Used Teeth Bewel for sale (538)

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 012729, overall weight: 920 kg, tooth pitch: 45 mm, total height: 1,680 mm, coolant pump power: 210 W, grinding wheel diameter: 250 mm, input voltage: 400 V, spindle speed (max.): 2,600 rpm, input frequency: 50 Hz, ISELI SBW Automatic Bandsaw Blade Sharpening Machine – Used For Sale – ISELI SBW Automatic Bandsaw Blade Sharpener Used ISELI SBW automatic sharpening machine for bandsaw blades, suitable for sawmill and industrial applications. The machine was used in our sawmill exclusively for sharpening our own bandsaw blades and was fully operational and in regular use right up until the day it was disconnected. The machine is fitted with 3 interchangeable cams for different tooth shapes. Please note: The tooth pitch adjustment is no longer operational. The machine is currently set to a fixed 45 mm tooth pitch, which was the pitch used in our sawmill. Technical Specifications Manufacturer: ISELI & Co. AG, Switzerland Model: SBW – Wet Grinding Grinding motor: 0.75 kW Blodo Abaldspfx Adhop Driving motor: 0.30 kW Height adjustment motor: 0.37 kW Feed motor: 0.11 kW Cooling water pump: 0.21 kW Spray suction: 0.75 kW Tooth height: 6–25 mm Tooth pitch: Fixed at 45 mm (adjustment not operational) Rake angle: 5°–35° Blade width: 60–350 mm Blade length: 6,200–9,500 mm or 8,500–12,000 mm Sharpening speed: 20–40 teeth per minute (variable) Grinding wheel diameter: 200 or 250 mm (Borazon/CBN) Grinding wheel bore: 25 mm Grinding wheel widths: 6 / 10 / 12 / 13 mm Grinding spindle speed: 2,600 RPM Machine height: 1,680 mm Net weight: 875 kg without blade support / 920 kg with blade support Approximate export packing volume: 4.5 m³ Condition Used machine in working condition. Previously operated in a working sawmill for our own blade maintenance, rather than commercial sharpening. The machine has not been tested since disconnection. Important: Sold as a used machine with a fixed 45 mm tooth pitch. Three tooth-profile cams are installed. Available for inspection by arrangement. Please contact us for further information or additional photographs.

Condition: excellent (used), Year of construction: 2018, overall weight: 30,000 kg, Doppstadt DW 3060K Biopower Type F M Shaft Bledpfx Ao Ad N Rnodhsp - Year of manufacture: 2018 - Engine: MTU R61300 with 490 hp - AD BLUE - Weight: 30,000 kg - Remote control - Humidification system - Rear conveyor belt 7m - Over-band magnet - Track chassis - Central lubrication system - Limiter - Roller: M 3000mm x 800mm - Teeth: 124 The machine is in its original condition, not repainted, only workshop-reconditioned.

Condition: excellent (used), Year of construction: 2008, CNC machine for applying Stellite to the teeth of bandsaw blades / Type GPA200 Stellite application machine Bledpjz Hdqbsfx Adhop Technical data for bandsaw blades: Blade width: 80 - 360 mm Blade length: 6 - 18 m Blade width: 35 - 100 mm Blade thickness: > 0.6 mm Technical data for frame saw blades: Blade width: 80 - 200 mm Blade thickness: > 1.6 mm Tooth pitch length: < 1700 mm Technical data for mini frame saws: Blade width: > 35 mm Blade thickness: > 0.5 mm Tooth pitch length: < 700 mm Rake angle: 10 - 40° External compressed air supply: < 6 bar Stellite diameter: 0.76 - 4 mm Working speed in teeth/minute: < 10 teeth/min Welding unit - large burner Current: < 150A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 1.5 - 2 l/min, shielding gas flow rate: 5 - 8 l/min Welding unit - small burner Current: < 120A, operating mode: Mono-gas/Bi-gas, plasma gas flow rate: 0.2 - 0.6 l/min, shielding gas flow rate: 2 - 4 l/min Additional slider

Condition: excellent (used), functionality: fully functional, power: 60 kW (81.58 HP), Year of construction: 1988, operating hours: 3,500 h, * 3,500 hours * Caterpillar engine 3204 (60 kW) * Operating weight 11,000 kg * Bucket with teeth 1.15 m³ * Immediately ready for use Bsdpfjxz Alcjx Adholp

