Used Sandblaster for sale (278)

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. Gkedpokw Ukuofx Ab Uef •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,500 mm, total height: 2,350 mm, air demand: 200 m³/h, Cartridge filter unit MBX-6000 with 8 cartridges. Effective air capacity 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, pneumatic filter cleaning with 10 minutes after-run, dust bins: 4 units, each 30 liters. Godpfsx Ai Hpox Ab Uskf

Condition: used, maximum load weight: 13,420 kg, overall weight: 16,000 kg, first registration: 01/2013, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 45 m³, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2013, Wagon No. G0113245_1 – Manufacturer: Krone. * Sliding roof curtain * Simple corner fittings * Plug-in slat (wood) * Side/rear contour marking * Load certificate Code-XL * Portal door with double locking rods (external) Gjdpfoxw Dqrsx Ab Uokf * Side sliding curtain * Forklift accessible * Fixed support legs * Prepared for rail loading * Lashing recesses * Lashing points * Perforated pallet stop bar Used roof curtain. Delivery: IMMEDIATELY AVAILABLE. New curtain. Freshly painted. Portal door with double locking rods (external). Technically ready for operation, superstructure and support legs newly painted. Undercarriage sandblasted and newly painted. UVV valid. BRAND NEW PAINT!!!. LASI CODE XL!!!. Dimensions are approximate. Offer is subject to prior sale, prices are net ex location D-59302 Oelde. For further details, please contact us by phone or email:

Condition: used, maximum load weight: 44,980 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 09/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Full equipment details available on request. Chassis, cranked * Special steel frame made of high-strength fine-grained steels, electric welded at connection points, well-dimensioned outer frame * 4-axle configuration. Wheel covers above the axles with spray suppression * All steel parts sandblasted * Side underrun protection mounted, made of anodized aluminum * Increased point load capacity approx. 30,000 kg over approx. 4,000 mm * Special construction in the cranked area for the largest possible low-bed length in combination with AluLeg drop supports instead of telescopic spindle landing gears, max. rear swing radius of the tractor unit approx. 2,100 mm Special body with rear stanchion extension * Self-supporting aluminum roof girder/profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stanchions expandable to approx. 4,200 mm * Three sliding stanchions per side with rubber tension relief * Additional central stanchion latches in the roof girder and parking position, operable by pull cable and spring latch * Mechanical lifting roof with height adjustment, lifting roof height approx. 400 mm, operable from both sides or one side only, without opening the opposite side and doors * Additionally, height adjustment of approx. 480 mm in approx. 40 mm increments via height-adjustable stanchions * Front cover on the bulkhead for driving under tarp up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on each side, 450 mm pockets at bottom, four rows of single pockets above * In the high-bed only 3 rows of insertable slats. Intermediate distances evenly distributed Gjdpfolthguex Ab Uskf Floor * Approx. 27 mm special water-resistant bonded beech multiplex boards, rough surface * Steel plate in the wheel arch area * Forklift suitable according to DIN ? standard * Flush outer frame surface Brakes * WABCO air brake system with EBS according to EC standard 71/320 EEC incl. PREV (Park Release Safety Valve) * Spring brake cylinders as parking brake * Wabco Smart Board with odometer and axle load indicator Axles * 4 x 10,000 kg SAF/Sauer with drum brakes in low loader design * Air suspension with lift and lowering function, total stroke approx. 230 mm * Third and fourth axle as friction-steered trailing axles with electric and mechanical lock Twin tyres * 235/75 R 17.5, -16 ply, incl. spare wheel holder, without spare wheel Paintwork * Chassis in RAL 3002 red, single colour * Central stanchions, axles KTL-coated black * Corner stanchions hot-dip galvanized * Plastic parts black * Hot-dip galvanized parts unpainted * Rims in factory silver * Body single-colour in RAL shade Special equipment included * Air suspension in ECAS version, operation on the semi-trailer * Oversize signage front and rear, galvanized, stepless telescopic, with attached marker lights incl. sockets for revolving beacons (small plates) * Additional sliding roof frame release from outside * 4 stanchion adapters for special outer frame profile, for arbitrary locking of central stanchions * PVC sliding tarpaulins, color similar to RAL 9006 silver * Translucent roof tarpaulin, oversize and overheight specification, flat hooks, tarpaulin folds, closures with locking pawl/OCS * Rear left telescopic socket for warning beacon incl. light * Outer frame for machine transport with approx. 64 lashing poin

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG4003ESGR0ZL180W, Year of construction: 2023, !! We would be happy to advise you !! Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Gkjdpfxeq Ikg De Ab Usf Speed ////: 20-60 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4KW Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 210 kg System dimensions ////: approx. 3560 x 1320 x 1500 mm System material ////: approx. 1500 x 960 x 1120 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer holder ////: matching ink wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Print mark sensor included • Automatic stopping for empty products (no product - no bag) • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Gassing units for protective atmosphere (extend product shelf life) • Length-dependent product processing using photocell query

