour Output format B2: 2,750 sheets/hour

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Iisdpfx Agowv Hnms Njh Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1977, Bobst Autoplatine SP 1420 E - 600 T (1977) Year of manufacture: 1977 Speed: 5,000 sheets/hour Counter: 5 million Iisdpfxexfu Drs Ag Neh Size: max. 1420 x 1020 mm min. 700 x 500 mm Equipped with: • New gripper bar • New chains Available: immediately Location: Germany

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: 69611, Awex carton stripper with compressed air Iiedpfx Agjwl N Iho Nsh

Condition: used, Year of construction: 2013, x-travel 650 mm y-travel 600 mm z-travel 500 mm Control iTNC 530 Heidenhain turning speeds 18.000 U/min Iodpfjuwv Dljx Ag Njih power capacity - main spindel 10 / 15 kW tool taper HSK A 63 rotary table dia. 630 mm center bore 32 H7 Swivel range A: ° rotatable C: 360 ° max. table load 1.000 kg number of toolpositions 32 pos. tool taper HSK A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm max. tool length 300 mm max. tool weight 8 kg rapid traverse ( X / Y / Z ) 60 m/min Accelaration 10 m/s² feed power 8.500 N total power requirement 43 kVA weight of the machine ca. 9,5 t dimensions of the machine ca. 15 x 7,5 x 3,5 m 5 Axis - CNC Machining Center Universal HERMLE - C 30 U - 2x Hermle C 30 U Linear axes dynamic version 6-fold rotary union Blown air through the center of the spindle Automatic cabin door Rotating transparent window - 1x Kuka KR 180 R2900 prime 6 axes Load capacity: 180 kg Reach: 2,896 mm 66x spaces for workpiece pallets 2x changing places 1x turning station 8x gripper spaces - incl. 1x Schunk gripper - incl. 66x workpiece pallets - incl. 64x HSK 63 holders - incl. 20x collets Also available as a single machine Hermle C 30 U.

Year of construction: 2025, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: Iiedpfx Aew Et H Ieg Nsh • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Steel welded frame with two maintenance doors - left and right. Powder coated RAL 9002 • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows 10 operating system • Laser axis measurement incl. protocol • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • Powder coated RAL 9002, ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, pipe length (max.): 3,000 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm Integrated Tube Cutting Line – Standard Configuration The integrated tube cutting line is a fully automated system for the precise processing of tubes and profiles. It combines cutting, brushing/deburring, washing, drying, measuring, and stacking into one continuous process. All workpieces are 100% inspected within the line for length, inner and outer diameter, and defective parts are automatically sorted out. System Components Bundle loading magazine Tube separation unit Sawing unit Brushing and deburring machine Washing machine with dryer Length measurement control Outer and inner diameter inspection (Keyence sensors, measuring mandrels up to 500 mm) Stacking handling with magnetic gripper Safety devices (protective fence, light barriers, etc.) The bundle loading magazine is designed for tube lengths up to 9 m. The system allows for damage-free separation and positioning of the tubes. After cutting, the tubes are deburred, cleaned, dried, and automatically stacked for further transport. Main Technical Data Specification Value Overall length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Operating temperature 15 °C – 40 °C Relative humidity max. 90 % Connection Requirements Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Fuse protection: 200 A Power supply: 3 × 95 mm² + 1 × 50 mm² PEN (IEC 364-4-41 / VDE 0100 Part 410) Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry and filtered) Water: ¾" water connection for washing machine with dryer Filling volume: 1,400 l Tube Processing Parameters Parameter Value Max. bundle weight 5,000 kg Outer diameter range 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Raw material length 3,000–9,000 mm Cut lengths 150–3,000 mm Material Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Max. saw blade width 3 mm Measuring and Inspection Systems Length measurement: Keyence sensor with SPC evaluation Inner/outer diameter inspection: Measuring mandrels with force detection (1–100 N) Repeatability: ± 0.1 mm Data analysis: PC-based evaluation software including documentation Iisdpsxnim Tofx Ag Neh Performance Data Processing speed depends on tube diameter, length, and material Max. part weight per cut: 25 kg Machining accuracy: ± 0.05 mm + saw blade tolerance (max. ± 0.10 mm total) Max. stacking weight: 45 kg Positioning accuracy for stacking: 0.5 mm Corrosion Protection All machine and safety components are finished with a high-quality base coat. Machine color: RAL 5010 (Forster Blue) Safety guards: RAL 1003 (Signal Yellow) Special Features Fully automated workflow from bundle loading to sorted stacking SPC-controlled measurement and documentation system Carbide-compatible sawing technology High process reliability with integrated inspection and monitoring systems Compact design with excellent machining precision

