Used Rotary Harrow for sale (3,952)

Condition: used, Technical details: Lhedpou N Dz Aofx Ac Aoh table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: used, Technical details: table diameter: 950 mm table height: 300 mm rotation movement: 360 Grad Lhedpfswf Iuyox Ac Aeh table - tiltable: 50 Grad transport measurements machine: 1,0 x 1,0 x 0,4 m weight of the machine approx.: K.A. kg

Condition: used, Technical details: table diameter: 300 mm table height: 250 mm rotation movement: 360 Grad passage: 40 mm swivellable: einseitig 90° ° weight of the machine approx.: 126 kg Lsdpfx Aou Nknpsc Aehh dimensions LxWxH: 0,65 x 0,52 x 0,25 m basis stand area:380x330mm T-slots: according to DIN 650 und 508 T-slots 4x163mm length and 4x 135mm length - a=12mm - h=19mm - b=21mm - c=9mm *

Condition: used, Technical details: table length: 4000 mm table width: 4000 mm table load: 100 t table adjustment - longitudinal: U-Achse: 2000 mm Lsdpfx Aou N D Tlsc Ashh table rotating: B-Achse: 360 ° rapid traverse longitudinal: U-Achse: 6000 mm/min mm/min. rapid traverse:: B-Achse: 0,05 - 2 U/min U/min Rotary table The U and B axes are equipped with hydrostatic guides. Hydrostatic or bearing support : Hydrostatic support. Ø of the fifth wheel : 2.190 mm Hydraulic locks - 3 hydrostatic guideways for longitudinal movement - 1 hydrostatic circular guideway for the rotation axis Positioning system: - Heidenhain angle encoder for the B axis - Heidenhain optical scale for the U axis The servo motors, the control cabinet and a panel are not included in the scope of delivery. *

Condition: used, Technical details: Lhsdpexz E Exsfx Ac Ajh table load: 3 t table diameter: 1280 mm table rotating: 0-180 Grad table - inclinable: nein / no Grad machine weight approx.: 1,376 kg dimensions LxWxH: 1,4 x 1,7 x 0,18 m positioning rotary table Load capacity tested up to 3 tons. Currently operates in 2 positions at 180 degrees. Can be modified up to a maximum of 270°. *

Condition: used, Technical details: Lhjdpfx Asu N D Rqoc Ash table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250 mm table rotating: 360 ° table positioning: 4x90 ° feeds - longitudinal: 0,63 - 2.000 mm/U total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,82 x 2,25 x 0,92 m Rotary table conventional * Ljdpsu N D Szsfx Ac Ashh

Condition: used, Year of construction: 1975, Technical details: table diameter: 320 mm table height: 50 mm rotation movement: 360 Grad passage inside table: Ø 40 mm weight of the machine approx.: 73 kg space requirements of the machine approx.: L:0,63xB:0,53xH:0,14 m round table movement via manual wheel machine operation possible T-slot: 3x long and 1 x transverse - a=18mm - b=30mm - h=29mm - c=12mm Lsdpfx Aou Nkpmec Aohh *

Condition: used, Technical details: table length: 2000 mm table width: 1700 mm table load: 15 t x-travel: längs=3000 mm table rotating: 360 motorisch ° height over floor: 1020 mm total power requirement: ca. 1,0 kw weight of the machine ca.: 14,2 t dimensions: 5,7x2,1x1,0 m The boring mill table was built in 1985 and overhauled in 2023 (retrofit) Lhedpfx Aeu N D Sbsc Aoh The table is mounted on a flat bed guide (5000x1380mm). The axis of rotation (B) is mounted hydrostatically, 9x T-slots according to DIN 650 and 508: a=28mm; h=54mm; b=51mm; c=21mm whose center distance = 160mm B-axis as positioning axis, which is clamped. *