Condition: new, functionality: fully functional, Year of construction: 2025, A double teeth roller crusher is a type of roller crusher commonly used in industries that involve the crushing of various materials, such as mining, metallurgy, building materials, and chemical processing. This crusher is characterized by its two pairs of closely spaced, parallel, and oppositely rotating rolls with "teeth" or "knurling" on their surfaces. The teeth are designed to grab and crush the material, providing efficient and uniform size reduction. Here are key features and aspects of double teeth roller crusher equipment: 1. Double Roller Design: - The crusher features two parallel, counter-rotating rollers, each with a set of teeth or knurling on its surface. The dual roller design facilitates a consistent and efficient crushing process. 2. Teeth Configuration: - The teeth on the rollers are designed to grip and crush the material. The arrangement and shape of the teeth may vary based on the specific application and the characteristics of the material being processed. 3. Adjustable Gap Settings: - The gap between the rollers can usually be adjusted to control the size of the crushed particles. This feature allows for customization of the final product size. 4. Material Feed and Discharge: - Material is typically fed into the top of the crusher and is crushed between the rotating rollers. The crushed material is discharged at the bottom of the machine. 5. High Efficiency: - Double teeth roller crushers are known for their high efficiency in crushing various materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 6. Versatility: - These crushers are versatile and can be used for various materials, including coal, limestone, slag, clay, and other similar materials. Bljdjq Nga Uopfx Adhsp 7. Application in Mining and Processing: - Double teeth roller crushers are commonly used in the mining industry for the crushing of minerals and ores. They are also utilized in other industries for size reduction and processing of materials. 8. Dust and Noise Control: - Some double teeth roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. High Torque and Power: - A powerful motor and a robust drive system are essential components to drive the rotation of the rollers, providing the necessary torque and power for efficient crushing. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Application in Size Reduction: - Double teeth roller crushers are effective in size reduction and are suitable for applications where precise control over the final product size is crucial. It's important to note that the specific design, features, and applications of double teeth roller crushers can vary among different models and manufacturers. When selecting or using this type of equipment, it's advisable to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 3,200 h, functionality: fully functional, machine/vehicle number: 189, power: 310 kW (421.48 HP), fuel tank capacity: 500 l, TECHNICAL DETAILS Cutter drum with teeth: 30 Areas of application: Waste/Wood/Green waste MACHINE DETAILS Engine power: 310 kW (405 hp) Fuel tank capacity: 500 l Electrical system: 24 V Hydraulic connections: 35-80 l/min Permissible total weight: 27,000 kg Load capacity protection: Three-sided Operating hours: 3,200 h EQUIPMENT Overband magnet Shredder drum with 30 teeth Caterpillar engine Load-dependent system Centrally arranged lubrication strips 24 V electronic control with additional electric pump Complete radio remote control Large maintenance doors on the sides Service-friendly engine compartment Hydraulically reversible fan Folding hopper Service staircase Acoustic start-up warning Doppstadt telematics system Special shredder system size L 600/4 - 30 Z Additional hydraulic connections Blsdsym U E Hepfx Adhop Hydraulic drive Discharge conveyor Frame with overband magnet Magnet and combs

Condition: new, This is a brand new binder, supplied in crate. The SpeedBind range of perfect binders meets the growing demand for professionally bound documents and books where quality presentation, quick turnaround, and ease of operation are essential. This SpeedBind 420 Pro offers the ability to produce A3/A4 Landscape/A4/A5 & A6 perfect bound books and documents. Key Features Colour touchscreen control for fast setup Adjustable spine clamping pressure and time Milling and notching spine preparation Combined spine and side gluing system Single glue tank for EVA adhesives Integrated paper dust extractor Fast warm-up time Output: up to 375–450 cycles per hour Padding mode for pad production Control System Operation is via an intuitive colour touchscreen control panel. All settings — including operation mode, glue temperature, clamp pressure, clamping time, and speed — are managed from the touchscreen. Setup is completed within seconds, ensuring consistent results across varying book sizes. Minimal operator training is required. Spine Preparation Spine preparation is performed using an extra-durable milling and notching disc equipped with: 20 milling teeth 2 notching blades Before glue application, the book block passes over the disc to break down paper fibres on the spine. This process allows superior glue penetration, improving binding strength and durability. Glue System The SpeedBind features a single glue tank for both spine and side gluing. Designed for modern high-strength EVA glues, it eliminates the need for separate adhesives, simplifying operation and maintenance. A tail structure stabilizes the glue layer on the spine before the book block meets the cover. Excess glue is removed automatically, ensuring precise application and clean, professional finishes. Clamping System The adjustable clamping station allows fine control of: Clamp pressure – prevents over- or under-clamping Bodpoy Dr Hdofx Adholp Clamping time – adjustable for different paper and cover materials This ensures a perfectly squared spine and consistently high-quality binding results. Dust Extraction An integrated paper dust extraction system is included as standard. During milling and notching, paper dust is collected in a cloth bag, reducing internal buildup and maintaining clean, reliable performance. Padding Mode In addition to book binding, the SpeedBind includes a padding mode for producing pads and similar products, increasing production flexibility. Specifications Manufacturer Glendale Model SpeedBind 420 Pro Condition New Stock Number 114909 Mode of operation Manual, automatic & fast Max spine length 420mm Sheet capacity 2-60mm Production speeds 375-450 per hour Control panel 7" Colour Touchscreen Milling & notching 20 milling teeth and 2 notching blades Side Glue Yes Adjustable clamp pressure Yes Adjustable clamp time Yes Warm up time 25 minutes Dust extractor Included Electrical requirements 220-240v 50Hz Weight 285kg Dimensions L1600mm x D590mm x H1100mm