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, rear discharge Body: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – per DIN 30722-1 - Internal clear dimensions (LxWxH): 5500x2394x1003 mm Gkjdpfex Avkhex Ab Uof - Material grade: S235 (St-37) - Flooring/wall panels: Smooth floor plate 5 mm thick, sides 3 mm, roof and rear wall 4 mm - At the rear, bottom: 2x Storz A couplings with ball valve (4 inches) - At the rear, top: 1 Storz B coupling with elbow and cap (2 inches) - At the front hook, top: 1 Storz B coupling with elbow, coupling and cap (2 inches) - Galvanized and bolted access ladder at the front bulkhead, pipe for ventilation - Frame made of INP180 - On the roof: manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for water tightness) - Greasable steel rollers Tanks welded, degreased, sandblasted, internally primed with Epoxy Temabond ST 200, 300 µm, externally primed with epoxy resin paint, 60 µm and finished with 2-component paint (polyurethane paint B7) 40 µm, in RAL color shade 3000 Red Supplied with UVV sticker (DGUV), checklist (safety instructions), and warning markings – watertight (tested for water tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 22 ratings ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ shipping possible : 25-day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ Godpfx Abefw Nfhe Ujkf EXCL. VAT & SHIPPING* ►►Buy It Now◄◄ ✳️FEATURES A blast cabinet is an effective way to clean, deburr, finish and prepare a variety of materials. No matter what type of media you use (alumina, glass beads, silicon carbide, plastic beads, or organic materials, etc.), blast cabinets designed for continuous blasting will undoubtedly increase your production and reduce your costs by eliminating these manual, labor-intensive operations such as Replace grinding, dry cleaning, acid etching, wire brushing and deburring. Here at Proton we have a wide range of blast cabinets to suit your specific application, including various sizes of light blast cabinets, high pressure blast cabinets, wet blast cabinets and more. ✳️TOP QUALITY BLAST CABINETS✳️ As the market leader in industrial blasting and sandblasting, sand and media blasting cabinets, our team is proud of our reputation. We've earned this reputation thanks to our focus on customer service and the decision to only ship high quality blasting cabins and equipment. Our trusted suppliers understand your needs and build their equipment to last. Our high-quality media blast cabinets are easy to maintain and made from high-quality materials, so you have less downtime. ►►►SV-1000 BLAST CABINETS◄◄◄ ✨Sandblasting booth technical specifications ✨Air consumption: 300-1000 lt / min ✨Working pressure: 2-12 bar ✨Grinding type: glass ball (glass sand), aluminum oxide, etc. ✨WORK SPACE (mm ) : 1000 X 800 X 750 ✨EXTERNAL DIMENSIONS (mm) : 1100 X 1250 X 2000 ✨DOOR DIMENSIONS (a x h mm) 670 X 630 ✨FILTER TYPE AND QUANTITY: CARTRIDGE FILTER - 1 PIECE ✨AIR CONSUMPTION ( m3 /min ) 1 m3 / min ( 1000 lt/min ) ✨ELECTRICITY 380W ✨ TURNTABLE DIAMETER 420 mm. ✨WEIGHT CAPACITY OF THE TURNTABLE 350 kg ✨CART FOR LOADING Available ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Year of construction: 2007, operating hours: 4,000 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: D6588, Screening machine, capacity 20 [t/h]. Double unbalance motor 3.0 [kW] 975 [rpm] 400 [V] 50 [Hz] 330 [kg] Drawing No. 1055.02M.SC156 Refurbished used unit General inspection of all welds. Disassembly of double unbalance motors. Oven drying and new tropical protection. Replacement of bearings and seals. Inspection of wire cloth tensioning systems, as this is a critical technical point. Sandblasting Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Supply of 08 new springs The NOFEM 1215 vibrating feeder, refurbished used unit Supply of new and bolted Hardox 500 wear liner Disassembly of double unbalance motors. Oven drying and new tropical protection. Replacement of bearings and seals. Sandblasting Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Supply of 04 new springs The shared steel frame for both units, new Welded, heavy-duty assembly designed to withstand the high acceleration forces of an energy-intensive sizer. Gedpfxowzliaj Ab Uokf Sandblasted steel structure. Anticorrosion paint, 1 coat Varnish in the RAL colour of your choice, double coat Optional Walkways and stairs to be defined according to your project requirements Galvanization

Condition: good (used), Year of construction: 2004, table length: 3,000 mm, table width: 4,500 mm, operating pressure: 3,800 bar, warranty duration: 12 months, total length: 4,500 mm, total width: 3,000 mm, water pressure: 3,800 bar, (Pictures in actual condition) - two to four cutting heads - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: Gkedegvpu Uspfx Ab Usf - Z-axes can be moved in relation to each other - Z-axes double guided - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: used, mileage: 8,500 km, power: 227 kW (308.63 HP), first registration: 07/2025, overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, gearing type: automatic, loading space width: 2,480 mm, loading space length: 6,600 mm, loading space height: 2,100 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, STANDARD SPECIFICATION * Local transport driver's cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Front: 7.50 t, parabolic, 152N * Goodyear * Emission standard Euro 6 * EAS unit right, discharge right pointing to the rear * Fuel tank left * Tank for AdBlue® 30 l, right chassis side * PACCAR Connect * Warranty Plus-Drivetrain-3 years-200,000 km Options * Mechanically reinforced cab suspension * Exterior sun visor green translucent * Fog lights and cornering/turning lights * Central locking, 3 keys, 2 remote controls * Pneumatic steering column lock * Driver's seat: air-sprung luxury driver's seat * Armrest driver's seat * Passenger seat: air-sprung * Armrest passenger seat * Roof hatch with manual operation * Front axle 1, 7,500 kg, load index 154 * Rear: 13.00 t, air suspension, SR1344 * Rear axle 1, 12,600 kg, load index 148 * F1, 315/70R22.5GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5GO KMAXD2 154/150 L Traction CBA * Engine PX-7, 227 kW/308 hp. Driver's cab emblem: 310 4,815.00 4,815.00 * Automatic transmission PowerLine, 8-speed * 8-speed PowerLine 8AP1200 overdrive transmission, 4.89-0.64 * Rear axle ratio 5.14 * Mechanical differential lock * Parking brake actuation with test position * Wheelbase 5.00 m/rear overhang 2.25 m * Longitudinal members 270/8.0 mm, without internal reinforcement * Fuel tank made of aluminum, 340 l * One wheel chock * Use with drawbar, type plate, up to max. GVW * Cross member D85-Dc70-V25, coupling D85, mounted * Pneumatic connection for trailer, rotary coupling * Electrical connection trailer EBS, 24V/2x7-pin * Mounting of bodies BAM 1, loose consoles * Generator 100 A, batteries 2 x 175 Ah * Air intake above, behind the driver's cab Body: Through-loading length: 6,600 mm Loading length: 6,750 mm Through-loading width rear portal: 2,480 mm Loading width i. L.: 2,480 mm External width: 2,550 mm Through-loading height: 2,100 mm Loading height approx.: 1,210 mm Gkodpfevxm Nkjx Ab Uof Overall height approx.: 3,483 mm Body weight approx.: 2,700 kg /- 5% according to DIN, depending on equipment (Without guarantee) 1.3 Substructure: Sturdy lightweight construction made of pressed steel sheets, cleanly electrically welded. Crossbars with buckle-resistant outer frame. ZIKUN folding swivel mechanism. Continuous side wall, horizontally divided. By folding down the lower side wall, the upper wall is mechanically swung onto the roof. The lever kinematic, assisted by spring tension, is mounted on the front wall. This ensures that there are no mechanical parts in the cargo area or in the corner stakes. The power transmission is via a torsion tube in the roof, so that the side walls can be moved smoothly and easily in any position. Important: When open, the lower side wall stands vertically on the vehicle. At the front on the end wall, a level, smooth entrance without obstructive stanchions. Upper folding wall parts made from special 25 mm aluminum composite panels. Central lock on the right and left side walls. Upper side wall parts do not extend beyond the roof edge when open. open, prepared for the addition of a tail lift (see special versions) Fixed roof consisting of steel bows with permanently glued-on aluminum sheets. Powder-coated in RAL 9010 pure white. The entire body sandblasted, primed, and painted in a single color. Substructure and body: DAF H3279WHTE Movable entry step On each side, 2 movable entry steps in the lower part of the folding wall on the left and right, approx. 600 mm lon

Condition: new, Year of construction: 2023, functionality: fully functional, warranty duration: 12 months, !! We are happy to advise you !! Production orientation ////: Vertical Conveying system ////: Infeed and discharge optional and product-dependent Film feed ////: rear Forming shoulder ////: fixed Operator display ////: Touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (dependent on film width) Packaging height ////: dependent on forming shoulder Speed ////: 15-30 bags/min depending on material, package size, and product Film width ////: 110-320 mm Power consumption ////: approx. 4.6KW Power supply ////: 220-240 V / 50 Hz / single-phase Machine weight ////: approx. 600 Kg Gkedoq Ikhaspfx Ab Uef Machine dimensions ////: approx. 1720 x 1400 x 1750 mm Machine material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable ink wheel printer available as an option for an additional €1,200 Delivery time ////: Current delivery time under 10 weeks Platform and Z conveyor system €12,000 Features: Stainless steel construction—also suitable for the food industry • Application for powders, granules, liquids, pastes/dough, and small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control with color icons • Pouch closing system for finished stand-up pouches • Safety protection covers • Can be combined with upstream and downstream machinery • Customized modifications/constructions on request • 12-head weigher integrated • each hopper 0.8L Additional options (on request and at extra charge): • Stainless steel finish/coating • Zigzag knife, Euro hole punch, etc. • Automatic stop for empty product (no product – no bag) • Automatic product feeding systems, stepwise insertion systems • Perforation units (tear-open thread) for easy opening • Length-dependent product processing by photocell sensor Production orientation: Vertical

Condition: new, mileage: 4 km, power: 290 kW (394.29 HP), fuel type: diesel, axle configuration: 6x6, tire size: 14.00 R 20, fuel: diesel, wheelbase: 5,100 mm, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2025, Equipment: ABS, air conditioning, all wheel drive, - Radio/cassette player - Spare wheel - Sun visor flap - Power take-off (PTO) Mercedes-Benz Arocs 3340A 6x6 Cargo The Mercedes-Benz Arocs 3340A 6x6 Cargo is a robust truck designed for personnel and cargo transport under challenging conditions. Its powerful 394 hp engine and 6x6 all-wheel drive ensure top performance on rough terrain. The versatile flatbed with bench seating and twistlocks makes it ideal for troop transport and container logistics. This vehicle delivers reliability for demanding off-road missions and operations. Technical data Mercedes-Benz Arocs 3340A 6x6: - Drive: 6x6 configuration for maximum traction off-road. - Gross Vehicle Weight (GVW): 27 tons, suitable for heavy-duty transport. - Axle configuration: Front axle 8.0 t, rear axles 2 x 13.0 t with differential locks. - Suspension: Reinforced 3-leaf parabolic spring on front axle (8.0 t) and rear axles (2 x 13.0 t). - Wheelbase: 5100 mm for stability and maneuverability. - Engine: 12.8-liter inline 6-cylinder OM460 Euro III, 394 hp (290 kW), 1900 Nm. - Transmission: Mercedes PowerShift 3 with off-road mode and transfer case VG 3000-3W. - Tyres: 365/85 R 20, optimized for off-road use. Flatbed body features: - Dimensions: Length 7000 mm, width 2550 mm, internal height 2000 mm. - Floor: Slip-resistant checker plate steel floor (3/5 mm, S235JR) with 10 lashing points. - Sidewalls: Folding, removable side panels and tailgate, optionally usable as flatrack. - Twistlocks: 4 units for ISO 20-foot containers. - Benches: Folding benches for 30 persons, 415 mm per seat. - Roof and tarpaulin: Steel hoops with waterproof PVC tarp (630 g/m², UV-resistant), color RAL white. - Extras: Folding steps, rubber buffers, splash guard with stone chip protection. Included accessories: - Lockable toolbox on chassis. - Brackets for water and fuel canisters. - Spare wheel holder with manual winch. Paintwork: - Epoxy primer, sandblasting (SA 2½), wax coating, RAL color tone white. Outstanding performance: - Versatility: Flexible for personnel, freight, or container transport. - Durability: Solid steel construction for off-road applications. - Efficiency: Quick adjustment of the flatbed without tools. - Reliability: Reinforced suspension and powerful engine. Fields of application: - Military: Troop and equipment logistics. - Logistics: Transport in remote areas. - Container logistics: Handling of ISO 20-foot containers. Additional options: - Lockable fuel caps, under-tank protection. - LED lighting, first aid kit, warning triangle, 6-kg fire extinguisher. Powerful under the toughest conditions: The Mercedes-Benz Arocs 3340A 6x6 Cargo excels in tough terrain and demanding logistic operations—the ideal solution for heavy-duty transport tasks. Availability: 4 units from September 2025. Images will be updated upon arrival. Contact: or General information Year of manufacture: 2025 Gkjdpfx Aboxtm Dae Uof Technical information Number of cylinders: 6 Engine displacement: 12,800 cc Gross vehicle weight: 27,000 kg Drivetrain Fuel tank: 390 liters Transmission...

Condition: new, Product description: Godpfx Asgha A Seb Uskf Casting, forging, pressing, heat treatment, finished product, semi-finished product, steel fabrication etc. It is preferred for surface cleaning, pre-coating preparation or revision works. Its distinct advantages are that it enables versatile sandblasting, and that large and small parts with irregular geometry can be sandblasted. With the help of the digital clock we use in our machines, the sandblasting time can be adjusted according to the part type and desired sandblasting surface. Casting sandblasting, forging sandblasting, press - heat treatment workpieces sandblasting, finished product sandblasting, semi-finished sandblasting, steel fabrication sandblasting, etc. used in transactions. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. It can be designed as a continuous system upon request and can be included in the paint line.

Condition: used, tank capacity: 3,000 l, GENERAL Design: vertical Remarks: externally mounted steel parts sandblasted and primed; top cover also heatable/coolable External diameter: 1,450 mm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 4,300 mm Heating/Cooling: available Power: 2.2 kW Agitator: anchor agitator Mounting type: feet Gsdpfx Aoxqbp Esb Uskf Cylinder tempering: double jacket Volume: 3,000 liters Double jacket material: steel Product-contact material: V4A 1.4571 (AISI 316) Condition: used Cylindrical height: 1,650 mm Last application: chemicals TANK Number of feet: 3 pcs HEATING/COOLING JACKET Bottom tempering: double jacket EQUIPMENT Manhole / access port: on top cover Outlet (alternative specification): 135 mm Note: slight residues/adherences MATERIAL FEATURES Feet material: steel AGITATOR Voltage: 220/380 volts Agitator positioning: centered on top cover

Condition: new, power: 397 kW (539.77 HP), overall weight: 32,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 4,000 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. Gkodpfx Aowtairob Uof • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on

Condition: new, power: 270 kW (367.10 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day cab * Mechanical cab suspension * Passenger seat: "Cinema" type with fabric upholstery * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Goodyear tires * Emission standard Euro 6 * Automated transmission, TraXon, 12-speed * Standard component arrangement * Fuel tank left side * PACCAR Connect * Warranty Plus – Driveline – 3 years – 500,000 km Options * LED headlamps, cornering and fog lights * Windscreen with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for day cab * Mirror housings black * Cab color: roof spoiler * Headlamp surround color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver’s seat: Luxury Air * Driver’s seat armrest * Dashboard table * Cooler or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Roof hatch with electric control * ECAS remote control with extended functions * Preparation for toll system * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Wireless charging device * Reverse warning system * Front axle: 8.00 t, air suspension, 161 N * Front air suspension: medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * MX-11 engine, 270 kW/367 hp, cab emblem: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio: 2.47 * Mechanical differential lock * MX engine brake Gksdpfx Aer Sn Nnob Uof * Parking brake assistant * Wheelbase: 5.10 m / rear overhang: 2.75 m * Longitudinal frame members 260/7.0 mm, continuous inner reinforcement * Approved for operation with drawbar, type plate, up to max. GCW * Crossmember D137 + Rockinger coupling D130 * Pneumatic trailer connection, rotating coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift application Body: ZIKUN Swing-Board I body Through-loading length: 6,650 mm Load length: 6,800 mm Clear portal: 2,480 mm Internal load width: 2,480 mm External width: 2,550 mm Through-loading height (internal): 2,100 mm Loading height: approx. 1,177 mm Overall height unladen: approx. 3,479 mm Substructure: durable lightweight construction from pressed steel sheets Bulkhead: from special vehicle construction-grade plastic panels, closed up to the roof, with a central post, flatly installed Side walls: ZIKUN folding swing system Roof: solid roof consisting of steel spar with permanently bonded aluminium sheets. Powder coated in RAL 9010 pure white Bumper protection: welded steel bump strip on both sides PVC mudguards on rear axle 1 set mud flaps for same Holder for wheel chock + 2 chocks Red position lights above tail lift Contour markings: side in white, rear in red Anti-spray mats in rear mudguards Paintwork: Entire body sandblasted, primed, and painted in single color or powder coated. Substructure and body: DAF W9815WHTE Integrated load securing with CRS system (4-row) in roof and floor, incl. 4 locking bars with 6 horizontal spring telescopic pipes (CRS-System Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL) Sliding step on each side, 2 sliding entry steps in folding wall base left and right, approx. 600 mm long Pallet impact protection, left and right Interior lighting as LED spotlight mounted at the rear upper section, with connection to cab switch Additional interior lighting

Condition: new, functionality: fully functional, machine/vehicle number: V101VVNG6004ESGR0ZL200H, Year of construction: 2023, Production orientation ////: Vertical Conveyor system ////: Feed and discharge optional and dependent on the product Film feed ////: rear Form shoulder ////: fixed Operator display ////: touchscreen with memory function Drives & control ////: 3 servo motors and PLC control Packaging length ////: 50-190 mm Packaging width ////: 50-150 mm (depending on film width) Packaging height ////: dependent on forming shoulder Speed ////: 20-110 bags/min. depending on material, packaging size and product Foil width ////: 100-320 mm Consumption ////: approx. 4.6KW Gksdpfx Ajq Ikg Ijb Uof Power supply ////: 220-240 V / 50 Hz/ 1-phase System weight ////: approx. 240 Kg System dimensions ////: approx. 1500 x 960 x 1220 mm System material ////: "304 stainless steel with sandblasted surface treatment" External compressed air required ////: Yes, 6KG/cm³ 85L/min Printer mount ////: suitable incl. wheel printer optional for an additional charge of EUR 1200 Delivery time ////: Current delivery time under 10 weeks Features: • Stainless steel version also suitable for the food industry • Application for powder, grains, liquids, paste/dough and Small parts such as screws • Industries: pet food, cosmetics (soap, shower gel), food (coffee, nuts), metal industry • Simple touchscreen control using color symbols • Bag closing system for finished stand-up pouches • Safety protective covers • Can be combined with upstream and downstream machines • Customer-specific changes / designs on request Additional options (on request and for an additional charge): • Stainless steel finish / painting • Zig-zag knife, Euro hole stamp etc. • Automatic stopping for empty products (no product - no bag) • Automatic product feed systems, cyclical insertion systems • Perforation units (tear thread) for easy opening • Length-dependent product processing using photocell query

Condition: new, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our entire inventory of vehicles, including those available immediately or at short notice, on our website. Extract from the equipment list. Full equipment details available on request. Chassis: * Welded construction using high-quality steel profiles with punched-through cross-members, designed for high point loads Coupling device: * 2-inch kingpin Landing gear: * 2 x 12 t landing legs with compensating foot and single-side operation on the right front side Axles: * 3 x 9 t air suspension axle units * Disc brakes * SAF brand, with disc brake approx. 430 x 45 mm * ABS * Centrally positioned wheel mounting, 10-hole with ET 120 * Total pneumatic suspension lift approx. 200 mm, of which approx. 140 mm raising and 60 mm lowering, controlled via rotary lever valve with detent Brake system: * Dual-circuit air pressure braking system according to EC standards with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Mistake-proofed coupling heads permanently mounted to the front cross member, with no connecting line to the towing vehicle Tyres: * 6 units, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice Mudguards: * According to EC, PVC mudguards in front of and behind the axle unit Spare wheel holder: * 1 double basket incl. mounting kit for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, pulling force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, pulling force approx. 2.5 t * Outer frame with holes for tension straps approx. every 500 mm Front wall: * Reinforced steel construction, fixed * Interior lining approx. 9 mm birch plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting system: * EC compliant, 24 volts with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline lights at rear * Number plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross member Equipment: * ECE 70 warning board Gsdpfx Abswx Db Aj Uskf * Bracket for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single color * Chassis: RAL 3002 (carmine red) * Sideboards: Anodized * Sideboard stanchions: RAL 3002 (carmine red) * SSV: Aluminum anodized * Hubs: KTL coated * Rear underrun guard: white (RAL 9010) * Attachments: galvanized/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets across the loading deck * 20 stanchions made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions mounted inside front wall * Sideboards: 5 x 25er sideboards and rear wall made of anodized aluminum hollow profiles, foldable and removable, removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion rails for sideboards and stanchions left and right under the chassis * Container locks for 1 x 40' and 2 x 20' containers at rear flush, container locks for 1 x 20' container in center position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Condition: new, Step By Step Wet Painting Systems Elboy Industrial Solutions designs and manufactures full range of paint shops for your product. With ELBOY, you can navigate through your facility with virtual reality in the design phase, enabling you to make the desired changes in the design phase and not to encounter the surprise results. It provides designing and manufacturing services for your application by paying special attention to environmental pollution and work safety issues for the processes of Sandblasting, Putty, Washing, Undercoat and Finishing Coat for all sizes of products. Step by Step are systems with overhead conveyor or floor conveyors which can be designed for all sizes of product. Booths of Sandblasting, Chemical Washing, Pre-coat, Drying, Putty , Top Coat and Baking can be integrated into the system. In order to respectively carry out the processes determined by the system step by step, the automatic doors are opened at the end of the time period and the product automatically proceeds to the next process line. These fully automated systems are controlled via a 15” touch screen and provide various reporting methods such as main computer monitoring, product reporting and score reporting upon the demand and provide remote control. These are the paint shops where your product is designed and manufactured by our engineers in line with your capacity, use area and other demands. Gksdpfjdy Dw Ajx Ab Usf Maximum efficiency is aimed to be provided with minimum staff and the least space usage at electrostatic powder coating or wet paint, sandblasting, varnishing, coating, washing and similar system requirements.

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose was manufactured in 2023 and has only 813 operating hours. We have completely overhauled the machine: each component was cleaned and function-tested. The suction bar, base plate, and bumper were sandblasted and powder-coated in-house. For optimal vacuuming performance, new squeegee blades have been installed on the suction bar. Gkedpfoxx Ta Ejx Ab Ujf The machine is sold with new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a chemical dosing system, which accurately delivers cleaning agents during the cleaning process. For improved visibility of your working path, the machine has a switchable working light. The Kärcher B200 R is ideal for medium to large areas such as logistics warehouses, workshops, or underground garages. Technical data: - Working width: 90 cm - Fresh water tank: 200 liters - Suction width: 118 cm - Weight: 957 kg

