Used Sbp for sale (74)

Condition: good (used), Year of construction: 2014, Offer consisting of: Heidelberg Stahlfolder KH78/82 with pallet feeder PFH82, built in 2014, including SBP-66 vertical sheet delivery, 4 pockets, 2 swords, horizontal pocket. Hedpfx Ajv Htx Ujacsw

Condition: used, Year of construction: 2006, grinding diameter 350 mm grinding length 1000 mm Hsdpfx Aast Ii Nbjcew centre height 175 mm weight of the machine ca. 3,5 t Machine completely overhauled with 12 months warranty Mechanically and optically like new Photos from the last overhauled machine with different options Fanuc 21i control -Grinding head UR 1-2-3 external/internal/plan -Axis automatic 1° Hirth serration -Active longitudinal positioning KEL-POS Movomatic -Semi-automatic balancing device KEL-BALANCE -Grinding wheel equipment left 400mm diameter -Grinding wheel equipment right 300mm diameter -Internal grinding unit with belt drive -Tailstock with micro-adjustment -fine adjustment upper table -Paper belt filter SBP4 240l

Year of construction: 1998, condition: like new (used), Round pile feeder, first folding unit TD78/4-1 4 pockets, second unit TD66/4-2,4 pockets, 3 unit knife Stahl EF63 (1984), SBP 80 press delivery, no pump machine was on in house air supply Hjdjd Tnxlepfx Aacsw

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Equipment: compressor, Pallet feeder 6 buckles 2 knives Hedpfx Aasw D Ur Ascjw 1 side buckle SBP 66 press delivery Compressor Glue unit

Condition: used, Year of construction: 2004, Folding machine Heidelberg-Stahlfolder KD 78/6KZRL Hodpfjvfmckox Aacjw Year: 2004 Description: - 32 page folder Feeder - Pallet feeder: PD-78 - Pump Folding unit Heidelberg-Stahlfolder KD 78/6KZRL - Parallel fold unit with 6 buckle plates - Perforating shaft - First cross fold - Second cross fold to the left and right - Third cross fold left or right (moveable) - Noise hood over the entire folding section Delivery Heidelberg-Stahlfolder SBP.D-66 + MKE - Horizontal stack delivery with pressing and marking device

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 Hsdpfx Aajd Iq S Recew • upright stack delivery with pressing SBP 66

Condition: used, Year of construction: 2003, Overview  The complete filling line for big size PET bottles is located at a mineral water plant and was used for filling water. The line has been regularly serviced and is in very good condition. Output: 5,000 bph List of machines Blow moulder | Nissei ASB | NB-40MC | 2003      Preforms feeder      Preforms tipper      Transporters | AVE | 2004      Injection and blowing | Nissei ASB | PF4-1BH |2000      Dryer Moretto | 2000   Loader Moretto | 2000   Heater Moretto | 2000   Transporters | AVE | 2004      Lot Coder | Marken | Smartlase 110i | 2009      Rinser - Filler - Capper | GyM | Tribloc 9-12-3| 2012      Labeller|Auxiemba | Basic 720-6-HM-iz  | 2010 | 7000 bph Shrink Packer | SMI | ST-2000 | 2009 | 30 packs / min Handle applicator | SMI HA 25Sx | 2012 | 25 packs /min Palletizer | Lapeyra | RP1C | 1992 (retrofit as CE RD1215) Wrapping|Impropak | Girospak 747 SBP | 1990 (retrofit as CE RD1215) Transporters | AVE | 2000      Hjdpfjtuyq Asx Aacsw

Condition: good (used), Year of construction: 2009, functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, spindle motor power: 22,000 W, spindle speed (min.): 3,800 rpm, spindle bore: 80 mm, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, Okuma Macturn 350 2SW-1500 Big Bore main spindle, machine type CNC turning-milling center Make / manufacturer Okuma Okuma Model / type MacTurn 350 2SW1500 BigBore Year of manufacture 2008 / 2009 Control OSP P 200 L IGF One Touch Advanced + CAS Spindle turning time 6437 h Technical data Max. turning diameter: 550 mm Max. turning length: 1,500 mm Travel path of upper turret (milling spindle): X-axis: 505 mm/190 mm/1670 mm Y-axis: 190 mm (+95 /-95) Z-axis: 1670 mm W-axis: 1680 mm Travel path of lower turret: X/Z 210 mm/ 1670 mm Main spindle “Big Bore” version Spindle motor main spindle 22 kW, 412 Nm Max. speed main spindle 3800 rpm Spindle nose main spindle JIS A2-8 Spindle passage 80 mm Max. bar diameter: 71 mm C-axis 0.001 ° Counter spindle “Super Big Bore” version Spindle motor counter spindle 22 kW, 412 Nm Max. speed counter spindle 3300 rpm Spindle end counter spindle JIS A2-8 Hsdpovta Rdsfx Aacew Spindle passage 80 mm Max. bar diameter: 71 mm Milling spindle Spindle motor milling spindle: 11 kW Max. speed milling spindle: 12000 rpm Tool holder: HSK 63 B-axis: 0.001° Tool magazine: 44 stations Lower turret Tool positions: 12 Tool holder: VDI-40, Driven tool stations: 12 positions Max. power of driven tools: 7.5 kW Max. speed of driven tools 4500 rpm Machine weight: approx. 15,000 kg Space requirement 6000 x 3500 x 3000 cm Other features - High pressure cooling 40 bar - Chip conveyor Interlit ISF 614 - Heavy crane filter Interlit SBP 4 - Touch Setter - Helical Cutting - 4 Extra M-Code Set - 2x hydraulic power chuck SMW BH-D 315-95 diam. 250 mm - DNC- T1 interface - RS 232 C interface - Chuck blow-off function main counter spindle - TAS -S + TAC-C Status report after commissioning in Bergisch Gladbach Geometry measurement results Reverse play XA - axis 0.015 mm Reverse play XB - axis 0.015 mm Reverse play ZA - axis 0.020 mm Reverse play ZB - axis 0.020 mm Reverse play Y - axis 0.010 mm XA - axis measured with measuring mandrel at 300 mm 0.02, YA at 300 mm 0.007in T1,T2, T3 B-axis: alignment and function good M-drive lower turret: tested and good Milling spindle: tested up to 6000 rpm, no abnormalities Main/counter spindle tested , no abnormalities High pressure pumps function well, no abnormalities Accessories - 2 x hydraulic crane chuck SMW - pallet with 16 driven tool holders, 10 HSK 63 holders, 3 VDI 40 holders - lifting hook on the front - all original axle locks Neff The Okuma specialist and NeffBuy We are also happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as instruction and subsequent service. We operate Okuma CNC service throughout Europe, both electronically and mechanically, and on top of that we have a 1200 m2 inventory of all Okuma spare parts, please visit us on our homepage.

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992 Hodpfxowv D Svo Aacew

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: Hsdpfsv Ha Uijx Aacew CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, functionality: fully functional, total length: 1,200 mm, total width: 1,150 mm, total height: 2,110 mm, TECHNICAL SPECIFICATIONS - 304 stainless steel tank - Model SBP1500 - Cold-rolled stainless steel tank - Brushed exterior finish - BA interior finish - Pickled and passivated welds - Cold-pressed bottoms with optimised profile, thickness 2 mm - Automated TIG welding process - Hot-dip galvanised steel frame - Frame can be handled by forklift truck and pallet truck EQUIPMENT - Manhole diameter 400 mm - Cover with quick-release lever closure and EPDM seal - Total drainage with 40 Macon stainless steel ball valve Hedpfx Ajw Tk Ttoacjw - PVC relief valve - Nameplate DIMENSIONS - Height: 2110 mm - Length: 1200 mm - Width: 1150 mm

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder Hodpfx Aasd Iq S Uscsw • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Hsdpfeud U D Ijx Aacsw Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Available: at short term

Condition: used, Year of construction: 1999, machine/vehicle number: 103638, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD 78-4-KZ Year 1999 - Serial-No. 103638-258036 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 3 Schwerter links/rechts Auslage / 2. Station 3 knives left/right delivery Stehendbogenauslage / Delivery Stacker Stahl SBP 46 Rietschle Kompressor / Rietschle Compressor Inklusive Handbücher / Manuals included Online-Video-Inspection by Skype-Video Hjdpfx Aaemikq Ajcew We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1999, 6 pockets 2 swords Standing pile delivery SBPD mobile sword Hodpfx Aaewv D Iwecjw

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: FH.FNJF-00296 / 1224402827, paper weight (min.): 40 g/m², paper weight (max.): 250 g/m², paper width (min.): 150 mm, paper width (max.): 780 mm, paper height (min.): 180 mm, paper height (max.): 1,200 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Maximum paper format: 780 x 1,200 mm Minimum paper format: approx. 150 x 180 mm Hjdpfxev Imuxe Aacow Paper weight: 40 - 250 g/m² Maximum mechanical speed: up to 230 m/min Folding types: parallel fold, zigzag fold, altar fold, window fold, etc. EQUIPMENT - 6 folding pockets for versatile folding types - 1 blade for additional folding options - Heidelberg PFH-82 pallet feeder for continuous sheet feed - Steel vertical sheet delivery SBP 66.D-MKE for precise sheet placement - Automatic settings for quick job changes - Touchscreen operation for easy control