Year of construction: 2008, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6560308, Refurbished Kirschner LK 700 soldering unit. Machine for fully automatic soldering of carbide/PCD teeth onto circular saw bodies. All relevant attachments are NEW and can be documented with an invoice. Bodpfezltitsx Adhslp The machine can currently be inspected while powered on.

Year of construction: 2022, operating hours: 2,500 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: OWD/492/2022, Equipment: CE marking, For sale is a used Metal Technika OWD-1600 4m optimizer with very low operating hours, approximately 2500 hours. The machine is connected and ready for trials and tests. Net price. TECHNICAL SPECIFICATIONS Performance From 3,200 to 8,250 m/8 hours. Electronics: Controller with a color touchscreen display "MITSHUBISHI". Functions - Full optimization of 30 dimensions in two quality classes, - Creation of cutting programs for different customers, - Cutting at the marked location using a fluorescent pencil, - Trimming the margin (beginning and end of the input material) - Cutting in batches (several pieces at once) - Meters counters: total, change, operator, monthly, Blodpfx Adjzdf Tpohjp - Cutting accuracy ±0.3 mm. Engine: 7.5 KW (saw Ø500 – 140 teeth) Width of input material 12 - 250 mm max. width/height (250 / 50 mm) Height of input material 12 - 120 mm max. height/width (120 / 120 mm) Length of input material up to 4,200 mm. Lubrication: Oil-based central lubrication system. Output automation Connection for a conveyor belt and a sorting table.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. Bjdpfxez Ikz Ao Adhelp The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: used, Year of construction: 1997, Equipment: all wheel drive, Very nice wheel loader – ideal for storage areas, etc. Bljdpfxoy U Szis Adhsp Bucket with teeth, approx. 2.3 cubic meters Weight approx. 12.5 tons With central lubrication system – interior and exterior in top condition! Bucket pivot point approx. 3.80 meters 6-cylinder engine 3-speed powershift transmission Tires approx. 70% good We can offer you transport to your location. Sale only to commercial businesses or for export. Sale as is, in the condition the machine is in. No guarantee or warranty. The mileage or operating hours stated are read from the odometer or hour meter; we do not guarantee the accuracy of this information! Subject to prior sale. The vehicle description does not constitute a binding offer, and the information provided should not be considered as guaranteed characteristics. The description and the information provided therein serve only for the general identification of the vehicle and do not constitute a guarantee in the legal sense of a purchase agreement. The information does not claim to be complete. The information/descriptions and images provided are non-binding and do not constitute guaranteed characteristics. Only the specifications in the order confirmation and invoice apply. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors. The seller has not inspected the machine. Equipment should be checked separately if necessary. We will also gladly accept your vehicle as a trade-in. For further questions, please do not hesitate to contact us. For our customers from abroad, we will prepare all customs and export documents for a trouble-free transfer abroad.

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm Bedpfxez Idb Ne Adhslp - Teeth: 24

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Blsdpjxx Tigsfx Adhsp Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: good (used), functionality: fully functional, Year of construction: 2010, We offer various excavator buckets and ditching buckets with the VERACHTERT CW30 CW40 quick-change system (56 cm between the "hooks"). Excavator size from 20 tons upwards. All buckets are in good condition. Blsdpfxjzuybbj Adhjp 1x Mass excavation bucket with teeth, 145 cm cutting width, 6 teeth CAT system, approx. 1.5 cubic meters. 1x Foundation bucket, 100 cm cutting width, 150 cm digging depth, smooth cutting edge, approx. 1 cubic meter. 1x Ditching bucket, humus bucket with hydraulic swivel motor! 210 cm cutting width, top-quality product from "Rädlinger". (The rock bucket with the 3 teeth shown in the picture has now been sold). Total price for all 3 buckets together, net: 3,500 + 2,500 + 5,500 = 11,500 euros. Collection in 96231 Bad Staffelstein / Upper Franconia / Northern Bavaria. Delivery is possible, subject to reimbursement of expenses. If you have any questions or require further information, please feel free to send us a message or call us. We also have a Verachtert sorting grapple and a power tilt with a HYDRAULIC Verachtert quick coupler for sale. Check out our other offers!

Condition: used, Sprockets, duplex sprocket, sprocket -Sprocket pitch: Duplex 1 1/2 "x 1" -Number of teeth: 25 teeth -Diameter: 318 mm Blodpfxod Tg Daj Adhsp -Total width: 100 mm -Tooth width: 24.1 mm -Inside diameter: 80/130 mm -Number: 25x sprockets available -Price: per piece -Weight: 33.5 kg -other sprockets: in stock

Condition: used, Year of construction: 2017, operating hours: 11,170 h, Attachment 1 (manufacturer, cutting width, etc.): Bucket with teeth and bottom blade, 3300 mm Automatic lubrication system -> Auto-lubrication system: Yes Bodpfx Ajz Si Ifodhjlp Service weight: 31000 Emissions class: Emissions Class 4 EPA certification: Yes Maximum speed: 40 Lift arm kinematics: Z-kinematics Air conditioning: Yes Engine: Liebherr D936 A 7 Rotating beacon: Yes Quick coupler: none Other extras?: Auxiliary heater Weighing system type: Pfreundt WK 50 XS, not calibrated Additional headlights: front + rear Condition of rear tires: 80% worn Condition of front tires: FL 100%, FR 80% worn Visual condition: used Technical condition: used ---- Tires: Goodyear TL-3A L3 26.5R25EM Lift arm (Z-kinematics): 3050 mm Programmable lifting and lowering automation Standard radio Air conditioning Automatic central lubrication system Includes bucket Location: Passau

Condition: used, Year of construction: 2023, New exhibition machine! List price €11,950 net • Equipped with a TERSA cutterhead for ultra-fast cutter blade changes • The TERSA cutterhead system enables particularly quiet operation • Helically toothed steel feed roller for consistent and uniform material feed • Material feed with two speeds via a separate motor • The particularly long planing tables facilitate easy and precise adjustment of the workpieces • Work tables are made of cast iron, annealed and stress-free, making them durable and permanently flat • Planing tables that open simultaneously towards the rear for short setup times • Planing table adjustment via handwheel with numerical display for planing height • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Material removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helically toothed feed roller (ideal for economical planing of hardwood) • Quality - Made in Europe Equipment details: Tersa cutterhead • No more adjusting and screwing required • Cutter blade changes in seconds • Self-locking • Particularly quiet operation The material feed • Helically toothed steel feed rollers for a consistent and uniform wood feed without leaving marks • Several teeth engage simultaneously for powerful feed • Wear-free compared to rubber feed rollers Fixed dust extraction hood • Thanks to the fixed dust extraction hood, there is no need to change the dust extraction hose when retooling • This saves valuable working time Simultaneous opening of the planing tables • Simultaneous tilting of the planing tables with spring support for quick and convenient adjustment for thickness planing in seconds Thickness table adjustment • FS 41 elite s with thickness table adjustment via handwheel with integrated display • The thickness table is mounted on four large-sized spindles, which ensure maximum stability under all working conditions. • Thanks to the special lifting device, the table position remains perfectly maintained even without locking. Anti-recoil guards • Massive anti-recoil guards prevent workpieces from recoiling • The 4-cutterhead ensures an optimal planing result Anodized aluminum planing fence • Large-sized (1200 x 150 mm) • Easy to move • Adjustable from 90° to 45° via a scale • Supplied as standard with an auxiliary fence for safe planing of even narrow workpieces Technical description - Planer Overall length of the tables 2200 mm - Planer Working width 410 mm - Planer Material removal max. 5 mm - Planer Dimensions of the planing fence 1200 x 150 mm - Thickness Dimensions of the thickness table 775 x 410 mm - Thickness Working height min. 3 mm - Thickness Working height max. 240 mm - Thickness Feed speeds 6 / 12 m/min - Cutterhead speed 5000 1/min - Cutterhead diameter 95 mm - Number of cutter blades 4 pcs. - Electrical connection 400V / 50Hz - Motor power 5.0 kW - Dimensions (L x W) 2250 x 1440 mm - Dust extraction port diameter 1 x 120 mm - Weight 450 kg Blodpfoz Ebprjx Adhop Storage location: Rieth

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, rotary table diameter: 900 mm, position of the milling head: Schwenkbar (35°), table diameter: 900 mm, total length: 6,000 mm, gear diameter: 1,200 mm, total height: 3,500 mm, total width: 3,900 mm, input frequency: 50 Hz, type of input current: three-phase, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 725 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 1,000 mm, overall weight: 24,000 kg, distance table to spindle center: 780 mm, tool diameter: 280 mm, controller manufacturer: LH90, control type: CNC control, Equipment: documentation/manual, rotational speed infinitely variable, A young Liebherr LC 1203 from the current LC generation: manufactured in 2009, with a motor milling spindle, capable of processing workpieces up to 1200 mm in diameter and weighing 9.5 tons, module 20 – the machine for large gears in gearbox manufacturing, wind power, mining, and heavy machinery construction. Serwema Retrofit Solutions, Chemnitz, optionally upgrades the machine to Siemens Sinumerik ONE, the latest control generation with full spare parts and support availability, and delivers it with a new, air-conditioned control cabinet manufactured in-house and a user-friendly interface. The mechanics remain in the well-maintained original condition with the original paint – a Liebherr from 2009 does not need a general overhaul, but a control system that will last for the next 20 years. Delivery time is six months from order. The machine mills spur and helical gears, as well as shafts up to module 20, in a reinforced version up to module 24, starting from a tooth count of 1 – including worm gears and special profiles. With 1000 mm of axial travel between the milling spindle axis and the table surface, long pinion shafts are securely clamped, and the 900 mm table supports 95 kN. The motor milling spindle rotates from 36 to 360 rpm, the milling head swivels by ±35°, and the tangential travel of 320 mm utilizes the full milling cutter length of 340 mm for long service life. Technical data: max. workpiece diameter 1200 mm, max. workpiece weight approx. 9.5 tons (table load 95 kN), table diameter 900 mm, distance between milling spindle axis and table axis 55–780 mm, distance between milling spindle axis and table surface 200–1200 mm, max. module 20/24, min. number of teeth 1, max. milling cutter diameter 280 mm, max. milling cutter length 340 mm, tangential travel 320 mm, milling cutter speed 36–360 rpm, max. table speed 12 rpm, swivel angle ±35°. Installation dimensions approx. 6.0 × 3.9 × 3.5 m, weight approx. 24 tons. Blsdoz E Hx Sepfx Adhsp Scope of delivery: optionally, a new Siemens Sinumerik ONE control system with Sinamics S120 drives, air-conditioned control cabinet manufactured in-house, user-friendly interface with Serwema gear cutting software, machine enclosure, magnetic chip conveyor, circulating and loss lubrication, hydraulic unit, coolant system, operating manual. Original color scheme. Acceptance in Chemnitz together with you; a mechanical overhaul or geometry inspection according to DIN is offered additionally upon request.

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Bodpfsz E Spcjx Adhelp Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: good (used), Sprocket, sprockets, single sprocket for roller chain, drive chain -Gear: 76 teeth -Sprocket pitch: 1" x 17.02 mm 16B-1 -Shaft mounting: Inner Ø 50 mm -Dimensions: see drawing in the photos -Number: 4x gears available Bodpfx Aeyn I Tgjdholp -Price: per piece -Overall dimensions: Ø 628 x 58 mm -Weight: 38 kg

Condition: refurbished (used), Year of construction: 2019, operating hours: 450 h, functionality: fully functional, type of input current: three-phase, total height: 2,836 mm, total width: 2,930 mm, total length: 2,500 mm, overall weight: 6,500 kg, empty load weight: 6,500 kg, Equipment: documentation/manual, Refurbished Optima 154 shredder. In very good condition - like new. Is a single shaft shredder of medium speed. Electric drive and hydraulic pendulum feeder, with low energy consumption. The pendulum feeder press the material against the rotor, equipped with fixed teeth that cut the material against anvil steels.
 The feeder, is operated by a last generation hydraulic system with proportional valve or hydraulic variable displacement axial piston pump.
 The process is set from software in the PLC. Key benefits: • Low electrical consumption. • Low dust and noise level. • Very simple maintenance. • It is not necessary with rotor cooling. Bljdpfxe Aarako Adhjp • Can process material down to 10mm in one step. • Technical availability from 96% to 98%. • Possibility to add water in the inlet. Shreds materials: 
 Industrial waste • Urban waste • Logs • Laminates • Bark • Wood waste • Paper • Craft • Plastic • Textiles. Is on a hook-lift platform, so easy to transport. New price Optima 154 shredder - aproximately euro 300 000,00

