Used Rotary Tilting for sale (7,241)

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. Ledpfx Ajx Dcdkofwshk This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility.

Condition: good (used), Similar in operation to Dohmeyer CryoRoll freezer. Packo developed these freezers to be used for high performance IQF freezing of small pieces of meat, seafood, cheese, pizza toppings, fruits and vegetables. The rotary drum is injected with CO2 down to -60 degrees C or nitrogen down to -110 degrees C. This unit was used in a cheese manufacturing facility which has recently closed, they were running shredded and diced cheese through the machine. We have a large quantity of conveying and machinery available from this facility. Ljdpfexz E Ndex Afwohk

Condition: like new (used), JBT Double D 2 rack rotary oven. Takes 2 x 18 x 30 racks. Very clean and tidy. For bakery use. Ledpfx Ajhyuchsfwjhk

Condition: good (used), This filling machine was filling 3 litre tubs of honey. It can be supplied at extra cost with a GlobeTech tub lidding machine which worked in line with it. Lhjdpfx Afspfdhpewjk

Condition: excellent (used), Year of construction: 2014, Rarely available for sale, GEA Comas Tartomatic 1000 in beautiful condition. Has not been used very much. Comes with many accessories as shown in the photographs. Lhodpfx Aevd Elnofwsk

Condition: good (used), Machine has been filling jams, honey, sweet mincemeat into plastic catering size tubs. Was then feeding into two separate lidding lines which can be available separately. Lsdpfsrdzbtsx Afwehk

Condition: good (used), Regal Trepko rotary pot filler and sealer. Was previously used in a UK factory packing dairy products like yoghurts, cream, sauces etc. Lodpfx Afopgqtzowjhk

Condition: good (used), Rotary pouch filler vacuum sealer. Was packing long life retorted meals in pouches for the armed forces. Ljdpfx Asyh Rczsfwjhk

Condition: excellent (used), Very nice 8 rack oven, perfect for cooking proteins. Direct from recently closed factory. Lhodpoqx A H Ajfx Afwsk

Condition: used, SPRB-SPRS Series 400 V three-phase power supply Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Dough capacity 250 kg Flour capacity 166 kg Bowl volume 390 L 2-speed spiral Spiral motor 6.5 / 11 kW Bowl motor 1.1 kW Automatic speed change Bowl rotation by pulses Bowl rotation direction reversal Hydraulic tilting Discharge into hopper or divider Stainless steel bowl Dimensions L × W × H 1800 × 1650 × 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Weight 1650 kg Year 2022 Used self-tilting dough mixer 160, capable of handling 250 kg of flour, SPRS250 General description The MECNOSUD SPRS250 is a large-capacity, self-tilting spiral dough mixer designed for bakeries, pastry shops, and production units that need to prepare up to 250 kg of dough per cycle. Its fixed 390-liter bowl can hold up to 166 kg of flour. This SPRS version is equipped with a hydraulic tilting mechanism that allows the dough to be discharged at height directly into the hopper of a divider or other production equipment. A mixer designed for large-scale production The SPRS250 combines a two-speed spiral, an independently motorized bowl, and two electronic timers. The operator can thus program the two phases of kneading separately, with an automatic transition from the first to the second speed. This arrangement facilitates the repeatability of recipes and limits interventions during the cycle. Key advantages Maximum dough capacity of 250 kg Up to 166 kg of flour Fixed 390-liter stainless steel bowl Two spiral speeds Two independent electronic timers Automatic transition between the two speeds Two independent motors for the bowl and the spiral Bowl rotation direction reversal Bowl rotation by pulses Hydraulic tilting, reducing manual handling Direct discharge into a hopper or divider Robust construction suitable for sustained production Detailed technical specifications Brand MECNOSUD Manufacturer's model SPRS250 Type of mixer Automatic spiral mixer with fixed bowl Discharge system Hydraulic tilting at height Maximum dough capacity 250 kg Maximum flour capacity 166 kg Bowl volume 390 L Spiral speeds 2 speeds Spiral motor power 6.5 / 11 kW Bowl motor power 1.1 kW according to the manufacturer Motorization Two independent motors Cycle management Two electronic timers Bowl rotation Continuous, by pulses and reversible Transmission V-belts Bowl High-strength stainless steel Spiral High-strength stainless steel Central column Stainless steel Protective grill Stainless steel Unladen weight Approximately 1,650 kg Dimensions at rest Approximately 1800 x 1650 x 1750 mm Loading height 1040 mm Unloading height 1930 mm Maximum height in tilting position 3100 mm Tilting footprint Approximately 2100 mm Data announced for this used unit Year 2022 Power supply 400 V three-phase Frequency 50-60 Hz Current 24.8 A Total power 11.4 kW Bowl capacity 84 L Discharge direction To the right Lhjdpfx Ajzqd Iqjfwok Type of controls Electromechanical