Condition: used, Technical details: weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,8 x 0,9 m Lhsdou N D S Uopfx Ac Ash Machine table with 5 indexing tables for multi-side machining Application: Multi-side machining of workpieces in circular transfer machines in one operation on 5 indexing tables with clamping devices. Design: Round, fixed body with 5 round tact tables, which are arranged in the shape of a pentagon, and a centrally mounted turntable. Description: Turntable center = type Pentagon, diagonal 830mm; swing diameter Ø 873mm, side length 513mm 5x rotary indexing table, as a regular pentagon on machine body, center circle Ø = 1280mm, table shape truncated square 380x380mm, clamping device via 4 pieces make Röhm truncated cone clamping devices and 1 central centering flange, 360 ° rotatable, workpiece Ø approx. 730mm Actuation / drive is hydraulic *

Condition: used, Technical details: table length: 2000 mm table width: 1800 mm table load: 12,5 t table adjustment - longitudinal: 1250/1400 mm table rotating: 360 motorisch ° table positioning: 4x90 ° Lsdpfx Acou N Ebdo Ashh feeds - longitudinal: 0,63 - 2.000 mm/min. height over floor: 920 mm voltage: 380 V total power requirement: 6 kW weight of the machine ca.: 7,6 t machine dimensions LxWxH: 3,8 x 2,25 x 0,95 m Rotary table conventional Bohrwerkstisch konventionell, Bedienung über Schalttafel T-Nuten nach DIN 650: a=28mm; h=49mm; b=52mm; c=21mm *

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position Lhsdorwq Uropfx Ac Ajh - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Technical details: Lhedpfx Acju N D Ayo Ajh table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *

Condition: used, Univ. Schwenk-Tilting-Rotary Table DECKEL Universal tool and milling machine mounting table, suitable for FP 2L, FP 3L or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm Lhjdjd E A I Nopfx Ac Aoh - 6 clamping slots, 16 mm, spacing 90 mm - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with a scale - Can be tilted +/- 15 degrees from/towards the machine - Can be swiveled +/- 15 degrees - Swiveling table, tilting table, angular table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Riveting machine, double riveting unit with rotary indexing table, DUNKES Type DN 4 Rotary table, rotary indexing table with SIEMENS control Machine No. P 81 - 5458, Year of manufacture 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Overhang 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Installation height, tool - counter-tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Mains connection 380 Volt, 50 Hz - Rotary table, indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit is adjustable within the machine frame relative to the rotary table Lhodedzp T Nepfx Ac Ash - Table size Ø 295 mm for holding round workpieces - Pneumatic riveting stroke - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Modernization of the control system and conversion of the servo drive in the rotary table in 2009 - New electrical control cabinet with Siemens Simatic Panel - Year of manufacture 2009 - Riveting time can be programmed continuously - Riveting pressure can be adjusted continuously via pressure gauge - Micrometer stop for limiting the stroke of the counter-rotating riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades with diameters of 400 to 2000 mm. The segments were manually placed on the support disc and fixed with straight rivets. The counter-rotating riveting unit rivets the shank simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair companies. Or for building a special-purpose machine.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total width: 770 mm, total height: 420 mm, overall weight: 300 kg, power: 3 kW (4.08 HP), type of input current: three-phase, motor manufacturer: Euronorm, Rotary Sieve Type KZ800 Available from stock: "Rotary Sieve 300" for all types of processes. Product inlet dimensions: 250x250mm. Sieve basket size: Ø 800 x 300 mm. The "Rotary Sieve 300" has been processed by "ViwateQ". The machine is fully welded both inside and out. For further questions or photos, please contact us! Lhodpfx Aoxtvnuec Ash A.J. van Velthuizen Metaalbewerking

