Used Sandblaster for sale (330)

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, total width: 2,550 mm, total height: 4,000 mm, loading space length: 4,250 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, VOLVO FH500 6x4 with FASSI F545RA2.27 and L214 jib and winch Liftable drive axle Liftable axle Drive axle RTS2370A. Double axle, single reduction, hypoid type. Longitudinal and transverse differential locks. Front axle load max. 10.0 t (technical) Rear axle load max. 21 t (technical) Volvo Dynamic Steering (VDS) 330 L aluminium tank right side AdBlue tank usable capacity 64 litres Rockinger 50 trailer coupling, for towing eyes with 50 mm diameter Electrical connection for trailer, 15-pin Euro 6, level E – onboard diagnostics Cabin colour signal white Heated and electrically adjustable exterior mirrors, wide-angle mirrors on both sides, kerb mirror on passenger side. Front mirror External sun visor LED main headlights Headlight cleaning system Automatic switching between daytime running light and low beam Automatic headlight leveling Daytime running light LED, "V-light" LED front fog lights Static LED cornering light Two LED revolving beacons (amber), mounted on cab roof front Cable entry through cab roof both sides Wiring for roof-mounted spotlights, max 280 W 2 air horns on the roof, controlled from the steering wheel Roof antenna and preparation for CB radio Roof bar for accessories, front Factory-mounted emblems/type designation Emission type plate (Euro...) L-label (low noise vehicles -96) Flatbed made of steel/welded construction, fixed-mounted, low profile Length approx. 4800 mm, width approx. 2480 mm Removable aluminium side walls by Suer, height 600 mm, anodised, each side (right and left) Foldable aluminium side boards by Suer, height 600 mm, anodised, each side (right and left) Recessed lashing rings, 2500 daN and 6500 daN per side, in perforated profile with flexible positioning 6 stake pockets per side (3 each) Hydraulic extension of bed approx. 1200 mm, galvanized, loadable up to 3000 KG, extendable with lighting and collision protection, recessed as low as possible, radio remote controlled Robust front wall consisting of welded frame with recessed stake pockets Panel cladding, mudguard in chequer plate, sandblasted and powder-coated, painted in vehicle colour Tool boxes between rear axles fitted with chequer plate 5 tool boxes, natural chequer plate finish, manufacturer BROSSBOX with ventilation. Size and configuration depend on wheelbase and available installation space. Sandblasted, powder-coated, painted in vehicle colour. Rear underrun protection and additional support installed, including all hydraulic and electrical connections (Duomatic and standard). Arrangement of sockets/pneumatics. Bedpfxex A Nnto Aiwoww F545RA.2.27 xe-dynamic » Base unit Winch type V20, for double cable operation with folding sheave and accessories Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chromed Double knuckle boom system with PROLINK (overbending up to 15°) Electronic overload shutdown with FX500 FASSI stability control FSC-S/II including LMB II Emergency stop and visual alarm (90% and 100%) Pressure relief and load holding valves XF (Extra Fast) + XP (Extra Power) systems RCH or RCS FASSI radio remote control with linear levers and pressure display (in bar and %) and 90% + 100% warning on display Danfoss D850 valve block with 4 control valves mounted on crane column Emergency control for crane operation High pressure filter supplied plumbed Separate hydraulic tank (180 l) with filt