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 137, total width: 2,800 mm, total length: 700 mm, total height: 1,700 mm, type of input current: three-phase, Band saw blade grinding machine Risstaler riv Rivo 200 GA Year of manufacture 1984 Various tooth shapes can be selected Operating manual available Feed rate: 30 or 60 teeth per minute. Bljdsz Uq E Ajpfx Adhjp

Condition: ready for operation (used), Year of construction: 2020, operating hours: 6,056 h, spindle speed (max.): 3,600 rpm, total height: 2,135 mm, overall weight: 10,000 kg, controller manufacturer: SIEMENS, controller model: 840D, workpiece diameter (max.): 600 mm, number of slots in tool magazine: 12, This 3-axis horizontal turning machine manufactured in 2020 features a Siemens 840D control and a spindle speed up to 3,600 rpm. It offers a max turning diameter of 600 mm and a length of 2000 mm. Equipped with a chip conveyor, Siemens CELOS control system, and a fume extraction system, it's ideal for complex machining tasks. Consider the opportunity to buy this DMG MORI CTX 2000 horizontal turning machine. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Large number of turning holders for vdi 50 turrets, holders for hobbing gears, grooves, gear teeth, etc. , large block holder (sauter) for holding boring tools, driven angle milling attachment (mt), 2 × driven straight holders (ews). • Slide traverse x / ±y / z: 415 / ±75 / 2025 mm • Hydraulic oil capacity: approx. 40 l • Max pressure: 90 bar • Clamping device pressure (max): 10–70 bar Bljdpjx D Iv Esfx Adhjp • Coolant tank capacity: approx. 250 l • Pump power: 0. 85 kw • Pump nominal delivery at 5 bar: 20 l/min • Room temperature: +15 to +35 °c • Max relative air humidity: 75% Technical Machine Benefits • Ism102: 33 kw • Ism102plus: 40 kw torque (100% ed) • Ism102: 580 nm • Ism102plus: 1700 nm • Thrust (s6 - 40%): 9 / 9 / 13 kn • Max turning length: 2000 mm • Bar capacity: 102 mm • Clamping chuck diameter: 315 mm • Tool system: din 69880 (vdi 3425, page 2) • Tool shank diameter: 50 mm Extra Information Machine still under power. The machine is equipped with a fume extraction system, chip conveyor, Siemens CELOS control system with touchscreen, automatic tailstock, automatic steady rest unit, hydraulically clamping chuck, and increased coolant pressure through the tool spindle. Dimensions Machine Depth 5564 mm

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 like-new manual plate seat re-grinding machine, Petschauer PLT800, with a cutting-off device for repairing HM teeth on circular saw blades with a diameter of 100 to 800 mm. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding of the plate seat after unsoldering with a ceramic grinding wheel, 175 mm Ø and 4 mm wide, with an adjustment scale from 15° negative to 35° positive, with blade thickness adjustment. Left side: Cutting off teeth that are too long with a diamond cutting disc, 150 or 175 mm Ø, approximately 1 mm wide. Adjustment scale for back clearance angle, 15° negative to 35° positive. The cutting-off process is performed at a 0° axial angle. Additional applications: Setting the tooth back Setting the raker on CMT saw blades Breast grinding using a diamond grinding wheel Re-sharpening on the saw blade circumference at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Ø Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm, Depth: 72 cm, Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Ø Diamond cutting disc: 150 or 175 mm Ø Bljdpfx Aszz Rlksdhsp Operating voltage: 230/400 Volt, 3 phases, 50 Hz or 230/440 Volt, 3 phases, 60 Hz Protection: 3 slow-blow fuses, 10 A

Condition: used, functionality: fully functional, Maximum working diameter: 2100 mm Bjdpfx Adeylprfehjlp Table size: 1800 mm Minimum diameter: 200 mm Maximum number of teeth: 45 Max. module: 20 Weight: 40 tons