Condition: excellent (used), Year of construction: 2003, WELL-MAINTAINED MACHINE FROM A HOBBY WOODWORKING SHOP Table dimensions: 990 x 750 mm Router spindle diameter: 30 mm Router spindle speed: 3,700 / 6,500 / 7,890 RPM Diameter of router tool, max.: 230 mm Router spindle can be tilted: 0 - 45 degrees Router spindle height above table, max.: 120 mm Motor: 5.5 kW Router spindle can be switched for clockwise/counterclockwise rotation Sliding table with additional table support Additional extraction hood as a replacement for the fence, e.g., for sanding Hold-down device / safety system, e.g., when routing narrow parts Weight: approx. 540 kg Lsdpfx Afsznk Iljwehk Dust extraction connections: 1 x 120 mm, 1 x 80 mm Optionally available: 3-roller feed device FELDER F-34, item no. 4754

Condition: like new (used), Year of construction: 2025, Brand new MV600 vacuum tumblers available for immediate sale. Three available at the moment. Perfect machines for marinating meats, barbecue products, meat free products and mixing cereals, muesli etc. We also have smaller MV300 units in stock. Ljdpfoxvt Ikox Afwjhk

Condition: used, functionality: fully functional, Alfa Laval TJ20G Rotary Jet Head 316L Stainless Steel 1½" Jet head's were removed from process in 2023 and kept as spares. In good condition. Lhodpfx Afszlqnyowjk We have up to 8 of these available. Contact us for more information

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn Ledpfol Dn N Ssx Afwjhk

Year of construction: 2006, condition: good (used), Build in: 2002 Lhodpfx Afoh Itu Ejwek - Speed: up to 100.000 cph / 80 m/min (product permitting) - min width product: 101 mm - max width product: 530 mm - min length product: 114 mm - max height / thickness / pagination product: 2-64p(96p) - product permitting - infeed stream lap: ~25-100 mm - min width product: ~3 mm - max width product: ~50 mm - min product width after trim: ~95 mm - Trimmming line with 1st trimmer - right bump turn - 2nd trimmer - Infeed/delivery height: probably ~600 mm >>TBC - Trimming line - 1st trimmer knife left & right - Trimming line - 2nd trimmer knife right - To be used with carbide ring knives - Optional equipment: additional RS 220 bump turn, REF 25981.01, S/N 220-1137 - Over all length equipment: ~3500 mm - Over all width equipment: ~3000 mm - Over all height equipment: ~1181 mm ( infeed height~800 mm) - Input Power: ~13 kW - Voltage: 400 V, 3 Ph, N, PE, 50 Hz - Air requirement: practically no air requirement - Suction capacity per nozzle: 900 m3/h, air speed 31m/s - Weight: ~800 kg - Color: RAL 7035, light grey - Equipment at central warehouse Helmstedt with nearest airports: Hannover (~1 hr), - Mechanical / electrical machine test possible - Description: Right hand trimming line with 2 trimmers and a bump turn in between. For 3-side trim of products in a shingled stream. - Condition: cleaned & in working conditions - Machine available: upon request

Year of construction: 1986, condition: used, Standard features Lsdpfx Afsbi Uwfswjhk

Condition: good (used), Size: max 530 x 530 x 527 mm min 135 x 135 x 170 mm Product thickness: max 15 mm Cutting width: max 0-60 mm Ljdpfsd R Tgzsx Afwjhk Equipment: • infeed unit with degree bumbers • cutting unit • 1 st cut station RS 173/530 • 2 nd cut station RS 133/530 • bump turn 1530

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Lhodpfszpbrqox Afwsk Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Ledpfx Afjya Dtmswjhk

Year of construction: 1980, condition: reconditioned (used), Universal swiveling and tilting table for MAHO MH 1000 Lsdsfx Aipspfx Afwehk Clamping area: 1050 mm x 630 mm The universal swiveling and tilting table is in good condition!

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Lhodpfx Afszrl A Eewok Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Lhedju Tln Njpfx Afwjk Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Rotary table, manufacturer: Walter Type: RT 630 MP Heidenhain digital display Resolution: degrees-minutes-seconds Clamping surface diameter: 630 mm Height in horizontal position: 180 mm Height between centers in vertical position: 460 mm Motor: 400 volts, 1300 rpm Rotary table speed: 1.37 rpm Transport dimensions: Length: 1050 mm Width: 500 mm (with pallet: 800 mm) Height: 1220 mm Weight: 915 kg Lhsdpfxozk A U Ae Afwok

Year of construction: 2012, condition: ready for operation (used), Max. load: 2.5t, connected load: 4kW, weight: 1.477t. Lhsdpfx Aolyrz Isfwsk

Condition: ready for operation (used), Length: 8225mm, width: 3200mm, with documentation. Lhsdpfxji Ew Dpj Afwsk