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof Bwodpfxjwtairj Aiwsw • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: used, power: 1 kW (1.36 HP), gearing type: other, overall weight: 2,500 kg, empty load weight: 850 kg, maximum load weight: 1,650 kg, first registration: 04/2000, Year of construction: 2000, driver cabin: other, Very well maintained sorting grapple, top condition, completely sandblasted and painted, opening width 1,600 mm, cutting width 1,000 mm, for excavators from 15-20 tons, quick coupler and head plates on request, If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Bwjdpjxawyxefx Aiwow We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,900 kg, empty load weight: 2,100 kg, loading space volume: 12 m³, loading space width: 2,420 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We offer for sale, directly from our own production, brand new roll-off containers with steel side walls. The container features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Body dimensions: 6,000mm x 2,420mm x 800mm - 2x galvanized ladder rungs - 5mm S-235 floor sheet - Sheets and profiles continuously welded - Laterally spring-loaded steel side walls with 3mm S-235 steel thickness on each side - 7 side wall hinges per side for increased performance - Drive-over & spring-loaded rear gate (4.5t point load!) - Side walls, gate & rear frame can be completely disassembled quickly if required - External rollers are greaseable and replaceable - 5 pairs of recessed lashing eyes, each with a tensile force of 2.5t, can be positioned variably in the multilock rails - 2 lashing rings on the front, each with a tensile force of 7t - All steel parts are automatically sandblasted before processing! - Only steel from Thyssen Krupp is used, including a certificate - Priming with premium 2K zinc phosphate primer - Painted with high-quality 2K paint in RAL 7016 - Warning marking according to §32 (1) StVO & DIN 67520 - Including type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Immediately available Bsdpjyrpkzsfx Aiwoww - Unit price: €7,300.00 plus VAT - Also available in other body lengths (5m/5.5m/6.5m) Nationwide delivery is possible for an additional charge! If you are interested in other roll-off container products, we would be delighted to receive your inquiry!

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. Bwodpfx Aiowf Dwwewjw ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Bodpfx Aisy H Hkvjwoww Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Bedswiuaqopfx Aiwsww Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: new, working area L-W-H 1000 x 900 x 900 mm range L-W-H 1300 x 1750 x 2200 mm weight 350 kg Description: - Compact and elegant design - Easiest operation Bjdpfsxaatzsx Aiwoww - low material consumption - optimal use of space - highly effective dedusting - efficient way of working - Environmentally friendly working without dust nuisance - controllable material consumption - Any conventional, dry abrasive is suitable as a blasting material * such as B. corundum, steel sand, glass grain, glass beads, ceramic beads

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit Bwedpfx Aievyp H Uewsw The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, total width: 2,438 mm, total height: 2,896 mm, total length: 6,058 mm, overall weight: 3,300 kg, workpiece weight (max.): 5,000 kg, filter area: 40 m², tank capacity: 200 l, Equipment: lighting, We offer an absolute innovation! A high-quality high-cube container for both indoor and outdoor use. This container is made of durable Corten steel, ensuring a lifespan of at least 30 years. It is fully sealed, windproof, and waterproof. What’s included? ✔ Premium 200 pressure blasting unit with manual abrasive recycling, capable of processing and reusing all common reusable abrasives. ✔ Integrated filtration system inside the container (including impact pre-separator, connecting elements, etc.). ✔ Pre-installed electrical system and LED lighting for immediate use. Robust, safe, and ready for versatile applications! This unit is immediately operational and designed for various industrial uses. Transport Available Transport can be arranged upon request, with pricing based on daily rates. If you are interested or have any questions, feel free to contact me! For detailed information or a quote, please do not hesitate to reach out to me directly. I am happy to assist you! Bjdeuiwu Hspfx Aiwjww We also offer rent-to-own and leasing options for this sandblasting container. For inquiries or a price quote, please contact Mr. Andreas Wallner at any time.

Condition: used, mileage: 29,100 km, power: 90 kW (122.37 HP), first registration: 05/2012, overall weight: 5,400 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,500 mm, loading space length: 2,000 mm, loading space height: 400 mm, total length: 4,705 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar Fumo M30 C C 4x4 completely overhauled * 3L Turbo diesel 90kW / 122 hp Iveco engine, Euro 5 Bwedpfsz Nt Tfjx Aiwew * 29,100 km, 2,390 operating hours * Switchable all-wheel drive * Wheelbase: 2450mm (short) * Automatic transmission * 4-channel ABS, 4-wheel disc brakes, internally ventilated * High-pressure comfort hydraulics * Swivel function, 2 front * Leak oil line, front * Rear hydraulics * Front lift, SWV 500 * Ball head - trailer coupling * Light bar with 2 work lights * 4-pin socket, front * Power steering * Electrically adjustable, heated mirrors * Electric windows * Air conditioning * Auxiliary heater * Driver's suspension seat * 3-way tilting body (sandblasted, primed, and newly painted in RAL 2011) * Tires 285/65 R16c M&S, new * Workshop-checked, new inspection/service, various wear parts replaced, all filters and oils new, new TÜV/emission test - Leasing/financing/vehicle rental/trade-in/delivery possible. Various attachments and implements in stock. You can find other vehicles of the Fuso Canter and Multicar brands, as well as various attachments and implements, at: - Errors and prior sale excepted. - Our general terms and conditions apply.

