Used Rotating Harrows for sale (6,726)

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Pgsdjykudkepfx Adlsk Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, Column lift turning device, 10-ton load capacity, available as a set or individually 2 sides powered Machine offered as a synchronized set or individually Protec turning device / positioner Syncrolift Double column, wireless and manual hand remote control Column adjustment electrically driven on both sides Load capacity 10,000 kg, 360° rotation Minimum working height: 800 mm Pgedpfx Adowtxxrelok Maximum working height: 1700 mm Speed: 0.5 rpm Clamping plate diameter: 900 mm Rotating drive: 2 x 2.2 kW Torque: 18,950 Nm Machine is also available individually as Mono model (more affordable) Optional with articulated flange (Cardan flange)

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 18,000 mm, mast type: telescopic, Year of construction: 2019, operating hours: 664 h, General Information Year of manufacture: 2019 Technical Details Number of cylinders: 4 Drive: Wheel Unladen weight: 14,300 kg Functionality Mast: Telescopic (3-section) Mast length: 18 m Lifting capacity: 4,000 kg CE certification: yes Condition Technical condition: very good Visual condition: very good DIECI PEGASUS 40.18 400 EX DEMO TELESCOPIC HANDLER YEAR OF MANUFACTURE: 2019 DRIVE: 4X4X4 MAX. LIFTING CAPACITY: 4,000 KG MAX LIFTING CAPACITY AT 15.3 METERS: 500 KG MAX WORKING HEIGHT: 18 METERS EXTRA HYDRAULIC FUNCTIONS 400° ROTATION TYRES: 405/70/20 2X JOYSTICK CONTROL 1X RADIO REMOTE CONTROL CE CERTIFICATE KUBOTA ENGINE TYPE: V3800-T 4 CYLINDERS 101 HP WATER COOLING MAX. DRIVING SPEED: 30 KM/H PALLET FORK HOOK TYPE: BUB 2448 OWN WEIGHT: 60 KG MAX. CAPACITY: 4,000 KG LARGE HYDRAULIC WINCH TYPE: BUD 4475 Pgedpouxrv Tofx Adlek OWN WEIGHT: 410 KG MAX. CAPACITY: 3,000 KG BUCKET VOLUME: 1.20 M3 ONLY 664 DEMO HOURS!!!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: good (used), fuel type: diesel, lifting height: 20,000 mm, mast type: telescopic, Year of construction: 2014, operating hours: 11,102 h, Year of manufacture: 2014 Drive: Wheel Unladen weight: 22,500 kg Mast: Telescopic (5 sections) Mast length: 20 m Lifting capacity: 8,000 kg CE marked: yes Technical condition: good Visual condition: good ENNEBOGEN 608 MULTI CRANE YEAR OF MANUFACTURE: 2014 91 kW 22,500 KG CE DEUTZ TCD2012L42V ENGINE HYDRAULICALLY TILTABLE CAB WITH AIR CONDITIONING 4X OUTRIGGERS MAXIMUM WORKING HEIGHT: 20 METERS MAXIMUM LIFTING CAPACITY: 8,000 KG MAXIMUM REACH: 2,300 CM WITH BOOM LARGE HYDRAULIC WINCH EXTRAS - TELESCOPIC JIB - HEAVY DUTY JIB - PALLET FORKS - BUCKET - HYDRAULICALLY OPERATED WORKING PLATFORM FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS, COMMERCIAL VEHICLES, AND MACHINERY FOR SALE. Pgodsvl S Sdepfx Adlok WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 20,800 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar Pgodpfx Aex Avycjdljk - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Condition: New machine Technical condition: New Front tires type: Air Podpfew Eqdksx Adljgk Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set 455/70 Michelin standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 5.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Pgedpfjw Eqdqjx Adlek Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: used, functionality: fully functional, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotatable Telehandler Mast Type: Telescopic Technical Condition: New Front Tires Type: Pneumatic Front Tires Condition: 80 - 100% Rear Tires Type: Pneumatic Pgsdpfxjw Eqdwo Adljk Rear Tires Condition: 80 - 100% Description: The vehicle is UVV-tested. A&M pallet fork carrier set includes 1200mm pallet forks, 1500mm pallet fork carrier plate, and 5t load hook. 3rd valve, 4th valve, heating, STVZO (German Road Traffic Licensing Regulations), full cab, CE certificate, PEGASUS 60.30 St.V TÜV/Dekra approval, 20 km/h axles for construction machines with automatic 45% differential lock on the second axle, additional platforms for outriggers, pair of LED headlights on the rigid boom, 7-pin socket on the upper carriage, car radio pre-installation kit with antenna and speakers, standard tool carrier plates, mechanically suspended Grammer seat with double joystick, right joystick with integrated front-wheel drive and electrical pre-installation for 3-motion equipment, wheel set with 18R22.5XF MICHELIN off-road tires, semi-automatic air conditioning, removable windshield protection for the cab, kit for driving with 180° upper carriage rotation, boom vibration damping, integrated rear view camera with 7-display (not compatible with 7-monitor with digital camera on the telescopic boom). Telematics kit (DTS) Road lights (front) with LED daytime running lights Cabin with laminated glass windscreen, pre-installation for saw Woodcracker Three-sided personnel basket 120x240cm, hydraulically extendable to 420 cm. Load capacity 300 kg Pallet fork carrier plate including load hook A&M, width 1, chain forks FEM4A, tines: 150x50, length 1.2 m, load capacity