Condition: used, machine/vehicle number: 161/93, Rye 40 SM Speedmax is a heavy-duty, automatic rotary shaper / rotary profile milling machine. It is designed for high-volume production and profiling of solid wood and wood-based components. The British manufacturer, Rye Machinery Limited, was a renowned supplier of specialized machinery for the furniture and joinery industries. Electrical Specifications • Supply Volts: 380 V AC (three-phase power supply) • Control Volts: 110 / 240 V AC • Auxiliary Volts: F-215 / A15-180 • Frequency: 50 Hz • Phases: 3 Lhsdpfxozfh Svs Ac Aoh • Full Load Current (F.L.C. Amps): 49.0 A • Machine No.: 181-93 • Wiring Diagram: A3-ER80/031 Technical and Functional Overview The Speedmax series of rotary shapers was engineered to minimize setup times and deliver maximum throughput for profiled components (e.g., chair parts, table tops, furniture fronts): • Rotary Table Design: Features a central, continuously rotating worktable. The operator can safely load and unload components on one side while the shaping heads machine the material on the opposite side. • Machining Heads: Equipped with pneumatic, heavy-duty shaping spindles that follow a master template to accurately reproduce complex, curved profiles. • Safety & Enclosure: The machine includes a comprehensive acoustic enclosure and safety guarding. This protects the operator from chips, dust, and moving spindles while significantly reducing workshop noise. • Dust Extraction: Outfitted with dedicated extraction hoods integrated near the work heads for efficient chip removal.

Condition: used, machine/vehicle number: 169/79, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). Ledpfx Acezfh Eio Ajhh - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, R80E MC is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England), manufactured in 1983 (serial number 112/83). Details of the R80E MC model Lhedpfx Acoyrn Rao Ash - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Year of manufacture: 1983 (112/83 – 112th machine in 1983 or December 1983). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Typical technical parameters R80/R80E - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: used, machine/vehicle number: 241/95, R80SM is a model of the rotary copy shaper (router-shaper) by Rye Machinery Ltd (High Wycombe, England) Details of the R80SM model - Machine type: Automatic rotary shaper with single or dual spindle for shape copying in furniture wood (shaper/copy router). - Application: Processing of furniture legs, frames, profiles – table rotation copies template onto the part. Lhjdpfx Ajyrphmsc Ash Typical technical parameters R80 - Rotary table diameter: approx. 1600 mm (as in similar model R80 SM Speedmax). - Motor power: approx. 5–7.5 kW per spindle, speed 6000–9000 rpm. - Tables: Hydraulically/pneumatically rotating, with clamping. - Lubrication: Exactly as on the nameplate – Shell/Telania grease daily at red points.

Condition: not inspected (used), YOM 1998, Hidenhein 430 .12000/1000/1450mm. 36000 kg Ljdpfezfw A Djx Ac Ashh

Condition: ready for operation (used), A complete Winema CNC rotary transfer production line including interlinking, peripherals and a washing system is available. 1) Winema RV20 Flexmaster rotary transfer machining center, stations: 6, machining positions: 12, max. material passage: 42mm, internal thread 1: M16x1.5, internal thread 2: M20x1.5, holes: 8.7mm/15mm/17mm/18mm, reaming: 9mm/15mm/18mm, cycle time: approx. 7s, throughput capacity: approx. 500parts/h, control system: Siemens Sinumerik 840D. 2) Winema bar loading magazine, tube support: 800mm, max. tube thickness: 2mm, max. bar length: 3200mm. 3) Knoll Turbofilter coolant cleaning system, dirty tank volume: 500l, clean tank volume: 150l, filter fineness: 50mm. 4) Knoll cooling unit, cooling capacity: 15kW, max. oil temperature: 30°C. 5) UAS oil mist extraction system, separation efficiency: 96%-98%. 6) Interlinked continuous washing system with automatic parts transfer. 7) Hydraulic system. 8) Conveyor units. 9) Fire extinguishing system. This is a complete and interlinked system for NC control valve production. The production of additional components can presumably be set up. Documentation available. An on-site inspection is possible. Ljdpfjzbl N Sex Ac Aehh

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused Ljdpfx Acey Tizdj Aohh

Condition: used, Year of construction: 1987, table length 1000 mm table width 1000 mm table load 1,5 t Lhodpfotqqkusx Ac Aeh flange diameter 700 mm turning speed max. 0,04 U/min weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing Lodoxf Uytspfx Ac Aehh - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg