Used Scara Robots for sale (2,371)

Condition: like new (used), Year of construction: 2011, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 111313, overall weight: 520 kg, load capacity: 15 kg, arm reach: 2,800 mm, pivoting range: 320 °, controller manufacturer: FANUC, controller model: R-30iA, teach pendant manufacturer: FANUC, control cabinet width: 800 mm, control cabinet height: 1,360 mm, input voltage: 400 V, input current: 20 A, type of input current: AC, repeat accuracy: 2 mm, This is a painting robot from Fanuc. It has very special equipment. It was once intended for painting blades for wind turbines. For this purpose, it was installed on a 60 m long rail, which had another rail with which the robot could travel up and down. For this reason, two large additional amplifiers are installed in the control system. This is why the encoder break module is also present twice. Another special feature of this robot is that motors are installed in the shoulder to control two gear pumps. So a 2-component mixture on the robot is no problem. The robot was never actually used. The operating hours only occurred because the robot was live. This was also confirmed to me by the operator of the system (Enercon). The actual servo ON time is 0.2 hours. The robot has slight soiling, but is practically as good as new. Unfortunately, the teach pendant and the teach cable are very dirty. However, this could be replaced if necessary. The cable length between the robot and controller is 5m and can be plugged into the controller. This is also special. We give a 1-year commissioning guarantee. Nodpfx Ahstu Hpqe Esdc We can help with transportation and installation. It is mounted together with the controller on a special pallet 2500x800x1600mm ready for transportation. We have two of them. The price is for one robot. At the moment it is configured as right-armed and right-handed. However, this can easily be changed without mechanical conversion. The device can be inspected under voltage at Paintrobotics.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 2,239 h, functionality: fully functional, machine/vehicle number: 796105 + 796713, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, No reserve price - guaranteed sale at the highest bid! Two robots are being auctioned together (built in 2006/2010; operating hours: 147/2,239 h; serial numbers 796105/796713) Nsdpfx Ahowmcqxo Esdc TECHNICAL DETAILS Maximum reach: 3,076 mm Nominal payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Speed of axis 2 (A2): 69°/s Speed of axis 3 (A3): 69°/s Speed of axis 4 (A4): 77°/s Speed of axis 5 (A5): 76°/s Speed of axis 6 (A6): 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Control: included

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, 3 Rotary Indexing Systems + 3 Linking Robots OVERVIEW - Bar feeder - Rotary indexing system 1 (cutting + machining clamping 1) - Rotary indexing system 2 (machining clamping 2) - Placement on conveyor belt - Marking - Deburring unit - Stacking cell with ejection of measuring parts TECHNICAL DETAILS Process description Step 1: Manual placement of bars onto the bar magazine Step 2: Automatic insertion of the bar and cutting off the workpiece Step 3: Robot takes the workpiece from the saw clamp and transfers it to the clamping fixture of rotary indexing system 1 (station 1) Rotary indexing system 1 (machining clamping 1) Station 2: Contour milling left and right Station 3: Contour milling top Station 4: Slot milling (2x), drilling Ø 6.5 mm (4x) Station 5: Drilling Ø 5 mm (4x), threading M6 (2x), slot milling 20 × 5 mm, drilling Ø 7.5 mm (2x) Station 6: Transfer to second system Rotary indexing system 2 (machining clamping 2) Station 1: Robot takes the part from station 6 of system 1 and places it into the clamping fixture of the second rotary indexing system Station 2: Contour milling bottom Station 3: Slot milling (2x) Station 4: Contour milling bottom (2x) Station 1 (again): Unloading onto conveyor belt Cycle time: 25 s Tolerance: +5% Bar feeder Bar magazine: for 2000 - 6000 mm bar material Magazine width: approx. 2100 mm Insertion height: approx. 1200 mm Parts buffer: 10 bars Rotary indexing system 1 - SEMA RTA 55/6-SA-NC-R Control: Siemens Sinumerik 840 D sl Spindle units: 5 Tool turret: 1 Feeds: 14+1+5 NC axes Rotary indexing system 2 - SEMA RTA 55/4-NC-R Stations: 4 Control: Siemens Sinumerik 840 D sl Spindle units: 4 Feeds: 9+1+3 NC axes Discharge conveyor Chain conveyor: workpiece carrier made of plastic Incline: approx. 3° Length: 8,000 mm Part inquiry: at loading station / marking station / unloading station Nodpfx Aowqf R Njh Ejdc Rotary indexing system 3 - SEMA REA 30/5-6S-NC-R Number of positions for deburring: 5 Control: Siemens Simatic S7 Loading station: 1 Machining units: 6 Extension of deburring unit: blowing off of workpieces Robot: for loading and unloading the deburring unit, as well as stacking with SPC drawer MACHINE DETAILS Noise level: 80 dBA Connection: 400 V, 50 Hz Model RTA55/6-SA-NC-R Connected load: approx. 95 kW Dimensions (L × W × H): 5,500 × 4,400 × 3,700 mm Weight: approx. 32,000 kg Model RTA55/4-NC-A Connected load: approx. 65 kW Dimensions (L × W × H): 4,500 × 4,500 × 3,700 mm Weight: approx. 20,000 kg Model REA 30/5-6S-NC-R Connected load: approx. 30 kW Dimensions (L × W × H): 3,000 × 3,000 × 3,000 mm Weight: approx. 10,000 kg

Condition: refurbished (used), Year of construction: 2009, overall weight: 48 kg, Stäubli RS 60 with CS8 C control / 2 pieces available, price per piece. The Stäubli RS 60 robot with the CS8 C control is the ideal solution for demanding and precise assembly tasks. Thanks to its compact design and high-precision repeatability, it is particularly suitable for industrial applications where precision and reliability are crucial. Technical details: • Load capacity: Up to 2 kg, ideal for light to medium loads. • Axes: 4-axis robot for flexible movements and precise positioning. • Working range: 600 mm, ideal for compact work environments. • Inner radius: 166 mm, for working in tight spaces. • Repeatability: +/- 0.01 mm, guarantees maximum precision. • Dimensions (W x H x D): 810 x 976 x 710 mm. • Robust yet flexible. Ndjdpfx Ahevvacle Eoc Scope of delivery: All parts and accessories included are shown in the pictures. Condition: Used, but still fully functional and ready for use. Note: All technical data has been carefully compiled. Subject to changes or errors.

Year of construction: 2012, condition: refurbished (used), LINEAR AXIS FOR ROBOTS: - LENGTH 11M 1 PIECE - LENGTH 8M 1 PIECE - LENGTH 6M 1 PIECE IN TOP CONDITION Ndsdpfx Ajhy Amcjh Eoc

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 4326000, 4326003, overall weight: 53 kg, load capacity: 6 kg, arm reach: 726 mm, controller manufacturer: kuka, controller model: KR C5 micro Kleinrobotersteuerung, Equipment: documentation/manual, 01.Oct.25: Updated to SCARA type. The handout has been revised accordingly. Location: Ohio, USA!! 1 brand new, KUKA robot, still in original packaging, 0 operating hours. 2 units available. Picture is for illustrating the machine category only. The unit is in its original packaging. 0 operating hours. Ndedpfx Asxapmdsh Eoc Clarification required as to whether the existing original packaging is still suitable for final shipment. Please provide your offer price and desired quantity. Sale only possible within the USA, Canada, and Mexico. Sales to the EU and other countries only upon request. For technical specifications, please refer to the handout. No packaging; any warranty claims are excluded. We assume no liability for the correctness of the technical data, completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 2003, The robot originates from the dismantling of a welding system. We have inspected it and operated it manually. It is in very good condition. The batteries have just been replaced. The Arctool is installed, but this does not prevent the robot from also performing handling tasks. The machine can be inspected live at our premises. The price is so low because we need space. Ndodpfx Ahswbak So Esc If you need technical support, we are happy to help.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 797256+797257+797255+797259, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Four robots will be auctioned together (built in 2013; operating hours 8,680/9,424/9,626/10,458 h; serial numbers 797256/797257/797255/797259) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Double package with robots built in 2013 (search ID=18971586) Single robot built in 2014 with 543 operating hours (search ID=18971661) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Ndedpfxjwc Ucfo Ah Eoc Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: used, Year of construction: 2019, Axis specifications Arm length 300 mm 300 mm 200 mm 300 mm – Rotation angle +/-130 ° +/-145 ° – +/-360 ° AC servo motor output 400 W 200 W 200 W 200 W Ndsdpowdtl Iefx Ah Ejc Deceleration mechanism Speed reducer Harmonic drive Harmonic drive Ball screw Harmonic drive Transmission method Motor to speed reducer Direct-coupled Speed reducer to output Direct-coupled Repeatability Note 1 +/-0.01 mm +/-0.01 mm +/-0.004 ° Maximum speed 8.4 m/sec 2.3 m/sec 1.7 m/sec 1700 °/sec Maximum payload 10 kg Standard cycle time: with 2kg payload Note 2 0.46 sec R-axis tolerable moment of inertia Note 3 0.30 kgm2 User wiring 0.2 sq × 20 wires User tubing (Outer diameter) ϕ 6 × 3 Travel limit 1.Soft limit 2.Mechanical stopper (X,Y,Z axis) Robot cable length Standard: 3.5 m Option: 5 m, 10 m Weight 31 kg Note 1. This is the value at a constant ambient temperature. (X,Y axes) Note 2. When reciprocating 300mm in horizontal and 25mm in vertical directions. Note 3. There are limits to acceleration coefficient settings. See P.539.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 797273 + 797258, load capacity: 420 kg, arm reach: 3,076 mm, pivoting range: 350 °, controller model: KR C2 edition2005, Two robots will be auctioned together (built in 2013/2013; operating hours 2,154/14,355 h; serial numbers 797273/797258) Kuka robots now available at attractive package prices. Please also note the other auctions: Double package with robots built in 2006 and 2010 (search ID=18971571) Single robot built in 2014 with 543 operating hours (search ID=18971661) Four-pack with robots built in 2013 with an average of 9,500 operating hours (search ID=18971716) Should robots from the other auctions remain unauctioned, the highest bidders in the other auctions have the right of first refusal! TECHNICAL DETAILS Maximum reach: 3,076 mm Rated payload: 420 kg Additional arm load: 50 kg Maximum total load: 920 kg Number of axes: 6 Installation position: Floor Version: Foundry Position repeatability: ±0.08 mm Control system: KR C2 edition2005 Axis data Axis 1 (A1): ±185° Axis 2 (A2): +110°/−40° Axis 3 (A3): +60°/−184° Axis 4 (A4): ±350° Axis 5 (A5): ±118° Axis 6 (A6): ±350° Speed at rated payload 420 kg Speed of axis 1 (A1): 69°/s Axis 2 (A2) speed: 69°/s Axis 3 (A3) speed: 69°/s Axis 4 (A4) speed: 77°/s Axis 5 (A5) speed: 76°/s Axis 6 (A6) speed: 120°/s MACHINE DETAILS Weight (without controller), approx.: 2,375 kg Operating temperature: +10°C to +55°C Nedpewc T Tcofx Ah Esdc Protection class: IP 65 Robot footprint: 1,240 mm × 1,240 mm Power supply: 13.5 kVA Noise level: < 75 dB Transformer: included Controller: included

Condition: refurbished (used), Year of construction: 2020, The Epson LS6-602S, a 4-axis SCARA robot with a 6 kg payload capacity and 600 mm reach, has been assessed and found to be in optimal condition. Prior to shipment, the robot will undergo comprehensive testing and meticulous packaging procedures to ensure its integrity during transit. Ndjdjwdl S Hepfx Ah Eoc

Condition: good (used), Year of construction: 2000, Connection value: 430kW Dimension: Njdpoip T T Hefx Ah Eedc Total length: 10750mm Width: 3400mm Height: 3900mm

Year of construction: 2025, condition: used, Technical details: liter capacity: 21 l/min Pressure of coolant: 50 bar rated current: 20 A Clean water tank capacity: 300 l total power requirement: 16 kW weight of the machine ca.: 200 Kg dimensions of the machine ca.: 1,2 x 0,8 x 1,4 m We are importers for FRASCARA high pressure coolant systems Nodpfxovfdmys Ah Esdc Frascara delivers compact, mobile and reliable high pressure coolant / filtering systems with 50 or 70 bar 21 l/min. We can provide up to 3 pressure levels controlled by M-Functions. Oil operated systems are available also. Areas of application: Cleaning of coolant lubricants, emulsions and cutting oils without filter residues. Installation on machine tools for individual machines Function: The lifting pump inside the machine tank with minimum 2bar / 20 l/min capacity presses the contaminated water through the twin filter unit into the clean water tank. of the Frascara unit, from where it is pumped back through the spindle by a 50 bar pump. When the filters are getting clogged, an alarm is triggered and the operator switches to the second filter bank. The first set of filters then can be cleaned while the system is in full operation. The filters are made of wire mesh and can be reused. The system is very quiet and extremely reliable! *

Condition: used, mileage: 444,000 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2018, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, electronic stability program (ESP), immobilizer system, parking heater, This well-maintained VW T6 Transporter from 2018 offers seating for up to 9 occupants and stands out with its versatile features. The 150 HP diesel engine with all-wheel drive ensures reliable performance in any weather conditions. With only one previous owner and an environmentally friendly Euro 6 rating (green emissions sticker), this transporter is a solid choice for families or business users. Due to the mileage, the vehicle is preferably being sold to traders, businesses, or export customers. The manual air conditioning and auxiliary heater provide comfortable temperatures year-round. Practical features such as electric windows, heated seats, and a right-side sliding door enhance everyday usability. Safety is ensured with ABS, ESP, front airbags, and Isofix child seat mounts. The start-stop system contributes to improved fuel efficiency. * 150 HP diesel engine with all-wheel drive * Seating for 9 with black interior trim * Manual air conditioning and auxiliary heater * Only one previous owner, Euro 6 compliant * Payload 918 kg, braked towing capacity 2,500 kg * Electric windows and heated seats * Right-side sliding door for convenient access * Safety equipment: ABS, ESP, front airbags * Start-stop system for enhanced fuel economy * Electric windows * Seat heating * Auxiliary heater * Power steering Tuner/Radio: Tuner/Radio Climate control: Air conditioning * ABS * Electronic immobilizer * ESP * Isofix Nedpfexglcbex Ah Esdc * Start/Stop automatic

Year of construction: 2014, condition: used, Automatic cutting machine for PVC profiles loadingtabel for 6500 mm lenght unloading table Labelprinter Sawblade diameter 500 mm cuttinge angles -45°/90°/+45° Ndsdpfx Aexb U N Hsh Eec

Condition: new, AB-1510DEX Range 1500mm Lifting capacity: 6KG Supply voltage: 220v ±10%,1 phase, 50 Hz Source: AOTAI MAG-350RL (350A , Supply voltage: 380v ±10%, 3 phase, 50 Hz) After-sales and warranty service begins with the delivery of Njdpfju Tgwfjx Ah Eedc machine to the Buyer (consumable parts are not included in the warranty). Warranty period: (a) robot with controller - 12 months, b) welding source - 12 months, c) remote control (without screen) - 3 months.

Condition: used, Year of construction: 2007, Robot KUKA KR10scara R850 Z400 mechanics only Ndodpfx Ahew I Sd As Ejc Year of manufacture: 2007 Max. payload: 10 kg Max. working range: approx. 850 mm Scope of delivery: Robot mechanics only Used item – shows normal signs of use, fully functional. Further details and images available on request.

Condition: used, Year of construction: 2003, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. The binding machine can bind long materials together by knotted loops. Dq98On The machine is suitable for binding single and double strings. The binding machine can add any number of loops to long materials. The elastic cord keeps the joined materials together during transport. Ndjdpfx Ajvyhmtoh Eec

Condition: excellent (used), Year of construction: 2005, KUKA KR 30-3 Robot Controller KRC2 Brand KUKA Model KR 30-3 Robot Robot Year of manufacture 7/2005 Robot Robot Controller KRC2 Load capacity 30 kg Ndedpfxoqzw Dne Ah Eoc Reach 2033mm

Condition: good (used), Year of construction: 2004, The binding machine is suitable for binding long bar materials, long joined materials and materials with elastic or simple plastic wire. Long materials can be pushed through a tunnel in the middle of the machine. Nsdpfxevyhhqj Ah Esdc The binding machine can be used to bind long materials together using knotted loops. The machine is suitable for binding single and double strings. The binding machine can be used to attach any number of loops to long materials. The elastic cord holds the joined materials together during transport.

Condition: excellent (used), Extractor for "PERTICI" sawing center type Scarabeo Ndodpfxjvc Agmo Ah Ejc

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, load capacity: 35 kg, empty load weight: 570 kg, Equipment: documentation/manual, Welding robot with control cabinet & welding unit! TECHNICAL DETAILS Maximum payload: 35 kg Nodoxnw E Rspfx Ah Eodc MACHINE DETAILS Own weight: 570 kg EQUIPMENT Control cabinet Welding unit

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 605, rotational speed (max.): 3,000 rpm, grinding diameter: 12 mm, controller model: Robot CNC, workpiece height (max.): 100 mm, table diameter: 200 mm, TECHNICAL DETAILS Grinding capacity (diameter): Ø 0.025 – 12.7 mm Bar diameter: Ø 1.0 – 12.7 mm Grinding length: W15 (optionally W20) Number of wheels: 1 Table diameter: 200 mm Workpiece height: 100 mm Control system: Robot CNC Axes: 4 axes + 2 programmable robot axes Z-axis: 35 mm, resolution: 0.5 µm X-axis: 25 mm, resolution: 0.1 µm Y-axis: 286 mm, resolution: 0.5 µm U-axis: 15 mm, resolution: 0.1 µm Interpolation: Simultaneous linear interpolation of 4 axes, cylindrical interpolation of 2 robot axes Head Motor Power: 0.70 kW Speed: 300 – 3,000 rpm Nodpoxnzd Dofx Ah Ejdc Rough Grinding Power: 1.5 kW Spindle diameter: Ø 60 mm Grinding wheel diameter: Ø 200 mm Cutting speed: 30 m/s Finishing Power: 0.75 kW Spindle diameter: Ø 100 mm Grinding wheel diameter: Ø 150 mm Cutting speed: adjustable MACHINE DETAILS Total power requirement: 6 kW Machine weight: approx. 1.8 t Space requirements (L x W x H): approx. 1.83 x 2.04 x 2.1 m EQUIPMENT - Robot for loading and unloading - Fire protection system

Condition: as good as new (ex-display), functionality: fully functional, A complete carton packaging and palletising line with comprehensive accessories is being auctioned here! This is a demo machine that was only in operation for a few days! COMPONENTS OF THE PACKAGING LINE Packaging robot KUKA KR 50 R2500 Iontec Gripper Base Labelling robot KUKA KR 10 R110-2 Agilus Gripper 2 Labelling systems Peripheral components Pallet station Room triangle Lantech carton erector Conveyor technology by Interroll Safety equipment Protective enclosure Safety door Safety tunnel Light curtain Centralised control system COMPONENTS OF THE PALLETISING LINE Palletising robot KUKA KR 120 R3200 PA Gripper Nsdpfxjxhf Awo Ah Eedc Base Palletising software Flex Package Labelling robot KUKA KR 10 R1100-2 AGILUS Gripper Printwolf table printer Peripheral components Lantech carton sealer Lantech turntable stretch wrapper Conveyor technology Pallet dispenser BILA Pallet conveyor system by Interroll Carton conveyor system by Interroll Carton conveyor system NiO Interroll Safety equipment Protective enclosure Safety doors Programmable safety PLC Airlock at the pallet exit Protection tunnel Centralised control system Further details on the individual components can be found in the attached inventory list. The machine can be provided ready for free loading. Dismantling and loading costs amount to €48,000.

Condition: excellent (used), machine/vehicle number: E3360111111, REF: MM6276 Ndedexq Eppjpfx Ah Esc 1 x Robot Coupe high-speed cutter / emulsifier. Ideal for procssing 20-100 portions, this machine is designed for the preparation of texture modified meals. All foods, whether raw or cooked, sweet or savoury, whether entrees or mains, dessert or cheese, can be processed to various texture levels. Supplied with Blixer Arm and Serrated blade. Technical specification ⚙️ ✅ Model - Blixer 30 5400W. ✅ Serial number - E336011111. ✅ Timer function - 0-15 minutes. ✅ Input voltage - 400 V / 50 hz / 3 phase. ✅ Power - 5.4 kW / 11.6 Amps.