Condition: new, power: 375 kW (509.86 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,480 mm, loading space length: 3,800 mm, Year of construction: 2025, total width: 2,550 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Chassis – New Vehicle: – NEW MODEL 2025 • Manufacturer/Model: Volvo FH500 6x2, wheelbase 3700 mm • Fifth wheel plate with sliding function and self-lubricating (Jost JSK type), mounted on the subframe • Reversing camera fully installed Bodywork: • Execution of all chassis modifications necessary for crane installation, dismantling and reinstallation of attachments, exhaust system, tanks, etc. Modification of the vehicle frame. • All chassis and superstructure works are carried out in compliance with the bodybuilder guidelines of the respective chassis manufacturer and performed to the highest quality standards. • Complete assembly of a custom-designed, in-house manufactured special subframe made of fine-grained steel for the crane and body. The fully welded and chassis-frame bolted subframe guarantees extreme torsional rigidity and perfect stability of the crane vehicle. The unique selling point is the design of the subframe. Execution is of the highest quality and painted in chassis color. • Mounting/bolting the crane and main outrigger beam to the subframe, installation of all hydraulic and electrical connections. Mounting position: front • Drop-side platform body made of steel/welded structure, removable • Approx. length 380 cm, width approx. 248 cm • Platform body painted in RAL shade (chassis color) • Removable aluminum drop sides, brand Suer, height 600 mm, anodized finish with steps, Kinngripp stakes removable • Standard platform floor with welded 4 mm steel chequer plate, painted in RAL (chassis color) • 6 retractable lashing points, 2500 daN each per side, in slotted profile with flexible arrangement • 4 x chain lashing holders 6500 daN (2 front, 2 rear of the body) • Robust front wall consisting of welded frame, welded 4 mm steel sheet and 5 accessory hooks, approx. front wall height 1300 mm, steel painted, with 2 folding lashing eyelets for tension belts, welded on • Covering panels, mudguards from aluminum chequer plate (sandblasted, powder-coated and painted) RAL tones to be specified. • 2x toolboxes BROSSBOX, made of aluminum chequer plate (sandblasted, powder-coated, and painted), RAL tones to be specified, size and arrangement depend on wheelbase and space available • 1x BROSSBOX toolbox, between crane and front wall • Multifix stake pockets, 2 rows (as agreed), spaced approx. 80 cm from front and rear wall • Brackets (for outrigger pads, crane plates) made from galvanized steel • Additional stabilizer mounted underneath the chassis • Installation of underrun protection at the rear and the additional stabilizer, including installation of hydraulic and electrical connections • Duomatic and red/yellow connections, front for semi-trailer as well as rear for trailer New crane, type FASSI F545 RA 2.27, continuous rotation, fully installed, configured and parameterized, with 7 hydraulic extensions and JIB L214 with 4 hydraulic extensions Additional Equipment and Crane Accessories: • 5 x crane outrigger pads with brackets, layout as per production drawing Gksdpfx Asxvv E Eeb Uef • AWC (automatic rope length control) • Operating instructions, maintenance manual and crane inspection book Lighting: • 2 x integrated LED-AS in the front wall • 2 x rotating beacons on FH roof • 2 x strobe lights in the engine hood • 2 x LED underbody lights at the rear, left and right, arrangement to be agreed • 4 x LED-AS, 2 left and 2 right under the superstructure in the B

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete inventory of vehicles available for immediate and short-term delivery on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis, stepped: * Special steel frame made from high-strength fine-grained steels, electrically welded at connection points * Generously dimensioned outer frame. 4-axle configuration * Wheel covers over the axles with spray suppression * All steel parts sandblasted * Side underrun protection made of anodized aluminum mounted * Increased point load approx. 30,000 kg over approx. 4,000 mm * Special construction in the stepped area for the longest possible low-bed length in combination with AluLeg drop supports instead of telescopic support legs, maximum rear swing clearance of the tractor unit approx. 2,100 mm Special body with rear stake extension: * DINKEL – special body * Self-supporting aluminum roof beam / profile approx. 120 x 100 mm, sliding roof with plastic flaps * Rear stakes extendable for loading/unloading up to approx. 4,200 mm * Three sliding stakes per side with elastic relief * Additional intermediate stake lockings in roof beam and parked position, via pull cable and spring bolt * DINKEL – mechanical lift roof, height-adjustable * Lift roof height approx. 400 mm, operable from both sides or one side without opening the opposite side * Additional height adjustment of approx. 480 mm in approx. 40 mm increments by adjusting the stakes * Front cover at bulkhead for driving operation under the tarpaulin up to a total height of approx. 4,400 mm * Four rows of stackable approx. 150 mm aluminum slats on the side, 450 pockets below, four rows of single pockets above. Only three rows of slats in the raised platform, spacings evenly distributed Floor: * Approx. 27 mm special waterproof bonded beech phenolic plywood, rough surface * Steel sheet in the wheel well area. Suitable for forklift traffic as per DIN standard * Outer frame flush with deck surface Brakes: * WABCO air brake system with EBS according to EC Directive 71/320, including PREV (Parking-Release Safety Valve) * Spring-loaded brake cylinders as parking brake * WABCO Smart Board with mileage counter and axle load display * Including WABCO tire pressure monitoring system Axles: * 4 x 10,000 kg SAF with drum brakes in low-loader design * Air suspension with lift and lower device, total lift approx. 230 mm * Third and fourth axles as friction-steered trailing axles with electric and mechanical lock Twin tires: * 235/75 R 17.5, 16-ply. Make of our choice, including spare wheel holder * Without spare wheel Lighting: * According to EU regulations, including LED side marker lights * Position lamps in LED design * 2 additional reversing lights * 2 work lights on the inside front wall, upper section Paintwork: * Chassis and body in one color, RAL 3002 carmine red * Intermediate stakes, axles KTL-coated black * Corner stakes hot-dip galvanized * Plastic parts black * Galvanized parts unpainted * Rims in factory silver Gedpfxjwx Dbis Ab Uskf Special equipment included: * 15-pin electrical supply cable * Air suspension in ECAS design, operated on the trailer * Oversize signage front and rear in galvanized, infinitely telescopic design with installed marker lights, including sockets for rotating beacons (small signs) * Additional external release for sliding roof frame lock * 4 stake adapters for special outer frame profile, to lock intermediate stakes as needed * PVC sliding tarpaulin, color similar to RAL 9