Year of construction: 2011, condition: like new (used), Please notice that the entire factory with land and buildings is for sale! List of devices for the pellet production line No. 1 (with a drying line) No. Device name set. Description DRYER LINE: - bale feeder - length 9m - Rotogrin RSC B 36-132 shredder - chain scraper of wet raw material - length 12m - V500 wet raw material screw conveyor - 4 kW - drying cyclone with a rotary dispenser - 4 kW - dryer exhaust fan - 55 kW - a stove with an emergency chimney - 2.2 kW - SBP-2500 dryer drum - 5.5 kW - fuel dosing system with a container + burner - 5.9 kW - ignition detection system - extinguishing system - electrical installation, sensor system, wiring - control cabinet and automation Passat straw chopper 3 x 15 kW Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan 4 bar Buffer tank with feeders Conditioner ANDRITZ CM 1101 11 kW, 750 rpm Granulator PM 30 ANDRITZ 315 kW, 1500 rpm Automatic Roller Lubrication System Pellet cooler MOGENSEN G 1014 Screener A set of transport routes for the production line (pneumatic feeders, scraper and bucket conveyors MINIMAX spark detection system with control unit Hodpfx Aajim I Ruscsw Control panel with software Power and control cabinets, wiring List of devices for the pellet production line No. 2 No. Device name set. Description Bale feeder - Length 9 m Rotogrin RSC B 36-132 chopper Beater mill ANDRITZ OPTI 900 - 250 kW, 3000 rpm JESMA EFF 64/2400 WB filter with fan - 4 bar ANDRITZ CM 1101 conditioner 11 kW, 750 rpm Granulator PM 30 ANDRITZ + lubrication system - 315 kW, 1500 rpm Pneumatic feeders from the hammer mill to the filter Power and control cabinets, wiring

Year of construction: 1994, condition: good (used), machine/vehicle number: 9067/94-216119 , Palletfeeder SBP.M 66.2 6 Pockets 2 Folding Knives 1 Side Pocket Up to 32 pages folding Largest Sheet Size X : 780 mm Largest Sheet Size Y : 1020 mm Min. Sheet Size X : 140 mm Min. Sheet Size Y : 180 mm Hodpfx Aajfh Nq Tjcow

Condition: new, Container Model CON-13 | Residential Container | Site Container | Storage Container | Container Houses Office Container Model CON-13 Model CON-13 (240x600) Dimensions: • Width: 2.40 m • Length: 6.00 m • Height: 2.61 m • Square meters: 14.40 m² NEW PRODUCT! Our service includes secure packaging and insurance. "Wolf Tiny Container" protects you against any damage in case of a problem. Directly from the manufacturer Shipping - Germany-wide: €650 flat rate Description: • Equipment: 1 room; 2x windows, 1x entrance door • Insulation: 72 mm ceiling, 50 mm wall, 50 mm floor Hodpfewnrpmex Aacjw • All electrical installations included (distribution board, 230V sockets, ceiling lights, switches, cable ducts, cables) • Vinyl flooring 2-3 mm – robust • Crane eyes included for crane unloading • Custom room layout possible _____ Additionally, you can order the following: 1. Water heater (incl. installation & sealing): €714.00 2. WC window (60x40 cm, incl. installation): €255.00 3. Urinal (incl. installation & piping): €408.00 4. Automatic ventilation: €250.00 5. Frost guard: €86.70 6. Heater (electric, 1500-2500 W, incl. installation): €285.60 7. Additional floor drain: €120.00 8. External CEE socket (incl. cable & installation): €175.00 9. Custom color – full coating: €459.00 10. Custom color – frame only: €250.00 Blsbptjwnxf Isiumzsi Prices are net plus statutory VAT.

Condition: good (used), machine/vehicle number: 231127, infeed width: 780 mm, Equipment: compressor, Pallet feeder with Tremat 4 folding pockets Hsdpew N Ntksfx Aacsw 3 knives 1 side pocket after cross fold Compressor Press delivery SBP 46.D No. 23152

Condition: used, Year of construction: 2008, Year of manufacture: 2008 Condition: good Hedpfxoww H U No Aacjw Configuration: manual pocket adjustment manual roller adjustment pallet feeder PFH82 folding unit – 4 pockets knife unit with 2 folds + inserted pocket upright stack delivery – SBP46 compressor

Condition: good (used), Year of construction: 2019, functionality: fully functional, cooling capacity: 26.3 kW (35.76 HP), type of cooling: air, overall weight: 270 kg, total width: 750 mm, total length: 1,750 mm, total height: 1,450 mm, warranty duration: 6 months, Aircooled chiller AERMEC ANL102 Z 26.3 kW Cooling capacity: 26.3 kW / 7.48 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. PANASONIC C-SBP160H38B (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.75x0.75x1.45 m. Weight: 270 kg. Working hours: 8000/8000 h. Hodow Ra Rvspfx Aacjw Condition: Good

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Heidelberg Stahlfolder TD-112 Year: 2009 Mach. no. 1224427271 PD 112 Topline pallet feeder Performance package PD 112 (double valve suction wheel, more powerful compressor, additional hold-down device) 1st station 4 folding pockets 2nd station 112cm 4 folding pockets Twin system in the 2nd station for double-flow production including transfer table, short feed ruler, 2x split sheet stop pocket, 1x split separate switch, second light sensor each at the folding unit output 1st and 2nd station, additional transport and drive rollers 3rd station 78 cm 4 folding pockets SBP 86 Delivery Automatic sizes Soundhoods Compressor Hodpewpgpdefx Aacsw Machine is in very good condition!!!

Condition: used, Year of construction: 2007, functionality: fully functional, MBO K660 Hjdpfx Ajwpgkueacjw ENDLESS LOADING TABLE 6 BAGS+2 KNIVES WITH ALTAR FOLDING+SBPA 46 STAND-UP CURTAIN UNLOADER