Condition: good (used), Machine table Type: Turn-tilt and swivel table Origin: probably WMW or TOS milling machine Size: 800 x 240 mm Pgedova D Tiopfx Adlek Clamping surface: 700 x 240 mm Number of clamping grooves: 5 Clamping groove width: 12 / 20 mm Clamping groove depth: 13 / 22 mm Stop surface: 320 x 200 mm Features: can be rotated, tilted and swiveled Dimensions: 800 x 250 x 300 mm Weight: 67 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Ideal for separating ferrous impurities from granulates such as plastics and dry, free-flowing powders such as flour and sugar in free-fall conveying systems. We would be happy to carry out a test with your material to ensure that our product optimally meets your requirements. Pjdpfjuc S Ihsx Adljgk If you have any further questions, please do not hesitate to contact us.

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - höhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 - Max. travel speed 40 km/h Pjdpfexylvhsx Adlogk - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,170 mm, - Max. Tragkraft 6000 kg - höhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung Psdpfx Adox Szumologk - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: refurbished (used), Refurbished Duo 65 M. Very good condition. 1 year warranty. Price after Contact. Pgsdpfoix Nl Sox Adlek

Condition: used, functionality: fully functional, machine/vehicle number: 5576, Year of construction: 2019, operating hours: 3,500 h, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: telescopic, power: 116 kW (157.72 HP), fork length: 1,200 mm, drive type: Diesel, Rotating telehandler Chassis number: 5576 Mast type: telescopic Podoxbi Aujpfx Adlsgk Transmission: hydrostatic Speed class: 35 Condition: reconditioned without warranty Technical condition: very good Front tyres type: pneumatic Front tyres condition: 40 - 60% Rear tyres type: pneumatic Rear tyres condition: 40 - 60% Description: Available from February 2026 3rd valve, rear working lights, front working lights, windscreen, heater, STVZO, full cab, CE certificate, self-propelled, interior mirror, exterior mirror, joystick, beacon, windscreen wiper, seat.

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06L/9048, Offer Number: M06L/9048 Machinetype: rotating 3 - die header Pgodpsw Nxqlofx Adlok Make: HILGELAND Type: HC5-40A Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: M06I/9048, Offer Number: M06I/9048 Machinetype: rotating 3 - die header Make: HILGELAND Pgedpfx Asxcxzpodlsk Type: HC5-40A Constr. year: 1990 diameter range: 6 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 600 Location: Germany

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M06L/9056, Offer Number: M06L/9056 Machinetype: rotating 3 - die header Make: HILGELAND Type: HC5-70A Podpfx Adexcx Dkoljgk Constr. year: 2001 diameter range: 5 mm shaft length under head: 70 mm max. cut-off length: 88 mm output pieces/min: 500 Location: In our warehouse