Condition: excellent (used), Year of construction: 2012, Sandblasting cell with Staubli TX60L robot Country of origin: France Year of manufacture: 2012 Control system: CS8C-TX60 Number of axes: 6 Maximum load capacity: 5 kg Nominal load: 2 kg Bwsdjqgch Ejpfx Aiwow Reach: 920 mm Repeat accuracy: 0.03 mm Cell: ALPROBOTIC MB100

Condition: new, Year of construction: 2026, Oversized doors for loading and unloading. 2 exhaust openings (1 exhaust connection ø 92 mm and 1 exhaust nozzle ø 64 mm) for connecting a dust extraction system. Sandblasting cabinets for clean blasting operations without contaminating the work environment. Suitable for various blasting materials, e.g. quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. Optimal visibility and work protection during workpiece processing thanks to the viewing window with an applied protective film. Dust-free operation due to all-round seals on the lid and door frame. Bjdpfx Ascqm Sbjiweww Sturdy shelf grid allows placing workpieces inside the cabinet. With a discharge opening for changing the blasting material. Suction pipe for the blasting material is attached to the bottom of the collection container. With compressed air connection on the outside. Stable due to rubber feet. Scope of delivery: High-quality blasting gun with ceramic nozzle 4 ceramic nozzles (4/5/6/7 mm) 12-volt fluorescent tube with 230-volt power supply and external switch Incl. 5 replacement films for the viewing window Two large, integrated latex work gloves Model: SSK 2 Article No.: 6204001 Technical Data Volume of the work chamber: 220 l Air consumption: 200 - 500 l/min Working pressure: 2.8 - 8 bar Compressed air connection: 3/8" Abrasive grain size: 0.42 - 0.125 mm Internal dimensions: 840 x 550 x 360 mm External dimensions: 950 x 660 x 1380 mm Weight: 55 kg Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: good (used), functionality: fully functional, “Steinert NES 150 220 E 5009” for Sale Manufacturer: Steinert Type: NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted. Bsdpfxjzvbvie Aiweww

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Bwedsnab Rzspfx Aiwew Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), functionality: fully functional, mileage: 350 km, power: 129 kW (175.39 HP), first registration: 06/2026, fuel type: diesel, empty load weight: 3,300 kg, overall weight: 7,490 kg, tire size: 205/70R17,5, tire condition: 100 %, axle configuration: 4x2, wheelbase: 2,800 mm, axle spacing: 2,800 mm, next inspection (TÜV): 06/2026, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro6, suspension: steel, number of seats: 3, total length: 6,000 mm, loading space length: 3,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, airbag, blind spot assist, central locking, differential lock, fog lights, navigation system, non-smoking vehicle, onboard computer, power assisted steering, soot filter, tachograph, tire pressure monitoring, traction control, trailer coupling, winter tires, FUSO Canter 7C18 MAYTEC Roll-off System Payload, depending on the container: approx. 3.8 tons 3500 kg towing capacity Chassis warranty: 3 years or up to 100,000 km from the date of first registration Driver comfort suspension seat, horizontal suspension (standard) Fuel tank 100 L (standard) Traction tires on the rear axle (standard) Lane Keeping Assist (standard) Central locking with 2 remote controls (standard) Storage compartment above the windshield (standard) Glove compartment, lockable (standard) Immobilizer with transponder (standard) Storage compartment behind the seat (standard) Driver's seat armrest (standard) Fog lights, halogen (standard) Adjustable instrument lighting (standard) Daytime running lights, automatic (standard) Stabilizer bar, rear axle (standard) Tachograph with digital technology (standard) without tachograph check ABS with electronic brake force distribution (standard) Spare wheel / spare rim (standard) Electric windows (standard) Bwsdpfx Aieznug Eewjw Electronic Stability Program (ESP) (standard) Emergency braking assist system (AEBS) Lane Keeping Assist (LDWS) LED headlights (LH9) Reversing warning Light sensor Driver's airbag (SA5) (standard) Limited-slip differential (A86) Rear underrun protection (C01) Body mounting devices (CR8) Front license plate holder (C60) Batteries, 2 x 12V / 100 Ah, maintenance-free (EE9) 7" touchscreen radio/audio system, incl. Apple CarPlay (EF3) Reversing camera Trailer socket 12V, 13-pin (EX5) Heated mirrors (F62) Mirror bracket, medium, incl. wide-angle mirror (FM9) Automatic climate control (H07) Reversing warning (JW0) Exhaust system cover (KA6) LED headlights (LH6) Gearbox PTO (200Nm, 31kW), controlled via vacuum pump, for direct mounting of hydraulic pump (NQ7) Engine version, Euro VI OBD Step E (OM5) Trailer coupling ball hitch / 13-pin electrical system (QQ0) AdBlue tank cover (OU3) Special equipment for construction (ZT4) Manual engine speed controller (VA6) Mounting and installation of manual engine speed controller (VB1) Safety package Canter incl. rubber floor mats (YT7) Valve extensions (YT8) ( ,-- ) MAYTEC ROLL-OFF SYSTEM Maytec roll-off system AR-L55-2, serial no. A 426111 M08-K-2-75NA-2800 Steel construction, sandblasted, primed and painted Frame and hydraulic cylinders, umbra gray, RAL 7022 Lifting mechanism, narcissus yellow RAL 1007 Operation via cable remote control in the cab or next to the vehicle. Load holding valves on all hydraulic cylinders Emergency stop function Maintenance-free guide rollers made of polyamide Automatic locking of the bodies in the transport position Low design results in a low center of gravity. Lateral underrun protection, right side 9535 Lateral underrun protection, left side 9534 TÜV – full inspection P01-001 9301 Tank cover made of aluminum sheet 9510 Support bracket behind the cab with 2 holders for tool towers 9530 Tool towers, aluminum, incl. mounting on the support bracket (2 units) Height 780 mm, depth 500 mm, width 330 mm Intermediate floor for self-assembly 9531 with aluminum angle ( 21,800 ,--) Optional equipment: Aggregate body, type 2 – 1980 B, no. 0506, 3090x1980 mm, EURO 4,450,-- Load capacity 5000 kg Rear tailgate, hinged, drivable Lashing points according to DIN EN 12640, 8 units Protective covers, fully installed, EURO 450,--

Condition: refurbished (used), Year of construction: 1999, - two cutting heads Bwedpfx Aenab Sioiwsw - control unit is renewed - will be sandblasted and repainted - Pump optionally available - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,800 kg, empty load weight: 2,200 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 6,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering a new 13m3 roll-off container with drop sides for sale. The container has the following features: - Standard: DIN 30722-1 - Lifting height: 1,570 mm - Lifting bracket: 50 mm diameter - Container internal length: 6,500 mm - Container internal width: 2,420 mm - Container internal height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-part, spring-relieved side walls made of S235 steel with 3 mm side wall thickness - All steels exclusively from Thyssen Krupp - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing hooks in a multilock rail with 2,500 kg (positionable as needed) - 2 lashing rings on the front side, each with a tensile strength of 7,000 kg - Swing-out tailgate including spring-relieved access ramp - All posts and side walls can be easily and completely removed if required! - Front wall height: 1,600 mm - Longitudinal beams: IPN 180 - All-round net hooks - Painted in RAL 7016 anthracite - The container is completely primed with a 120mu zinc phosphate primer and then painted with high-quality 2-component paint in a thickness of 80mu - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Including nameplate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Warning marking according to §32 (1) StVO and DIN 67520 - Unit price: €7,800.00 plus VAT - Available immediately Bsdeypb Nwepfx Aiwsww Also in stock with other useful internal lengths (4.5m / 5m / 5.5m / 6m) Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.

Condition: refurbished (used), Year of construction: 2024, operating hours: 772 h, functionality: fully functional, working width: 510 mm, area performance: 3,060 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah D51+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It features a stepless drive, a detergent dosing system, automatic shut-off of the fresh water supply during filling, and a dirty water tank rinsing system. Additionally, the machine can be configured via app, providing access to maintenance and troubleshooting assistance. Bsdpfx Ajyrquhsiweww We have completely overhauled the Kärcher B50 W, checking and cleaning all components for functionality. The brush deck and suction bar have been sandblasted and newly powder-coated in our facility. The machine is fitted with two new maintenance-free gel batteries that can be conveniently charged using the integrated charger. New suction lips, a new brush, and a mop are included in the delivery scope. The machine is ideal for daily cleaning of workshops, schools, sports halls, or similar facilities. Technical data: Working width: 510 mm Tank capacity: 50 liters / 50 liters (fresh/dirty water) Operating time: max. 3 hours Area coverage: 3,060 m²/h

Condition: reconditioned (used), functionality: fully functional, fuel type: electric, Year of construction: 2005, Ratzinger RC 12 Impact Crusher, Bohringer RC12 + B1000 L15000 Conveyor Crusher completely overhauled Crusher mounted on a hydraulic chassis, very easy to transport. Crusher sandblasted and painted BRAND NEW conveyor L15000 Rotor diameter [mm]: 1100 Inlet [mm]: 1220x900 Maximum material inlet [mm]: 600 Crusher electric motor: 132 kW Bwedey Uh Swjpfx Aiwjw Side conveyor electric motor: 5.5 kW Main conveyor electric motor: 4.5 kW Vibrator electric motor: 7.5 kW Conveyor belt electric motor: L15000: 7.5 kW Gap adjustment [mm]: 0-20 to 0-100 - hydraulic adjustment Capacity [t/h]: 100 to 250 depending on the material and the fraction obtained Crusher equipped with a side conveyor with pre-screening Crusher weight: 31,000 kg Conveyor weight: 1500 kg The crusher is 100% operational and ready for operation. Crusher liners are 90% operational. The crusher has been completely overhauled, with new bearings and a new electrical system. Blow bars rotated

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof Bsdpsy U Autofx Aiwsww • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 031022140047, Year of construction: 2022, operating hours: 126 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, overall weight: 145 kg, laser power: 30 W, feed length X-axis: 130 mm, feed length Y-axis: 180 mm, feed length Z-axis: 330 mm, We are offering for sale a professional industrial SLS 3D printer, the Sinterit Lisa X, from our company's assets. The machine has been used very little, exclusively for development purposes, as evidenced by its total runtime of only 126 printing hours. The printer is in like-new condition, fully functional, and ready for immediate deployment in your production. Before the sale, the machine underwent a complete diagnostic check, software update, and professional service by an authorized partner. During this service, the printer received a significant hardware upgrade. The original wire-based powder deposition mechanism was replaced with a new and highly reliable system using a strip (so-called Recoater Strip retrofit) as part of the authorized intervention. This ensures maximum reliability and trouble-free operation. Furthermore, the seals of the printing chamber were replaced, the machine was professionally cleaned, the electronic contacts were treated, and the paint was restored. The machine has successfully completed a calibration print under load and is running on the latest firmware. Regarding the technical specifications, it utilizes Selective Laser Sintering (SLS) technology with a 30W IR laser. The printing speed reaches up to 14 mm/h, which is ideal for rapid prototyping and small-batch production. The printing volume is 130 x 180 x 330 mm for PA and PP materials and 130 x 180 x 340 mm for flexible materials. A major advantage is the open system of the Sinterit Studio Advanced software, which allows full support for third-party printing materials and access to dozens of printing parameters. As a huge bonus, we are including the available stock of printing powder completely free of charge with the printer. If interested, it is possible to purchase the complete set of accessories for subsequent processing of the prints (cleaning manipulator, sandblasting station, certified ATEX vacuum cleaner) after mutual agreement. We will be happy to provide you with more information, send you the complete machine specifications, or arrange a personal inspection. Bjdpezyagzjfx Aiwoww