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Iedswqz Hajpfx Ag Nsih Clamping units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1-axis: 70.00 mm R spindle travel X2-axis: 180.00 mm R spindle travel Z2-axis: 238.00 mm Tool slide Tool slide: Vertical linear slide Number of tool positions: 16.00 Number of tool positions slide 1: 6/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Travel X1-axis: 135.00 mm Travel Y1-axis: 260.00 mm Number of turning tools (L-spindle) X-/Y-unit: 2/2 (Use for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Turning tool motor: 0.5 kW / 0.5 kW Powered tools max. drill: 8.00 mm Turning tool motor max. drilling diameter: M6 Tool slide 2 Tool slide: Vertical linear slide Number of tool positions: 7.00 Number of tool positions slide 2: 3/4 Tool shank size: 16.00 mm Internal holder tool: Ø 20.00 mm Travel Y2-axis: 215.00 mm Machine dimensions Machine height: 1,670.00 mm Floor space (WxD): 2,320 mm×1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Among others: (list not exhaustive): Miyano BX-26S CNC lathe (year of manufacture: 2008) Tool holder (see photo of machine interior) Fire extinguishing system Control for high frequency spindle High frequency spindle Chip conveyor Oil mist separator Exact scope of supply as per photo series No guarantee is given for the correctness, completeness and up-to-dateness of the information.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871/A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Ijdsq Ixc Tspfx Ag Njih Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: ready for operation (used), Year of construction: 2019, A CNC 5-axis high-speed milling machine Maxiport Corporation is available. Travel X/Y/Z: 800mm/1010mm/650mm, speed: 20000rpm, torque: 120Nm, drive power: 35kW, tool holder: HSK-63, tool positions: 96, tool changer: double gripper, rotary table diameter: 800mm, weight: approx. 19000kg, control: Heidenhain TNC 640, operating hours: 6905h, running hours: 2215h. Including Heidenhain TS460, chip conveyor, Blum tool measurement, 50bar ICS with coolant system, Heidenhain KinematicsOpt with calibration sphere KKH250, extraction system Filtermist FX4002, and tool package. The machine has a defect that will be repaired before sale. Documentation available. An on-site inspection is possible. Iisdpfxjxn S Tcj Ag Nsh

Condition: used, overall weight: 48,000 kg, empty load weight: 11,980 kg, maximum load weight: 36,020 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 100 mm, first registration: 03/2008, suspension: air-lift, gearing type: other, total height: 137,000 mm, driver cabin: other, Equipment: ABS, crane, * German trailer * 1st hand * Condition see photos * Rolling crane Hiab 130 R * complete documentation/ crane book available * 2 hydraulic extensions * 6.50 m = 1,910 kg. * 4.90 m = 2,530 kg. * 3.30 m = 3,770 kg. * 5th + 6th control circuit * Gripper control * High control * Track width 1,300 mm * Hatz diesel drive engine * Type Silent Pack 2L41C * Kennis semi-trailer * Type TPD348 C-B * 36,020 kg. payload * Air suspension + raise/lower * 1st axle liftable * 2nd and 3rd axle forced steered * SAF axles * Disc brakes * Length 13.60 m x 2.50 m x 1.00 m * Large storage boxes * Wooden loading floor * Aluminum loading flaps 1.00 m * Removable aluminum stanchions * All-round lights * Working lights * GVW. 48,000 kg * Unladen weight 11,980 kg * Payload 36,020 kg. If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Reference: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Iisdpfx Ageq Abwws Neh Subject to alterations, prior sale and errors excepted. - .

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Iisdpjub Umqofx Ag Noh Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Iodjr Izhuspfx Ag Nsih Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis Isdju Hkb Rjpfx Ag Nsih AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2012, • Axes: 6 • Maximum payload: 180 kg • Reach: 2550 mm • Repeatability: ± 0.07 mm • Mechanical weight: approx. 1,310 kg • Maximum wrist torque: approx. 961 Nm • Protection rating: IP67 (entire robot) • Mounting: floor-mounted • Controller: IRC5 (single or dual cabinet) • Power supply: 200–600 V, 50/60 Hz • Power consumption (ISO-Cube): approx. 2.7 kW Machine/asset does not include any product-related tool/fixture or gripper (robot). Iiedpfx Aexgqfbjg Noh

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-STRUCTURE) Control and Motors: HEIDENHAIN TNC 640 digital contouring control HEIDENHAIN package (motors, measurement systems, and handwheel) IKZ: Internal coolant supply, 20 bar Isdpfx Ajxc Hphjg Neih Additional equipment: Tool changer with double gripper, 60 positions Double hinged belt chip conveyor (longitudinal), one at the front and one at the rear Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 measuring probe Only inquiries from Germany will be answered // Only inquiries from Germany will be processed

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Iodpfx Aexf Ur Ajg Neih Various manipulators available, see our webshop.

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Iiodpfoubamvex Ag Njh Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing On request - installment plan option Price: On request

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Iiedpfeuqc Ngox Ag Nsh Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Iiodpfx Agev Nwwaj Njh Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: used, Year of construction: 2019, Control Unit: R-30 iB Plus This robot was used as part of a complete automation system for loading and unloading in a machining line • Axes: 6 • Maximum payload (wrist): 165 kg • Reach: 2655 mm • Repeatability: ± 0.05 mm (ISO 9283) • Mechanical weight: approx. 1090 kg • Joint motion ranges: J1: ± 370° J2: ± 136° J3: ± 312° J4: ± 720° J5: ± 250° J6: ± 720° • Maximum axis speeds: J1: ~130°/s J2: ~115°/s J3: ~125°/s J4: ~180°/s J5: ~180°/s J6: ~260°/s Machine/asset does not include any product-related tool/fixture or gripper (robot). Iisdsxgqg Eepfx Ag Njh

Condition: used, TÜNKERS Pneumatic Punching Unit Iiodpfx Agjxf Uqxe Noh Pneumatic punching yoke, punching press, punching unit Year of manufacture: 2019 Model No.: 141-1040F Yoke No.: B-13-26/100 Pressing force: 4 tons (40 kN at 8 bar) Air connection: max. 8 bar Throat depth: 100 mm Yoke width: 60 mm Hole diameter: Ø 2-13 mm Hole diameter (installed punch): Ø 4 mm Die diameter (outer): Ø 22 mm - Stripper via Vulkollan polyurethane elastomer Dimensions (L x W x H): 280 x 110 x 480 mm Weight: 36 kg Very good condition