Condition: new, Year of construction: 2025, Rotary filling machine to fill liquids, pastes, powder, bulk goods into pre-made cups and sealing them with film. The machine can be equipped with a module for capping the cups with a hard plastic/hard shell lid (at a surcharge). The AMTEC filling and sealing machine can handle different cup types, shapes and dimensions and is flexible in the type of product to be filled. The product must only have flow properties such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. Automatic operation from feeding of cups, filling, opening of cups, sealing with foil (capping with a lid, optional), collecting of cups / containers. The dosing unit (e.g. volumetric pump with an external tank, auger filler, etc.) is included. Easy operation due touch screen monitor. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; film type: suitable for sealable mono and composite films; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1100xW1100xH1983 mm; weight: approx. 800 kg. Pjdpfx Asv Nkzrsdlegk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic filling and sealing machine for filling cups or containers, sealing with foil and capping with a hard plastic/hard tray lid. The rotary filling machine is suitable for various product types from liquids, pastes and powder to granular bulk materials such as yoghurt, dessert, sour cream, finger food sauces, smoothies, solid and dry foods such as rice, nuts, cereals, instant noodles and fresh foods such as sauerkraut, etc. The dosing unit is selected accordingly. The Shape, dimensions and material of the cups and lids can be customized (within the range). Automatic operation from feeding of cups, filling, opening of cups, sealing with film, capping with a lid and outfeed of the cups / containers. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; filling volume: customized; cup/container dimensions: customized; number of filling heads: max. 2; product contact parts made from SUS 304; current: 220/380 V, 3kW; machine dimensions: approx. L1200xW1200xH2000 mm; weight: approx. 800 kg. Pgedpfjv Nkzlox Adlsk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic rotary cup or container filling system for liquids including dosing unit and sealing module for the lidding film. Suitable for products with flow characteristics, various container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Automatic operation from drop cup, filling to sealing. 2 cups / containers will be handled per cycle. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: filling capacity: customized; max. speed of the machine in neutral: 80 cycles/minute; power: 220V / 380V, 2kW; machine dimensions: L1100xW1100xH1600m; weight: approx. 400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pgsdpfxov Nkzfs Adlok

Condition: new, Year of construction: 2025, Automatic rotary cup or container filler. Suitable for different container sizes, shapes and materials. Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc. Automatic operation from cup feeding and filling, lid feeding and container closing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc. Touch screen for easy operation, stainless steel version, easy cleaning. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: max. speed of the machine in neutral: 16 cycles/minute; power: 380V, 50Hz, 4kW; compressed air and consumption: 6-8bar, 0,6m³/min; machine dimensions: L1000xW1000xH1650mm; weight: 350kg. Pedpov Nkx Rofx Adlsgk Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 8; max. speed of the machine in neutral: 20 cycles/minute; power: 220V, 1.5kw; compressed air: 0,1m³, 6bar; machine dimensions: L950xW870xH1600mm. Pgsdov Nkybopfx Adljk That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Automatic rotary cup or container filling system including film sealing module. - Suitable for different container sizes, shapes and materials (e.g. PP, PS, PET, Paper, laminated films, etc.). Perfect to pack instant food, noodles, pasta, dried fruit, snacks, candies, chocolate, soup powder, frozen food, yogurt, ice cream, jelly, etc.. Automatic operation from drop cup, filling to sealing. Suitable for all kind of (separate) dosing systems for liquids, pastes, granules, powder, etc.. Touch screen for easy operation, stainless steel version, easy cleaning. Print mark sensor. Customizable mould for container allows a wide range of sizes/shapes. - Specifications: number of working stations: 12; max. speed of the machine in neutral: 20 cycles/minute; power: 220V, 2.1kW; compressed air: 0,1m³, 6bar; machine dimensions: L900xW850xH1600mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Pgsdpov Nkyhofx Adlsk

Condition: new, Year of construction: 2025, New model Auto Rotary Plastic Container Feeding, Filling, Sealing and Capping Machine for larger cup/container sizes. - Functions: The cup/container stacks are being put manually into the vertical storage device. Each cup/container will be picked automatically and transfered to the filling station (dosing unit is optional). Film is supplied to seal the cup/container before a capping unit closes it with a cap. Finally outfeed of the finished cup/container. - Stainless steel version (SS304), nitrogen filling device included, heat sealing system (0-300°C), film cutting depending on box shape. Servo motor control, OMRON PLC with Touchscreen, OMRON temperature control. - Specifications: max. speed of the machine in neutral: 20 cycles/minute; power 220V, 1.5kW; compressed air: 6bar, 1.2m³/min; machine dimensions and weight: depending on final customized configurations. Pgodpfxev Nky Ue Adljk That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, functionality: fully functional, fuel type: diesel, empty load weight: 18,000 kg, lifting height: 25,000 mm, Year of construction: 2023, operating hours: 1,278 h, total length: 8,830 mm, construction height: 3,150 mm, drive type: Diesel, load capacity: 6,000 kg, construction width: 2,530 mm, Rotating telehandler Speed class: 40 Technical condition: very good Pgjdpeumvfyjfx Adlsk