Condition: used, maximum load weight: 13,330 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 6,150 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, Year of construction: 2026, Equipment: ABS, - 2 steerable axle sets ECO/low-maintenance with disc brakes, each with a load capacity of 9,000 kg - Dual-circuit EBS pneumatic braking system according to EC guidelines, with ALB control and parking brake as a spring-loaded accumulator, automatic linkage adjusters. Duomatic brake connection - Air suspension with raising and lowering function - Chassis: Stable welded construction made of high-strength fine-grained steel sheets, formed and welded to prevent twisting. The longitudinal and transverse beams form a single plane with the main frame. - Tires: 4 x 385/55 R22.5 on steel rims - Fixed drawbar with DIN towing eye 40 mm (length-adjustable drawbar) - Electrical system: According to StVZO guidelines, in a protected installation, 5-chamber tail lights integrated into the underrun protection, Euro plug, 15-pin socket, 2 red position lights above the rear portal. ABS with connection cable. 1 marker light mounted on each side of the rear frame. - Floor: Made of 24 mm thick vehicle construction panels, film-coated underneath to prevent moisture penetration, with a non-slip screen-printed texture on top, laid flat and sealed around the edges. - Front wall: Made of special vehicle construction plastic panels, closed up to the roof, with a central strut laid flat. Without a front wall cover at the top front. - Side walls: ZIKUN flap swivel mechanism, continuous sideboard, horizontally divided. By folding down the lower sideboard, the upper wall is mechanically swung onto the roof. The lever kinematics, supported by a spring pull, is attached to the front wall. Sideboard upper parts made of special aluminum composite panels, 25 mm. Bwedezp Ak Uspfx Aiwjw - Fixed roof consisting of steel stringers with permanently glued aluminum sheets, powder-coated in white RAL9010 on the outside - Steel impact rail welded on both sides as a forklift protection. Rubber impact buffer mounted at the rear under the rear door - PVC quarter fenders on the axles - 1 set of mud flaps for the fenders - 2 wheel chocks with holder - Lateral underrun protection, galvanized and foldable brackets, aluminum planks with rounded end pieces - Continuous splash guard under the underrun protection at the rear - Complete body sandblasted, primed and painted in a single color - Chassis: MAN graphite black - Outer frame and body: RAL 9010 pure white - Inspection 60001-0002 TÜV approval trailer/semi-trailer - Drawbar fork length-adjustable - Central lubrication strip for slewing ring and drawbar - 2-leaf rear door made of aluminum sandwich panels with internal rotating bar locks. The doors have a smooth surface - Clad the front wall in the lower area with a 280 mm high aluminum profile as impact protection. - 2 x retractable access steps in the lower part of the folding wall on the left and right, approx. 600 mm long - Integrated cargo securing system with CRS system (4 rows) in the roof and floor, including 4 load securing bars with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra tested according to VDI 2700 Code XL) - Interior light as an LED spotlight, switched via parking lights, with a separate switch - Additional interior lighting as an LED spotlight mounted at the rear - 2 x pallet stopper on the left and right - Tire pressure monitoring system according to ECE R 141 - Additional camera on the trailer for rear view video system, camera at the rear above the rear door

Year of construction: 2012, condition: good (used), Manufacturer: Hein Lehmann Liwell Type: LF 1.5 – 5.67 / 18 ED Deck size: 1.500 x 5.670 mm Number of decks: 1 Bwedsy A N Tfspfx Aiwjw Included: – Frame – Top Cover – Electrical Motor – New V-belt pulley’s – New Rubber springs Vibrating screen will be overhauled, sandblasted and painted.

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. Bwsdpey U Auysfx Aiwow • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on