Condition: new, Automatic sheet metal & profile shot blasting machine It is preferred for surface cleaning works of products such as sheet metal, NPI, NPU, angle, profile etc. Gjdsghaywjpfx Ab Uekf The parts to be sandblasted move with the help of roller conveyors located at the entrance and exit of the machine. Turbines are placed in the machine body at appropriate angles so that the part surface can be sandblasted from the bottom and top. Its distinct advantages are that the products can be sandblasted quickly in length, semi-finished and finished products that can move on the roller conveyor, and the conveyor system. The digital speed control we use in our machines can be adjusted for each loading according to the piece type and the desired sandblasting surface. The machine is designed and manufactured according to the size, weight and daily number of the parts to be sandblasted. Conveyor lengths can be lengthened or shortened upon request.

Condition: refurbished (used), Year of construction: 2019, operating hours: 189 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 150 l, battery voltage: 36 V, The Kärcher B150R D90 Dose was manufactured in 2019 and has only 189 operating hours. We have completely overhauled the machine; every component has been cleaned and tested for proper functionality. The suction bar, base plate, and bumper have been sandblasted and newly powder-coated in our workshop. New squeegee blades on the suction bar ensure perfect water pick-up performance. Gkedjxx S Dcspfx Ab Uof The machine is fitted with six new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. Additionally, the Kärcher B150 R features a cleaning agent dosing system that precisely meters and introduces detergent during the cleaning process. The Kärcher B150 R is ideal for medium to large areas such as logistics halls, workshops, or underground car parks. Technical data: Working width: 90 cm Fresh water tank: 150 liters Suction width: 118 cm Weight: 957 kg

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 8-10 weeks after receipt of payment! ✅Important note: If you would like to receive a quote for a blast cabinet, please use the blast cabinet configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ 💥 SR-LINE – Industrial blasting rooms for XXL applications 💥 🔧 Maximum performance, robust construction, sophisticated design! Whether railway wagons, construction machinery, aircraft, or military vehicles – with our SR-LINE blasting rooms, you can process even the largest and most complex workpieces reliably and efficiently! Our blasting rooms offer a safe, clean, and high-performance environment for every type of surface preparation – be it cleaning, roughening, or smoothing. _____ 🧩 Complete system with all essential components: ✅ Spacious main cabin with rubber lining to protect against wear ✅ Emergency exit doors with safety windows ✅ High-performance sandblasting pots in various sizes ✅ Pneumatic or mechanical abrasive recovery system ✅ Efficient dust collection system to maintain air quality ✅ Aftercooler, filter units, and robust steel construction ✅ Main control panel for centralized control ✅ Lighting system for perfect visibility in the room ✅ Optional: Overhead cranes, workpiece trolleys, wall-mounted multi-axis units for improved handling _____ ♻️ Economical & sustainable thanks to recovery system The used blasting abrasive is collected automatically or manually and returned to the cycle – saving resources made easy! _____ 🔒 Safety & comfort according to EU standards Our systems comply with applicable CE and safety standards and are equipped with optional sound insulation for a more pleasant working environment. 💨 Fresh air systems with fans or suction lines ensure optimal air supply during the blasting process. _____ 📦 What does the SR-LINE blasting system include? • Blasting cabinet • Workpiece entry door & operator door with panel • Interior lighting & rubber lining • Blasting pot & abrasive container • Recirculation system with scraper blades Gedpfxsghawms Ab Uokf • Dust filter & aftercooler • Hoses, lines & main control panel • Robust support structure ⚠️ Compressor and compressed air tank must be purchased separately. A suitable air duct is recommended. _____ 🚀 Why SR-LINE? ✔️ Customized planning for your application ✔️ Extremely durable materials & components ✔️ Designed for high performance and continuous operation ✔️ Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞 Contact us now for a customized quote – we'll be happy to advise you! 🛠️ SR-LINE – Your solution for large-format blasting technology. ☀️ 2-YEAR WARRANTY ☀️ ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️